Bosch Appliances Water Dispenser VDA WMT User Manual

Indoor Minidome Wall and Pipe Mounts  
VDA-WMT/PMT-AIDome  
en Installation manual  
 
Indoor Minidome Wall and Pipe Mounts  
Safety | en  
3
1
Safety  
1.1  
Safety precautions  
WARNING!  
Medium risk: Indicates a potentially hazardous situation.  
If not avoided, this could result in minor or moderate bodily injury.  
CAUTION!  
Low risk: Indicates a potentially hazardous situation.  
If not avoided, this could result in property damage or risk of damage to the unit.  
1.2  
Important safety instructions  
Read, follow, and retain for future reference all of the following safety instructions. Heed all  
warnings on the unit and in the operating instructions before operating the unit.  
1. Safety check - Safety checks should be performed upon completion of service or repairs  
to the unit to ensure proper operating condition.  
2. Installation - Install in accordance with the manufacturer's instructions and in  
accordance with applicable local codes.  
3. Attachments, changes or modifications - Only use attachments/accessories specified by  
the manufacturer. Any change or modification of the equipment, not expressly approved  
by Bosch, could void the warranty or, in the case of an authorization agreement, authority  
to operate the equipment.  
1.3  
Important notices  
Disposal - Your Bosch product was developed and manufactured with high-quality material  
and components that can be recycled and reused. This symbol means that electronic and  
electrical appliances, which have reached the end of their working life, must be collected and  
disposed of separately from household waste material. Separate collecting systems are  
usually in place for disused electronic and electrical products. Please dispose of these units  
at an environmentally compatible recycling facility, per European Directive 2002/96/EC.  
Environmental statement - Bosch has a strong commitment towards the environment. This  
unit has been designed to respect the environment as much as possible.  
WARNING!  
For a secure installation use stainless steel or zinc plated fasteners.  
CAUTION!  
If these mounts are used outdoors ensure that the equipment they are used with is also  
suitable for outdoor use.  
More information  
For more information please contact the nearest Bosch Security Systems location or visit  
Bosch Security Systems  
Installation manual  
AM18-Q0631 | v1.0 | 2012.08  
 
Indoor Minidome Wall and Pipe Mounts  
Unpacking | en  
4
2
Unpacking  
Unpack carefully and handle the equipment with care. The packaging contains:  
Mount  
Teflon tape  
Anti-seize grease  
If equipment has been damaged during shipment, repack it in the original packaging and  
notify the shipping agent or supplier.The shipping carton is the safest container to transport  
the unit. Save it for possible future use.  
Bosch Security Systems  
Installation manual  
AM18-Q0631 | v1.0 | 2012.08  
 
Indoor Minidome Wall and Pipe Mounts  
Installation | en  
5
3
Installation  
This installation should be made by qualified service personnel and conform to the National  
Electrical Code and applicable local codes.  
3.1  
Installing the Wall Mount  
Figure 3.1 Wall Mount installation  
1. Determine location for wall mount.  
2. Use mount as template to mark location of mount holes on walls.  
3. Drill holes for anchors and install anchors into wall.  
4. Drill fifth hole into wall and center this hole to align with feed-through tube in mount.  
5. Use this hole to pull wires through feed-through tube.  
6. Assemble mount to wall.  
7. Connect all wires to camera.  
8. Pull any excess wire back into mount tube.  
9. Assemble camera to mount and fix with three (3) M5 screws (supplied).  
10. Install camera dome housing cover.  
Bosch Security Systems  
Installation manual  
AM18-Q0631 | v1.0 | 2012.08  
 
Indoor Minidome Wall and Pipe Mounts  
Installation | en  
6
3.2  
Installing the Pendant Pipe Mount  
Figure 3.2 Pendant Pipe Mount installation  
1. Determine location for pipe mount.  
2. Use the four holes in flange as template to mark drill holes in ceiling in which to position  
secure mount.  
3. Drill the four holes into ceiling.  
4. Drill fifth hole in center of four-hole pattern to mount flange.  
5. Use this hole to feed wires through mount.  
6. Assemble flange to pipe and pipe to cap.  
Note: Select pipe length of 20 cm (7.9 in.), 30 cm (11.8 in.), or 50.5 cm (20 in.).  
7. Pull wires through pipe starting at flange end.  
8. Assemble pipe mount to ceiling.  
9. Connect all wires to camera.  
10. Pull any excess wire back into mount tube.  
11. Assemble camera to mount and fix with three (3) M5 screws (supplied).  
12. Install camera dome housing cover.  
Bosch Security Systems  
Installation manual  
AM18-Q0631 | v1.0 | 2012.08  
 
Indoor Minidome Wall and Pipe Mounts  
Dimensional outlines | en  
7
4
Dimensional outlines  
The following illustrations depict the dimensional outlines for the wall and pendant pipe  
mounts.  
VDA-WMT-AIDOME  
Figure 4.1 Wall mount dimensions  
Bosch Security Systems  
Installation manual  
 
AM18-Q0631 | v1.0 | 2012.08  
Indoor Minidome Wall and Pipe Mounts  
Dimensional outlines | en  
8
VDA-PMT-AIDOME  
Figure 4.2 Pendant mount dimensions  
Bosch Security Systems  
Installation manual  
 
AM18-Q0631 | v1.0 | 2012.08  
 
Bosch Security Systems  
© Bosch Security Systems, 2012  
 

Belkin Telephone Accessories F1PG200ENAU User Manual
Bissell Vacuum Cleaner 3554 User Manual
Bolens Tiller 12207 User Manual
Bosch Power Tools Power Hammer 611240039 User Manual
Boss Audio Systems Car Stereo System BV9564BI User Manual
Bowens Camera Accessories BWL 0353 2 05 07 User Manual
Braun Blender MR 4050 CA User Manual
Braun Electric Shaver 5185 User Manual
Canon Camera Accessories 28 User Manual
Carrier Fan 38AB054 User Manual