2-697-099-11(1)
Making Audio/Video Connections
Your new TV includes various types of video inputs and analog audio jacks.
Use the outputs/inputs that are available on your components that provide the best
audio/video performances:
KLV-23S200A
KLV-26S200A
KLV-32S200A
KLV-40S200A
Best Audio/Video
Performance
Connector type
Connector type
HDMI (High-Definition
Multimedia Interface)
Analog Audio
DVI (Digital Visual Interface)
Will require an adapter to connect to this TV.
Component video
S VIDEO
Quick Setup Guide
For further information, see the operating instruction supplied with the TV.
Please retain this guide for your future reference.
Composite video
The connection diagrams shown below and on the reverse side are recommendations only;
other possible solutions may exist. Connections that include an AV receiver can often be
complex, so check your AV receiver’s instruction manual for additional details.
See the “Cables Required” chart that appears with the diagram to determine which cables you’ll
need. Depending on the components you plan to connect, you may need to purchase extra cables.
Running Initial Setup
Initial Setup
POWER
1 Press
to turn on the TV.
The Initial Setup screen appears.
Please select your language
English
Español
Français
2 Press V/v to highlight the on-screen display
Upgrade your signal to high-definition programming to view the same picture
quality at home as you've seen in the store. Contact your cable or satellite provider
for upgrading to high-definition TV for stunning detail and richer sound.
language. Then press
.
The message “First please connect cable/
antenna. Do you want to start Auto Program?” appears.
Auto Program
3 Press B/b to highlight “OK” then press
.
Programmed Channel:
10
4 When Initial Setup is complete, the TV will
ForYour Convenience
Please contact Sony directly if you have questions on the use of your television after
reading your Quick Setup Guide and manual.
Now tuning
display the Channel Setup menu.
Contact Sony Customer Support at:
To run Auto Program again at a later time
Refer to the manual on “Initial Setup” and “Auto Program” sections.
or to speak with a support representative:
Canada
1-877-899-SONY (7669)
8:00 AM - 6:00 PM (Eastern)
8:00 AM - 5:00 PM (Western)
Please Do Not Return the Product to the Store
Sony Corporation © 2006 Printed in Mexico
Cables Required
A
B
Cables Required
Splitter
1
4
2
1
3
1
1
Splitter
1
3
1
1
2
1
Use this diagram if you have;
Use this diagram if you have;
Coaxial
Coaxial
DVD
Player
PC
Composite
Component
Audio
DVD
PC
Cable Box
AV Receiver
VCR
VCR
Composite
Component
Audio
Player
or
Satellite Receiver
HD15-HD15
Optical Audio
HD15-HD15
If your DVD player has an HDMI jack, use that
instead of the video connections shown here.
If your DVD player or satellite receiver has an
HDMI jack, use that instead of the video
connections shown here.
If you are not using a cable box or
satellite receiver, connect your cable to
the VCR’s RF IN jack.
7
6
RGB
R
AUDIO
L
AUDIO
PC IN
HD/DVD IN
VIDEO IN
(1080i/720p/480p/480i)
1
3
4
5
S VIDEO
Y
P
B
R
VIDEO
P
(VAR/FIX)
AUDIO OUT
L
L
(MONO)
AUDIO
R
AUDIO
R
Continued,
|