|
SM514-KRSlim-Grip™UniversalPhoneandSmartphoneHolderwithMiniWindshield Suction and Dashboard Mount
Package Contents:
GN014-SBH
(1) SM050-2 - Slim-Grip™ Universal phone and smartphone holder
(1) GN014-SBH - Mini Windshield Suction and Dashboard Mount
Mini Windshield
Suction Pedestal
Holder included is Universal, designed to fit nearly ALL non-flip mobile
phones regardless of whether a protective case or silicone sleeve is attached
to the phone.
82 mm
expandable to
118.5 mm
•
Most smartphones, mobile phones, and
cell phones having heights between
80mm and 115mm tall
•
•
•
•
•
•
•
Palm - All non-flip models
LG Mobile Phones - All non-flip models
Samsung - All non-flip models
Sony Ericsson - All non-flip models
Sanyo - All non-flip models
•
•
•
•
•
Apple iPhone - All models
RIM BlackBerry - All non-flip models
HTC Phones - All non-flip models
Motorola Phones - All non-flip models
Nokia Mobile Phones - All non-flip models
Pantech - All non-flip models
Google - All non-flip models
SM050-2
Slim-Grip™
Universal Phone Holder
All brand names and product names are trademarks or registered trademarks of their respective owners.
Windshield Mounting
Connecting the Slim-Grip™ Holder to Dual T-Tab Pedestal
Connect the dual T-slots (A) on holder to the dual T-tabs (B) on
the pedestal head.
Step 1.
Find a safe location on the interior of the vehicle’s windshield
to mount the pedestal. Firmly push the suction base (A)
against the windshield and flip the base lever down (B) to the
locked position. See diagram below.
Step 1.
B
A
Optional Cord
Catcher
B
A
Install the Support Legs to the Holder
Insert Phone into Holder
Secure holder with your hand for support, as spring-loaded
Insert the holder support legs (A) by sliding them into the
support leg grooves (B) on the top and bottom of the holder.
Step 1.
Step 1.
mechanism requires significant force to operate. Hold your phone
and insert into universal holder by pushing down on the bottom
spring-loaded support legs with moderate amount of pressure
(C). Slide the top of the device under the top support legs (D) until
it fits snuggly in the holder.
B
A
A
D
A
B
A
C
Continued on other side...
Consumer Hotline:
USA (800) 841-0884
INT’L (626) 254-9005
Safety Precautions
ꢀ
࣬ ꢁꢂ৹ߔࢄ ੦ !
Do not install Arkon products over an air bag cover or within the air
bag deployment zone. Arkon Resources, Inc. assumes no responsi-
bility of liability for injury or death as a result of car crashes and/or
air bag deployment.
Representative in KOREA
TEL : 02) 839-5701
Monday - Friday 9am-5pm, PST
FAX : 02) 830-5703
Arkon is not responsible for any damages caused to your car, your
device, or yourself due to the installation or use of this pedestal mount.
Arcadia, CA 91006 USA
Designed in USA | Made in China And Taiwan
© Copyright 2010 Arkon Resources, Inc.
|
SM514-KR Slim-Grip™ Universal Phone and Smartphone Holder with Mini Windshield Suction and Dashboard Mount
Adjusting Holder to Fit Phone
E
E
If necessary, adjust the support legs (E) on top and bottom by
sliding them laterally to avoid any buttons or ports that may be
on your phone.
Step 1.
Consumer Hotline:
Safety Precautions
ꢀ
࣬ ꢁꢂ৹ߔࢄ ੦ !
USA (800) 841-0884
INT’L (626) 254-9005
Monday - Friday 9am-5pm, PST
Do not install Arkon products over an air bag cover or within the air
bag deployment zone. Arkon Resources, Inc. assumes no responsi-
bility of liability for injury or death as a result of car crashes and/or
air bag deployment.
Representative in KOREA
TEL : 02) 839-5701
FAX : 02) 830-5703
Arkon is not responsible for any damages caused to your car, your
device, or yourself due to the installation or use of this pedestal mount.
Arcadia, CA 91006 USA
Designed in USA | Made in China And Taiwan
© Copyright 2010 Arkon Resources, Inc.
|