2 - Line Telephone
With Speakerphone
STOP – DON’T TAKE ME BACK TO THE STORE.
LOOK – FOR THE TOLL – FREE “ HELP ” TELEPHONE NUMBER.
LISTEN– AS THE EXPERTS TALK YOU THROUGH THE PROBLEM.
For immediate answers to your questions regarding operation,
missing parts or installation, call the
Southwestern Bell Freedom Phone ®
Retail Sales Help Line at:
1-800-366-0937
Monday - Friday 8:30 a.m. - 9:00 p.m. EST
Saturday 8:30 a.m. - 12:30 p.m. EST
TOLL FREE HELP LINE
1-800-366-0937
SOUTHWESTERN BELL FREEDOM PHONE®
7475 N. Glen Harbor Blvd., Glendale, AZ 85307
FT 365
IB – 3631
Printed in China
FT365 OWNER’S MANUAL
Congratulations!
Table of Contents
You have purchased a 2 - LINE SPEAKERPHONE TELEPHONE which has been
manufactured to the highest standards set by SOUTHWESTERN BELL
FREEDOM PHONE ®. Please read this OWNER’S MANUAL thoroughly to
become acquainted with the telephone’s many features.
Important Safety Instructions................................................................................... 1
Safety Instructions for Batteries ............................................................................ 2
Unpacking, Telephone Installation.......................................................................... 4
Location of Controls................................................................................................. 5
Installation.................................................................................................................... 6
Line Cord Connection............................................................................................... 6
Power Adaptor............................................................................................................ 7
Batteries ....................................................................................................................... 7
Basic Operation.......................................................................................................... 8
Pulse/Tone Switch.................................................................................................... 8
Ringer Volume Controls .......................................................................................... 8
Handset / Speakerphone......................................................................................... 8
Speaker Volume Control.......................................................................................... 8
Handset ( Receiver ) Volume Control ................................................................... 8
Place A Call................................................................................................................ 9
Answer A Call............................................................................................................. 9
Obtain A Dial Tone Immediately After a Call Is Ended ................................. 9
Feature Operation...................................................................................................... 10
Memory Dialing........................................................................................................... 10
Mute ............................................................................................................................. 11
Lighted keypad........................................................................................................... 12
Call Waiting/Flash..................................................................................................... 12
Hold............................................................................................................................... 12
ReturnToACallOnHold .......................................................................................... 12
Conference ..................................................................................................................13
Establish A Call
UNPACKING
Check the contents of the carton to be sure that you have:
Telephone Base
Handset, Coil Cord and Telephone Line Cord
3.5mm to 2.5mm Headset Adaptor
If anything is missing or damaged, contact the place of purchase. Keep the
packaging to transport the telephone.
Telephone Installation
CAUTION
1. Never install telephone wiring during a lightning storm.
2. Never install telephone jacks in wet locations unless the jack is specifically
designed for wet locations.
3. Never touch uninsulated telephone wires or terminals unless the incoming
telephone line has been disconnected at the network interface.
4. Use caution when installing or modifying telephone lines.
5. Always disconnect all telephone lines from the wall outlets before servicing or
disassembling this equipment or replacing batteries. Read operating
manual before using.
While In Conference
At The End Of A Conference Call
Headset Jack ........................................................................................................... 14
Line Status Operation.............................................................................................. 14
Trouble Shooting...................................................................................................... 15
Repair Service.......................................................................................................... 16
FCC Wants You To Know...................................................................................... 17
Cleaning...................................................................................................................... 17
Limited Warranty ..................................................................................................... 18
3
4
Location of Controls
Installation
Base
Modular Wall Jack
A modular wall jack is required to install your FT365.
or
Installation of this telephone in locations with 4-prong jacks
or with hardwired outlets requires additional converters
(not included). Contact your local telephone company or
retailer concerning the proper converter.
CoilCordConnection
Insert the coil cord into the jack located on the bottom
of the base. Connect the other end into the jack
located on the handset.
LineCordConnection
To use both lines of a two-line telephone, two telephone numbers must be
provided by your local telephone company. If you have only one telephone
number, another line can be installed by your telephone company.
For One Two-Line Jack
Insert one plug of the 4-wire modular line cord (included) into the wall jack,
making sure it snaps firmly in place. Insert the other plug of the 4-wire line cord
into the telephone jack marked “LINE 1 + 2” (on back of base).
For Two Single Line Jacks
For two single line jacks, two separate line cords are needed for the connection.
Insert one plug of the 4–wire line cord (included) into the first telephone wall
jack. Insert the other plug of the 4–wire line cord into the telephone jack (back of
unit) marked “LINE1+2”. Insert one plug of the second line cord (not included)
into the second telephone wall jack. Insert the other plug of the second line cord
into the telephone jack marked “LINE 2”
6
5
Basic Operation
PULSE/TONE SWITCH
SET THIS SWITCH (on the side of base) TO THE SERVICE (PULSE or TONE)
SUPPLIED TO YOUR PHONE. If you are not certain of which service you have,
set the switch to TONE. Lift the HANDSET and press any number on the DIAL
KEYPAD. If the dial tone persists, reset to PULSE.
Power Adaptor
RINGER VOLUME CONTROLS
You can connect an optional Class 2 Power Adaptor (not included), which is
listed to UL1310, for increased speakerphone performance. Connect the power
adaptor into the DC Adaptor Jack (9VDC 100mA) on the back of the base and
into the wall power outlet, You can purchase a Power Adaptor through our help
line at 1-800-366-0937, our secure website at
The RINGER VOLUME CONTROLS for both Line 1 and Line 2 (on the right side
of the base) adjust the ringing volume of each individual line. Set the switch to
HIGH, LOW, or OFF.
HANDSET / SPEAKERPHONE
http://www.swbfreedomphone.com or your local retailer.
You can use either the HANDSET or SPEAKERPHONE mode during a
conversation. During a call, one or the other can be used, and they can be
interchanged at any time other than during dialing. The HANDSET is activated
when the HANDSET is lifted off its cradle.
Wall Mounting on a Wall Plate
Your FT365 telephone is also designed to be mounted on a wall, which uses the
“One Jack” option. Insert one plug of the short line cord into the wall jack, and
insert the other plug into the telephone jack marked “LINE1+2”, making sure the
plugs snap firmly in place, You can weave the cord through the notches on the
bottom of the base. Position the wall mount slots on the bottom of the base over
the two studs on the wall plate. Push down to lock in place.
The SPEAKERPHONE is activated when you press the SPEAKERPHONE
BUTTON, and the SPEAKERPHONE BUTTON will then light.
At the end of the call, press the SPEAKERPHONE BUTTON again, and the
SPEAKERPHONE BUTTON will turn off. To switch from the SPEAKERPHONE to
the HANDSET, lift the HANDSET. To switch from the HANDSET to the
SPEAKERPHONE (without losing the call), press the SPEAKERPHONE
BUTTON first before you place the HANDSET in the cradle, and the
SPEAKERPHONE BUTTON will light.
Wall Mounting on Two Screws
If you do not have a wall phone plate and want to install your FT365 onto the
wall, fasten two screws (not included) into the wall, using anchors for secure
assembly. Locate the screws 3 1/4 apart vertically. They should extend 3/16 from
the wall. Insert one plug of long 4-wire line cord into the wall jack, and insert the
other plug into the telephone jack marked “LINE1+2”, making sure the plugs
snap firmly in place. You can weave the cord through the notches on the bottom
of the base, Position the wall mount slots on the bottom of the base over the two
screws on the wall. Push down to lock in plage.
SPEAKER VOLUME CONTROL
When using the Speakerphone, adjust the speakerphone loudness by moving
the SPEAKER VOLUME CONTROL (on the side of the base) from LOW to HIGH.
HANDSET (RECEIVER) VOLUME CONTROL
When speaking through the handset, adjust the receiver loudness of the
handset by moving the RECEIVER VOLUME CONTROL ( on the side of the
handset ) to NORM or HIGH.
BATTERIES
Four 1.5 - volt AAA alkaline batteries (not included) are required to work the
telephone functions properly.
In normal use, the batteries will last approximately six months.
Install the batteries into the compartment on the bottom of the telephone:
1. OpentheBATTERYCOMPARTMENTCOVER.
2. Insert the batteries, matching the plus and minus signs
in the COMPARTMENT.
3. Replace the COVER.
8
7
Basic Operation
Feature Operation
PLACE A CALL
MEMORY DIALING
Your FT365 is equipped with 16 memories (six priority speed dial, ten keypad )
for programming your most frequently dialed telephone numbers. You can store
up to 32 digits in each of the speed dial keys (1-6) near the top of the phone, or
in each of the translucent dialing keys (0-9).
Numbers must be stored with the HANDSET lifted. They will be stored as dialed,
in the PULSE or TONE mode.
1. Lift the HANDSET (or press the SPEAKERPHONE BUTTON).
You will hear a dial tone, and the activated LINE 1 / LINE 2 ( or the
SPEAKERPHONE) button will light.
2. Press LINE 1 or LINE 2 BUTTON to switch to the other line. The newly
activated LINE 1 / LINE 2 BUTTON will light.
3. When you hear a dial tone, dial the number.
To enter numbers on the MEMORY INDEX CARD, pry out the plastic cover, take
out the card, make your entries, then reinsert the CARD and COVER.
Mixed Dialing: If you have Pulse Service, you can temporarily switch to Tone
dialing if required for various custom services. Press the “ * ” BUTTON and all
further dialing functions will be in the TONE mode, until you end the call.
To Program A Number Into Memory
1. Lift the HANDSET. You will hear a dial tone.
2. Press the STORE BUTTON.
3. Using the KEYPAD, enter the telephone number
you wish to store (32 digit maximum).
4. Press the STORE BUTTON again.
5. Press one of the SPEED DIAL KEYS ( 1-6) near
the top of the phone or the translucent dialing keys (0-9). The telephone
number will be stored in this location.
4. At the end of the call, return the HANDSET to the CRADLE or, if you used the
SPEAKERPHONE, press the SPEAKERPHONE BUTTON again.
The lit buttons and keypad will go off.
6. To continue programming a telephone number into another memory location,
repeat steps 2-5. To end programming numbers, return the HANDSET to the
CRADLE.
ANSWER A CALL
7. The telephone number can be dialed on either LINE 1 or LINE 2.
When a call is received, the LINE 1 or LINE 2 button will flash, to indicate which
line is ringing.
1. Lift the HANDSET (or press the SPEAKERPHONE BUTTON) to answer the
call. The activated LINE1/LINE2 ( or the SPEAKERPHONE ) button will be lit
solid.
2. When the conversation is completed, hang up the telephone or press the lit
LINE 1 / LINE 2 button. The lit buttons and keypad will go off.
NOTE: Your FT365 features two distinct rings, one for each line.
OBTAIN A DIAL TONE IMMEDIATELY AFTER A CALL IS ENDED
At the end of a call, if you wish to start another call without hanging up the
handset, press the FLASH BUTTON. You will hear a dial tone.
9
10
Feature Operation (con’t)
Feature Operation (con’t)
TO ERASEA STORED NUMBER:
To erase a stored number, simply store a new number in the same location. The
new number will replace the previous one.
LIGHTED KEYPAD
A lighted keypad is provided for better visibility.
NOTE: In both the SPEAKERPHONE and HANDSET MODES, the keypad will light
while a phone number is dialed. While in the SPEAKERPHONE MODE, the
keypad will slowly turn off within 5-10 seconds after a phone number is dialed.
In the HANDSET MODE, the keypad will remain lit for as long as the HANDSET
is off the CRADLE.
TO DIAL PRIORITY NUMBERS
1. Lift the HANDSET or use the SPEAKERPHONE.
2. Refer to the “PLACE A CALL” section to choose the desired
LINE1/LINE2.
CALL WAITING/FLASH
3. Press the desired SPEED DIAL KEY (1-6) near the top of the unit.
4. Your programmed telephone number will automatically be dialed.
IFCALLWAITINGSERVICEISAVAILABLEFROMYOURTELEPHONECOMPANY
AND YOU HAVE THIS SERVICE, you will be alerted by a signal (determined by
your telephone company) if there is another call.
TO DIAL KEYPAD MEMORY NUMBERS
1. Lift the HANDSET or use the SPEAKERPHONE.
2. Refer to the “PLACE A CALL” section to choose the desired
LINE 1 / LINE 2.
3. Press the MEMORY BUTTON.
4. Press the desired translucent dialing key (0-9) on the
keypad.
NOTE: Your conversation will be muted momentarily during this signal.
1. When you hear the signal, to access the new call
without disconnecting the call you are on, press
the FLASH BUTTON.
2. To return to your original conversation, press the
FLASH BUTTON again.
5. Your programmed telephone number will automatically be dialed.
This procedure can be repeated as frequently as you desire. (Refer to your
Telephone Company’s instructions for this service.)
The FLASH BUTTON can also be used to access a new dial tone without
hanging up, or to access other custom telephone company services.
CHAIN/COMBINATION DIALING
NUMBERS IN TWO OR MORE MEMORY LOCATIONS CAN BE DIALED IN
SEQUENCE, AND COMBINED MANUAL AND MEMORY DIALING IS POSSIBLE IN
EITHER ORDER.
This is especially convenient when using a long distance custom service that
requires more than 32 digits.
HOLD
THE PARTY YOU ARE CONVERSING WITH CAN BE PUT ON HOLD.
1. Whether you are using the HANDSET or SPEAKERPHONE,
press the HOLD BUTTON. The LINE 1 / LINE 2 BUTTON will flash
slowly (and the SPEAKERPHONE BUTTON LED will go off).
REDIAL
THE LAST NUMBER YOU DIALED, MANUALLY OR BY SPEED
DIALING, CAN BE REDIALED AUTOMATICALLY. The maximum
number of digits that can be redialed is 32.
1. Lift the HANDSET, or use the SPEAKERPHONE.
2. Refer to the “PLACE A CALL” section to choose the desired LINE1/LINE2.
3. When you have a dial tone, press the REDIAL BUTTON. The number will be
automatically dialed.
RETURN TO A CALL ON HOLD:
a.Lift the HANDSET (or press the SPEAKERPHONE BUTTON).
The LINE 1 / LINE 2 (and SPEAKERPHONE) buttons will be
lit solid, and this call is no longer on Hold.
NOTE: - A call on Hold can be picked up by any single–line telephone connected on
the same line.
- When the call is on Hold, do NOT press the HOLD BUTTON a second time to
release the hold.
- There will be a brief pause after releasing the hold before you can hear the
caller.
b. If you are not already connected to the caller, press the LINE BUTTON with the
IN USE LED flashing.
MUTE
Prevent sound from your room from being heard by another party on the phone.
Press and hold the MUTE BUTTON for as long as you want this feature
activated. Once you release the MUTE BUTTON, the outside caller can hear you
again.
11
12
Feature Operation (con’t)
Feature Operation (con’t)
CONFERENCE
ESTABLISH A CALL:
The CONFERENCE BUTTON establishes a three-way conversation with you and
the callers on Lines 1 and 2.
a. Make a call to one outside party.
HEADSET JACK
You can connect a headset (not included) for hands-free conversations.
1. Insert the headset plug (must be 5/32 inch / 3.5mm type) into the headset
jack on the side of the base. You may need to lift the rubber protective cover
from the jack.
The activated LINE 1 / LINE 2 BUTTON will be lit solid.
b. Press the HOLD BUTTON.
The activated LINE 1 / LINE 2 BUTTON will flash rapidly.
c. Press the other LINE BUTTON.
You will hear a dial tone, and the second activated LINE 1 / LINE 2 BUTTON
will be lit solid.
2. Adjust the headset microphone to a comfortable position, placing it near your
mouth.
3. Press the SPEAKERPHONE BUTTON to make or receive a call. Adjust the
volume to a desirable level by moving the speaker volume switch (on the side
of the base).
NOTE:
d. Make a call to the second outside party.
e. Press the CONFERENCE BUTTON, and the LINE 1 and LINE 2 BUTTONS will
both be lit solid. YOU can now speak with both callers at the same time.
NOTE: In the conference mode, there may be a slight decrease in volume for the
2 callers.
1. If you are using a headset (not included) with a 2.5mm plug, attach the
headset adaptor (included) to the headset jack (on the side of the base).
Then insert the headset plug into the adaptor.
2. You can purchase a suitable headset through our help line at
1-800-366-0937, or our secure website at
WHILE IN CONFERENCE:
To put one caller on hold, press the HOLD BUTTON, and the LINE 1 and LINE 2
BUTTONS will alternately flash.
If you wish to continue speaking with the caller on Line 1, press the LINE 1
BUTTON, and that button will be lit solid. If you wish to speak with the caller on
Line 2, press the LINE 2 BUTTON, and that button will be lit solid.
To return to the conference call (and speak with both callers), press the
CONFERENCE BUTTON. The LINE 1 / LINE 2 BUTTONS will both be lit solid.
LINE STATUS OPERATION
STATUS
LINE 1 BUTTON LINE 2 BUTTON
AT THEEND OF A CONFERENCE CALL:
LED
LED
To speak to one party and disconnect the other, press the LINE BUTTON for the
caller with which you wish to continue the conversation, The other caller will be
disconnected. To disconnect both parties, hang up the handset or press the
SPEAKERPHONE BUTTON (if you are already in the speakerphone mode).
ON HOOK
OFF
OFF
LINE 1 RINGING FLASH RAPIDLY OFF
LINE 1 IN USE
LINE 1 HOLD
LIT SOLID
OFF
FLASH SLOWLY OFF
LINE 2 RINGING OFF
FLASH RAPIDLY
LIT SOLID
FLASH SLOWLY
LINE 2 IN USE
LINE 2 HOLD
OFF
OFF
CONF. MODE
LINES 1 & 2
HOLD
ON
ON
FLASH SLOWLY FLASH SLOWLY
13
14
TROUBLE SHOOTING
Repair Service
If the solution to your problem is not listed below, call our toll-free SERVICE
NUMBER 1-800-366-0937, Monday - Friday 8:30 a.m. - 9.00 p.m. (EST), and
Saturday 8:30 a.m.- 12:30 p.m. (EST). You can also visit our website at
According to FCC regulations, this equipment, which has been certified and
registered by the FCC, may only be repaired by authorized persons. If repairs or
adjustments are made by an unauthorized person, the FCC certification may be
voided. Should your encounter any problems, please call the
Southwestern Bell Freedom Phone ® toll-free Customer Help Line for
assistance:
PROBLEM
No dial tone.
POSSIBLE CAUSE
Improper Installation.
CORRECTION ACTION
Recheck all modular plug connections. Press
the corresponding key (Line 1or Line 2).
Try another phone jack. If your phone works
on another jack, you may have a problem with
your wiring. Contact your local phone
company.
Monday - Friday 8:30 am - 9:30 p.m. (EST). and Saturday 8:30 a.m - 12:30 p.m.
Problem with the wiring.
FOR IN-WARRANTY SERVICE:
Package your complete unit (including all line cords, and other accessories) and
ship the unit postage prepaid* and insured (for your protection) to:
Cannot make outgoing calls. Tone/Pulse switch is not set correctly. Check the Tone/Pulse switch. If positioned in
tone mode, switch to pulse, as you may have
pulse dialing service.
Set the Ringer Off/Low/High switch to the
Low or High position.
SOUTHWESTERN BELL FREEDOM PHONE ®
DEPT.: In Warranty
7475 N. Glen Harbor Blvd., Glendale, AZ 85307
The phone does not ring.
Ringer Off/Low/High switch is not set
correctly
Too many telephones are installed on Contact your telephone company to
Be sure to include your return address, proof of purchase, a daytime phone
number, $9.50 for postage and handling*, and a brief explanation of your
difficulties.
* NOTE: California residents need only provide proof of purchase and should
call 1-800-366-0937 for shipping instructions.
the same line.
determine the maximum number of extensions
for your calling area.
Memory dialing does not
work.
The memory storage procedure was not Carefully review the store sequence and
followed correctly.
reenter your programmed number.
The sound volume is too
low .
Another extension is off hook.
Hang up extension.
FOROUT-OF-WARRANTYSERVICE:
Receiver volume control is too low
Adjust receive volume control level.
you may call our toll-free Help Line for the price of a replacement before
returning your unit. Please follow all instructions for In – Warranty Service
(above) to return your unit, and mark the package: DEPT.: Out - of - Warranty.
Cannot hear any sound or
dial tone through the
handset or speakerphone.
The hold function does not The batteries need to be replaced or
work.
The LINE 1 or LINE 2
BUTTONS do not light or
are too weak.
The headset may still be connected to Unplug the headset from the FT365 base,
the unit.
and make the call through the handset or
speakerphone.
Install four fresh AAA batteries before initial
use
QUESTIONS?
STOP ... DON’T TAKE ME BACK TO THE STORE.
LOOK...FOR THE TOLL–FREE“HELP”TELEPHONE NUMBER.
LISTEN... AS THE EXPERTS TALK YOU THROUGH THE PROBLEM
have not been installed.
The batteries have not been installed or Install four fresh AAA batteries before initial
need to be replaced.
use.
The LINE 2 BUTTON is
constantly lit solid.
Only a single line jack is Connected.
The telephone may not be connected to numbers to use both the Line 1 and Line 2
the correct jack. (on the back of the
base).
The conference mode may be activated. Press one of the LINE BUTTONS to release
the conference mode.
You must have 2 separate telephone
For immediate answers to your questions regarding operation, missing parts or
installation, call the
functions. Refer to page 6 for installation
instructions.
Southwestern Bell Freedom Phone ® Help Line:
1-800-366-0937
Hear both a dial tone and
the outside caller.
HEARING AID COMPATIBILITY
Your FT365 is compatible with inductively coupled hearing aids.
15
16
FCC Wants You To Know
Limited Warranty
The obligation of Southwestern Bell Freedom Phone ® Retail Sales under this
warranty shall be limited to repair or replacement (at our option) during the
warranty period of any part which proves defective in material or workmanship
under normal installation, use and service, provided the product is returned to
Southwestern Bell Freedom Phone ® Retail Sales or to one of our authorized
Service Centers TRANSPORTATION CHARGES PREPAID. (California residents
should call 1-800-366-0937 for shipping instructions.) Products returned to us
or to an Authorized Service Center must be accompanied by a copy of the
purchase receipt In the absence of such purchase receipt, the warranty period
shall be one (1) year from the date of manufacture.
To obtain service under this warranty, return the defective product to the service
center nearest you together with your sales slip and $9.50 for postage and
handling. California residents need only provide proof of purchase. You may
also have other warranty rights which vary from state to state.
This equipment complies with Part 68 of the FCC rules. On the bottom of the
base of this equipment is a label that contains, among other information, the
FCC Registration Number and Ringer Equivalence Number (REN) for this
equipment. You must, upon request, provide this information to your telephone
company.
The REN is useful to determine the quantity of devices you may connect to your
telephone line and still have all of those devices ring when your telephone
number is called. In most, but not all areas, the sum of the RENS of all devices
connected to one line should not exceed five (5.0). To be certain of the number of
devices you may connect to your line, as determined by the REN, you should
contact your local telephone company to determine the maximum REN for your
calling area.
If your telephone equipment, causes harm to the telephone network, the
telephone company may discontinue your service temporarily. If possible, they
will notify you in advance. But if advance notice isn’t practical, you will be notified
as soon as possible. You will be informed of your right to file a complaint with
the FCC.
This warranty shall be invalid if the product is damaged as a result of
defacement, misuse, abuse, neglect, accident, destruction, or alteration of the
serial number, improper electrical voltages or currents, repair, alteration or
maintenance by any person or party other than our own service facility or an
authorized service center, or any use violative or instructions furnished by us.
This warranty is also rendered invalid if this product is removed from the country
in which it was purchased, if it is used in a country in which it is not registered
for use, and/or if it is used in a country for which it was not designed. Due to
variations in telephone systems and communications laws, this product may be
illegal for use in some countries. Southwestern Bell Freedom Phone ® Retail
Sales assumes no responsibility for damages or penalties incurred resulting
from the use of this product in a manner or location other than that for which it is
intended.
This one-year warranty is in lieu of all other expressed warranties, obligations, or
liabilities. ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES,
INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE
LIMITED IN DURATION TO THE ONE-YEAR DURATION OF THIS WRITTEN
LIMITED WARRANTY. Some states do not allow limitations on how long an
implied warranty lasts, so the above limitations may not apply to you.
IN NO EVENT SHALL WE BE LIABLE FOR ANY SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER
WARRANTY, EXPRESSEDORIMPLIED1, WHATSOEVER.
Your telephone company may make changes in its facilities, equipment,
operation or procedures that could affect the proper functioning of your
equipment. If they do, you will be notified in advance to give you an opportunity to
maintain uninterrupted telephone service. If you experience trouble with this
telephone equipment disconnect from the network until the problem has been
corrected or until you are sure that the equipment is not malfunctioning. This
equipment may not be used on coin service provided by the telephone company.
Connection to party lines is subject to state tariffs. This equipment is hearing aid
compatible.
Warning : Changes or modifications to this unit not expressly approved by the
party responsible for compliance could void the user’s authority to operate the
equipment.
Cleaning
Use a damp cloth for cleaning.
Never use abrasives or solvents in cleaning.
Never spray cleaners directly on the telephone.
Some states do not allow the exclusion or limitation of special, incidental or
consequential damages, so the above limitation or exclusion may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state.
17
18
|