KD-32NX200U
KD-36NX200U
Checking the supplied
accessories
Connecting the TV
1
2
3
VIDEO
/
TV
/
Connecting an aerial only
STIC
K
L
A
IT
IG
D
Thank you for choosing this Sony
Trinitron Television.
4
7
GUIDE
MODE
This step by step guide will help you to:
Insert batteries into the remote control.
Connect the aerial to your TV.
Connect a video cassette recorder (VCR) to your TV.
Switch on your TV.
RF Loopthrough cable
INDEX
(SMARTLINK)
3
s 3
VCR
Existing
2
DVD
1
DIGITAL
OPTICAL OUTPUT
ANALOGUE
aerial lead
.
.
.
5
V
2
0
0
m
A
R
/
D
/
D
/
D
L
/
G
/
S
/
I
RF loopthrough
cable (supplied)
PROG
MENU
Connect your existing aerial lead to the digital socket marked
the TV as shown.
on the rear of
1.
2.
Tune your TV.
Connect the supplied RF loopthrough cable from the socket marked
analogue socket marked
to the
View TV programmes.
Batteries
.
Connecting an aerial and VCR
Remote Control
Inserting batteries into
the remote control
RF lead
(not supplied)
Scart lead
(not supplied)
VCR
Connect your existing aerial lead to the digital socket marked
TV as shown.
on the rear of the
1.
2.
3.
4.
1
Connect the supplied RF loopthrough cable from the lower socket marked
the TV to the RF IN socket on your VCR.
on
Place a coin in the slot at the
bottom of the remote control.
Turn anti clockwise to release
the battery compartment.
Connect a lead from the RF OUT socket of your VCR to the analogue socket
marked on the TV.
2
Insert the batteries as
s 3
on the rear of the TV to
Connect a scart lead from the socket marked
the scart socket on your VCR (refer to your VCR instruction manual).
3
indicated in the battery
compartment.
3
Replace the battery compartment
Connect the VCR to the mains socket and switch on.
5.
6.
and lock in place by twisting the
coin clockwise in the slot.
Insert a pre-recorded tape into the VCR and press the ‘PLAY’ button. This enables
the TV to locate and store the video channel during the ‘Automatically tuning the
TV’ procedure.
Always remember to dispose of batteries in an environmentally friendly way.
4-090-228-01
|