Sony Microcassette Recorder ICD ST20 User Manual

3-251-798-11(1)  
IC Recorder  
Operating Instructions  
Owner’s Record  
The model number is located at the rear and the serial  
number is located inside the battery compartment.  
Record the serial number in the space provided below.  
Refer to these numbers whenever you call upon your  
Sony dealer regarding this product.  
Model No. ICD-ST10 Serial No.  
ICD-ST20/ST10  
© 2003 Sony Corporation  
 
Notice for users  
Program © 1999, 2000, 2001, 2002, 2003 Sony Corporation  
Documentation ©2003 Sony Corporation  
All rights reserved. This manual or the software described herein, in whole or in part,  
may not be reproduced, translated or reduced to any machine readable form without  
prior written approval from Sony Corporation.  
IN NO EVENT SHALL SONY CORPORATION BE LIABLE FOR ANY INCIDENTAL,  
CONSEQUENTIAL OR SPECIAL DAMAGES, WHETHER BASED ON TORT,  
CONTRACT, OR OTHERWISE, ARISING OUT OF OR IN CONNECTION WITH  
THIS MANUAL, THE SOFTWARE OR OTHER INFORMATION CONTAINED  
HEREIN OR THE USE THEREOF.  
Sony Corporation reserves the right to make any modification to this manual or the  
information contained herein at any time without notice.  
The software described herein may also be governed by the terms of a separate user  
license agreement.  
• This software is for Windows and cannot be used for Macintosh.  
• The supplied connecting cable is for the IC recorder ICD-ST20/ST10 only. You  
cannot connect other IC recorders.  
Information  
I
N NO EVENT SHALL SELLER BE LIABLE FOR ANY DIRECT, INCIDENTAL OR  
CONSEQUENTIAL DAMAGES OF ANY NATURE, OR LOSSES OR EXPENSES  
RESULTING FROM ANY DEFECTIVE PRODUCT OR THE USE OF ANY PRODUCT.  
Trademarks  
• “LPEC” is the trademark of Sony Corporation.  
• IBM and PC/AT are registered trademarks of International Business Machines  
Corporation.  
• Microsoft, Windows and Outlook are trademarks of Microsoft Corporation,  
registered in the U.S.A. and other countries.  
Copyright ©1995 Microsoft Corporation.  
All rights reserved.  
Portion Copyright ©1995 Microsoft Corporation  
• Apple and Macintosh are trademarks of Apple Computer Inc., registered in the  
U.S.A. and other countries.  
• Pentium is a registered trademark of Intel Corporation.  
• NaturallySpeaking, Dragon Systems are trademarks owned by ScanSoft, Inc. and  
are registered in the United States and/or other countries.  
• All other trademarks and registered trademarks are trademarks or registered  
trademarks of their respective holders. Furthermore, “™” and “®” are not  
mentioned in each case in this manual.  
The “Digital Voice Editor” uses software modules as shown below:  
Microsoft® DirectX® Media Runtime  
©2001 Microsoft Corporation. All rights reserved.  
GB  
3
 
Table of Contents  
Getting Started........................................................................ 6  
Step 1: Installing the Batteries ............................................................................. 6  
Replacing the Batteries ................................................................................. 7  
Step 2: Setting the Clock ...................................................................................... 8  
Basic Operations .................................................................... 10  
Recording Messages ............................................................................................ 10  
Tips for Using the Built-in Microphone ................................................... 13  
Using Convenient Functions while Recording ....................................... 14  
Recording with an External Microphone or Other Equipment .................... 16  
Recording with an External Microphone ................................................. 16  
Recording from Other Equipment ............................................................ 16  
Recording with Other Equipment ............................................................ 17  
Playing Back Messages ....................................................................................... 18  
Using the Display Window ................................................................................ 23  
Selecting the Display Mode ............................................................................... 26  
Turning off the Display ............................................................................... 28  
Various Ways of Playback ..................................................... 29  
Adjusting the Playback Speed — DPC  
(Digital Pitch Control) ................................................................................ 29  
Adding a Bookmark ............................................................................................ 31  
Playing Back the Specified Section Repeatedly — A-B Repeat .................... 32  
Editing Messages ................................................................... 33  
Adding a Recording ............................................................................................ 33  
Adding a Recording to a Previously Recorded Message ...................... 33  
Adding an Overwrite Recording during Playback ................................ 34  
Erasing Messages ................................................................................................ 35  
Erasing Messages one by one .................................................................... 35  
Erasing All Messages in a Folder .............................................................. 37  
Dividing a Message into Two/Combining Messages .................................... 38  
Dividing a Message ..................................................................................... 38  
Combining Messages .................................................................................. 40  
Moving Messages to a Different Folder ........................................................... 41  
Adding Priority Mark(s)  
— Priority Mark Function .......................................................................... 42  
Adding Priority Mark(s) in the Stop Mode ............................................. 42  
Adding Priority Mark(s) during Playback .............................................. 43  
GB  
4
 
Other Functions ..................................................................... 44  
Playing Back a Message at a Desired Time with an Alarm ........................... 44  
Turning off the OPE Indicator (LED) ................................................................ 48  
Preventing Accidental Operation — HOLD Function ................................... 49  
Using an Adding Recording .............................................................................. 50  
Changing the Settings — MENU ...................................................................... 51  
Using the ”Digital Voice Editor“ Software ...................................................... 54  
Additional Information ......................................................... 56  
Precautions ........................................................................................................... 56  
Troubleshooting ................................................................................................... 57  
Error Messages of the IC Recorder ........................................................... 60  
System Limitations ...................................................................................... 62  
Specifications ....................................................................................................... 63  
Index to Parts and Controls ............................................................................... 64  
Index ...................................................................................................................... 66  
GB  
5
 
BGetting Started  
Step 1: Installing the Batteries  
1
Slide and lift the battery compartment lid.  
2
1
2
Insert two LR03 (size AAA) alkaline batteries with correct  
polarity, and close the lid.  
2
1
If the battery compartment lid is  
accidentally detached, attach it  
as illustrated.  
Clock setting display appears when you insert batteries for the first time,  
or when you insert batteries after the unit has been without batteries for a  
certain period of time. Please refer to steps 3 to 6 in Step 2: Setting the  
Clockon pages 8 and 9 to set the date and time.  
Using on house current  
Connect the AC power adaptor AC-E30HG (not  
supplied) to the DC IN 3V jack of the unit and to  
the wall outlet. Do not use any other AC power  
adaptor.  
Polarity of the plug  
GB  
6
 
Replacing the Batteries  
The battery indicator on the display window shows the battery condition.  
Notes  
Do not use manganese batteries for this unit.  
When you replace the batteries, insert the new ones within 3 minutes after you  
remove the exhausted ones. Otherwise, the display may show the clock setting  
display or incorrect date and time when you re-insert the batteries. In this  
case, set the date and time again. The recorded messages and alarm setting,  
however, will remain.  
Do not charge dry batteries.  
When you are not going to use the unit for a long time, remove the batteries to  
prevent damage from battery leakage and corrosion.  
Battery remain indication  
:
Replace both of the two batteries with new ones.  
m
:
The unit will stop operation.  
Battery life (Using Sony alkaline batteries LR03 (SG))  
(Recording mode:)  
In continuous recording: Approx. 10 hours Approx. 12 hours Approx. 14.5 hours  
In continuous playback: Approx. 6.5 hours Approx. 7.5 hours* Approx. 8.5 hours*  
ST (Stereo)  
SP  
LP  
* When playing back through the internal speaker with the medium volume  
level  
* The battery life may shorten depending on the operation of the unit.  
Note on the ACCESSmessage  
The unit is accessing data while ACCESS“  
appears in the display window or the OPE  
indicator flashes in orange. While accessing, do  
not remove the batteries or AC adaptor. Doing so  
may damage the data.  
Note  
If the unit is required to process excessive amount of data, ACCESSmay be  
displayed for an extended period of time. This is not a malfunction of the unit.  
Wait until the message disappears before starting operation.  
GB  
7
 
Step 2: Setting the Clock  
You need to set the clock to use the alarm function or record the date and  
time.  
Clock setting display appears when you insert batteries for the first time,  
or when you insert batteries after the unit has been without batteries for a  
certain period of time. In this case, proceed from step 4.  
Jog lever  
Press up (>).  
Turn toward MENU.  
Press the center  
(xB).  
Press down (.).  
1
2
Turn the jog lever toward  
MENU.  
The menu mode will be displayed in  
the display window.  
Press the jog lever up or down  
(>/.) to select “SET DATE”.  
3
4
Press the jog lever (xB).  
The date and time setting window is  
displayed. The year digits will flash.  
Set the date.  
1 Press the jog lever up or down  
(>/.) to select the digits of  
the year.  
GB  
8
 
2 Press the jog lever (xB).  
The month digits will flash.  
3 Set the month and day in  
sequence, then press the jog lever  
(xB).  
The hour digits will flash.  
v
5
Set the time.  
1 Press the jog lever up or down  
(>/.) to select the digits of  
the hour.  
2 Press the jog lever (xB).  
The minute digits will flash.  
3 Set the minute.  
4 Press the jog lever (xB).  
The menu mode will be  
displayed again.  
Note  
If you do not press the jog lever  
(xB) for more than one minute,  
the clock setting mode is cancelled  
and the window will return to  
normal display.  
6
Turn the jog lever toward  
MENU.  
The window will return to normal  
display.  
1 If the unit is left unused for more than 3  
seconds in the stop mode after the clock  
is set, the display will show the current  
time (page 26).  
GB  
9
 
BBasic Operations  
Recording Messages  
You can record the maximum of 99 messages in each of the five (A, B, C, D  
and E) folders. You can record messages in the following three ways:  
Add a recording behind the last recorded message  
Add a recording to a previously recorded message (page 33)  
Add an overwrite recording (page 34)  
This section explains how to add a recording behind the last recorded  
message.  
11:30, November 1 12:00, November 1 10:00, November 2  
Meet Mr. Brown at  
2 p.m. tomorrow.  
Dont forget  
to call Mary  
Make remittance  
at ABC bank  
Message 1 Message 2 Message 3 Blank space  
9:00, November 4  
Send a card to  
Miss Smith  
Message 1 Message 2 Message 3 Message 4  
Recorded after the last  
recorded message  
Maximum recording time  
The maximum recording time of all the folders is as follows. You can  
record messages for the maximum recording time in a single folder.  
Recording mode:  
ST*  
SP**  
LP***  
ST, SP and LP in a mixture  
ICD-ST20  
ICD-ST10  
85 min. 261 min. 696 min. 85 min. to 696 min.  
41 min. 125 min. 334 min. 41 min. to 334 min.  
(min.: minutes)  
* ST: Stereo recording mode  
** SP: Standard play recording mode (monaural sound)  
***LP: Long play recording mode (monaural sound)  
Notes  
To record in better sound quality, select the ST mode. For switching the  
recording mode, see page 53.  
Before making a long recording, be sure to check the battery indicator (page 7).  
The maximum recording time and the number of messages you can make  
varies depending on the conditions of use.  
To avoid replacing batteries during long time recording, use the AC power  
adaptor (not supplied).  
GB  
10  
 
Select the folder.  
1
2
Turn the jog lever toward FOLDER  
repeatedly to display the folder (A, B, C, D or  
E) in which you wish to record messages.  
Selected folder  
Start recording.  
1 Press zREC/REC PAUSE button.  
You do not need to keep pressing  
zREC/REC PAUSE while recording.  
Built-in  
microphone  
2 Speak into the built-in microphone.  
Remaining memory  
Microphone sensitivity  
Recording mode  
Current message  
number  
OPE indicator  
(lights in red during  
recording**)  
Counter display*  
* The display selected with the DISP in the menu (page 26) appears.  
**When the LED in the menu is set to OFF, the OPE indicator turns off (page 48).  
Notes  
While the OPE indicator flashes or turns in orange, do not remove the  
batteries or the AC adaptor. Doing so may damage the data.  
Noise may be recorded if an object, such as your finger, etc., accidentally rubs  
or scratches the unit during recording.  
Continued  
GB  
Download from Www.Somanuals.com. All Manuals Search And Dow1nl1oad.  
Press  
                                                                     
xSTOP.  
                                                                     
Recording Messages (continued)  
Stop recording.  
3
The unit stops at the beginning of the current  
recording.  
If you do not change the folder after you stop  
recording, the next time you record you will  
record in the same folder.  
Other operations  
To  
Do this  
pause recording*  
Press zREC/REC PAUSE.  
During recording pause, the OPE indicator  
flashes in red and PAUSEflashes in the  
display window.  
release pause and  
resume recording  
Press zREC/REC PAUSE again.  
Recording resumes from that point.  
(To stop recording after pausing  
recording, press xSTOP.)  
review the current  
recording instantly  
Press the jog lever (xB).  
Recording stops and playback starts from  
the beginning of the message just recorded.  
review during recording  
Press the jog lever down (.) during  
recording or recording pause.  
Recording stops and you can search  
backwards while listening to fast playback  
sound. After you release the jog lever,  
playback starts from that point. You can  
add an overwrite recording from that point.  
* 1 hour after you pause recording, recording pause is automatically released  
and the unit goes into the stop mode.  
GB  
12  
 
Tips for Using the Built-in Microphone  
To record a sound centering on a specific direction  
Adjust the position of the built-in microphone.  
To record a sound centering on a specific  
direction, slide the DIRECTNL switch to ON”  
position. When you record a sound at a  
conference/meeting or in a spacious place etc.,  
use this setting.  
Note  
DIRECTNL  
The DIRECTNL switch functions only in the SPor  
LPrecording mode. For details of recording  
modes, see page 53.  
To record a sound not centering on a specific direction (all-  
directional recording)  
Slide the DIRECTNL switch to OFFposition.  
To select the sensitivity of the built-in microphone  
You can select the microphone sensitivity by setting the SENS (page 52) in  
the menu according to the recording conditions:  
H (high): To record a small sound at a meeting or in a quiet and/or  
spacious place.  
M (middle): To record at a meeting or in a quiet and/or small place.  
L (low): To record for dictation or in a noisy place.  
You can change the SENS setting with the menu during recording .  
GB  
Download from Www.Somanuals.com. All Manuals Search And Dow1nl3oad.  
Recording Messages (continued)  
Using Convenient Functions while Recording  
To monitor the recording  
When recording from the built-in microphone, you connect an ear receiver  
supplied or not supplied to the i (headphones) jack and monitor the  
recording from the connected ear receiver. You can adjust the volume with  
VOL +/, but the recording level is fixed.  
Note  
If you turn up the volume excessively or place the ear receiver near the  
microphone while monitoring recording, the microphone may pick up the  
sound from the ear receiver, causing acoustic feedback (howling sound).  
Starting recording automatically in response to the sound  
Advanced VOR function  
You can set the VOR (voice operated recording) function in the menu.  
With VOR set to ON, recording starts when the recorder detects sound,  
and VORappears in the display window. The recording pauses when  
no sound is detected, and VOR PAUSEappears. You can change the  
VOR setting with the menu during recording (page 52).  
Note  
VOR function is affected by the sound around you. Set the SENS (page 52)  
according to the recording conditions. If recording is not satisfactory after you  
have changed the microphone sensitivity, or for important recording, set the  
VOR to OFF.  
GB  
14  
 
Memory remain indication  
During recording, the remaining memory indicator decreases one by one.  
When the remaining recording time reaches 5 minutes, the remaining  
memory indication flashes.  
When the remaining time reaches 1 minute, the remaining time indication  
will flash in the display window regardless of the display mode (page 26).  
When the memory is full, recording automatically stops and FULLwill  
be displayed with an alarm sound. To continue recording, first erase some  
of the messages (page 35).  
Note  
When you set the BEEP (page 53) to OFF, an alarm sound (beep) does not  
sound.  
GB  
Download from Www.Somanuals.com. All Manuals Search And Dow1nl5oad.  
Recording with an External Microphone  
or Other Equipment  
You can record sound of an external microphone or other equipment (tape  
recorder, MiniDisc player, or etc.) with the IC recorder. Depending on the  
device you use, connect the IC recorder as follows. For available  
accessories, consult with your nearest Sony dealer.  
Recording with an External Microphone  
Connect an external microphone to  
the m (microphone) jack.  
When you connect an external  
microphone, the built-in  
mini-plug (stereo)  
microphone is automatically cut off.  
When a plug in power type  
microphone is connected, power is  
automatically supplied to the  
microphone from the IC recorder.  
Stereo  
microphone  
1 Recommended types of microphones  
You can use the ECM-719 Sony electret condenser microphone (not supplied).  
Recording from Other Equipment  
To record sound of other equipment with the IC recorder, connect the m  
(microphone) jack of the IC recorder to the earphone jack of other  
equipment (tape recorder etc.) by using the registered connecting cable.  
Note  
If you use a connecting cable without register, sound may be recorded  
interrupted. Make sure to use a registered connecting cable.  
GB  
16  
 
Recording with Other Equipment  
To record the sound of the IC recorder with other equipment, connect the  
i (headphones) jack of the IC recorder to the audio input connector  
(minijack, stereo) of other equipment.  
mini-plug (stereo)  
Tape recorder, etc.  
mini-plug (stereo)  
GB  
Download from Www.Somanuals.com. All Manuals Search And Dow1nl7oad.  
Playing Back Messages  
When playing back a previously recorded message, start from step 1.  
When playing back a message you have just finished recording, start from  
step 3.  
Select the folder.  
1
Turn the jog lever toward FOLDER  
repeatedly to display the folder (A, B, C,  
D or E) in which you wish to play  
messages.  
Selected folder  
Select the message number.  
2
Press the jog lever up or down (>/.) to display  
the desired message number.  
Press up (>): for next message number.  
Press down (.): for previous message number.  
Selected message number  
The number of messages in a folder  
Counter display*  
* The display selected with the DISP in the menu (page  
26) appears.  
GB  
18  
 
Start playback.  
i (headphones) jack  
3
1 Press the jog lever (xB).  
Counter display*  
2 Adjust the volume with VOL +/.  
* The display selected with the DISP in the menu  
(page 26) appears.  
**When the LED in the menu is set to OFF, the OPE  
indicator turns off (page 48).  
OPE indicator  
(lights in green during  
playback**)  
After playing back one message, the unit stops at the beginning of the next  
message.  
When the last message in a folder has been played back, the unit stops at  
the beginning of the last message.  
1 To listen from an ear receiver  
Connect an ear receiver (not supplied) to the i (headphones) jack. The built-in  
speaker will be automatically disconnected.  
1 To listen from an external speaker  
Connect an active or passive speaker (not supplied) to the i (headphones) jack.  
Continued  
GB  
Download from Www.Somanuals.com. All Manuals Search And Dow1nl9oad.  
Playing Back Messages (continued)  
Other operations  
To  
Do this  
stop at the current position  
(Playback Pause function)  
Press xSTOP or the jog lever (xB).  
To resume playback from that point,  
press the jog lever (xB) again.  
go back to the beginning  
of the current message*  
Press the jog lever down (.)  
once.**  
go back to previous  
messages  
Press the jog lever down (.)  
repeatedly. (During stop mode, keep the  
jog lever pressed to go back the  
messages continuously.)  
skip to the next message*  
Press the jog lever up (>) once.**  
skip to the succeeding messages Press the jog lever up (>) repeatedly.  
(During stop mode, keep the jog lever  
pressed to skip the messages  
continuously.)  
*
If you have set a bookmark on the message, the unit stops at the bookmark.  
** These operations are for when EASY-S is set to OFF. For operations when  
EASY-S is set to ON, see page 53.  
Playing back a message rapidly or slowly DPC (Digital  
Pitch Control)  
When you adjust the playback speed with the DPC in the menu (page 29),  
you can play back a message rapidly or slowing by sliding the DPC switch  
to ON. When you set the playback speed faster or slower of the normal  
speed, FASTor SLOWappears. You can change the setting during  
playback.  
GB  
20  
 
Playing back all messages in a folder continuously  
Continuous Play  
When the CONT (page 52) is set to ON in the menu, you can play back all  
the messages in a folder continuously. You can change the setting during  
playback.  
Locating quickly the point you wish to start playback (Easy  
Search)  
When EASY-S is set to ON (page 53) in the menu, you can quickly locate  
the point you wish to start playback by pressing the jog lever up or down  
(>/.) repeatedly during playback or playback pause.  
You can go back approx. 3 seconds by pressing the jog lever down (.)  
once, or advance approx. 10 seconds by pressing the jog lever up (>)  
once. This function is useful when locating a desired point in a long  
recording.  
Searching forward/backward during playback (Cue/Review)  
To search forward (Cue): Keep pressing the jog lever up (>) during  
playback and release it at the point you wish to resume playback.  
To search backward (Review): Keep pressing the jog lever down  
(.) during playback and release it at the point you wish to resume  
playback.  
The unit searches at slow speed with playback sound. It is useful to check  
one word forward or behind. Then, if you keep pressing the jog lever up or  
down, the unit starts to search at higher speed. During cue/review, the  
counter will be displayed, regardless of the display mode setting (page 26).  
Continued  
GB  
Download from Www.Somanuals.com. All Manuals Search And Dow2nl1oad.  
Playing Back Messages (continued)  
1 When playback is done to the end of the last message  
When playback or fast playback is done to the end of the last message, END”  
flashes for 5 seconds and the OPE indicator lights up in green. (You cannot  
hear the playback sound.)  
When ENDstops flashing and the OPE indicator goes off, the unit will stop  
at the beginning of the last message.  
If you keep pressing the jog lever down (.) while ENDis flashing, the  
messages are played back rapidly, and normal playback will start at the point  
you release the button.  
If the last message is long and you wish to start playback at a later part of the  
message, keep pressing the jog lever up (>) to go to the end of the message  
and then press the jog lever down (.) while ENDis flashing to go back to  
the desired point.  
For messages other than the last one, go to the beginning of the next message  
and play backward to the desired point.  
Playing back a message repeatedly Repeat Play  
During playback, press the jog lever (xB) for  
more than one second.  
will be displayed and the selected message  
will be played back repeatedly.  
To resume normal playback, press the jog lever  
(xB) again. To stop playback, press xSTOP.  
1 To play back the specified section repeatedly — A-B Repeat  
You can specify the start (A) and end (B) points and play back the specified  
section repeatedly (page 32).  
GB  
22  
 
Using the Display Window  
Parts in the display window  
6 Priority marks (42)  
7 Counter /Remaining time  
indication /Recording date  
and time indication /  
Current time indication (26)  
The display selected with the  
DISPLAY in the menu  
appears.  
8 Repeat play indicator (21, 32)  
Appears while a message or  
a specific portion (A-B) of  
the message is played back  
repeatedly.  
9 Remaining battery indicator  
(7)  
1 Remaining memory  
indicator (15)  
2 Bookmark indicator (31)  
Appears when the bookmark  
is set for a message.  
3 Folder indication  
Displays the current folder  
(A, B, C, D or E).  
4 Alarm indicator (46)  
Appears when the alarm is  
set for a message.  
5 SENS (microphone  
sensitivity) indication (52)  
Displays the current  
microphone sensitivity:  
H (high): To record at a  
meeting or in a quiet/  
spacious place.  
When the AC power adaptor  
(not supplied) is connected,  
the indicator does not  
appear.  
q; Recording mode indication  
(53)  
Displays the current  
recording mode:  
ST: Stereo Play mode  
SP: Standard Play mode  
(monaural sound)  
LP: Long Play mode  
(monaural sound)  
qa REC (Recording) indicator  
(11)  
M (middle): To record at a  
meeting or in a quiet/small  
place.  
qs Selected message number /  
Total message number in the  
folder (11, 18)  
L (low): To record for  
dictation or in a noisy  
place.  
Continued  
GB  
Download from Www.Somanuals.com. All Manuals Search And Dow2nl3oad.  
Using the Display Window (continued)  
Display examples  
xDisplay during recording and  
playback  
In an ordinary recording or playback  
mode, the message number, recording  
mode and microphone sensitivity of  
the message being recorded or played  
back, and playback counter are  
displayed in the window.  
A message is being recorded as  
the 21st message of all 21  
messages in the folder A in ST  
mode with M (middle)  
microphone sensitivity.  
In a special recording or playback  
mode such as overwrite recording, A-  
B repeat playback, or DPC play, the  
mode flashes in the display.  
When the DPC switch is set to ON  
to start playback rapidly  
xDisplay during setting the menu  
In menu setting mode, the menu  
items and current setting are  
displayed. You can change the  
setting while it is flashing.  
LP recording mode is  
being selected.  
MODE menu  
In alarm or clock setting, the date and  
time setting display appears.  
May 10, 2003is being selected.  
GB  
24  
 
Display examples  
xRemain indications  
When the battery or memory runs  
out, the remain indications flash in  
the display.  
When the remain time becomes  
shorter than 1 minute  
xError messages  
The error messages or error numbers  
will be displayed (page 61).  
When an access error occurs  
When an error number is  
displayed  
GB  
Download from Www.Somanuals.com. All Manuals Search And Dow2nl5oad.  
Selecting the Display Mode  
You can select the display mode for stop, recording and playback modes.  
1
Turn the jog lever toward MENU.  
The menu mode will be displayed.  
>
MENU  
xB  
.
2
Press the jog lever up or down  
(>/.) to select DISP.  
3
4
Press the jog lever (xB).  
The display setting window will be  
displayed.  
Press the jog lever up or down  
(>/.) to select the display  
mode.  
The display modes changes in the  
order shown to the right.  
COUNT n REM  
N
N
REC TIME n REC DATE  
5
6
Press the jog lever (xB).  
Turn the jog lever toward  
MENU.  
The menu mode exits and the  
normal mode is displayed.  
1 On current time display  
If the unit is left unused for more than 3  
seconds in the stop mode, the display  
will turn to the current time display  
mode as shown to the right, regardless  
of the display mode setting.  
GB  
26  
 
You can select the display mode from the following:  
xCOUNT (elapse time)  
Elapsed playback/recording time of  
one message.  
xREM (remaining time)  
In the playback mode: The remaining  
time of one message indication.  
In the stop and recording mode: The  
remaining recording time indication.  
xREC DATE (recorded date)  
In the playback and playback pause  
modes, the date the current message  
was recorded.  
In the recording mode, the current  
date.  
(If the clock has not been set, --Y--M--  
Dwill be displayed.)  
x REC TIME (recorded time)  
In the playback and playback pause  
modes, the time the current message  
was recorded.  
In the recording mode, the current  
time.  
(If the clock has not been set, --:--”  
will be displayed.)  
GB  
Download from Www.Somanuals.com. All Manuals Search And Dow2nl7oad.  
Selecting the Display Mode (continued)  
Turning off the Display  
The unit is not equipped with the power button.  
The display always appears on the window,  
which almost will not influence the battery life.  
To turn off the display, slide the HOLD switch in  
the direction of the arrow in the stop mode.  
HOLD  
HOLDwill flash for three seconds and then the  
display turns off in the window. To turn on the  
display, slide the HOLD switch in the opposite  
direction.  
GB  
28  
 
BVarious Ways of Playback  
Adjusting the Playback Speed DPC  
(Digital Pitch Control)  
You can adjust the speed of the playback between twice the normal speed  
(+100%) and half the normal speed (50%). The message is played back in  
natural tone thanks to the digital processing function.  
Jog lever  
(>/./xB/MENU)  
DPC  
Playing back a message rapidly or slowly  
Slide the DPC switch to ON.  
FASTor SLOWflashes for 3 seconds  
and the message is played back at the  
speed specified with the menu.  
To resume normal playback  
Slide the DPC switch to OFF.  
Continued  
GB  
Download from Www.Somanuals.com. All Manuals Search And Dow2nl9oad.  
Adjusting the Playback Speed DPC (Digital Pitch  
Control) (Continued)  
Setting the playback speed  
You can set the playback speed when the DPC switch is set to ON. The  
setting for the playback speed holds effective until you change the setting.  
1
2
Turn the jog lever toward MENU  
to display the menu mode.  
Press the jog lever up or down  
(>/.) to select DPC, then  
press the jog lever (xB).  
The playback speed setting mode  
will be displayed. The flashing  
number represents the playback  
speed in percentage with the  
standard speed as 0.  
3
Press the jog lever up or down  
(>/.) to set the playback  
speed.  
Fast play (up to +100% by 10%):  
Press up (>).  
Slow play (down to 50% by 5%):  
Press down (.).  
4
5
Press the job lever (xB).  
The specified playback speed is  
confirmed.  
Press the jog lever toward  
MENU to exit the menu mode.  
The normal display appears.  
GB  
30  
 
Adding a Bookmark  
You can add a bookmark at a point in a message and use it during  
playback. You can add only one bookmark in each message.  
ERASE  
Jog lever (>/./xB)  
DIVIDE/ (bookmark)  
During playback or stop, press DIVIDE/  
than 1 second.  
(bookmark) for more  
A bookmark is added and the bookmark  
indicator ( ) flashes for 3 seconds.  
If you add a bookmark to a message that already  
has a bookmark, a previously added bookmark is  
deleted and a bookmark is added to the newly  
specified point.  
To start playback at the bookmark  
Press the jog lever up or down (>/.) during stop so that the  
bookmark indicator flashes for 3 seconds. Then press the jog lever (xB).  
To delete the bookmark  
1
2
3
In stop mode, press the jog lever up or down (>/.) to display  
the number of the message with the bookmark you wish to delete.  
While pressing DIVIDE/  
1 second.  
(bookmark), press ERASE for more than  
Press ERASE while the bookmark indicator and ERASE are  
flashing.  
Note  
If you want to combine messages to which the bookmark is already added,  
delete the bookmark before combining messages.  
GB  
Download from Www.Somanuals.com. All Manuals Search And Dow3nl1oad.  
Playing Back the Specified Section  
Repeatedly A-B Repeat  
While playing back a message, you can set the start (A) and end (B) points  
for a section you wish to play repeatedly.  
x STOP  
Jog lever (xB)  
A-B  
(repeat)/  
PRIORITY  
1
2
During playback, press A-B  
(repeat)/PRIORITY briefly.  
The starting point (A) of the section  
you wish to play repeatedly is set.  
A-B Bflashes.  
During playback, press A-B  
(repeat)/PRIORITY briefly.  
The finishing point (B) of the section  
is set.  
A-Band “ ” are displayed and  
the specified section is played back  
repeatedly.  
To resume normal playback  
Press the jog lever (xB).  
To stop A-B Repeat playback  
Press xSTOP.  
Notes  
You cannot set A-B Repeat for a section that overlaps two or more messages.  
If you do not set the finishing point (B), the finishing point is automatically set  
at the end (or the beginning) of the message.  
GB  
32  
 
BEditing Messages  
Adding a Recording  
Notes  
At a factory setting, you cannot add a recording not to erase the message by  
accidental operation. See Using an Adding Recording(page 50) to change  
the setting.  
The added or overwritten portion of a message will be recorded in the same  
recording mode (ST, SP or LP; see page 53) as the original message, regardless  
of the current recording mode setting.  
You cannot add or overwrite a recording if the remaining memory is not long  
enough. For more information, see Troubleshooting(page 57).  
Built-in microphone  
zREC/REC PAUSE  
xSTOP  
OPE indicator  
Adding a Recording to a Previously Recorded Message  
You can add a recording to the message being played back.  
The added recording will be placed after the current message and counted  
as a part of the message.  
During playback  
of Message 3  
Message 3  
Message 4  
After adding  
a recording  
Message 3  
Message 4  
Added recording  
Meeting at 2 oclock  
on December 1.  
at Conference  
room A  
Continued  
GB  
Download from Www.Somanuals.com. All Manuals Search And Dow3nl3oad.  
Adding a Recording (Continued)  
1
2
During playback, press zREC/REC PAUSE  
briefly.  
The RECand ADDwill flash and the unit stops  
in the recording pause mode.  
While the RECand ADDare flashing, press  
zREC/REC PAUSE.  
The RECis displayed and ADDflashes for 3  
seconds on the display window. The OPE indicator  
will turn red. Then the new recording will be added  
at the end of the current message.  
3
Press xSTOP to stop the recording.  
Adding an Overwrite Recording during Playback  
You can add an overwrite recording after the selected point in a recorded  
message. The part of the message after the selected point is deleted.  
The starting point of an overwrite recording  
Message 2  
Message 2  
Message 3 Message 4  
The deleted part of  
Message 2  
Message 3 Message 4  
Added overwrite recording in Message 2  
1
2
During playback, press zREC/REC PAUSE  
briefly.  
The RECis displayed. OVERflashes on the  
display window and the OPE indicator flashes in red.  
Press zREC/REC PAUSE to start recording.  
The display returns to the display mode set in the  
menu and the OPE indicator turns red.  
3
34  
Press xSTOP to stop the recording.  
GB  
 
Erasing Messages  
You can erase the recorded messages one by one or all messages in a folder  
at a time.  
Note  
Once a recording has been erased, you cannot retrieve it.  
ERASE  
xSTOP  
Jog lever (FOLDER)  
Erasing Messages one by one  
You can erase unnecessary messages only.  
When a message is erased, the remaining messages will advance and be  
renumbered so that there will be no space between messages.  
Erase Message 3  
Message 1 Message 2 Message 3 Message 4 Message 5  
Before erasing  
After erasing Message 1 Message 2 Message 3 Message 4  
Remaining messages are renumbered.  
Continued  
GB  
Download from Www.Somanuals.com. All Manuals Search And Dow3nl5oad.  
Erasing Messages (Continued)  
1
Press ERASE while playing back the  
message you want to erase or press  
ERASE for more than 1 second during  
stop mode.  
The message number and ERASE”  
will flash while the first and last 5  
seconds of the message are played  
back 10 times.  
2
Press ERASE while the message is being played back and  
ERASEis flashing.  
The message is erased and the  
remaining messages will be  
renumbered. (For example, if you  
erase Message 3, Message 4 will be  
renumbered as Message 3. When  
erasing is completed, the unit will  
stop at the beginning of the following  
message.)  
To cancel erasing  
Press xSTOP before step 2.  
To erase other messages  
Repeat steps 1 and 2.  
To erase a message partially  
First divide the message (see page 38) and then follow the steps on this  
page to erase the message.  
GB  
36  
 
Erasing All Messages in a Folder  
You can erase all recorded messages in a folder.  
1
Turn the jog lever toward  
FOLDER repeatedly to display  
the folder (A, B, C, D or E)  
containing the messages you  
want to erase.  
2
While pressing xSTOP, press  
ERASE for more than 1 second.  
The message number and ALL  
ERASEwill flash for 10 seconds.  
3
While ALL ERASEis flashing,  
pressing ERASE.  
All the recorded messages contained  
in the folder are deleted. The folder  
itself will not be deleted.  
To cancel erasing  
Press xSTOP before step 3.  
GB  
Download from Www.Somanuals.com. All Manuals Search And Dow3nl7oad.  
Dividing a Message into Two/  
Combining Messages  
You can divide a message, or combine messages.  
You can divide a message into two while recording/playing back  
messages.  
You can combine messages in stop mode (see page 40).  
ERASE  
xSTOP  
Jog lever (>/.)  
DIVIDE/  
(bookmark)  
Note  
Due to the recording system of an IC recorder, you may not be able to divide or  
combine messages in some cases (pages 59 and 62).  
Dividing a Message  
You can divide a message during recording or playback, so that the  
message is divided into two and the new message number is added to the  
divided message. By dividing a message, you can easily find the point  
you want to play back when you make a long recording such as a meeting.  
You can divide a message until the total number of messages in the folder  
becomes 99.  
Notes  
You need a certain amount of space in the memory to divide a message. For  
more information, see System Limitationson page 62.  
If you divide a message with priority mark(s), priority mark(s) will be added  
to both parts of the divided message.  
GB  
38  
 
While recording or playing back a message, press DIVIDE/  
(bookmark) at the point you want to divide.  
When you press DIVIDE/  
(bookmark) during recording:  
The new message number is added at  
the point you pressed the button, and  
the new message number and  
DIVIDEflashes for 3 seconds. The  
message will be divided into two;  
however, the messages will be  
recorded without a break.  
Message 1 Message 2 Message 3  
A message is divided.  
Recording continues.  
1 Tip  
You can divide a message during recording pause.  
When you press DIVIDE/  
(bookmark) during playback:  
The message is divided into two at the  
point you pressed the button, and the  
new message number and DIVIDE“  
flashes for 3 seconds. The message  
numbers of the following messages  
will increase by one.  
Message 1  
Message 2  
Message 3  
A message is divided.  
The message  
numbers increase.  
Message 1 Message 2 Message 3 Message 4  
To play the divided message  
Press the jog lever up or down (>/.) to display the message number  
as the divided messages have message numbers.  
1 To play the divided messages continuously  
Select ON for CONT in the menu as described in Changing the Settingson  
page 52.  
Continued  
GB  
Download from Www.Somanuals.com. All Manuals Search And Dow3nl9oad.  
Dividing a Message into Two/Combining  
Messages (continued)  
Combining Messages  
You can combine two messages into one.  
Message 1 Message 2 Message 3 Message 4  
Messages are combined  
The message numbers  
decrease.  
Message 1  
Message 2  
Message 3  
Note  
After combining messages, the latter messages alarm setting, priority mark(s)  
and bookmark will be deleted.  
1
2
Press xSTOP to stop the IC recorder.  
Press the jog lever up or down (>/.) to display the  
number of the second of the two messages you want to  
combine.  
3
4
While pressing DIVIDE/  
press ERASE for more than 1 second.  
CMBwill flash for 10 seconds.  
(bookmark),  
Press ERASE while the display is  
flashing.  
The two messages are combined into one  
and the messages will be renumbered as in  
the illustration on this page.  
To cancel erasing  
Press xSTOP before step 4.  
GB  
40  
 
Moving Messages to a Different Folder  
You can move the recorded messages to another folder. When you move a  
message to another folder, the one in the previous folder will be deleted.  
xSTOP  
Jog lever (FOLDER/xB)  
Example: Moving Message 3 in Folder B to Folder C  
1
Play back the message you want to  
move.  
2
Turn the jog lever toward FOLDER  
repeatedly to select the folder that you  
want to move the message into.  
The destination folder and MOVEflash.  
The first and last 5 seconds of the message  
will be played back.  
3
Press the jog lever (xB).  
The message is moved to the destination  
folder. Messages are sorted in order of the  
recorded date and time or the number of the  
priority marks in the folder.  
To cancel moving the message  
Press xSTOP before step 3.  
GB  
Download from Www.Somanuals.com. All Manuals Search And Dow4nl1oad.  
Adding Priority Mark(s)  
Priority Mark Function  
Usually the recorded messages are lined up in the order of recording.  
By adding priority marks (#) to important messages, you can renumber  
the messages in the order of their priority. There are four levels, ###”  
(the most important), ##, #, and no priority mark. You can add  
priority marks both in the stop mode and in the playback mode.  
xSTOP  
Jog lever (xB)  
A-B  
(repeat)/PRIORITY  
Adding Priority Mark(s) in the Stop Mode  
1
Select the message you want to mark.  
2
Press A-B  
more than 1 second.  
(repeat)/PRIORITY for  
#and the message number indication will  
flash on the display window.  
3
Press A-B  
(repeat)/PRIORITY  
repeatedly to select the number of  
priority mark(s) (#) while indications  
are flashing.  
The setting is finished when the priority  
mark(s) (#) light(s) steadily in the display  
window and the messages are renumbered.  
GB  
42  
 
Adding Priority Mark(s) during Playback  
1
Press A-B  
(repeat)/PRIORITY for  
more than 1 second during playback of  
the message you want to mark.  
#and the message number indication will  
flash on the display window while the first  
and last 5 seconds of the message is played  
back 10 times.  
2
Press A-B  
repeatedly to select the number of  
(repeat)/PRIORITY  
priority mark(s) (#).  
3
Press the jog lever (xB) to fix the  
setting.  
The setting is finished and the messages will  
be renumbered.  
e.g. When there are 3  
messages in a folder  
Messages with priority mark(s)  
Messages are sorted in order of the number of priority mark(s) (#) in a  
folder. Messages without a priority mark are moved behind the messages  
with priority mark(s).  
Message 1  
Message 2  
Message 3  
1 Tip  
If there are over 2 messages with the same number of priority marks in a folder,  
these messages are sorted by the recorded date and time (The oldest one comes  
first).  
Note  
You can also add priority mark(s) using the supplied Digital Voice Editor“  
software. But messages are not sorted in order of the number of the priority  
marks unless you sorted by the number of priority marks using the software.  
GB  
Download from Www.Somanuals.com. All Manuals Search And Dow4nl3oad.  
BOther Functions  
Playing Back a Message at a Desired  
Time with an Alarm  
You can sound an alarm and start playback of a selected message at a desired  
time. You can have the message played back at a specified date, once every  
week, or the same time everyday.  
You can also sound the alarm without playing back a message.  
Note  
When the clock is not set or no messages are recorded, you cannot set the alarm.  
Jog lever (>/./xB/MENU)  
1
2
Select the message you want to  
play back.  
For more information about  
selecting the desired message, see  
step 1 and 2 of Playing Back  
Messageson page 18.  
Enter the alarm setting mode.  
1Press the jog lever toward MENU.  
The menu mode will be displayed  
in the display window.  
2Press the jog lever up or down  
(>/.) to select ALARM  
OFF.  
If the alarm has been already set  
to ON, ALARM ONwill be  
displayed.  
GB  
44  
 
3Press the jog lever (xB).  
The alarm setting mode will be  
displayed in the display window.  
4Press the jog lever up or down  
(>/.) to select ON.  
If ONhas already been selected,  
follow the next step.  
5Press the jog lever (xB).  
DATEwill be displayed in the  
display window.  
3
Set the alarm date and time.  
To play back on a desired date  
1Press the jog lever (xB) while  
DATEis displayed.  
The year digits will flash.  
2Press the jog lever up or down  
(>/.) to select the year  
digits and press the jog lever  
(xB).  
The month digits will flash.  
3Set the month and the day in  
sequence, then press the jog lever  
(xB).  
To play back once a week  
Press the jog lever up or down  
(>/.) to select the day of the  
week (SUNfor Sunday to SAT”  
for Saturday). Then press the jog  
lever (xB).  
To play back at the same time every day  
Press the jog lever up or down  
(>/.) to select DAILY. Then  
press the jog lever (xB).  
Continued  
GB  
Download from Www.Somanuals.com. All Manuals Search And Dow4nl5oad.  
Playing Back a Message at a Desired Time with an  
Alarm (continued)  
4
Select the alarm time.  
1Press the jog lever up or down  
(>/.) to select the hour  
digits, and press the jog lever  
(xB).  
The minute digit will flash.  
2Press the jog lever up or down  
(>/.) to select the minute  
digits, and press the jog lever  
(xB).  
5
Press the jog lever up or down  
(>/.) to select the alarm  
sound either from B-PLAY(for  
starting playback after the  
alarm) or B-ONLY(for only the  
alarm).  
6
7
Press the jog lever (xB).  
The setting is finished.  
Press the jog lever toward MENU  
to exit the menu mode.  
The normal display appears.  
,is displayed when the message  
having an alarm setting is selected.  
When the set date and time comes  
At the set time, the alarm will sound for about 10 seconds and the selected  
message will be played back (If you have selected B-ONLYin step 5,  
only the alarm will sound).  
During alarm playback, ALARMwill flash in the display window.  
When the playback ends, the unit will stop automatically at the beginning  
of that message.  
GB  
46  
 
1To listen to the same message again  
Press the jog lever (xB). The same message will be played back from the  
beginning.  
1To cancel the alarm setting before the playback starts  
Press xSTOP while the alarm sound is heard. You can stop the alarm playback  
even when the HOLD function is activated.  
To cancel the alarm setting  
In step 2 on page 44, select OFFand then press the jog lever (xB).  
To check the alarm setting  
Follow steps 1 through 2 on page 44 to display the current alarm date and  
time. Then follow steps 3 to 7 on pages 45 and 46 to change the alarm date  
and time.  
Notes  
If the alarm time comes while another message is being played back with an  
alarm, the playback stops and the new message will be played back.  
If the alarm time comes during recording, the alarm will sound after the recording  
is finished. ,will flash when the alarm time comes.  
If more than one alarm time comes during recording, only the first message will  
be played back.  
When the alarm time comes when the unit is in the menu mode, alarm will sound  
and the menu mode will be cancelled.  
If you divide a message you set the alarm for, alarm setting remains on only the  
first part of the divided message.  
If you combine messages you set the alarm for, the alarm setting of the latter  
message will be cancelled.  
Alarm setting will not be cancelled when the alarm playback finishes.  
GB  
Download from Www.Somanuals.com. All Manuals Search And Dow4nl7oad.  
Turning off the OPE Indicator (LED)  
During recording and playback, the OPE (operation) indicator lights or  
flashes. You can set the OPE indicator to turn off even in operation.  
OPE indicator  
Jog lever (>/./xB/MENU)  
1
Turn the jog lever toward MENU.  
The menu mode will be displayed.  
2
3
Press the jog lever up or down  
(>/.) to select LED ON.  
Press the jog lever (xB).  
The LED setting mode will be  
displayed.  
4
5
Press the jog lever up or down  
(>/.) to select OFF, and  
then press the jog lever (xB).  
The setting is changed.  
Press the jog lever toward MENU  
to exit the menu mode.  
The normal display appears.  
To turn on the OPE indicator  
In step 4 , select ONand then press the jog lever (xB).  
GB  
48  
 
Preventing Accidental Operation —  
HOLD Function  
HOLD switch  
Slide the HOLD switch in the direction of the  
arrow. HOLDwill flash for 3 seconds,  
indicating that all the functions of the buttons are  
locked.  
When the HOLD function is activated during  
stop, all the display will be turned off after  
HOLDflashes.  
To cancel the HOLD function  
Slide the HOLD switch in the opposite direction.  
1 Tip  
Even if the HOLD function is activated, you can stop the alarm playback. To  
stop the alarm or playback, press xSTOP. (You cannot stop usual playback.)  
GB  
Download from Www.Somanuals.com. All Manuals Search And Dow4nl9oad.  
Using an Adding Recording  
At a factory setting, you cannot add a recording (page 33) not to erase the  
message by accidental operation. If you want to add a recording to a  
previously recorded message (page 33) or add an overwrite recording  
(page 34), change the REC-OP setting in the procedures below.  
Jog lever (>/./xB/  
MENU)  
1
2
Turn the jog lever toward MENU.  
The menu mode will be displayed in the display  
window.  
Press the jog lever up or down (>/.)  
to select REC-OP, then press the jog lever  
(xB).  
The adding recording window will be displayed.  
3
4
Press the jog lever up or down (>/.)  
to select ON, then press the jog lever  
(xB).  
The setting is changed.  
Press the jog lever up or down (>/.)  
to select ADDor OVER, then press the  
jog lever (xB).  
ADD: adds a recording to a  
previously recorded message  
OVER: adds an overwrite recording  
5
Press the jog lever toward MENU to exit  
the menu mode.  
The normal display appears.  
To prohibit to add a recording  
In step 3 , select OFFand then press the jog lever (xB).  
GB  
50  
 
Changing the Settings MENU  
You can use the menu to change the IC recorder settings. During playback  
and recording, the menu items to be displayed are limited. Follow the  
procedures below to display the menu and change the settings:  
1 Turn the jog lever toward MENU.  
The menu mode will be displayed.  
2 Press the jog lever up or down (>/.) to select the menu item for  
which you want to change setting.  
3 Press the jog lever (xB).  
The setting mode of the selected menu item will be displayed.  
4 Press the jog lever up or down (>/.) to select the setting that you  
want to set, and then press the jog lever (xB).  
The setting will be changed.  
5 Turn the jog lever toward MENU to exit the menu mode.  
The window will return to normal display.  
Note  
If you do not press any keys for one minute, the menu mode is automatically  
cancelled and the window will return to normal display.  
Continued  
GB  
Download from Www.Somanuals.com. All Manuals Search And Dow5nl1oad.  
Changing the Settings MENU (continued)  
Menu items Settings (*: Initial setting)  
Stop/Play/Rec**  
SENS  
Displays the window to set the microphone  
sensitivity.  
H (high): To record at meetings or in a quiet  
and/or spacious place.  
M*(middle): To record at meetings or in a  
quiet and/or small place.  
OK//OK  
L (low): To record dictation or in a noisy  
place.  
VOR  
Displays the window to set the VOR (Voice  
Operated Recording) function.  
ON:  
The VOR function is activated.  
Recording starts when the unit  
detects sound and stops when no  
sound is heard, eliminating  
OK//OK  
recording from soundless period.  
OFF*:  
The VOR function is disabled.  
Normal recording operation is  
selected.  
DPC  
Displays the window to set the playback  
speed (ON/OFF*). See page 29.  
OK/OK/–  
CONT  
Displays the window to set the continuous  
play.  
ON:  
You can play back all messages  
in a folder continuously.  
OK/OK/–  
OFF*:  
Playback stops at the end of each  
message.  
**Displays whether you can change the setting in each operation mode (Stop:  
stop mode/Play: playback mode/Rec: recording mode): OKshows the  
setting can be changed and “–” shows the setting cannot be changed.  
GB  
52  
 
Menu items Settings (*: Initial setting)  
Stop/Play/Rec**  
EASY-S  
Displays the window to set the easy search  
function.  
ON:  
You can go back for approx. 3  
seconds by pressing the jog lever  
down (.), or advance for  
approx. 10 seconds by pressing  
the jog lever up (>).  
OK//–  
OFF*:  
You can go back or forward the  
messages by pressing the jog  
lever down or up (./>).  
BEEP  
ON*:  
OFF:  
A beep will sound to indicate  
that operation has been accepted.  
OK//–  
No beep sound will be heard  
except for the alarm.  
ALARM  
Displays the window to set the alarm  
(ON/OFF*). See page 44.  
OK//–  
SET DATE Displays the window to set the clock  
(03Y1M1D*). See page 8.  
OK//–  
DISP  
Displays the window to change the  
display mode (COUNT*). See page 26.  
OK/OK/OK  
MODE  
Displays the window to set the  
recording mode:  
ST*:  
You can record with stereo  
sound.  
You can record with better  
sound (monaural sound).  
You can record for longer  
time (monaural sound).  
OK//–  
SP:  
LP:  
LED  
Displays the window to turn on or off  
the OPE indicator during operation  
(ON*/OFF). See page 48.  
OK//–  
REC-OP  
Displays the window to set the adding  
recording mode (ON/OFF*). See page  
50.  
OK//–  
GB  
Download from Www.Somanuals.com. All Manuals Search And Dow5nl3oad.  
Using the Digital Voice Editor“  
Software  
By connecting the IC recorder to your computer with the supplied USB  
cable, you can use the Digital Voice Editorsoftware to do the following:  
Saving the IC recorder messages on your computers hard disk.  
Transferring the PC messages back to the IC recorder.  
Playing or editing the messages on your computer.  
Sending a voice e-mail message using MAPI e-mail software.  
Transcribing your IC recorder message using Dragon  
NaturallySpeaking® speech-recognition software (not supplied).  
For the details, see the supplied Digital Voice Editor 2software  
operating instructions.  
Connection  
To USB  
To USB connector  
of IC recorder  
connector of  
your computer  
Connecting cable  
(supplied)  
GB  
54  
 
System requirements  
Your computer and system software must meet the following minimum  
requirements.  
IBM PC/AT or compatible  
®
CPU: 266MHz Pentium II processor or higher  
RAM: 64MB or more  
Hard disk space: 70MB or more depending on the size and number of  
sound files you store  
CD-ROM drive  
USB port  
Sound board: Sound Blaster 16 compatible  
Display: High color (16 bits) or more and 800 x 480 dots or more  
®
®
OS: Microsoft Windows XP Home Edition/XP Professional/2000  
Professional/Millennium Edition/98/98 Second Edition standard  
®
installation (You cannot use this software with Windows 95 or  
®
Windows NT.)  
Notes  
You cannot use the software with a Macintosh machine.  
A handmade computer, a computer whose operating system is installed or  
upgraded by the user, or a computer with multi-boot operating environment  
are not supported.  
GB  
Download from Www.Somanuals.com. All Manuals Search And Dow5nl5oad.  
BAdditional Information  
Precautions  
On power  
Operate the unit only on 3 V DC. Use two LR 03 (size AAA) alkaline  
batteries.  
On safety  
Do not operate the unit while driving, cycling or operating any  
motorized vehicle.  
On handling  
Do not leave the unit in a location near heat sources, or in a place subject  
to direct sunlight, excessive dust or mechanical shock.  
Should any solid object or liquid fall into the unit, remove the batteries  
and have the unit checked by qualified personnel before operating it any  
further.  
On noise  
Noise may be heard when the unit is placed near an AC power source, a  
fluorescent lamp or a mobile phone during recording or playback.  
Noise may be recorded when an object, such as your finger, etc., rubs or  
scratches the unit during recording.  
On maintenance  
To clean the exterior, use a soft cloth slightly moistened in water. Do not  
use alcohol, benzine or thinner.  
Keep personal credit cards using magnetic coding or spring-wound  
watches, etc., away from the unit to prevent possible damage from the  
magnet used in the speaker.  
If you have any questions or problems concerning your unit, please  
consult your nearest Sony dealer.  
Backup recommendations  
To avoid potential risk of data loss caused by accidental operation or  
malfunction of the IC recorder, we recommend that you save a backup  
copy of your recorded messages on a tape recorder or to a computer,  
etc.  
GB  
56  
 
Troubleshooting  
Before taking the unit for repair, check the following sections. Should any  
problem persist after you have made these checks, consult your nearest  
Sony dealer.  
IC Recorder  
Symptom  
Remedy  
The unit does not  
operate.  
The batteries have been inserted with incorrect  
polarity (page 6).  
The batteries are weak.  
The buttons are locked with the HOLD switch  
(page 49). (If you press any button, HOLD”  
will flash for 3 seconds.)  
No sound comes  
from the speaker.  
The volume is turned down completely.  
Sound comes from  
the speaker even  
when the ear  
receiver is plugged  
in.  
If you plug in the ear receiver not securely  
during playback, the sound may come from  
the speaker. Unplug the ear receiver and then  
insert it securely.  
The OPE indicator  
does not light.  
LED is set to OFF. Display the menu and set  
the LED to ON.  
FULLis displayed  
and you cannot start  
recording.  
The memory is full. Erase some of the  
messages (page 35).  
99 messages have been recorded in the selected  
file. Select another file or erase some of the  
messages (page 35).  
Continued  
GB  
Download from Www.Somanuals.com. All Manuals Search And Dow5nl7oad.  
Troubleshooting (continued)  
Symptom  
Remedy  
You cannot erase a The message or the folder which contains the  
message.  
message is set to Read-onlyin the computer.  
Display the message using Windows Explorer  
and remove the check for Read-onlyunder  
Properties.  
You cannot  
add a recording or an  
overwrite recording.  
The remaining memory is too short. The  
overwritten part will be deleted after the  
overwriting part finishes recording. Therefore,  
you can only overwrite within the remaining  
recording time.  
At a factory setting, REC-OP is set to OFF.  
Display the menu and set the REC-OP to ON  
(page 50) .  
Recording is  
interrupted.  
The advanced VOR function (page 14) is  
activated. Set the VOR to OFF.  
Noise is heard.  
An object, such as your finger, etc., accidentally  
rubbed or scratched the unit during recording  
so that noise was recorded.  
The unit was placed near an AC power source,  
a fluorescent lamp or a mobile phone during  
recording or playback.  
Plug of the connected microphone was dirty  
when recording. Clean the plug.  
The i (headphones) plug is dirty. Clean the  
plug.  
Recording level is  
low.  
SENS (microphone sensitivity) is set to L.  
Display the menu and set SENS to H or M  
(page 52).  
Recording level is  
unstable (when  
recording music, etc.).  
This unit is designed to automatically adjust  
the recording level when recording meetings,  
etc., and is not suitable for music recording.  
Recording is  
If you use a connecting cable without register  
to connect the sound source to the IC recorder,  
sound may be recorded interrupted. Make  
sure to use a registered connecting cable.  
interrupted (when  
recording from an  
external device).  
GB  
58  
 
Symptom  
Remedy  
Playback speed is  
too fast or too slow.  
The playback speed is adjusted in DPC. Slide  
the DPC switch to OFF or display the menu  
and adjust the speed in DPC again (page 29).  
--:--is displayed. You have not set the clock (page 8).  
--Y--M--Dor --:--”•The date of recording will not be displayed if  
is displayed on the  
you recorded the message when the clock was  
REC DATE display. not set.  
You cannot  
combine messages.  
The bookmark is set for the message. Delete  
the bookmark, and then combine messages.  
Messages are not  
Unless you sort messages using the supplied  
sorted in order of the Digital Voice Editorsoftware, messages are  
number of priority  
marks in a folder.  
sorted in the unit the same as the setting in the  
computer. Sort again in the order of the  
number of priority marks in the computer  
using the supplied Digital Voice Editor“  
software.  
The remaining time The unit requires a certain amount of memory  
displayed in the  
display window is  
shorter than that  
displayed in the  
supplied Digital  
Voice Editor“  
for system operation. That amount is  
subtracted from the remaining time, which is  
the reason for the difference.  
software.  
The battery life is  
short.  
The battery life on page 7 is based on playback  
through internal speaker with the medium  
volume level (using Sony alkaline batteries  
LR03(SG)). The battery life may shorten  
depending on the operation of the unit.  
The unit does not  
operate correctly.  
Take out the batteries and insert them again  
(page 6).  
Please note that recorded messages may be erased during service or repair  
work.  
GB  
Download from Www.Somanuals.com. All Manuals Search And Dow5nl9oad.  
Troubleshooting (continued)  
Error Messages of the IC Recorder  
Error message  
Cause/Remedy  
ERR ACCESS“ •The IC recorder failed in memory access.  
Remove and then insert the batteries.  
ERR DATA“  
The file is not supported by the Digital Voice  
Editorsoftware, or the file itself is corrupted.  
FULL”  
The remaining memory of the IC recorder is too  
small. Erase some messages before recording  
(page 35).  
When there are already 99 messages in the  
selected folder or the remaining memory of the  
IC recorder is short, you cannot divide a  
message. Erase some messages before dividing a  
message (page 35).  
LO BATT“  
Batteries are weak. Replace batteries with new  
ones.  
NO DATA“  
The selected folder does not have any messages.  
You cannot set the alarm, etc. because of this.  
NO ERASE”  
You cannot combine messages of different modes.  
PRE SET”  
You set the alarm to play back a message at a date  
and time previously set on another message.  
Change the alarm setting.  
If you do not set date and time, you cannot make  
alarm or time recording setting. To set date and  
time, see page 8.  
SET DATE”  
For the error messages of the Digital Voice Editor, please refer to the  
online Help files.  
GB  
60  
 
If an error message with a number is displayed  
If the following error display appears, please consult your nearest Sony  
dealer.  
Error number Cause  
ERR 01”  
The IC recorder cannot access the memory or cannot  
format the memory.  
ERR 02”  
The IC recorder cannot write (record or erase) the data  
in the memory.  
ERR 03”  
ERR 04”  
ERR 05”  
The IC recorder cannot read the memory.  
The IC recorder cannot load or write the settings.  
An error other than the above occurs.  
GB  
Download from Www.Somanuals.com. All Manuals Search And Dow6nl1oad.  
Troubleshooting (continued)  
System Limitations  
There are some system limitations of the unit. Troubles as mentioned  
below are not malfunctions of the unit.  
Symptom  
Cause/Remedy  
You cannot record  
messages up to the  
maximum recording  
time.  
If you record messages in a mixture of ST, SP  
and LP modes, the recordable time varies from  
the maximum ST mode recording time to the  
maximum LP mode recording time.  
The sum of the number on the counter (elapsed  
recording time) and the remaining recording  
time may be less than the units maximum  
recording time.  
You cannot divide a message in a folder which  
has 99 messages.  
You cannot divide  
a message.  
If you divide or combine messages frequently,  
the unit may become unable to divide a  
message.  
You cannot combine  
messages.  
You cannot combine different recording mode  
(ST/SP/LP) messages.  
If you divide or combine messages frequently,  
the unit may become unable to combine  
messages.  
GB  
62  
 
Specifications  
Recording media  
Built-in flash memory 32MB (ICD-ST20)/16MB  
(ICD-ST10), Stereo/Monaural recording  
ICD-ST20: 85 minutes (ST), 261 minutes (SP), 696  
minutes (LP)  
Recording time  
ICD-ST10: 41 minutes (ST), 125 minutes (SP), 334  
minutes (LP)  
Speaker  
Approx. 28 mm (1 1/8 in.) dia.  
Power output  
Input/Output  
350 mW  
Microphone jack (minijack, stereo)  
input for plug in power, minimum input level  
0.6 mV, 3 kilohms or lower impedance microphone  
Headphones jack (minijack, stereo)  
output for 8 - 300 ohms ear receiver  
USB connector  
Playback speed control  
Power requirements  
+100% to -50% (DPC)  
Two LR03 (size AAA) alkaline batteries: 3 V DC  
Dimensions (w/h/d) (not incl. projecting parts and controls)  
17  
41.5 × 103.6 × 13.3 mm (1 11  
75 g (2.65 oz)  
/
16 × 4 1/8 ×  
/32 in.)  
Mass (incl. batteries)  
Supplied accessories  
Stereo Ear Receiver × 1  
USB Connecting cable × 1  
Application Software (CD-ROM) × 1  
Carring Case x 1  
LR03 (size AAA) alkaline batteries × 1*  
*For the United States model only  
Stereo ear receiver MDR-EX70  
Stereo Headphones MDR-E848LP  
Optional accessories  
Electret condenser microphone ECM-719  
Connecting cable RK-G134/G136 (excluding  
Europe)  
AC power adaptor AC-E30HG  
(For the Peoples Republic of China Model, you  
cannot use the AC power adaptor.)  
Your dealer may not handle some of the above listed optional accessories. Please  
ask the dealer for detailed information.  
Design and specifications are subject to change without notice.  
GB  
Download from Www.Somanuals.com. All Manuals Search And Dow6nl3oad.  
Index to Parts and Controls  
Refer to the pages indicated in parentheses for details.  
Front  
1
2
3
qa  
4
5
6
7
8
9
q;  
qs  
qd  
qf  
qg  
1 Built-in microphone (11, 13)  
2 Built-in microphone (11, 13)  
3 OPE (operation) indicator  
(11, 19)  
4 DIRECTNL (directional)  
switch (13)  
0 Speaker  
qa zREC (record) /REC  
PAUSE button (11, 33)  
qs xSTOP button (12, 20)  
qd Jog lever  
FOLDER/MENU/  
5 ERASE button (35)  
.(review/fast backward)/  
> (cue/fast forward)/  
xB (play/stopenter)  
qf VOL (volume) +/buttons  
(19)  
6 A-B  
button (32, 42)  
7 DIVIDE/ (bookmark)  
button (31, 38)  
(repeat)/PRIORITY  
qg USB connector (54)  
8 Display window (23)  
9 DPC ON/OFF switch (29)  
GB  
64  
 
Rear  
qh  
qj  
qk  
w;  
ql  
qh m (microphone) jack (16)  
qj i (headphones) jack (17, 19)  
qk HOLD switch (28, 49)  
ql DC IN 3V jack (6)  
(For the Peoples Republic of  
China Model, this jack does  
not work.)  
w; Battery compartment (6)  
GB  
Download from Www.Somanuals.com. All Manuals Search And Dow6nl5oad.  
Index  
A
E
A-B repeat .................................... 32  
Easy search ........................... 21, 53  
Erase, bookmark ......................... 31  
Erase, messages ........................... 35  
Error messages ............................ 60  
Error numbers ............................. 61  
External microphone .................. 16  
ACCESSmessage......................  
7
Accidental operation .................. 49  
Add, bookmark ........................... 31  
Add, priority marks ................... 42  
Add, recording ............................ 33  
Advanced VOR .................... 14, 52  
Alarm............................................ 44  
F
Folder .................................... 11, 18  
B
Battery ............................................  
6
H
Beep .............................................. 53  
Bookmark ..................................... 31  
Built-in microphone ............. 11, 13  
Hold ....................................... 28, 49  
L
LED ............................................... 48  
LP mode ........................... 7, 10, 53  
C
Clock setting ..................................  
8
Combine ....................................... 40  
Connecting, computer ............... 54  
Connecting, external  
M
Maximum recording time ......... 10  
Menu............................................. 51  
Message, adding ......................... 33  
Message, erasing ......................... 35  
Message, move ............................ 41  
Message, playing back ............... 18  
Message, recording..................... 10  
Message number .................. 11, 18  
Microphone, built-in .................. 11  
Microphone, connecting ............ 16  
Microphone, external ................. 16  
Microphone sensitivity ....... 13, 52  
Monitoring recording ................. 14  
Move ............................................. 41  
microphone .................................. 16  
Connecting, other device ........... 17  
Continuous playback .......... 21, 52  
Counter display .......................... 27  
Cue ................................................ 21  
D
Digital Voice Editor .................... 54  
Display mode .............................. 26  
Display window ......................... 23  
Divide ........................................... 38  
DPC  
(Digital Pitch Control) .. 20, 29, 52  
O
Overwrite recording ................... 34  
GB  
66  
 
P
Playback ....................................... 18  
Playback pause function ............ 20  
Playback speed .............. 20, 29, 52  
Playing back continuously ........ 21  
Plug in power .............................. 16  
Priority marks ............................. 42  
R
Recorded date/time display ..... 27  
Recording mode .............. 7, 10, 53  
Recording pause function ......... 12  
Remaining battery ........................  
7
Remaining display ...................... 27  
Remaining memory .................... 15  
Repeat play ........................... 22, 32  
Review ................................... 12, 21  
S
Search forward/backward ........ 21  
SP mode ........................... 7, 10, 53  
ST mode ........................... 7, 10, 53  
System limitations ...................... 62  
System requirements .................. 55  
T
Turning off the display .............. 28  
Turning off the indicator ........... 48  
U
USB cable ..................................... 54  
V
Volume control ........................... 19  
VOR ....................................... 14, 52  
GB  
Download from Www.Somanuals.com. All Manuals Search And Dow6nl7oad.  
Printed on 100% recycled  
paper using VOC (Volatile  
Organic Compound)-free  
vegetable oil based ink.  
Sony Corporation  
Printed in Japan  
 

Sharp Air Conditioner AF R120CX User Manual
Sherwood Stereo Receiver R 965 User Manual
Sierra Wireless Network Hardware X HSUPA User Manual
Sole Control Remotes Treadmill TT8 User Manual
Sony Home Theater System XS 6953 User Manual
Sony Satellite TV System SA VE230 User Manual
Sony Speaker System SRS RF80RK User Manual
Sterling Plumbing Product E043800 User Manual
Sunbeam Microwave Oven SMW978 User Manual
Sylvania DVD VCR Combo dv220sl8 User Manual