35” Tower Fan with
Remote Control
Model No: FC3-35R-12
FEATURES
ꢀ Remote Control
ꢀ 3 Speed Settings
ꢀ 3 Wind Modes
ꢀ 7.5 Hour Auto-off Timer
ꢀ Oscillation
ꢀ LED Indication Lights
ꢀ Oscillating Fan Cage
ꢀ Remote Storage
ꢀ Whisper Quiet Operation
ꢀ Contemporary Design
FC3-35R-12
© 2011 Soleus Air International
This product employs overload protection (fuse). A blown fuse indicates an overload or short-circuit
situation. If the fuse blows, unplug the product from the outlet. Replace the fuse per the instructions
below and check the product. If the replacement fuse blows, a short-circuit may be present and the
product should be discarded or returned to an authorized service facility for examination and/or
repair.
HOW TO REPLACE THE FUSE
1. Unplug the fan from the outlet. Place the plug on a firm, flat surface.
Open the fuse cover, located on the top of the plug, using your thumb
or a flathead screwdriver to slide the over towards the prongs.
NOTE: Ensure that the fuse cover is completely open before attempting
to remove the fuse.
2. Remove the fuse carefully by using a small screwdriver to pry the fuse
out of the compartment by the metal ends of the fuse.
3. Risk of fire. Insert a new 2.5 Amp, 125 Volt fuse (provided with product)
into the fuse compartment, making sure that the fuse is securely in
place.
4. Slide the fuse cover closed completely. If the fuse cover is difficult to
close, make sure the fuse is properly secured in place by pressing
down on the metal ends of the fuse.
CAUTION: Risk of fire. Do not replace the attachment plug. It contains a
safety device (fuse) that should not be removed. Do not use the product if
the attachment plug is damaged.
To avoid a risk of fire, only replace with a 2.5 Amp, 125 Volt fuse (provided
with the product). To order a new fuse, contact SI Products Service at
(888) 856-6781
3
WARNING: This fan is equipped with a polarized plug (one blade is wider than the other). The plug is in-
tended to fit into a power outlet only one way, with the wide blade in the wide slot. This is a safety feature; if
you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug still does not fit, contact
a qualified electrician.
DO NOT DEFEAT THE SAFETY PURPOSE OF THE POLARIZED PLUG.
TECHNICAL SPECIFICATIONS
Voltage Rating
Power Consumption
Unit Size
120V, 60Hz
40W
9.25 in. (W) x 11.25 in. (D) x 34.375 in. (H)
8.375 lbs
Unit Weight
4
ASSEMBLY
WARNING: DO NOT plug in fan before assembly.
Tools required: Phillips screwdriver (not included)
Fan Assembly:
1. Assemble the fan base by inserting the back base piece (1) into the front base piece (2). Use the included
screws (3) to secure the base together.
2. Slide the power cord (6) attached to the fan body (4) through the power cord slot (5) on the back base
piece (1) and secure.
3. Use the remaining screws (3) to attach the base (1 & 2) to the fan body (4).
4
5
1
2
6
3
3
5
OPERATING INSTRUCTIONS
Using Fan Controls (Set fan on a stable, level surface)
1. Turn the fan on and off by pressing the POWER button located on the control panel or the included remote
control.
2. Adjust the speed setting by pressing the FAN SPEED button on the control panel or the remote control.
Each press of the FAN SPEED button will change the speed setting on the fan. The LED corresponding
lights will light up above the fan speed icons: Low, Medium, and High
3. To oscillate the fan cage, press the OSCILLATION button located on the fan control panel or the remote.
Each press of the OSCILLATION button will enable or disable oscillation
4. This fan includes a 7.5 hour auto shut-off timer. To operate the timer, press the TIMER button located on
the control panel or remote control. Each press of the TIMER button on the remote will change the time for
the fan to automatically shut-off. Press the TIMER button once and the fan will be set to turn off in one
half hour. Press the timer twice and the fan will shut off in 1 hour, press the timer 3 times and the fan will
be set to turn off in 1.5 hours. The timer LED lights will light up with each press of the TIMER button. If
multiple LED lights are lit, add up the corresponding hours to get the shut off time. For example: 1H and
4H are lit at the same time. This means that the fan will automatically shut off in 5 hours.
5. Pressing the WIND MODE button on either the fan or the remote will choose the desired wind mode: Stan-
dard, Natural, & Sleep. In standard mode the fan operates at a steady speed. Natural mode simulates the
wind by randomly alternating the fan speed. In Sleep mode the fan decreases speed in the middle of the
oscillation pattern as to not disturb someone sleeping.
LOW
MED
HIGH
NATURAL SLEEP
TIMER HOURS
TIMER
BUTTON
POWER
BUTTON
FAN SPEED
BUTTON
OSCILLATION
BUTTON
WIND MODE
BUTTON
6
CLEANING & MAINTENANCE
1. Turn the fan off and unplug the unit.
2. Wipe the fan down with a damp cloth for most efficient operation.
3. Air dry the fan completely before use.
4. Never use abrasive cleaning agents or solvents. This may cause damage or deterioration to the surface of
the unit.
5. Do not immerse the fan in any form of liquid. Do not allow water to drip on or into the fan motor
housing.
STORAGE
If the fan will not be used for a long period of time, store it in a cool, dry location when not in use. To
prevent dust and dirt build-up, use the original packaging to repack the unit.
OVERHEAT PROTECTION
A thermostat is built into the motor to prevent overheating. If the fan temperature exceeds the limit on the
thermostat, the fan will automatically shut-off to prevent overheating and protect the fan components from
damage.
REMOTE CONTROL
The supplied remote uses 2 “AAA” battery. The remote will work at a distance of roughly 25 feet, and an an-
gle of 60°.
7
WARRANTY
One Year Limited Warranty
Soleus International Inc. warrants the accompanying Soleus Air Fan to be free of defects in material and workmanship
for the applications specified in its operation instruction for a period of ONE (1) year from the date of original retail
purchase in the United States.
If the unit exhibits a defect in normal use, Soleus International Inc. will, at its option, either repair or replace it, free of
charge within a reasonable time after the unit is returned during the warranty period.
As a condition to any warranty service obligation, the consumer must present this Warranty Certificate along with a
copy of the original purchase invoice.
THIS WARRANTY DOES NOT COVER:
•
Damage, accidental or otherwise, to the unit while in the possession of a consumer not caused by a defect in
material or workmanship.
•
Damage caused by consumer misuse, tampering, or failure to follow the care and special handling provisions
in the instructions. This includes dents, accidental or otherwise, to the base and head of the unit.
•
•
Damage to the finish of the case, or other appearance parts caused by wear.
Damage caused by repairs or alterations of the unit by anyone other than those authorized by Soleus
International Inc.
•
Freight and Insurance cost for the warranty service.
ALL WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANT ABILITY ARE LIMITED TO
ONE-YEAR DURATION OF THIS EXPRESS LIMITED WARRANTY. SOLEUS INTERNATIONAL INC.
DISCLAIMS ANY LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES AND IN NO EVENT
SHALL SOLEUS INTERNATIONAL INC’S LIABILITY EXCEED THE RETAIL VALUE OF THE UNIT FOR
BREACH OF ANY WRITTEN OR IMPLIED WARRANTY WITH RESPECT TO THIS UNIT.
This warranty covers only new products purchased from our authorized dealers or retailers. It does not cover used, sal-
vaged, or refurbished products.
As some states do not allow the limitation or exclusion of incidental or consequential damages, or do not allow
limitation on implied warranties, the above limitations and exclusions may not apply to you. This warranty gives you
specific legal rights, and you may also have other rights that vary from state to state.
For Technical Support & Warranty Service
Please Call (888) 876-5387
Or Write To:
Soleus International Inc.
20035 E. Walnut Dr. N.
City of Industry, CA 91789 USA
8
|