6 Port Unmanaged Gigabit Ethernet Switch
with 4 PoE+ Ports - 30W per port
IES61002POE
*actual product may vary from photos
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Manual Revision: 11/13/2013
Table of Contents
Product Diagram ....................................................................................1
Introduction............................................................................................2
Packaging Contents ................................................................................................................................. 2
System Requirements.............................................................................................................................. 2
Terminal Block Power Connector.........................................................3
DIP Switch Configuration......................................................................3
LED Indicators.........................................................................................4
Installation ..............................................................................................4
DIN Rail / Wall Bracket Installation...................................................................................................... 4
Specifications..........................................................................................5
Technical Support ..................................................................................6
Warranty Information............................................................................6
Instruction Manual
i
Product Diagram
Terminal
Block
Shielded RJ45
LAN Ports
with PoE
Shielded RJ45
LAN Ports
DIP Switch
Instruction Manual
1
Introduction
Packaging Contents
•
•
•
•
•
1 x 6 Port Gigabit Switch
1 x Terminal Block
1 x Wall Mount Bracket w/ Screws
1 x DIN Rail Bracket w/ Screws
1 x Instruction Manual
System Requirements
•
•
•
RJ45 terminated Cat5 or higher Ethernet cabling
10/100/1000 Mbps compatible Ethernet network
20-57 VDC Power Supply
Instruction Manual
2
Terminal Block Power Connector
Power can be provided through the dual inputs from separate sources, if needed. One
electrical relay can be wired into an alarm circuit. The relay is connected as Normally
Closed (will open upon alarm condition).
DIP Switch Configuration
1. Alarm Enable: When ‘On’this switch will disable alarm relay and fault LED if there is
a power failure in one supply. If only connecting to a single power source, place this
switch ‘On’to disable alarm.
2. BSP: When ‘On’this switch will disable the broadcast storm protection feature which
is enabled by default.
Instruction Manual
3
LED Indicators
PWR1: This green LED will light if power is connected and active at the PWR1 terminal
connection.
PWR2: This green LED will light if power is connected and active at the PWR2 terminal
connection.
Fault: This amber LED will light if one of the power inputs has fault condition and as
long as DIP sw#1 is OFF.
100/1000: This dual color LED will light with amber color when the LAN connected
speed is 1000M, it will light with green color when the LAN speed is 100M and will
remain off if the connected speed is 10M.
LINK/ACT: This green LED will light when the LAN port has a link and will flash when
there is Ethernet traffic.
PoE: These green LEDs will light when the LAN has successfully negotiated PoE and is
supplying output power to the remote connected PD device.
Installation
DIN Rail / Wall Bracket Installation
If you are mounting the IES61002POE product onto either a DIN Rail or to a wall, you
will first need to attach the appropriate bracket(s) to the device as shown below.
Instruction Manual
4
Specifications
Number of Ports
6 (4 PoE)
IEEE 802.3at, 802.3af, 802.3, 802.3u, 802.3ab,
802.3z, 802.3x
Supported Standards
6 x RJ45 Female (Shielded)
1 x 6-wire Terminal Block
Connectors
LED Indicator(s)
Maximum Data Transfer Rate
Compatible Networks
Auto MDIX
PWR1, PWR2, Fault, 100/1000, Link/Act, PoE
2 Gbps (Full-Duplex)
10/100/1000 Mbps
Yes
Full Duplex Support
Switching Architecture
Maximum Cable Length
Power Source
Yes
Store-and-Forward
330ft (100m)
Redundant 20 - 57VDC
2.91A@48VDC, 139.6Watts (120W for PoE)
5.95A@24VDC, 142.9Watts (120W for PoE)
Power Consumption
Enclosure Material
Operating Temperature
Storage Temperature
Humidity
Metal (IP30)
0°C to 60°C (32°F to 140°F)
-40°C to 75°C (-40°F to 167°F)
5~95% (Non-condensing)
135 x 106 x 62.5 mm
840 g
Dimensions
Weight
Instruction Manual
5
Technical Support
StarTech.com’s lifetime technical support is an integral part of our commitment to
provide industry-leading solutions. If you ever need help with your product, visit
www.startech.com/support and access our comprehensive selection of online tools,
documentation, and downloads.
For the latest drivers/software, please visit www.startech.com/downloads
Warranty Information
This product is backed by a two year warranty.
In addition, StarTech.com warrants its products against defects in materials
and workmanship for the periods noted, following the initial date of purchase.
During this period, the products may be returned for repair, or replacement with
equivalent products at our discretion. The warranty covers parts and labor costs only.
StarTech.com does not warrant its products from defects or damages arising from
misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their
officers, directors, employees or agents) for any damages (whether direct or indirect,
special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business,
or any pecuniary loss, arising out of or related to the use of the product exceed the
actual price paid for the product. Some states do not allow the exclusion or limitation
of incidental or consequential damages. If such laws apply, the limitations or exclusions
contained in this statement may not apply to you.
Instruction Manual
6
Instruction Manual
7
Instruction Manual
8
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise.
StarTech.com is your one-stop source for every connectivity part you need. From
the latest technology to legacy products — and all the parts that bridge the old and
new — we can help you find the parts that connect your solutions.
We make it easy to locate the parts, and we quickly deliver them wherever they need
to go. Just talk to one of our tech advisors or visit our website. You’ll be connected to
the products you need in no time.
to access exclusive resources and time-saving tools.
StarTech.com is an ISO 9001 Registered manufacturer of connectivity and technology
parts. StarTech.com was founded in 1985 and has operations in the United States,
Canada, the United Kingdom and Taiwan servicing a worldwide market.
|