Operating instructions
Kiel RD 104
Contents
CD operation ................................. 26
Radio operation with RDS ........... 22
Short description.......................... 17
Inserting the disc ................................... 26
REG - Regional ..................................... 22 Ejecting the disc .................................... 26
Selecting a station................................. 23 Selecting a track /
AF - alternative frequency ..................... 22
Important information .................. 20
What you need to know! ....................... 20
Traffic safety ......................................... 20
Installation/connection .......................... 20
Automatic seek tuning........................... 23 Cueing and reviewing ........................... 26
Sampling tracks automatically with
Manual seek tuning ............................... 23
Adjusting the seek tuning sensitivity ..... 23
Stereo - mono switch (FM).................... 23
Changing the memory bank (FM) ......... 23
Storing stations ..................................... 23
Storing the strongest stations auto-
matically with Travelstore...................... 24
Recalling stored stations ....................... 24
Sampling stored stations briefly with
CD SCAN .............................................. 26
The Mix function.................................... 26
Changing the audio source with SRC ... 26
Anti-theft coding........................... 20
Wrong code number entered ................ 20
Switching the code system on .............. 21
Restart following interruption of power
supply.................................................... 21
Switching the code system off .............. 21
Optical indication of theft protection ...... 21
DSC programming........................ 27
Survey of DSC default settings ............. 28
Appendix ....................................... 28
Technical data....................................... 28
Preset Scan .......................................... 24
Sampling stations briefly with
Radio Scan ........................................... 24
Reception of traffic announcements
with RDS-EON............................... 25
Priority of traffic announcements
ON/OFF ................................................ 25
Warning beep........................................ 25
Switching the warning beep off ............. 25
Automatic seek tuning start................... 25
Adjusting the traffic message and
warning beep volume ............................ 25
16
Short description
2 VOL+ / VOL-
ry by pressing the -dB button for about
2 seconds (beep tone is released).
This volume will then be stored as the
mute volume.
1 ON
Adjust the desired volume with VOL+ /
VOL-.
Each time the set is switched on, it will
play with the pre-adjusted volume. You
may also change this setting (see chap-
ter “DSC programming - VOL FIX”).
Switching on:
Press ON, the set plays with the pre-
adjusted volume. You may also change
this setting (see chapter “DSC pro-
gramming - VOL FIX”).
When “CODE” lights up in the display,
read chapter “Anti-theft coding” first.
Switching off:
Press ON for approximately 1 second.
The set may also be turned off via the
vehicle’s ignition (provided that it was
connected correspondingly).
To operate the set when the ignition is
switched off, proceed as follows:
Press ON after the ignition was swit-
ched off. The set will be turned on.
To protect the battery, the system will
automatically shut off after a playing
time of one hour.
6 Rocker switch
Station search
3 FM
up
To select one of the FM memory banks
I, II.
down in short
intervals
up in short
intervals
4 TS (Travelstore)
To store the six most powerful stations
automatically with Travelstore:
Store: Press TS until seek tuning starts
(see display).
Recall: Press TS. Then briefly press
one of the presets 1, 2, 3, 4, 5, 6.
(when AF is off)
(when AF is off)
down
Extra functions:
Track
/
:
To select the title
(upwards/down-
wards)
5 -dB
Press the -dB button to instantly mute
the audio source. The display will then
show “MUTE”. Return to normal volume
by pressing either the -dB button once
again or the VOL+ / VOL- button.
To program the mute volume, proceed
as follows:
Volume +
CD
:
Cue/review
Switching on/off
Volume
In the DSC mode: Select function and
program parameter.
In the AF mode: (“AF” in the display)
Use <</>> to scroll
through the pro-
grams of a radio
Adjust the desired volume with the
VOL+ / VOL- button. Confirm your ent-
17
network, e.g. from
NDR1 to NDR4
(North German
broadcaster) or to
display the entire
AF memory.
: LD
Loudness - boosts bass at low volume.
Extra function:
REG ON/REG OFF - With REG ON,
the radio only switches to a better alter-
native frequency, if it offers the same
regional program (see “REG - Regio-
nal”).
Loudness on/off: Press LD.
For more information see chapter “DSC
programming”.
; PS (Preset Scan)
7 Display
Radio function:
> lo
Press PS briefly - the system will briefly
play all stations stored on the preset
buttons.
To change the seek tuning sensitivity.
“lo” lights up in the display - normal
seek tuning sensitivity (the system will
pick up all powerful, nearby stations).
“lo” does not light up - high seek tuning
sensitivity (the system will also pick up
weaker stations).
Radio operation
Station name
(NDR1 NDS)
Memory bank (FM I)
Press PS longer than 2 seconds - the
system will briefly play all FM stations
to be received.
CD function:
To sample the CD titles.
To start or stop: Press PS briefly.
CD operation
In the DSC mode you
can choose between
the CD PLAY or play-
back time indication.
To change the seek tuning sensitivity:
Press lo briefly.
Extra function:
Switching from stereo to mono: Press
lo longer than 2 seconds.
< TA (priority for traffic announcements)
When “TA” lights up in the display, the
system will only play stations offering
traffic information.
8 LED warning light (code-LED)
Flashes as additional anti-theft protec-
tion when the car radio is turned off
(see chapter “DSC programming - LED
ON”).
TA on/off: Press TA.
?
/ SRC (Source)
Press the button briefly - to select bet-
ween the audio sources, radio and CD.
Press the button longer than 1 second -
to eject the CD.
= AF (alternative frequency in RDS ope-
ration)
When “AF” lights up in the display, the
system will automatically seek a fre-
quency offering better reception of the
same RDS program.
9 MIX
Press MIX - all CD titles will then be
played at random.
AF on/off: Press AF briefly.
18
@ 1, 2, 3, 4, 5, 6 - preset buttons
You can store 6 stations on each FM
memory bank (I, II, and “T”).
C GEO
To adjust the balance (left/right) and
D AUD
To adjust the treble and bass frequen-
fader (front/rear) using the rocker
switch.
cies using the rocker switch.
To store a station: Press button during
radio operation and hold down until the
radio resumes play.
To recall a station: Select the desired
memory bank by pressing FM. Then
press the corresponding preset button.
Treble
+
Fader front
Bass
+
Bass
Extra function:
Coding: Read chapter “Anti-theft cod-
ing” first.
Balance
left
Balance
right
Buttons 1, 2, 3, 4 - To enter the four-
digit code.
Treble
Press each button repeatedly until the
four-digit code given in the car radio
passport is displayed.
Fader rear
The last setting will be automatically
stored.
If the setting remains unchanged within
8 seconds, the display will show the
previous status.
The last setting will be stored automati-
cally.
If the setting remains unchanged within
8 seconds, the display will show the
previous status.
A CD slot
Insert the CD with the label side
showing to the top. The system will
switch from radio to CD operation.
B DSC (Direct Software Control)
Use the DSC function to adapt a num-
ber of programmable basic settings to
your personal needs.
For more information, read through
chapter “DSC programming”.
19
Important information
Anti-theft coding
Do not connect the loudspeaker outputs to
ground!
Only use the accessory and replacement
parts approved by Blaupunkt.
The car radio comes standard with the code
system deactivated.
What you need to know!
Before starting to use your new car radio you
shouldcarefullyreadthroughtheinformation
on “Traffic safety” and “Anti-theft coding”.
If the anti-theft coding system is on while the
power supply to the unit is interrupted (e.g.
theft,disconnectingthecarbattery),thesetis
electronically blocked. Then it may only be
used again after the appropriate code num-
ber has been entered (see car radio pass-
port).
Traffic safety
Traffic safety has always priority. Use your
car radio in such a manner that you are
always able to cope with and react to the
prevailing traffic situation at any given time.
Remember, even at 50 km/h you are still
moving at a speed of 14 m per seconds.
It is also very important that you are able to
hear, and react to, acoustic warning signals
around you, for example from the police or
the firebrigade.
Wrong code number entered
It should not be possible for thieves to ascer-
tain the code number by trial-and-error. This
is why the set will be blocked for a certain
period of time, if an incorrect code number is
entered. Inthiscase, “- - - -”willappearinthe
display.
This waiting time is 10 seconds after the first
three attempts, and 1 hour following subse-
quent attempts.
Therefore, adjust the volume reasonably.
Installation/connection
After 19 unsuccessful attempts, “OFF” will
appear in the display and the set can no
longer be restarted.
The code system can only be switched on
and off, if the radio is connected to perma-
nent power.
If you like to install your new car radio by
yourself or add other audio components to
the existing ones, then please read carefully
the enclosed instructions on installation and
connection.
Note:
Keep you car radio passport with the code
number in a safe place in order to avoid
“unauthorized access” to your car radio.
20
If the power supply to the radio is interrupted
while the code system is switched on, you
need to know the right code number.
The radio will operate again as soon as you
have entered the right code number.
If you lose your radio passport and have
forgotten your code number, you will not be
able to restart the set after the power supply
has been interrupted. In this case, your radio
can only be reset in our central customer
service workshop or in one of our service
agencies abroad.
If the radio is turned off before the waiting
period has elapsed, then the waiting period
restarts as soon as the radio is turned on
again.
Restart following interruption of
power supply
(Code system switched on)
•
•
•
Switch on the set.
“CODE” will appear in the display.
Switching the code system off
Briefly press preset button 1, “0000” will
appear in the display.
•
•
Turn off the radio.
Simultaneously press preset buttons 1
and 4 and hold them down.
Enter the code number given in the
Blaupunkt car radio passport:
•
•
Turn the set on.
“CODE” will appear in the display.
Example: the code number is 2521.
- Press preset button 1 twice, “2000”
appears in the display.
- Press preset button 2 five times,
“2500” appears in the display.
- Press preset button 3 twice, “2520”
appears in the display.
Enter the code number given in the
Blaupunkt car radio passport and con-
firm: See example “Restart following
interruption …”.
Switching the code system on
Precondition:
The radio must be connected to permanent
power.
The code system is now deactivated.
- Press preset button 4 once, “2521”
appears in the display.
In order to switch the code system on:
•
•
Turn the radio off.
Optical indication of theft protec-
tion
•
To confirm the code number:
Press the upper part of the rocker
Hold down the preset buttons 1 and 4
simultaneously.
switch
.
When the car is parked, you can let the LED
warning light flash in order to show that the
set is theft-protected.
DSC allows you to adjust two different set-
tings: LED ON or LED OFF.
•
Turn the radio on.
“CODE” briefly appears before the ra-
dio begins to operate.
Your car radio is now ready for operation.
If four dashes appear again in the display,
you have entered a wrong code number.
Now it is essential to enter the correct code
after the waiting period has elapsed (CODE
in the display).
•
Release preset buttons 1 and 4.
The code system is on.
“CODE” will be briefly displayed each time
the radio is turned on.
For more information, please read through
chapter “DSC programming - LED ON”.
21
Radio operation with RDS (Radio Data System)
To make radio reception even more conven-
REG - Regional
AF - alternative frequency
ient, an ever increasing number of FM radio
The AF function can also be used to activate
and deactivate the regional function.
At some times of the day, larger radio stati-
ons split up their main program into regional
program versions offering local information.
If you want the radio to lock onto a regional
program,
The AF function makes sure that the stron-
stations broadcast additional information in
gest frequency of the selected program is
parallel with their normal program via the
always tuned in automatically.
Radio Data System.
This function is activated if “AF” lights up in
the display. You can then use the << / >>
rocker switch to scroll through the programs
Assoonasaradioprogramcanbeidentified,
thestationnameandpossiblyalsoaregional
identifier will appear in the display, e.g.
of a radio network, e.g. from NDR1 to NDR4
“NDR1 NDS” (local radio program in Lower
Saxony, Germany).
With RDS, the preset buttons turn into pro-
gram buttons. Now you know exactly to
(NorthGermanbroadcaster)ortodisplaythe
entire AF memory.
To switch AF on/off:
•
hold down the AF button for about 2
seconds.
The display will show “REG ON”.
•
Press AF briefly.
absolutely easy to find the desired station During seek tuning for the frequency offering
quickly. the best reception of the selected program,
But RDS even offers you more advantages: the radio is muted for a moment.
If “SEARCH” appears in the display when
If you leave the service area of the regional
station tuned in, or if you wish to use the
entire RDS service again, switch to “REG
OFF”.
which program your set is tuned in, making it
•
Hold down the AF button for about 2
turning on the set or when calling up one of
the stored frequencies, the set is automati-
cally searching for an alternative frequency.
“SEARCH” goes out as soon as the system
has found an alternative frequency or after
the frequency band has been scanned com-
pletely.
seconds until “REG OFF” is displayed.
If “REG ON” is activated, the display will
show “REG ON” each time the radio is swit-
ched on.
Should the reception quality of the selected
program become too bad,
•
tune into another program.
22
Adjusting the seek tuning sensi- Changing the memory bank (FM)
Selecting a station
tivity
This set allows you to receive FM stations
between 87.5 and 108 MHz.
You can shift between the memory banks I
and II to store and recall preset stations.
Theselectedmemorybankisindicatedinthe
display.
The set allows you to modify the seek tuning
sensitivity.
For this:
Automatic seek tuning
Press . The radio will automatically
tune into the following station.
If you keep the upper or lower part of the
rocker switch depressed, seek tuning
/
•
Press FM until the desired memory
bank lights up in the display
•
Press lo briefly.
•
/
If “lo” is indicated, the radio will only pick up
strong stations (low sensitivity).
(press repeatedly if necessary).
If “lo” is not indicated, the radio will also pick
up less powerful stations (higher sensitivity).
The degree of sensitivity can be separately
adjusted for both levels (see chapter “DSC
programming”).
/
speeds up in upwards or downwards direc-
tion.
Storing stations
Using the preset buttons 1, 2, 3, 4, 5, 6 you
can store six stations on each FM memory
bank (I, II, T).
up
•
Select FM or TS and with FM also the
desired memory bank.
Stereo - mono switch (FM)
down in short
intervals
(when AF is off)
up in short
intervals
(when AF is off)
You can switch to mono when the reception
quality becomes poor:
•
Use the rocker switch to tune to a stati-
on (either automatically
/
or ma-
•
Press lo for approximately 2 seconds.
nually << / >> ).
During mono reception the stereo sym-
•
Press the desired preset button and
hold it down. The radio will be muted
and resumes play after approximately 2
seconds. The system will also send out
a beep tone.
down
bol
in the display will go out.
Each time the car radio is switched on, the
radio will be automatically set to stereo
reception.
It will automatically switch to mono when the
reception quality becomes poor.
Manual seek tuning << / >>
(prerequisite: AF is switched off!)
•
Press << or >> to change the frequency
in small steps in upwards/downwards
direction.
Now the station is stored.
The activated preset button is indicated in
the display.
Hold down the right or left part of the rocker
switch to speed up this procedure.
23
To continue listening to a sampled sta-
tion/switch Radio Scan off:
Sampling stored stations briefly
with Preset Scan
Storing the strongest stations
automatically with Travelstore
•
Briefly press PS.
Use the Preset Scan function to briefly sam-
ple all stations stored under FM or TS.
You can use the Travelstore memory bank to
automatically store the six strongest FM sta-
tions sorted on the preset buttons according
to their signal strength. This feature is espe-
cially useful when travelling, because it will
alwaysgiveyouthemostpowerfulstationsat
a fingertip as you pass through the various
reception areas.
If no station is selected during the search
operation, the scan function will be automa-
tically switched off after the entire frequency
band has been passed through. The radio
will then return to the initial station that was
being played when the scan function was
activated.
•
•
Press FM or TS.
Press PS,
the set will then sample all the stored
stations, with FM on all memory banks.
Free preset buttons will be skipped.
To switch off Preset Scan:
For more information, please also refer to
chapter “DSC programming - SCANTIME”.
•
Press TS for at least 2 seconds.
•
Press PS once again.
The radio will seek the most powerful FM
stations and store them on the “T” memory
bank (Travelstore). As soon as this procedu-
rehasfinished, thefirststationwillbeplayed.
FM stations can also be stored manually on
the Travelstore memory bank (see “Storing
stations”).
The system will continue to play the
currently sampled station.
Sampling stations briefly with
Radio Scan
Startingwiththecurrentlyplayedstation, you
mayletthesystemsamplethefollowingones
one after another.
Recalling stored stations
To activate Scan:
You can recall any stored station by pressing
the corresponding preset button.
•
Press PS for about 2 seconds.
The sampled frequency or the station
name starts flashing in the display.
During the actual search process,
“SCAN” is flashing.
•
Select FM or TS and with FM also the
desired memory bank.
For this purpose, press FM until the
desired memory bank is indicated on
the display.
•
Briefly press the corresponding preset
button.
24
Reception of traffic announcements with RDS-EON (Enhanced Other Networks)
Many FM broadcasters provide their service
area with traffic messages at regular inter-
vals.
All traffic program stations transmit a special
telegram signal in addition to the radio pro-
gram, which is recognised and decoded by
the car radio. As soon as such a signal is
received, the display shows “TP” (Traffic
Program).
Other radio stations do not air traffic an-
nouncements by themselves, but offer the
possibility to receive the traffic announce-
ments of another station within the same
radio network. In this case, “TP” will light up
in the display as soon as the priority for traffic
announcements is activated. The display
must then show “TA”.
If a traffic announcement comes in, your
radio will automatically switch to the traffic
program for the duration of the message and
return to the previous station after the end of
the message.
Alternative:
Priority of traffic announcements
ON/OFF
b) Switch the priority of traffic announce-
ments off:
If the priority of traffic announcements is
activated, “TA” lights up in the display. To
switch the function on/off:
•
Press TA.
In the display, the “TA” indication goes out.
•
Press the TA button.
Automatic seek tuning start
(CD operation)
When pressing TA while a traffic announce-
ment is being played, the radio stops playing
the message and switches to the previous
mode. The priority for all subsequent an-
nouncements remains active.
If you leave the reception area of your traffic
program while you are listening to a CD, the
car radio will automatically tune into another
traffic program station.
If no such traffic program station is found
within approximately 30 seconds, CD repro-
duction will be interrupted and you will hear a
warning beep. To switch off the warning
beep, proceed as detailed above.
Warning beep
Whenever you leave the reception area of
the traffic program station you have tuned
into,youwillhearawarningbeepafterappro-
ximately 30 seconds.
Thiswarningbeepwillalsobereleasedwhen
pressing a preset button without traffic Adjusting the traffic message
program.
and warning beep volume
The traffic message and warning beep volu-
me is adjusted at the factory. However, you
can change this default setting using the
Switching the warning beep off
a) Tune to another traffic program station:
•
•
Press the rocker switch 6, or
DSC function (see “DSC programming - TA
LEVEL”).
press a preset button with a station
offering traffic information.
25
CD operation
The rocker switch is designed as a sequence
switch, i.e. several tracks can be skipped at
a time by pressing it repeatedly. The display
shows “T” (track) and the corresponding
number of the currently selected track.
Inserting the disc
The Mix function
When the Mix function is activated, the CD
tracks will be played at random. The display
will then show “MIX”. To skip a title, press
•
•
Switch on the set.
Insert the CD (label side facing up) wi-
thout applying force.
rocker switch
To switch Mix function on and off:
Press the MIX button.
.
Thediscisautomaticallypulledintothesetto
reach the playing position. CD reproduction
starts.
Cue (Fast forward):
•
•
Keep depressed the rocker switch >>.
Review (Fast backward):
Keep depressed the rocker switch <<.
Changing the audio source with
SRC
•
Ejecting the disc
•
Press the
/ SRC button for more
Sampling tracks automatically
with CD SCAN
When you have inserted a CD, you can
change between CD or radio reproduction.
To switch over,
than 1 second. The CD is ejected.
To protect the CD mechanism, the automatic
insertion and ejection of the disc must not be
impaired in any way.
This function allows you to sample all CD
tracks one after another.
•
press the
/ SRC button.
To activate the scan function,
Selecting a track
•
press the PS button for about
2 seconds.
The display shows “CD SCAN”.
The following tracks will be scanned
one after another.
As soon as the disc is inserted, the activated
CD functions will be shown in the display.
Use the or rocker switch to select the
desired title.
To continue listening to the sampled track,
•
•
Press rocker switch to skip titles.
Press rocker switch to repeat titles.
•
press the PS button once again.
The set will then continue to play the
track currently being sampled.
If the rocker switch is only pressed once,
thesystemwillgobacktothebeginningofthe
currently played title and repeat it, provided
that this track has at least been played for 5
seconds.
For more information, please also refer to
chapter “DSC programming - SCANTIME”.
26
DSC programming
This car radio offers direct software control
(DSC) to adapt a number of default settings
to your personal needs and to store them.
In the following you will find an overview of all
the default settings adjusted at the factory.
To change a programmed parameter,
BEEP
Achnowledgement tone for
all functions where the re-
spective button has to be
held down for more than 2
seconds to activate the func-
tion.
LOUDNESS When listening at a low level,
the loudness function will
create a more natural sound
by emphasizing the low fre-
quency range.
LOUD 1 - no boost/off
Adjust volume between
0 and 9 (0 = OFF).
LOUD 6 - strong boost
•
press DSC.
Then use the rocker switch to select and
change the functions described below.
The display shows the the adjusted condi-
tion.
SCANTIME Use this function to specify
the scan time (in the CD and
BRIGHT
The display brightness can
be adjusted between 1 and
15. You may set one day
and one night adjustment.
Brightness of night illumina-
tion:
Switch on the vehicle’s light-
ing system and program the
brightness value. For this,
the illumination connector
has to be hooked up to the
electric system of the car.
radio mode). Choose a value
between 5 and 30 seconds.
Select function
S-DX 1
S-LO 1
SPEECH
Use this function to adjust
the seek tuning sensitivity for
distant reception.
DX. 1 - high sensitivity
DX. 3 - low sensitivity
Change-
setting
Change-
setting
Use this function to adjust
the seek tuning sensitivity for
local reception.
LO. 1 - high sensitivity
LO. 3 - low sensitivity
Select function
COLOUR
CD DISP
COLOUR green << >> red
Use this function to display
CD PLAY or TIME.
Use this function for individu-
al adjustment of the sound
parameters, e.g. for speech
programs.
LED ON
You can select between LED
ON and LED OFF.
SPEECH 0 - max. treble
SPEECH 4 - min. treble
27
Appendix
TA LEVEL Use this function to adjust
the volume of traffic announ-
cements between 1 and 9.
The announcement will be
played with the specified
volume.
Technical data
Amplifier
Output power:
4 x 20 W RMS according
to DIN 45324
4 x 25 W music accord-
ing to DIN 45324
VOL FIX
Use this function to adjust
the initial volume when the
set is switched on.
FM
Sensitivity:
0.9 µV at 26 dB S/N ratio
Frequency
response:
30 - 16,000 Hz (-3 dB)
To quit the DSC mode and store the setting:
Press DSC.
•
CD
Frequency
response:
20 - 20,000 Hz (-1 dB)
Survey of DSC default settings
BEEP
4
BRIGHT
COLOUR
CD DISP
LED
LOUDNESS
SCANTIME
S-DX
15
RED
TIME
ON
3
10s
2
S-LO
2
SPEECH
TA LEVEL
VOL FIX
0
5
20
Subject to modifications!
28
Blaupunkt-Werke GmbH
Bosch Gruppe
7/94
K7/VKD 3 D94 162 004
PM
|