P/N:7525000093C
For your safety
Digital Photo
Frame
Let’s get the photo
frame ready
Let’s view an image
Try using various functions
Troubleshooting
DPF-X85/X95
Additional information
Operating Instructions
Before operating this unit, please read this manual thoroughly and
retain it for future reference.
Owner’s Record
The model and serial numbers are located at the rear.
Record the serial number in the space provided below. Refer to
these numbers whenever you call upon your Sony dealer
regarding this product.
Model No. DPF-X85/X95
Serial No. ________________________
Product lineup differs by country and region.
© 2010 Sony Corporation
WARNING
Declaration of Conformity
Trade Name:
SONY
To reduce fire or shock hazard, do not
expose the unit to rain or moisture.
Model No.:
Responsible Party: Sony Electronics Inc.
Address:
DPF-X95
16530 Via Esprillo, San Diego,
CA 92127 U.S.A.
858-942-2230
Do not expose the batteries to
excessive heat such as sunshine, fire
or the like.
Telephone No.:
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
CAUTION
(1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
Replace the battery with the specified
type only. Otherwise, fire or injury
may result.
Dispose of used batteries according
to the instructions.
Note:
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules.
For the customers in the U.S.A.
CAUTION
You are cautioned that any changes or modifications
not expressly approved in this manual could void
your authority to operate this equipment.
These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will
not occur in a particular installation. If this equipment
does cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
If you have any questions about this product, you may
call:
Sony Customer Information Services Center
1-800-222-SONY (7669)
The number below is for the FCC related matters
only.
Regulatory Information
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and
receiver.
– Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV
technician for help.
Declaration of Conformity
Trade Name:
SONY
Model No.:
DPF-X85
Responsible Party: Sony Electronics Inc.
Address:
16530 Via Esprillo, San Diego,
CA 92127 U.S.A.
Telephone No.:
858-942-2230
For the State of California, USA
only
Perchlorate Material - special handling may apply,
See
Perchlorate Material: Lithium battery contains
perchlorate.
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
2 GB
Disposal of waste batteries
For the Customer in Europe
This product has been tested and found compliant
with the limits set out in the EMC Directive for using
connection cables shorter than 3 meters (9.8 feet).
(applicable in the European Union
and other European countries with
separate collection systems)
This symbol on the battery or on the
packaging indicates that the battery
provided with this product shall not be
Attention
The electromagnetic fields at the specific frequencies
may influence the picture of this digital photo frame.
treated as household waste. On certain
batteries this symbol might be used in
combination with a chemical symbol.
The chemical symbols for mercury
Notice
If static electricity or electromagnetism causes data
transfer to discontinue midway (fail), restart the
application or disconnect and connect the
communication cable (USB, etc) again.
(Hg) or lead (Pb) are added if the battery contains more
than 0.0005% mercury or 0.004% lead. By ensuring
these batteries are disposed of correctly, you will help
prevent potentially negative consequences for the
environment and human health which could otherwise
be caused by inappropriate waste handling of the
battery. The recycling of the materials will help to
conserve natural resources. In case of products that for
safety, performance or data integrity reasons require a
permanent connection with an incorporated battery, this
battery should be replaced by qualified service staff
only. To ensure that the battery will be treated properly,
hand over the product at end-of-life to the applicable
collection point for the recycling of electrical and
electronic equipment. For all other batteries, please
view the section on how to remove the battery from the
product safely. Hand the battery over to the applicable
collection point for the recycling of waste batteries.
Disposal of Old Electrical & Electronic
Equipment (Applicable in the European
Union and other European countries
with separate collection systems)
This symbol on the product or
on its packaging indicates that
this product shall not be treated
as household waste. Instead it
shall be handed over to the
applicable collection point for
the recycling of electrical and
electronic equipment. By
ensuring this product is disposed
of correctly, you will help
prevent potential negative
consequences for the
For more detailed information about recycling of this
product or battery, please contact your local Civic
Office, your household waste disposal service or the
shop where you purchased the product.
environment and human health, which could otherwise
be caused by inappropriate waste handling of this
product. The recycling of materials will help to conserve
natural resources. For more detailed information about
recycling of this product, please contact your local Civic
Office, your household waste disposal service or the
shop where you purchased the product.
Notice for the customers in the
countries applying EU Directives
The manufacturer of this product is Sony Corporation,
1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. The
Authorized Representative for EMC and product safety
is Sony Deutschland GmbH, Hedelfinger Strasse 61,
70327 Stuttgart, Germany. For any service or guarantee
matters please refer to the addresses given in separate
service or guarantee documents.
3 GB
Notice for users
Read this before using
Program © 2010 Sony Corporation
Documentation © 2010 Sony Corporation
Notes on playback
Connect the AC adaptor to an easily accessible AC
outlet. Should you notice an abnormality in it,
disconnect it from the AC outlet immediately.
All rights reserved. This manual or the software
described herein, in whole or in part, may not be
reproduced, translated or reduced to any machine
readable form without prior written approval from
Sony Corporation.
Notes on copyrights
Duplication, edition, or printing of a CD, TV
programs, copyrighted materials such as pictures or
publications, or any other materials except for your
own recording or creation is limited to private or
domestic use only. Unless you hold copyright or have
permission of copyright holders for the materials to
be duplicated, use of those materials beyond this limit
may infringe the provisions of the copyright law and
be subject to the copyright holders claim for damages.
When using photo images with this digital photo
frame, pay special attention not to infringe the
provisions of the copyright law. Any unauthorized
use or modification of other’s portrait may also
infringe their rights.
IN NO EVENT SHALL SONY CORPORATION BE
LIABLE FOR ANY INCIDENTAL,
CONSEQUENTIAL OR SPECIAL DAMAGES,
WHETHER BASED ON TORT, CONTACT, OR
OTHERWISE, ARISING OUT OF OR IN
CONNECTION WITH THIS MANUAL, THE
SOFTWARE OR OTHER INFORMATION
CONTAINED HEREIN OR THE USE THEREOF.
Sony Corporation reserves the right to make any
modification to this manual or the information
contained herein at any time without notice.
The software described herein may also be governed
by the terms of a separate user license agreement.
For some demonstrations, performances, or exhibits,
photography may be forbidden.
Recording contents are not
guaranteed
Sony shall assume no responsibility for any
accidental or consequential damages or loss of the
recording contents which may be caused by use or
malfunction of the digital photo frame or memory
card.
Any design data such as sample pictures provided in
this software cannot be modified or duplicated except
for the purpose of personal use. Any unauthorized
duplication of this software is prohibited under
copyright law.
Please note that unauthorized duplication or
modification of portraits or copyrighted work could
infringe the rights reserved by rights holders.
Backup recommendations
To avoid potential risk of data loss caused by
accidental operation or malfunction of the digital
photo frame, we recommend that you save a backup
copy of your data.
On the illustrations and screen
shots used in this manual
The illustrations and screen shots used in this
manual are of the DPF-X85 unless noted
otherwise.
The illustrations and screen shots used in this
manual may not be identical to those actually
used or displayed.
Notes on LCD screen
• Do not press against the LCD screen. The screen
may be discolored and that may cause a
malfunction.
• Exposing the LCD screen to direct sunlight for a
long period may cause malfunctions.
• The LCD screen is manufactured using extremely
high-precision technology, so over 99.99% of the
pixels are operational for effective use. However,
there may be some tiny black points and/or bright
points (white, red, blue or green in color) that
constantly appear on the LCD screen. These points
are normal in the manufacturing process and do not
affect the viewing in any way.
• Images may trail across on the LCD screen in a cold
location. This is not a malfunction.
4 GB
Table of Contents
For your safety
Digital photo frame .................................................................................................... 8
Remote control .......................................................................................................... 9
Remote control .............................................................................................. 10
Stand ............................................................................................................. 10
To display the photo frame on the wall .................................................................... 11
Turning the photo frame on ........................................................................... 12
Setting the current time ................................................................................. 14
Sorting images (Filtering) .............................................................................. 19
Specifying the playback device ...................................................................... 20
Changing the settings .................................................................................... 22
Refresh mode ................................................................................................ 23
Continued
5 GB
If trouble occurs .............................................................................................25
Installation ...............................................................................................................27
Cleaning ..................................................................................................................27
Restrictions on duplication ......................................................................................27
6 GB
For your safety
Checking included items
Make sure that the following items are included.
Digital photo frame (1)
Stand (1)
Attaching to the screw hole
,
Remote control (1)
Removing the protective sheet
,
,
AC adaptor (1)
Connecting to the AC power source
Operating Instructions (this manual) (1)
CD-ROM (Digital Photo Frame
Handbook) (1)
Warranty (1)
(In some regions, the warranty is not
The supplied CD-ROM contains the Digital Photo
Frame Handbook that explains operations and setups
of the digital photo frame in detail. To view the
handbook, insert the CD-ROM into the computer
and double-click the Handbook icon. (To display the
handbook, you need Adobe Acrobat Reader. )
supplied.)
7 GB
x Remote control
VIEW MODE buttons
1 (on/standby) button
SLIDE-SHOW (
) button
SINGLE button
CLOCK ( ) button
INDEX (
) button
MENU button
Zoom in ( ) button
Direction (B/b/v/V) buttons
ENTER ( ) button
BACK button
Zoom out ( ) button
MARKING (
) button
IMPORT (
DELETE (
) button
) button
SORT button
SELECT DEVICE button
ROTATE (
) button
About descriptions in this manual
The operations described in this manual are based on remote control operation.
When an operation is performed differently, for example, with the remote control and the
buttons on the photo frame, it will be explained in a tip.
9 GB
Let’s get the photo frame ready
P Notes
• If the remote control stops
working:
Remote control
Replace the battery (CR2025
lithium battery) with a new one.
• When the lithium battery becomes
weak, the operating distance of the
remote control may shorten, or the
remote control may not function
properly. In this case, replace the
battery with a Sony CR2025
lithium battery. Use of another
battery may present a risk of fire or
explosion.
Pull out the protective sheet before use as shown in the
figure.
Protective sheet
Replacing procedures:
.CD-ROM (Handbook) page 9
Using the remote control
Point the top end of the remote control towards the remote sensor on
the photo frame.
P WARNING
Battery may explode if mistreated.
Do not recharge, disassemble or
dispose of in fire.
Stand
z Tips
Screw the stand into the screw hole firmly until the stand
stops turning.
x
When the photo frame is
placed in the portrait orientation
If you set the photo frame with its
operations buttons facing upwards,
the display is also automatically
rotated to the portrait orientation.
x Sony logo
When the photo frame is placed in
the portrait orientation or when you
turn off the power, the Sony logo
doesn't light up.
You can set the photo frame to portrait or landscape orientation by
rotating it without moving the stand.
10 GB
To display the photo frame on the wall
PNotes
• Use screws suitable for the quality
of the material of the wall. The
screws may be damaged,
depending on the type of material
used in the wall. Set the screws in
a pillar or stud in the wall.
• When you want to re-insert the
memory card, remove the photo
frame from the wall, then eject and
re-insert the memory card while
the photo frame is placed on a
stable surface.
• Store the stand in the place
provided when you hang the photo
frame on the wall.
• Connect the DC cable of the AC
adaptor to the photo frame and
hang the photo frame on the wall.
Then connect the AC adaptor to
the wall outlet.
• We take no responsibility for any
accidents or damage caused by
defects of attachment, misuse, or
natural disasters, etc.
1 Prepare screws (not supplied) suitable for the screw
holes on the rear panel.
4mm (3/16 inch)
More than 25mm (1 inch)
4.2mm
(3/16 inch)
8.6mm
(11/32 inch)
Holes for hanging
the unit on the wall
2 Screw the screws (not supplied) into the wall.
Be sure the screws (not supplied) protrude between 2.5 to 3mm
(1/8 inch) from the surface of the wall.
Between
2.5mm to 3mm
(1/8 inch)
3 Hang the photo frame on the wall by fitting the hole on
the rear panel to the screws on the wall.
11 GB
PNotes
Turning the photo frame on
• The socket outlet should be as close
as possible to the unit, and easily
accessible.
• Do not place the photo frame on an
unsteady or tilted surface.
1 Insert the plug of the AC adaptor into the DC IN 5V
jack on the rear of the photo frame.
• Connect the AC adaptor to an easily
accessible wall outlet close by. If
trouble occurs while using the
adaptor, immediately shut off the
power by disconnecting the plug
from the wall outlet.
2 Connect the AC adaptor to the wall outlet.
The photo frame is automatically turned on.
• Do not short the plug of the AC
adaptor with a metal object. Doing
so may cause a malfunction.
• Do not use the AC adaptor placed in
a narrow space, such as between a
wall and furniture.
• Insert the plug of the AC adaptor
firmly, if the connection is loose,
the photo frame may turn off when
it is moved.
• After use, remove the AC adaptor
from the DC IN 5V jack of the
photo frame, and remove the AC
adaptor from the outlet.
To the DC IN 5V
jack
DC plug
• Do not turn the photo frame off or
disconnect the AC adaptor from the
photo frame before the standby
indicator turns red. Doing so may
damage the photo frame.
DC cable
To wall outlet
AC adaptor main
unit
AC plug
• The AC plug may be removed from
the AC adaptor main unit by
pushing the “PUSH” tab. When
using the AC adaptor, however, you
do not have to remove the AC plug.
Make sure to use the AC adaptor
with the AC plug firmly attached. If
the AC plug is removed, slide it into
the AC adaptor main unit until it
clicks into place as illustrated.
• The AC plug shape may differ
depending on the region you
purchase the photo frame.
When the AC plug is removed
Attaching the AC plug
Attach the AC plug to the AC adaptor main unit as follows:
PUSH tab clicks when the
AC plug is slid firmly into
place.
12 GB
Removing the AC plug from the wall outlet
If the AC plug remains inserted in the wall outlet, remove it as
• If handled roughly, the AC plug
may become detached from the AC
adaptor main unit and remain in the
wall outlet. If this occurs, grasp the
AC plug with dry hands as
follows, without using a tool:
illustrated and remove it from the
wall outlet. Do not use a tool. Be
careful not to touch the metal
terminals at the rear of the AC plug.
• Check to see if there is no trouble
with the AC adaptor main unit and
AC plug, and then slide the AC
plug into the AC adaptor main unit
until it clicks into place.
Metal terminals at the rear of the AC plug.
• If there is any problem with the
AC adaptor main unit or AC plug,
consult with your Sony service
facilities for repair.
Operations in an initial state
zTips
x If the photo frame is not
operated
When the photo frame is turned on, the initial display appears.
If the photo frame is not operated for
10 seconds, the demo mode is
displayed.
x Releasing the
demonstration mode
If any other button than the power
button is pressed, the screen returns
to the initial display.
13 GB
Setting the current time
P Tip
The B/b buttons become activated
only when the Clock and calendar
1 Press MENU, and B/b to select the
(ENTER)
(Settings) tab.
v
/V [Date/time Settings]
,
2
Press
v/V to select a value.
Setting complete.
v
/
V
to select [Time]
,
(ENTER).
,
B/b (hour, minute, and second)
,
(ENTER)
3 Press MENU.
In the same window, you can use the same procedures as time
setting to set the following:
Setting items
•Date
•
Date Display Order (Y-M-D/M-D-Y/D-M-Y)
•First day of the week (Sunday/Monday)
•12hr/24hr display (12 hours/24 hours)
14 GB
Let’s view an image
PNote
Inserting a memory card
When using a memory card of the
following types, make sure to insert
it in an appropriate adaptor.
Insert the memory card firmly into the corresponding slot
with its label side facing toward you (when you are facing
the back side of the photo frame).
If you insert it without an adaptor,
you may be unable to remove it. As
shown in the right-most illustration
below, make sure to insert the
following types of memory cards
with inserted in the appropriate
adaptor.
1miniSD /miniSDHC
xD-Picture Card
(Slot A)
1
miniSD/
miniSDHC
adaptor
SD memory Card
(Slot A)
2microSD/microSDHC
“Memory Stick”
(Slot A)
2
microSD/
microSDHC
adaptor
3“Memory Stick Micro”
“M2” adaptor
(standard size)
“Memory Stick Duo”
(Slot B)
Access lamp
3
When you insert a memory card
The images on the memory card are automatically displayed.
“M2” adaptor
(Duo size)
If you switch off the power while they are
being displayed
PNote
If you switch the power back on, the same images continue to be
In Clock and calendar display, the
access lamp does not flash even after
you insert a memory card.
displayed.
If the access lamp does not flash
Reinsert the memory card after checking the label side of the
memory card.
About the A and B slots
If you insert memory cards both into the A and B slots
simultaneously, the photo frame will not work properly.
15 GB
Changing the display
1 Press the button corresponding to view mode you
want to select.
VIEW MODE buttons
PNote
The display changes to selected view mode.
If you do not operate the photo
frame for a certain period of time,
the style indicated by the cursor is
automatically selected.
2 Press B/b/v/V to select a desired style, and then
press
(ENTER).
The view mode screen is displayed.
Displays
Styles
z Tip
Single view, Multi image view, Clock
view, Calendar view, Time Machine,
Random view
Style descriptions:
.CD-ROM (Handbook)
page 16 to page 19
Slideshow
Clock1 to Clock11
About the calendars:
Calendar1 to Calendar3, Lunar
Calendar, Arabic Calendar, Farsi
Calendar
Lunar Calendar, Arabic Calendar,
and Farsi Calendar are displayed
only when the relevant language is
selected with the Language Setting.
Clock and calendar
Entire image, Fit to screen, Entire image
(with Exif), Fit to screen (with Exif)
Index 1 to Index 3
Index
16 GB
4Setting information
About the information displayed
on the LCD screen
Icons Meaning
Protect indication
Associated file indication
(Displayed when there is an
associated file such as a motion file
or a miniature e-mail image file.)
Displays when you have registered
a mark.
5Image number (folder-file number)
This is displayed if the image is DCF
compliant.
If the image does not comply with DCF, its file
name is displayed.
If you named or renamed the file on your
computer and the file name includes characters
other than alphanumeric characters, the file
name may not be able to be displayed properly
on the photo frame. Also, for a file created on a
computer or other device, a maximum of 10
characters from the beginning of the file name
can be displayed.
The following information is displayed.
1Display type (In the Single view mode)
– Entire image
– Fit to screen
– Entire image (with Exif)
– Fit to screen (with Exif)
2Ordinal number of the displayed image/Total
number of images
Input media indication for the displayed image
is shown as follows:
Icons
Meaning
Note
Internal memory
Only alphanumeric characters can be displayed.
“Memory Stick” input
SD Memory Card input
xD-Picture Card input
6Shooting date/time
3Image details
– File format (JPEG(4:4:4), JPEG(4:2:2),
JPEG(4:2:0), RAW)
– Number of pixels (width × height)
– Manufacturer name of image input device
– Model name of image input device
– Shutter speed (e.g.: 1/8)
– Aperture value (e.g.: F2.8)
– Exposure value (e.g.: +0.0EV)
– Rotation information
17 GB
Try using various functions
z Tips
Various functions
x Importing
The number of images to be saved in
the internal memory:
• Resize: approx. 4,000 images
• Original: the number of images
may vary, depending on the
original image file size.
• Importing an image (a memory card b the internal
memory)
• Exporting an image (the internal memory b
a memory card)
• Deleting an image
• Marking an image
x Exporting
Any memory card that is not
recognized by this photo frame is
shown in gray and you cannot select
it.
1 When a desired image is displayed, press MENU and
then B/b to select the
(Editing) tab.
PNotes
x During exporting/deleting
2 Select the desired menu item (Import/Export/Delete/
Avoid doing the following. Doing so
may damage this photo frame,
memory card, or the data:
• Turning off the power
• Removing an memory card
• Inserting another card
Marking), and then press
(ENTER).
3 Press v/V to select [ ... this image]/[... multiple
images]/[... all images], and then press
(“...” stands for each command: “Import”, “Export”, “Delete”,
or “Mark”.)
(ENTER).
x When deleting
[... this image]:
If deletion has started, the deleted
image cannot be recovered even if
you stop deletion.
Press v/V to select the destination, and press
(ENTER).
[... multiple images]:
Press B/b/v/V to select a desired image in the image list, and
then press (ENTER) to add “✔”.
x When marking
• Only marks attached to images on
the internal memory are saved.
Repeat this operation to select multiple images.
• Marks attached to images on a
memory card will be removed
when you turn the power off or
change playback devices.
To clear the selection: Select the image and press
(ENTER). “✔” disappears from the image.
After you finish selecting the images, press MENU and then
select the destination.
[... all images]:
All the images are displayed with “✔”.
Press MENU and then select the destination.
18 GB
4 Press v/V to select [Yes], and press
(ENTER).
zTip
Sorting images (Filtering)
If using the buttons on the photo
frame, press MENU, select the
(Editing) tab with B/b, select [Sort]
1 Press SORT when a desired image is displayed.
2 Select a sort style using v/V and press
with v/V, and press
.
(ENTER).
P Note
During Clock and calendar display,
you cannot select the
tab.
(Editing)
PNotes
x During sorting
Avoid doing the following. Doing so
may damage this unit, memory card,
or the data:
• [Sort by date]: Filters by the shooting date.
• [Sort by folder]: Filters by the folder.
• [Sort by vertical/horizontal]:
• Turning off the power
• Removing an memory card
• Inserting another card
Filters by the image orientation.
• [Sort by mark]: Filters by the mark.
x Sort is automatically
cancelled
• When the playback device is
changed.
• When images on a memory card
are sorted and the memory card is
removed.
3 Press B/b/v/V to select the item you want, and then
press
(ENTER).
To cancel the sort
Press MENU while the sorted images are displayed, select [Exit sort
(show all photos)] and press
(ENTER).
To change the sort style
Press BACK while the sorted images are displayed.
19 GB
Specifying the playback device
z What is “playback
device”?
A memory card or the internal
memory.
Press SELECT DEVICE.
Press v/V to select the playback device, and then press
(ENTER).
P Note
During Clock and calendar display,
you cannot select the
device) tab.
(Select
Adjusting image size and
P Notes
orientation (Zoom in/Zoom out/Rotate)
• Enlarging an image may reduce
the quality depending on the image
size.
• It is not possible to enlarge an
image using the buttons on the
photo frame.
Enlarging/Reducing
Press (zoom in) or (zoom out).
Saving an enlarged or a reduced image (Crop and save)
• When you move the enlarged image with B/b/v/V and press
MENU, the image is saved in the trimmed size.
• You can select the saving method by pressing v/V.
Saving methods: [Save as new image], [Overwrite]*
* JPG and JPEG images only
Rotating
P Note
An enlarged image cannot be
rotated.
Press
Or:
(ROTATE).
1 Press MENU, B/b to select the
(Editing) tab,
(ENTER).
zTip
v/V to select [Rotate], and then press
When displaying the images in the
internal memory, the information
used to rotate the image is retained
even after the power is turned off.
2 Press v/V to select the direction to rotate, and then
press
(ENTER).
•
: Rotates the image 90 degrees clockwise.
•
: Rotates the image 90 degrees counterclockwise.
3 Press v/V to select [OK], and then press
(ENTER).
20 GB
z Tips
Changing the settings of the auto
power on/off function
x During operation
The power is turned off
automatically at the time you set for
[Power-OFF timer].
1 Press MENU, B/b to select the
(Settings) tab.
x During the standby mode
The power is turned on
automatically at the time you set for
[Power-ON timer].
2 Press v/V to select [Auto Power ON/OFF], and press
(ENTER).
3 Press v/V to select [Setup method], and then press
(ENTER). Then, press v/V to select [Simple] or
[Advanced], and then press
.
[Simple]
1Press V to select [Time Setting] ,
2Press v/V to select [Power-ON timer] or [Power-OFF timer]
(ENTER).
3Press v/V to select [Enable] ,
(ENTER).
,
(ENTER).
4 [Auto ON time]/ [Auto OFF time] setting
v/V: Set the time.
AM or PM is displayed when you select [12 hours] on the
time display setting.
5[Auto ON day] / [Auto OFF day] setting
v/V: Add a check mark to select the day on which you want
activate the timer.
Move the cursor to [OK] and press
(ENTER).
[Advanced]
Continued
21 GB
Refresh mode
PNotes
The photo frame refreshes the internal memory automatically to
prevent possible data errors.
• Do not turn the photo frame to
OFF while the internal memory is
being refreshed. It may cause a
malfunction.
• It may take approximately 5
minutes to refresh the internal
memory.
The confirmation screen used for refreshing the internal memory is
displayed automatically when the refresh is needed.
The refresh starts when you select [Yes]. The Refresh also starts
automatically when no operation is attempted for 30 seconds. If you
select [No], the confirmation screen used for refreshing the internal
memory is displayed the next time.
23 GB
Connecting to a computer
P Notes
• Use a B-Type USB cable.*
1 Connect the AC adaptor to the photo frame, and to
*
When you use a commercially-
available USB cable, use a
USB cable with a B-type plug
(for the USB B connector of
this unit, frame-side connector
type) shorter than 3 meters.
the AC power source.
2 Connect the computer and photo frame with a
commercially available USB cable.
• If multiple USB devices are
connected to a computer or if a
hub is used, a problem may occur.
In such a case, simplify the
connection.
3 Turn the photo frame on.
4 Operate the computer to exchange images with the
internal memory of the photo frame.
• You cannot operate the photo
frame from another USB device
being used simultaneously.
• Do not disconnect the USB cable
during data communication.
• Operation with all computers that
satisfy the recommended system
requirements is not guaranteed.
• The photo frame has been
demonstrated as operable when
connected to a computer and a
Sony digital photo printer. When
other devices are connected to the
photo frame, these devices may
not recognize the internal memory
of photo frame.
To USB B
connector
Computer
To USB connector
x Windows
Recommended OS: Microsoft Windows 7/Windows Vista SP2 /
Windows XP SP3
Port: USB port
x Macintosh
Recommended OS: Mac OS X (v10.4 or later)
Port: USB port
24 GB
Troubleshooting
If an error message appears
Error message
Meaning/Solutions
Cannot delete a protected file.
• To delete a protected file, cancel the protection on your
digital camera or computer.
Memory card is protected. Remove • The memory card is write-protected. Slide the write-
protection then try again.
protect switch to the enable position. (.Digital Photo
Frame Handbook, page 45)
Error reading the Memory Stick. / • For a memory card:
Error reading the SD Memory
Card. / Error reading the xD-
Picture Card./Error reading the
iternal memory.
An error has occurred. Check that the memory card is
inserted correctly. If this error message is displayed
frequently, check the status of the memory card with a
device other than the photo frame.
Write error on the Memory Stick. / • For the internal memory:
/ Write error on the SD Memory
Card. / Write error on the xD-
Picture Card./ Write error on the
internal memory.
Initialize the internal memory.
Note
When you initialize the internal memory, please note that all the
image files imported to the internal memory are deleted.
Memory card format not supported. • For a memory card, use your digital camera or other device
to format the memory card.
Note
When you initialize the memory card, all the files on the memory card
will be deleted.
If trouble occurs
Symptom
Check item
Cause/Solutions
Some images are
not displayed.
• Are the images displayed in c If the image is displayed in the index view
the index view?
• Does the mark displayed
below appear in the index
view?
but cannot be displayed as single image,
the image file may be damaged even
though its thumbnail preview data is fine.
c A file that is not compatible with DCF
may not be able to be displayed with the
photo frame, even if it can be displayed
with a computer.
c If a mark is displayed, the thumbnail data
or image itself cannot be opened.
• Are there more than 9,999
images in the memory card?
c The photo frame can play, save, delete, or
otherwise handle up to 9,999 image files.
Continued
25 GB
Symptom
Check item
Cause/Solutions
Some images are
not displayed.
• Did you rename the file with c If you named or renamed the file on your
a computer or other device?
computer and the file name includes
characters other than alphanumeric
characters, the image may not be able to
be displayed on the photo frame.
• Is there a folder with more
than 8 levels in its hierarchy
on the memory card?
c The photo frame cannot display images
saved in a folder that is more than 8 levels
deep.
Cannot save an
image.
• Did you save images from a c If you do not make a folder, you can only
computer to the internal
memory without making a
folder in the internal
memory?
save up to 512 images. In addition, the
number of images may be reduced
depending on the file name length or
character type. When you save images in
the internal memory from a computer, be
sure to make a folder in the internal
memory and save the images in this
folder.
Cannot delete an
image.
• Is the memory card write-
protected? Or is the write-
protect switch locked?
c Use the device you are using to cancel
write-protection and try deleting again.
c Slide the write-protect switch to the
enable position.
• Is this image protected?
c Check the image information from the
c An image with a
mark is set to “Read
Only”. You cannot delete it on the photo
frame.
Nothing happens
even if you operate
the photo frame.
c Push the reset switch on the back of the
photo frame using a long, thin object such
—
c Turn off and then on the power.
Nothing happens
even if you operate
the remote control.
• Is the battery inserted in the c Replace the battery. (.Digital Photo
remote control properly?
Frame Handbook, page 9)
c Insert a battery in the proper orientation.
(.Digital Photo Frame Handbook,
page 9)
c Point the top end of the remote control
towards the remote sensor on the photo
frame.
—
c Remove any obstruction between the
remote control and the remote sensor.
• Is there a protective sheet
inserted?
c Remove the protective sheet.
26 GB
Additional information
On transport
Precautions
When you transport the photo frame, remove the
memory card, AC adaptor, and connected cables
from the photo frame and put the photo frame and
its peripherals in the original box with the
protective packaging.
Installation
• Avoid placing the photo frame in a location
subject to:
– vibration
If you no longer have the original box and
packing parts, use similar packing material so that
the photo frame will not be damaged while being
transported.
– humidity
– excessive dust
– direct sunlight
Cleaning
– extremely high or low temperatures
• Do not use electrical equipment near the photo
frame. The photo frame will not work properly
in electromagnetic fields.
If the photo frame is very dirty:
• For cleaning the LCD screen
Do not use water or any type of detergent.
Wipe the LCD screen gently with a soft dry
cloth.
• For cleaning the exterior surface other than the
LCD screen
Wipe the exterior surface lightly with a soft
cloth slightly moistened with water or tepid
water, and then wipe it with a dry cloth. Do not
use any type of solvent, such as alcohol or
benzine, which may damage the finish.
• Do not place heavy objects on the photo frame.
On the AC adaptor
• Even if your photo frame is turned off, AC
power (house current) is still supplied to it
while it is connected to the wall outlet via the
AC adaptor.
• Be sure to use the AC adaptor supplied with the
photo frame. Do not use other AC adaptors, as
this may cause a malfunction.
• Do not use the supplied AC adaptor for other
devices.
• Do not use an electrical transformer (travel
converter), as this may cause overheating or a
malfunction.
• In case the cord of the AC adaptor is damaged,
do not use it any longer, as this may be
dangerous.
Restrictions on duplication
TV programs, films, video tapes, portraits of other
people, or other materials may be copyrighted.
Unauthorized use of such materials may infringe
the provisions of the copyright law.
On moisture condensation
Disposing of the photo frame
If the photo frame is brought directly from a cold
location to a warm location or placed in an
extremely warm or humid room, moisture may
condense inside the unit. In such cases the photo
frame will probably not work properly and may
even develop a fault if you persist in using it. If
moisture condensation occurs, unplug the AC
adaptor of the photo frame and do not use the
photo frame for at least one hour.
Even if you perform [Format internal memory],
the data in the internal memory may not be erased
completely. When you dispose of the photo
frame, we recommend that you physically destroy
the photo frame.
27 GB
File system
FAT12/16/32
Image file name
DCF format, 256 characters within 8th
Specifications
x Photo frame
LCD screen
hierarchy
Maximum number of files that can be
handled
LCD panel:
DPF-X85: 20cm/8.0-inch,
TFT active matrix
DPF-X95: 23cm/9.0-inch,
TFT active matrix
Total number of dots:
DPF-X85/X95: 1,152,000
(800 × 3(RGB) × 480) dots
9,999 files for a memory card
Internal memory capacity*4
2 GB
(Approx. 4,000 images*5 can be saved.)
Power requirements
DC IN jack, DC 5V
Power consumption
Effective display area
Display aspect ratio: 16:10
LCD screen area:
Model
in operation mode including the
AC adaptor
DPF-X85: 18.7cm/7.3-inch
DPF-X95: 21cm/8.3-inch
Total number of dots:
DPF-X85: 1,012,464
(712 × 3(RGB) × 474) dots
DPF-X95: 1,025,304
DPF-X85/X95 at the maximum load
normal mode*
8.6 W
6.85 W
* The definition of the normal mode is a status which
allows the performance of a slideshow using
images stored in the internal memory with the
default settings without inserting a memory card or
connecting an external device.
(718 × 3(RGB) × 476) dots
LCD backlight life
Operating temperature
20,000 hours
(before brightness of the backlight is reduced
to half)
5 °C to 35 °C (41 °F to 95 °F)
Input/Output connectors
USB connector (TypeB, Hi-Speed USB)
Slots
“Memory Stick PRO” (Standard/Duo)/
SD memory card/MMC/
xD-Picture Card slot
Compatible image file formats
JPEG: DCF 2.0 compatible, Exif 2.21
compatible, JFIF*1
RAW (preview only*2): SRF, SR2, ARW
(2.0 or lower version)
(Some image file formats are not
compatible.)
Maximum number of pixels that can be
displayed
8,000 (H) × 6,000 (V) dots *3
28 GB
Dimensions
x AC adaptor
DPF-X85:
[With the stand spread out]
Power requirements
- 100 V to 240 V, 50/60 Hz
0.3 A
Approx. 234.1 × 163.8 × 127 mm
(9 1/4 × 6 1/2 × 5 inches)
(width/height/depth)
[When the photo frame is hanging on the
wall]:
Approx. 234.1 × 163.8 × 41.2 mm
(9 1/4 × 6 1/2 × 1 5/8 inches)
(width/height/depth)
Rated output voltage
5V 2 A
Dimensions
Approx. 45 × 72 × 50 mm
(1 13/16 × 2 7/8 × 2 inches)
(width/height/depth)
(excluding the protruding parts)
DPF-X95:
Mass
[With the stand spread out]
Approx. 263.2 × 181 × 142 mm
(10 3/8 × 7 1/4 × 5 5/8 inches)
(width/height/depth)
Approx. 110 g (4 oz)
See the label of AC adaptor for more details.
Design and specifications are subject to change
without notice.
[When the photo frame is hanging on the
wall]:
Approx. 263.2 × 181 × 41.2 mm
(10 3/8 × 7 1/4 × 1 5/8 inches)
(width/height/depth)
*1: Baseline JPEG with 4:4:4, 4:2:2, or 4:2:0 format
*2: RAW files are displayed as thumbnail preview.
*3: 17 bits or more are required both vertically and
horizontally. An image with an aspect ratio of 20:1 or
more may not be displayed properly. Even if the
aspect ratio is less than 20:1, display problem may
occur in thumbnails, slideshow or other occasions.
*4: The capacity is calculated as 1 MB is equivalent to
1,000,000 bytes. The actual capacity is reduced as
files for management and applications are included.
Approximately 1.9 GB can be used for your actual
operation.
Mass
DPF-X85: Approx. 740 g (26.1 oz)
DPF-X95: Approx. 845 g (30 oz)
(excluding the AC adaptor)
Included accessories
*5: Approximate number is shown when the images
taken by 2,000,000 pixels equivalent camera are
saved. The value may vary depending on the shooting
condition.
Customer support home page
The latest support information is available at the
following home page address:
29 GB
On trademarks and copyrights
•
, Cyber-shot,
, “Memory
Stick”,
, “Memory Stick Duo”,
, “MagicGate Memory
Stick”, “Memory Stick PRO”,
, “Memory Stick PRO
Duo”,
, “Memory Stick
PRO-HG Duo”,
,
“Memory Stick Micro”,
, “Memory Stick-ROM”,
“MagicGate”, and
,
,
are
trademarks or registered trademarks of Sony
Corporation.
• Microsoft, Windows, and Windows Vista are
registered trademarks of Microsoft Corporation
in the United States and/or other countries.
• Macintosh and Mac OS are registered
trademarks of Apple Inc.. in the United States
and/or other countries.
•
or xD-Picture Card™ is a trademark of
FUJIFILM Corporation.
• The SD logo is a trademark.
• The SDHC logo is a trademark.
• Contains iTypeTM and fonts from Monotype
Imaging Inc.
iTypeTM is a trademark of Monotype Imaging
Inc.
• This software is based in part on the work of
the Independent JPEG Group.
• Libtiff
Copyright © 1988 - 1997 Sam Leffler
Copyright © 1991 - 1997 Silicon Graphics, Inc.
• All other companies and product names
mentioned herein may be the trademarks or
registered trademarks of their respective
companies. Furthermore, “™” and “®” are not
mentioned in each case in this manual.
30 GB
memo
31 GB
Printed using VOC (Volatile Organic
Compound)-free vegetable oil based ink.
Sony Corporation Printed in China
|