StarTechcom Computer Drive 35fcreadbk2 User Manual

Instruction Manual  
3.5in Front Bay USB 2.0 22-in-1 Memory Card Reader  
35FCREADBK2  
DE: Bedienungsanleitung - de.startech.com  
FR: Guide de l'utilisateur - fr.startech.com  
ES: Guía del usuario - es.startech.com  
IT: Guida per l'uso - it.startech.com  
NL: Gebruiksaanwijzing - nl.startech.com  
PT: Guia do usuário - pt.startech.com  
Packaging Contents  
• 1 x Internal Card Reader  
• 1 x 9-pin IDC cable  
• 1 x Bag of mounting screws  
• 1 x Installation Guide  
*actual product may vary from photos  
System Requirements  
• Computer chassis with available 3.5in front bay  
Installation  
WARNING! Computer parts can be severely damaged by static  
electricity. Be sure that you are properly grounded before opening  
your computer case. StarTech.com recommends that you wear an  
anti-static strap when installing any computer component. If an anti-  
static strap is unavailable, discharge yourself of any static electricity  
build-up by touching a large grounded metal surface (such as the  
computer case) for several seconds.  
• Computer system with available internal 9-pin USB header  
• Windows 2000/ XP(32/64-bit)/ Server 2003 (32/64-bit)/ Vista (32/64-  
bit)/ 7 / 8 (32/64-bit)/ Server 2008 R2, Linux kernel 2.4 or later  
1. Turn your computer off and any peripherals connected to the  
computer (i.e. Printers, external hard drives, etc.). Unplug the  
power cable from the rear of the power supply on the back of the  
computer and disconnect all peripheral devices.  
2. Remove the cover from the computer case. Refer to  
documentation for your computer system for details.  
3. Remove the cover for a front panel 3.5in bay. Refer to  
documentation for your computer system for details.  
4. Slide the internal card reader into the 3.5in bay from the outside.  
Once the mounting holes along the sides of the card reader line  
up with the mounting holes for the 3.5in bay, fasten the card  
reader in place. Refer to documentation for your computer system  
for details.  
5. Connect the USB cable from the rear of the card reader to an  
available 9-pin USB header on the motherboard. The connector  
is keyed to help prevent incorrect installation. See system or  
motherboard documentation for specific details.  
6. Place the cover back onto the computer case.  
7. Insert the power cable into the socket on the power supply and  
reconnect all other connectors removed in Step 1.  
8. No driver installation is required, as the operating system should  
detect and install it automatically. Once installed, memory cards  
may be inserted into the reader and used (only one card at a  
time supported).  
Card Slot 1  
Card Slot 2  
Card Slot 3  
Micro SD/SDHC/SDXC  
Memory Stick Micro (M2™)  
xD-Picture card™  
SD/SDHC/SDXC/SM, MMC/RS-MMC/  
HS-MMC/MMCmobile/MMCplus/  
MMCmicro/HC-MMC  
Card Slot 4  
Card Slot 5  
Card Slot 6  
CompactFlash™ type I/II  
MemoryStick™ (MS/MS Duo/HS-MS/  
MS PRO/MS PRO Duo/MS PRO-HG Duo/  
MS-ROM)  
Manual Revision: 08/07/2012  
 

Singer Sewing Machine MA75T User Manual
Sonance Car Amplifier 875D SE User Manual
Sony Cell Phone 1265 7445 User Manual
Sony Computer Hardware MSM8TQ User Manual
Sony Ericsson Cell Phone Z320 User Manual
Sony Speaker System 4431775122 User Manual
Sony Speaker System RDPXF300IPN User Manual
Spalding Fitness Equipment M5800142 User Manual
SUPER MICRO Computer Network Card 5010E User Manual
Targus Laser Pointer N2953 User Manual