ICS Series
ICS 1030
A HI PERFORMANCE LCR THAT CAN STAND WITH THE BEST
TWO CHANNEL MONITORS
The left and right speaker in an audiophile two-channel
system can uncannily recreate all the complexity, detail
and space of a live performance, while the center channel
speaker is regarded as the most important speaker in any
multi-channel, surround system. LCR’s, are a multipurpose
design for both of these critical applications. The ICS 1030
is a D’Appolito Array, designed by Snell chief engineer, Joe
D’Appolito. As an Left & Right it can haunt you with preci-
sion and soundstage, while as a Center it captures every
whisper, every nuance. Together they set the tonal balance,
called timbre, for the rest of the system. The ICS 1030 takes
its drivers and crossover design of the acclaimed Snell LCR7
and integrates them into a utility, in-cabinet LCR. As such, it
is designed to fit into furniture or millwork, and is tuned to
compensate for the sonic problems that these cabinet bound-
aries cause. The result is a speaker that perfectly matches
the LCR7, and its two cousins the AMC 830 In-Wall and AMC
6030 In-Ceiling Monitor. Any combination of these four
models can be mixed and matched to make a fully integrated
system that will work with any room décor.
ICS 1030
Design Acoustic Suspension D'Appolito Array
Frequency Response 75Hz-22kHz+3dB
Sensitivity 90dB
Nominal Impedance 4 Ohms
Crossover Frequency 2.0kHz
Recommended Amplifier Power 50-300 Watts
Maximum Output (per pair) 110dB
Placement Wall, or Shelf
Dispersion Angle (+1dB of on-axis response) Horizontal: +45 degrees
Vertical:
+15 degrees
Drive Units Tweeter: 1-inch SEAS Silk Dome
Woofer:
Video Shielding Standard
Dimensions Height:
Width:
Two 5.25-inch SEAS Treated Paper, 5mm Excursion
19-inches
7-inches
Depth:
8.75-inches
Finishes
Cabinet: Textured Black Paint
Grille: Black Cloth over MDF Frame
Munufactured by Snell Acoustics, PO 3717, Peabody MA 01960
|