Sony Clock Radio ICFCD3iPSIL User Manual

— Consult the dealer or an experienced radio/TV  
technician for help.  
Section for iPod  
DC out: 5V  
4-270-865-12(1)  
Do not leave the unit in a location near a heat  
source such as a radiator or airduct, or in a  
place subject to direct sunlight, excessive dust,  
mechanical vibration, or shock.  
Allow adequate air circulation to prevent  
internal heat build-up. Do not place the unit on  
a surface (a rug, a blanket, etc.) or near  
materials (a curtain) which might block the  
ventilation holes.  
Should any solid object or liquid fall into the unit,  
unplug the unit and have it checked by qualified  
personnel before operating it any further.  
To clean the casing, use a soft cloth dampened  
with a mild detergent solution.  
Never touch the wire of the external FM  
antenna during a thunderstorm. Furthermore,  
immediately disconnect the AC power cord  
from the radio.  
If the time in the display is  
incorrect after the battery is  
changed (Reset)  
Owners Record  
e model number and the serial number are located on the  
bottom.  
Record the serial number in the space provided below. Refer  
to them whenever you call upon your Sony dealer regarding  
this product.  
Connecting the  
antenna  
MAX: 500mA (AC only)  
WARNING  
Replace the battery for the clock backup with a  
Sony CR2032 lithium battery, and the battery  
for the remote commander with a Sony CR2025  
lithium battery. Use of another battery may  
present a risk of fire or explosion.  
Battery may explode if mistreated. Do not  
recharge, disassemble or dispose of in fire.  
Do not expose the battery to excessive heat  
such as direct sunlight, fire or the like.  
Dispose of used battery promptly. Keep away  
from children.  
Radio section  
Frequency range  
Press the Reset button with a pointed device. The  
Reset button is in the small hole located in the  
battery compartment.  
To connect the AM loop  
antenna  
Model No. ICF-CD3iP  
Band  
FM  
Frequency  
Channel step  
FM/AM CD  
Clock Radio  
87.5 – 108 MHz 0.1 MHz  
530 – 1 710 kHz 10 kHz  
Serial No.________________________________  
The shape and the length of the antenna is  
designed to receive AM signals. Do not dismantle  
or roll up the antenna.  
Note  
When you replace the battery, do not disconnect  
the plug from the AC outlet. Otherwise, the  
calendar, current time, alarm and station presets  
will be erased.  
AM  
For customers who purchased this product in the  
USA  
General  
Speaker  
1 Remove only the loop part from the  
plastic stand.  
2 Set up the AM loop antenna.  
Please register this product on line at  
Proper registration will enable us to send you  
periodic updates about new products, services, and  
other important announcements. Registering your  
product will also allow us to contact you in the  
unlikely event that the product needs adjustment  
or modification. ank you.  
Approx. 3.8 cm (1 1/2 inches) dia. 20 Ω  
Battery Warning  
Input  
If the unit is to be left unplugged for a long time,  
remove the battery to avoid undue battery  
discharge and damage to the unit from battery  
leakage.  
Important Safety  
Instructions  
Operating Instructions  
AUDIO IN jack (ø 3.5 mm stereo minijack)  
Power output  
1 W + 1 W (at 10% harmonic distortion)  
Power requirements  
120 V AC, 60 Hz  
For clock back up: 3V DC, one CR2032 battery  
1) Read these instructions.  
ICF-CD3iP  
WARNING  
2) Keep these instructions.  
NOTES ON LITHIUM BATTERY  
There is a danger of explosion if the battery is  
WARNING  
To reduce the risk of fire or electric shock, do  
not expose this apparatus to rain or  
moisture.  
To reduce the risk of fire, do not cover the  
ventilation opening of the apparatus with  
newspapers, tablecloths, curtains, etc. Do not  
place the naked flame sources such as lighted  
candles on the apparatus.  
To reduce the risk of fire or electric shock, do not  
expose this apparatus to dripping or splashing,  
and do not place objects filled with liquids, such  
as vases, on the apparatus.  
3) Heed all warnings.  
Wipe the battery with a dry cloth to assure a  
good contact.  
incorrectly replaced.  
4) Follow all instructions.  
Replace only with the same or equivalent type  
recommended by the equipment manufacturer.  
5) Do not use this apparatus near water.  
6) Clean only with dry cloth.  
Dimensions  
Be sure to observe the correct polarity when  
installing the battery.  
3 Connect the cords to the AM antenna  
Approx. 145 × 156.8 × 115.8 mm (w/h/d)  
(5 3/4 × 6 1/4 × 4 5/8 inches) not including  
projecting parts and controls  
The CD, iPod & iPhone and  
VOLUME + buttons have a tactile dot.  
terminals.  
7) Do not block any ventilation openings.  
Install in accordance with the manufacturers  
instructions.  
Do not hold the battery with metallic tweezers,  
otherwise a short-circuit may occur.  
If the battery compartment lid comes off  
The battery compartment lid is designed to come  
off when opened with excessive force. To put it  
back on, see the illustration.  
Cord (A) or cord (B) can be connected to  
either terminal.  
Mass  
If you have any questions or problems concerning  
your unit, please consult your nearest Sony dealer.  
Insert the cord while  
pushing down the  
terminal clamp.  
8) Do not install near any heat sources such as  
radiators, heat registers, stoves, or other  
apparatus (including amplifiers) that produce  
heat.  
9) Do not defeat the safety purpose of the  
polarized or grounding-type plug. A polarized  
plug has two blades with one wider than the  
other. A grounding type plug has two blades  
and a third grounding prong. The wide blade  
or the third prong are provided for your safety.  
If the provided plug does not fit into your  
outlet, consult an electrician for replacement  
of the obsolete outlet.  
10)Protect the power cord from being walked on  
or pinched particularly at plugs, convenience  
receptacles, and the point where they exit  
from the apparatus.  
11)Only use attachments/accessories specified by  
the manufacturer.  
Approx. 1.3 kg (2 lb 13 oz) including power  
supply unit  
Supplied accessories  
Remote commander (1)  
AM loop antenna (1)  
Audio connecting cable (1)  
Universal Dock Adapter for iPhone (1)  
Universal Dock Adapter for iPhone 3GS &  
iPhone 3G (1)  
Universal Dock Adapter for iPhone 4S & iPhone 4  
(1)  
Troubleshooting  
Only insert up  
to here.  
Should any problem persist after you have made  
the following checks, consult your nearest Sony  
dealer.  
B
A
Do not install the appliance in a confined space,  
such as a bookcase or built-in cabinet.  
Dream Machine is a trademark of Sony Corporation.  
The clock flashes “AM 12:00” due to a power  
interruption.  
The battery is low. Replace the battery. Remove  
the old battery and install a new one.  
The CD, radio, iPod or buzzer alarm does not  
sound at the preset alarm time.  
Check that ALARM Aor ALARM B” is  
properly displayed.  
Do not expose the batteries (battery pack or  
batteries installed) to excessive heat such as  
sunshine, fire or the like for a long time.  
CR2032  
1 Insert the left hook of the lid into the left  
hole in the unit.  
2 Insert the right hook into the right hole.  
3 Confirm the lid is securely attached.  
Design and specifications are subject to change  
without notice.  
4 Make sure the AM loop antenna is  
As the main plug is used to disconnect the unit  
from the mains, connect the unit to an easily  
accessible AC outlet. Should you notice an  
abnormality in the unit, disconnect the main plug  
from the AC outlet immediately.  
connected firmly by pulling softly.  
Compatible iPod/iPhone  
models  
Adjusting the AM loop antenna  
Find a place and an orientation that provide good  
reception.  
Compatible iPod/iPhone models are as follows.  
Update your iPod/iPhone to use the latest  
software before you use it.  
CR2025  
The CD, radio or alarm of iPod is activated  
but no sound comes on at the preset alarm  
time.  
You are cautioned that any changes or  
modifications not expressly approved in this  
manual could void your authority to operate this  
equipment.  
Do not place the AM loop antenna near the  
unit or other AV equipment, as noise may  
result.  
12)Use only with the cart, stand, tripod, bracket,  
or table specified by the manufacturer, or sold  
with the apparatus. When a cart is used, use  
caution when moving the cart/apparatus  
combination to avoid injury from tip-over.  
No Power No Problem is a trademark of Sony Corporation.  
Has VOLUME been adjusted?  
iPod touch (4th generation)  
iPod touch (3rd generation)  
iPod touch (2nd generation)  
iPod touch (1st generation)  
iPod nano (6th generation)*  
iPod nano (5th generation)  
iPod nano (4th generation)  
iPod nano (3rd generation)  
iPod nano (2nd generation)  
iPod nano (1st generation)  
iPod with video  
Tip  
The CD player does not operate.  
©2008 Sony Corporation  
Printed in China  
Adjust the direction of the AM loop antenna for  
best AM broadcast sound.  
Did you close the CD compartment lid?  
Did you insert the disc correctly?  
The disc should be inserted with the label side  
up.  
Dusty or defective disc — Clean the disc with  
an optional cleaning cloth. Wipe the disc from  
the center out.  
Take out the CD and leave the CD  
compartment open for about an hour to allow  
condensation to evaporate.  
About the backup  
battery  
13)Unplug this apparatus during lightning storms  
or when unused for long periods of time.  
14)Refer all servicing to qualified service  
personnel. Servicing is required when the  
apparatus has been damaged in any way, such  
as power-supply cord or plug is damaged,  
liquid has been spilled or objects have fallen  
into the apparatus, the apparatus has been  
exposed to rain or moisture, does not operate  
normally, or has been dropped.  
For the state of california, USA only  
Perchlorate Material –special handling may apply, See  
Perchlorate Material: Lithium battery contains  
perchlorate  
CAUTION  
Preparing the remote  
commander  
The use of optical instruments with this  
product will increase eye hazard.  
To keep good time, this unit contains one CR2032  
battery inside of the unit as a backup power  
source.  
Danger of explosion if battery is incorrectly  
replaced. Replace only with the same or  
equivalent type.  
Before using the card remote commander for the  
first time, remove the insulation film. (See Fig.  
-)  
iPod with color display  
iPod with click wheel  
iPod classic  
The battery keeps the clock operating in the event  
of a power interruption.  
There is no sound from the iPod.  
Make sure the iPod is securely connected.  
Adjust the VOLUME.  
iPod mini  
When to replace the battery  
Knowing when to replace the  
battery  
iPhone 4S  
With normal use, the battery (CR2025) should  
last for about six months. When the remote  
commander no longer operates the unit, replace  
the battery with a new one. (See Fig. -)  
iPhone 4  
The iPod cannot be operated with this unit.  
Make sure the iPod is securely connected.  
iPhone 3GS  
When the battery becomes weak, “” appears in  
the display.  
is symbol is intended to alert the user  
to the presence of uninsulated “dangerous  
voltage” within the product’s enclosure that  
may be of sufficient magnitude to constitute  
a risk of electric shock to persons.  
iPhone 3G  
The iPod cannot be charged.  
Make sure the iPod is securely connected.  
iPhone  
If a power interruption occurs while the battery is  
weak, the current time and alarm will be erased.  
Replace the battery with a Sony CR2032 lithium  
battery. Use of another battery may cause a fire or  
explosion.  
* The iPod nano (6th generation) cannot be  
controlled by the remote when the command of  
“MENU,” “,” “,” and “ENTER” is pressed.  
Notes  
When daylight saving time begins, the clock  
does not employ the daylight saving time  
automatically.  
Do not charge the battery.  
is symbol is intended to alert the user to  
the presence of important operating and  
maintenance (servicing) instructions in the  
literature accompanying the appliance.  
When you are not going to use the remote  
commander for a long time, remove the battery  
to avoid any damage caused by leakage and  
corrosion.  
Notes  
Features  
Make sure the clock is set correctly.  
Note  
In these Operating Instructions, “iPod” is used  
as a general reference to functions of iPod on  
the iPod and iPhone, unless otherwise specified  
by the text or illustrations.  
The connector of the unit is for sole use for  
iPod. When you use devices that do not match  
with the connector, connect to the AUDIO IN  
terminal of this unit with the supplied audio  
connecting cable.  
Press and hold CLOCK and BRIGHTNESS/  
TIME ZONE simultaneously for at least two  
seconds to employ the DST function.  
Brightness control (High/Mid/Low)  
Supplied audio cable for digital music players  
Built-in CD player with CD-R/RW playback  
function  
If AM 12:00” flashes in the display when the unit  
is connected to AC outlet for the first time, the  
battery may be weak. In this case, consult your  
Sony dealer.  
CLASS1M INVISIBLE LASER RADIATION  
WHEN OPEN DO NOT VIEW DIRECTRY  
WITH OPTICAL INSTRUMENTS.  
Use of controls or adjustments or performance of  
procedures other than those specified herein may  
result in hazardous radiation exposure.  
FM/AM 2-band digital tuner  
Replacing the battery  
30 Station Presets (20 FM, 10 AM)  
Automatic Time/Daylight Saving Time Setting  
No Power No Problem alarm system to keep  
the clock and the alarm operating during a  
power interruption with a CR2032 battery  
installed  
Specifications  
Audio power specifications  
POWER OUTPUT AND TOTAL HARMONIC  
DISTORTION  
With 20-ohm loads, both channels driven from  
150-10,000 kHz; rated 0.7W per channel-  
minimum RMS, with no more than 10% total  
harmonic distortion.  
CD player section  
System  
Compact disc digital audio system  
Laser diode properties  
1 Open the CD compartment lid. (See Fig.  
-)  
INFORMATION  
Sony cannot accept responsibility in the event  
that data recorded to iPod is lost or damaged  
when using an iPod connected to this unit.  
2 Keep the AC plug connected to the AC  
outlet and use a screwdriver to remove  
the screw that secures the battery holder  
at the bottom of the unit. (See Fig. -  
)  
3 Push the exhausted battery out from the  
bottom of the battery holder and insert a  
new battery with the side facing up.  
(See Fig. -)  
4 Insert the battery holder back into the  
unit and secure it with the screw. (See  
Fig. -)  
5 Press CD, iPod&iPhone, RADIO BAND,  
AUDIO IN or SNOOZE/DATE/SLEEP  
OFF to turn “” off in the display.  
This equipment has been tested and found to  
comply with the limits for a Class B digital device,  
pursuant to Part 15 of the FCC Rules. These limits  
are designed to provide reasonable protection  
against harmful interference in a residential  
installation. This equipment generates, uses and  
can radiate radio frequency energy and, if not  
installed and used in accordance with the  
Extendable Snooze time from 10 to 60 min  
Precautions  
Play the unit on the power source specified in  
“Specifications.  
instructions, may cause harmful interference to  
radio communications. However, there is no  
guarantee that interference will not occur in a  
particular installation. If this equipment does  
cause harmful interference to radio or television  
reception, which can be determined by turning  
the equipment off and on, the user is encouraged  
to try to correct the interference by one or more  
To disconnect the AC power cord (mains lead),  
pull it out by the plug, not the cord.  
The unit is not disconnected from the AC  
power source (mains) as long as it is connected  
to the wall outlet, even if the player itself has  
been turned off.  
Emission duration: Continuous  
Laser output: Less than 44.6 µW(This output is  
the value measurement at a distance of 200 mm  
from the objective lens surface on the optical  
pick-up block with 7 mm aperture.)  
Number of channels  
The nameplate and important information  
concerning safety are located on the bottom  
exterior.  
Since a strong magnet is used for the speaker,  
keep personal credit cards using magnetic coding  
or spring-wound watches away from the unit to  
prevent possible damage from the magnet.  
2
of the following measures:  
— Reorient or relocate the receiving  
antenna.  
Frequency response  
20 - 20 000 Hz +1/–2 dB  
Wow and flutter  
— Increase the separation between the equipment  
and receiver.  
Below measurable limit  
— Connect the equipment into an outlet on a circuit  
different from that to which the receiver is  
connected.  
This unit includes a preinstalled Sony Lithium battery (CR2032) as back-up power source for the clock, which is preset  
to EST (Eastern Standard Time) at the factory. And this battery is considered part of the product.  
 

Sonicare Electric Toothbrush HX6731 02 User Manual
Sony Camera Accessories SNCACA2 User Manual
Sony Cassette Player CFD E55L User Manual
Sony Digital Camera DCR SX60 User Manual
Sony Speaker SA W303 User Manual
SPX Cooling Technologies Humidifier Atmospheric Heat Vaporization Systems User Manual
Stow Water Pump CP 20H User Manual
Strong Pools and Spas Hot Tub Vienna User Manual
Sunbeam Coffeemaker EM5900 User Manual
Tamron Camera Lens AF015C700 User Manual