StarTechcom Switch ET91000LC2 User Manual

Instruction Manual  
Gigabit Ethernet to Multi Mode LC/SC Fiber Media Converter - 550m  
ET91000LC2 / ET91000SC2  
ET91000LC2  
Card Release  
Thumbscrew  
DE: Bedienungsanleitung - de.startech.com  
Dip Switch  
LED Indicators  
FR: Guide de l'utilisateur - fr.startech.com  
ES: Guía del usuario - es.startech.com  
IT: Guida per l'uso - it.startech.com  
NL: Gebruiksaanwijzing - nl.startech.com  
PT: Guia do usuário - pt.startech.com  
Packaging Contents  
• 1 x Fiber Media Converter  
• 1 x Universal Power Adapter  
• 3 x Power Adapter Plug (NA/ UK/ EU)  
• 1 x Instruction Manual  
RJ45 Ethernet  
connector  
LC Duplex Fiber  
connector  
*actual product may vary from photos  
ET91000SC2  
Card Release  
Thumbscrew  
Dip Switch  
LED Indicators  
System Requirements  
• 1000BASE-T compatible Ethernet network equipment  
• RJ45 terminated UTP Cat5e or better Ethernet cable  
• 1000BASE-LX/SX compatible fiber optic network equipment  
• LC or SC terminated multi mode fiber optic cable  
• Available AC electrical outlet  
RJ45 Ethernet connector  
SC Duplex Fiber  
connector  
Installation  
Rear View (ET91000LC2 / ET91000SC2)  
1. Make sure the DIP switches are set appropriately for your network  
configuration (seeDIP Switch Settings“ section for details).  
2. Connect the fiber optic network cable from a computer/switch/  
media converter to the LC/SC connector on the media converter.  
NOTE: When connecting the fiber cable, make sure to connect the Tx  
(transmit) terminal on one end, with the Rx (receive) terminal on the  
other end.  
DC Power connector  
3. Connect a UTP Ethernet cable, from a computer/switch to the  
RJ45 jack on the media converter.  
4. Connect the power adapter to the media converter.  
5. The following example illustrates the connection scheme when  
connecting from a 1000BASE-T Ethernet port of a hub/switch to  
a 1000BASE-SX/LX port of another hub/switch, through the fiber  
media converter:  
Ground point (optional)  
6. The following example illustrates the connection scheme when  
connecting from a 1000BASE-T Ethernet port on a hub/switch to a  
1000BASE-T Ethernet Network Interface Card (NIC) in a computer  
through the fiber media converter:  
Manual Revision: 01/20/2012  
 

Sharp Projector XG MB65X User Manual
Sony Cassette Player TC FX45 User Manual
Sony Flat Panel Television 4 146 428 511 User Manual
Sony Headphones MDR IF630RK User Manual
Sony Personal Computer PCV RX463DS User Manual
Sony Trimmer PCS G70 User Manual
Sony Universal Remote 130 User Manual
Sunbeam Bread Maker Bread Dough Maker User Manual
Sunbeam Mixer JM3250 User Manual
Tally Genicom Printer T8006e User Manual