REQUIRED TOOLS
AND MATERIALS:
Sports Table
Owner’s Manual
Customer Service Center
• Two (2) capable
adults
• N53 W24700 South Corporate Circle • Sussex, WI 53089 • U.S.A.
Adult Assembly Required.
This manual, accompanied by sales receipt, should be saved and kept on hand as a
convenient reference, as it contains important information about your model.
• Hammer
• Safety Glasses
• (2 each) Wrenches and/or
Socket Wrenches and
Sockets (Deep-Well
Sockets are
Recommended).
• Extension is Recommended.
7/16" 1/2" 9/16" 3/4"
AND/OR
7/16" 1/2" 9/16" 3/4"
WARNING!
Write Model Number
From Box Here:
READ AND UNDERSTAND
OPTIONAL TOOLS
AND MATERIALS:
OPERATOR'S MANUAL
BEFORE USING THIS UNIT.
FAILURE TO FOLLOW
OPERATING INSTRUCTIONS
COULD RESULT IN INJURY
OR DAMAGE TO
• Large and Small
Adjustable Wrenches
PROPERTY.
Toll-Free Customer Service Number for U.S: 1-800-558-5234,
For Canada: 1-800-284-8339,
For Europe: 00 800 555 85234 (Sweden: 009 555 85234),
For Australia: 1-800-632 7921
Internet Address: http://www.huffysports.com
1
08/06
ID# M300011
© COPYRIGHT 2005 by SPALDING
HARDWARE IDENTIFIER
(NUTS AND WASHERS)
Get to know the basic parts
of your system...
2
12
12
12
12
11
12
12
1
7
#7 (2)
#8 (1)
3
6
9
#11 (1)
#10 (4)
4
5
5
5
7
8
5
10
10
3
08/06
ID# M300011
Screw glider feet (5) into the bottom surface
of the table base (4) as shown.
Install net (3)
as shown.
1.
4.
1
10
5
4
3
Place the rod (6) through the table base (4)
2.
and
install flat washer (7) and jam nut (8)
as shown.
OUTSIDE VIEW
6
A.
B.
C.
D.
4
7
8
Position pole (9) over the rod (6) and into
the recessed location on the base (4) as
shown.
3.
6
1
9
4
3
4
ID# M300011
08/06
Attach the bumpers (12) to
the top of the rim (1) surface
as shown.
6.
5.
11
Install the rim (1)
assembly onto the
rod (6) above the
pole (9). Secure
with washer (7)
and acorn nut (11)
as shown. Tighten
completely.
7
1
12
1
9
4
4
Position table top (2) as shown.
7.
2
5
08/06
ID# M300011
|