Instruction Manual
12U 36in Knock-Down Server Rack Cabinet with Casters
RK1236BKF
DE: Bedienungsanleitung - de.startech.com
WARNING! To prevent bodily injury, please ensure that the rack
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
is installed in a structurally sound environment with a level floor
and that all hardware has been assembled securely, and checked for
stability before loading equipment. When installing equipment into
the rack, start from the bottom of the rack first and move upwards,
keeping the heaviest equipment at the bottom to avoid a situation
where the rack becomes top-heavy.
Packaging Contents
• 1 x Top Panel
Required Tools
• 3 x Bottom Panel
• 4 x Cross Brace
• 2 x Side Panel and frame
• 8 x Plastic Corner Caps
• 4 x Adjustable Feet
• Phillips (crosshead) screwdriver
• Adjustable wrench
Side Panel Lock
• 4 x Casters
• 2 x Allen Wrench (small, large)
• 1 x Assembly screw kit (M4, M5, M6, M8)
• 1 x Bag of M6 Cabinet Screws and Nuts
• 2 x Sets of keys
Installation
Frame Assembly
1.Connect the two side frames (with side doors) together using the
4 cross braces at each corner. Fasten using a large silver hex screw
(M8) at each end of the brace with the large Allen Wrench. Ensure
that the“fin”on the cross brace faces inwards. Attach the cross
braces to one side first, then attach the second side frame to the
braces.
NOTE: Make sure that the two side frames are right side up. Check
that the lock and latches on the side doors are on the same end as
well as the markings on the inner rack posts.
WARNING: Before proceeding, ensure that ALL hex screws are
tightly wrench-torqued to prevent accidental loosening during use.
Corner Joints
Large Hex Screw
Cross Brace
Cross Brace
*installation photos for reference only
Manual Revision: 06/21/2012
WARNING: Before attempting to use the cabinet, ensure that all
screws (inside and outside the cabinet) are tightly torqued to prevent
accidental loosening during use.
Specifications
12U 36in Knock-Down Server Rack
Cabinet with Casters
Description
Material
Color
Steel/Aluminum
Black
Maximum Weight
Capacity
800kg
12U
Internal Height
Maximum Mounting
Depth
750.0mm
Mounting Width
19 inches
Square
Mounting Hole Type
External Dimensions
(HxWxD)
663.0mm x 600.0mm x 900.0mm
29.3kg
Net Weight
Standards
EIA RS-310D, IEC297-2,
DIN41491 (Part 1)
*actual product may vary from photos
Certifications
RoHS, WEEE
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s)
to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all
trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.
Technical Support
StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access
our comprehensive selection of online tools, documentation, and downloads.
Warranty Information
This product is backed by a lifetime warranty.
In addition, StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned
for repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising from
misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental,
consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow
the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.
|