USB Anywhere
EN
Manufacturer’s
Lifetime
Warranty
F5U203uk
User Guide
P74859uk-A_F5U203uk.indd
1
24/8/05 9:39:01 am
Operating Environment
Package Includes
Copying all data files from the source device: Full Mode
1. To copy ALL files from the source device to the target device, move the Full/Root switch in
the “Full” position.
-
-
-
-
Operating Temperature: 5-45oC
Shipping and Storage Temperature: -40 -65oC
Operating Humidity: 30% - 85%
Altitude: 0 to 7000 feet
-
-
-
USB Anywhere
Power Supply (DC 5V/1.5A-2.6A)
User manual
2. Connect your source device. The source LED will pulse with a green light until the device
is recognized. Once the device is recognised, the LED will then light up with a solid green
light. If the source LED turns red, the attached device is not a suitable source device.
3. Before connecting your target device, make sure the target device has sufficient unused
memory space for the files you are about to transfer. It is possible for the source device
to have a higher storage capacity than the target device. However, the files that are to be
transferred must not exceed the unused memory space on the target device.
Getting Started
1. Install three AAA alkaline or rechargeable batteries (batteries not included) or plug in the AC
power adapter. Please note: Some MP3 players will require additional power in which case
the AC power adapter has to be plugged in.
4. Connect your target device. The target LED will pulse with a green light until the device is
recognized. Once the device is recognised, the LED will then light up with a solid green
light. If the target LED turns red, the attached device is not a suitable target device or does
not have enough memory space available for the files you are about to transfer.
2. Press the Power button to turn the USB Anywhere on.
5. Press the Copy button to transfer data from the source device to the target device.
The source and target LED will start pulsing for the duration of the data transfer.
6. Once the data transfer is complete, the source and target LED will stop pulsing and the LED
in the shape of a checkmark (✓) will light up green.
P74859uk-A_F5U203uk.indd 4-5
24/8/05 9:39:03 am
5. Press the Copy button to transfer data from the source device to the target device. The
source and target LED will start pulsing for the duration of the data transfer.
Copying files in the root directory: Root Mode
Root directory: the top directory in a file system. The root directory is provided by the
operating system and has a special name. For example, in DOS systems the root directory is
called \.
6. Once the data transfer is complete, the source and target LED will stop pulsing and the LED
in the shape of a checkmark (✓) will light up green.
1. To copy only the file(s) in the root directory from the source device to the target device,
move the Full/Root switch on the USB Anywhere into the “Root” position.
Data transmission errors
If the LED in the shape of a checkmark (✓) turns red during copying, this means that a data
transmission error has occurred. The copy was not successful. To continue, please carry out
the following:
2. Connect your source device. The source LED will pulse with a green light until the device is
recognized. Once the device is recognised, the LED will then show a solid green light. If the
source LED turns red, the attached device is not a suitable source device.
3.Before connecting your target device, make sure the target device has sufficient unused
memory space for the files you are about to transfer. It is possible for the source device
to have a higher storage capacity than the target device. However, the files that are to be
transferred must not exceed the unused memory space on the target device.
1. Press the reset button.
2. Check if the target device has sufficient unused memory space to hold the files you wish
to transfer.
3. Repeat the instruction for copying files as described previously.
4. Connect your target device. The target LED will pulse with a green light until the device is
recognized. Once the device is recognised, the LED will then light up with a solid green
light. If the target LED turns red, the attached device is not a suitable target device or does
not have enough memory space available for the files you are about to transfer.
P74859uk-A_F5U203uk.indd 6-7
24/8/05 9:39:04 am
Low battery indicator
Data files on the target device
The LED in the shape of a battery indicates the power status of your batteries. When the
LED lights up, this means that the batteries have sufficient power for operation of the USB
Anywhere. If the LED does not light up when you switch on the USB Anywhere, or indeed
shuts off during operation, you will need to replace the batteries with a new set. The included
power supply can also be used as an alternative to batteries.
Transferring data from the source device to the target device does not overwrite any existing
data on the target device. With each new transfer operation, a new folder will be created which
will hold the newly transferred data.
Transfer of hidden or secured files
The USB Anywhere will not copy any hidden or secured data from the source device to the
target device. Such protected data can include MP3 files.
Automatic power shutdown function
The USB Anywhere will shut down automatically after 30 seconds if it is not in use or after
a device is unplugged. If you choose not to use batteries, the USB Anywhere will shut down
once it is unplugged from the power supply.
Belkin lifetime product warranty
For the life of the product, Belkin warrants that this device shall be free of defects in design,
assembly, material and workmanship (free replacement).
End file transfer
If you wish to interrupt the data transfer process, simply press the Reset button on the USB
Anywhere. The USB Anywhere will stop the transfer and will return to starting position. Any
files that were already transferred prior to the interruption will remain on the target device.
P74859uk-A_F5U203uk.indd 8-9
24/8/05 9:39:04 am
P74859uk-A_F5U203uk.indd 10-11
24/8/05 9:39:04 am
USB Anywhere
Belkin Ltd.
Belkin GmbH
Hanebergstrasse 2
80637 Munich, Germany
+49 (0) 89 143405 0
+49 (0) 89 143405 100 fax
Express Business Park
Shipton Way, Rushden
NN10 6GL, United Kingdom
+44 (0) 1933 35 2000
+44 (0) 1933 31 2000 fax
Belkin SAS
130 rue de Silly
Belkin B.V.
Boeing Avenue 333
92100 Boulogne Billancourt
France
+33 (0) 1 41 03 14 40
+33 (0) 1 41 31 01 72 fax
1119 PH Schiphol-Rijk, The Netherlands
+31 (0) 20 654 7300
+31 (0) 20 654 7349 fax
Belkin Tech Support
Europe: 00 800 223 55 460
© 2005 Belkin Corporation. All rights reserved. All trade names
are registered trademarks of respective manufacturers listed.
P74859uk-A
P74859uk-A_F5U203uk.indd 12
24/8/05 9:39:05 am
|