Foreground Speakers
Models FG15 (B/W), FG20S, & FG30
Installation
1. Peel backing off of the foam rubber pads and
affix them to the inside of the mounting
bracket ears.
2. Attach bracket to mounting surface using
appropriate hardware (user-supplied).
3. Make electrical connections and power
settings and then slip the speaker between the
mounting bracket ears and line up the holes.
4. Attach the speaker to the mounting bracket
using either the threaded knobs or the screws
and washers for a more tamper-resistant
mount. Do not use the washers with the
threaded knobs.
Note: Physical appearance of speaker and
bracket may differ from this drawing.
Specifications subject to change without notice.
© 2004 Bogen Communications, Inc.
Part No. 54-2111-01A 0404
|