FireWire 3-Port CardBus
Quick Installation Guide
Introducing the FireWire 3-Port CardBus
The FireWire 3-Port CardBus is designed to add FireWire
(1394a) interface to notebook computers for easy
connectiontoDVcamcorders,harddiskdrives,scanners,
printers, and other 1394 devices. For your convenience,
a FireWire (1394a) 6-pin/4-pin DV cable and deluxe DV
editing software are included for a complete DV editing
solution.
FeaturesandBenefits
•
•
•
•
•
Compliant with IEEE 1394-1995, P1394a-2000 and
OHCI 1.1 standards
Supports serial bus data transfer rates of 100, 200
and 400Mbps
Hot-swapping allows you to connect/detach
devices without powering your computer off
Supports both asynchronous and isochronous data
transfer modes
Works with a variety of 1394 devices including
digital cameras, DV camcorders (Sharp, Sony,
Panasonic,JVC,Cannonandotherbrands),portable
harddisks,CD-RW/DVD-ROMs,printersandother
audio/video devices
•
The included Ulead VideoStudio DV editing
software provides exciting digital video capturing
and editing capabilities
04-0263E
1
Hardware Installation
General instructions for installing the card are provided
below. Since the design of notebook computers vary,
refer to your system reference manual for further
information, if needed.
1. Power off your notebook computer and any other
connected peripheral devices.
2. Insert the PC Card into the CardBus Type II slot of
your notebook computer with its 68-pin connector
facing the slot. Make sure it is inserted all the way in
for a solid connection.
3. Power on your notebook computer.
Driver Installation
This section will guide you through the installation of
your FireWire 3-Port CardBus.
Windows2000/XP/Server2003/Vista
Windows2000/XP/Server2003/Vistawillautomatically
detect and install the correct driver for the FireWire
(1394a) host adapter.
Verify Driver Installation
1. Right click My Computer, then clickManage. Click
Device Manager.
2. Double click 1394 Bus Controller or IEEE 1394 Bus
host controllers option.
3.
IEEE 1394 Host Controller should be displayed.
3
Ulead VideoStudio Software Installation
TheFireWire3-PortCardbusincludesUlead® VideoStudioTM
digitalvideoeditingsoftwareforproducinghomevideos,
complete with attractive titles, transitions and sounds.
Before installing VideoStudio, make sure your adapter
andDVcamcorderareproperlyinstalledandconfigured.
See next section, Connecting DV Camcorder, for more
details on how to properly install your DV camcorder.
1. Insert the Ulead VideoStudio DV software CD.
Auto-run should start automatically. If not, click
Start, Run, type X:\Autorun.exe, then click OK.
(Replace X: with the drive letter of your CD-ROM)
2. Choose Install Ulead VideoStudio and follow the
onscreen instructions to complete the installation.
Note: For instructions on how to use Ulead
VideoStudio, please refer to VStudio.pdf file
located in the Document\Manual directory on the
Ulead VideoStudio DV editing software CD.
Connecting a DV Camcorder
Before setting up the digital video camcorder, verify the
FireWire 3-Port CardBus driver has been successfully
installed in your system, then follow the procedures
below.
1. Boot up your system.
2. Connect the 4-pin connector of the provided
FireWire (1394a) DV cable to your camcorder.
3. Connect the 6-pin connector to the FireWire (1394a)
port.
4. Power on the camcorder. The camcorder should
now appear in Device Manager.
4
VerifyDVCamcorderSetup
1. Right click My Computer, click Manage, then click
Device Manager.
2. Double click Imaging Device(s).
3.
Microsoft DV Camera and VCR or DV Camcorder
should be displayed.
Connecting Other 1394 Devices
Many FireWire devices have built-in driver support with
Windows 2000/XP/Server 2003/Vista. Please refer to
the device’s user manual for installation information.
Depending on the device you purchased, a different 1394
cable may be needed. Refer to your 1394 device's manual
for more details.
5
Blank Page
6
Technical Support and Warranty
QUESTIONS? SIIG’sOnlineSupporthasanswers! Simplyvisitour
database is updated daily with new drivers and solutions. Answers
toyourquestionscouldbejustafewclicksaway. Youcanalsosubmit
questions online and a technical support analysts will promptly
respond.
SIIGoffersalifetimemanufacturerwarrantywiththisproduct. Please
see our web site for more warranty details. If you encounter any
problems with this product, please follow the procedures below.
A) If it is within the store's return policy period, please return the
product to the store where you purchased from.
B) Ifyourpurchasehaspassedthestore'sreturnpolicyperiod,please
follow these steps to have the product repaired or replaced.
Step 1: Submit your RMA request.
request to SIIG RMA. If the product is determined to be
defective,anRMAnumberwillbeissued. SIIGRMAdepartment
can also be reached at (510) 413-5333.
Step 2: After obtaining an RMA number, ship the product.
• Properly pack the product for shipping. All software, cable(s)
and any other accessories that came with the original package
must be included.
• Clearly write your RMA number on the top of the returned
package. SIIG will refuse to accept any shipping package, and
will not be responsible for a product returned without an
RMA number posted on the outside of the shipping carton.
• You are responsible for the cost of shipping. Ship the product
to the following address:
SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
RMA#:
• SIIG will ship the repaired or replaced product via Ground
in the U.S. and International Economy outside of the U.S. at
no cost to the customer.
7
About SIIG, Inc.
Foundedin1985,SIIG,Inc.isaleadingcomputerupgrademanufacturer
ofI/Oconnectivityproducts,includingPCI&ISAserialandparallel
ports, USB, Serial ATA & UltraATA controllers, FireWire (1394a/b),
networking, sound cards, and other accessories. SIIG is the premier
one-stop source of upgrades.
SIIGproductsoffercomprehensiveusermanuals,manyuser-friendly
features, and are backed by an extensive manufacturer warranty.
High-quality control standards are evident by the overall ease of
installation and compatibility of our products, as well as one of the
lowest defective return rates in the industry. SIIG products can be
found in computer retail stores, mail order catalogs, through major
distributors, system integrators, and VARs in the Americas and the
UK,andthroughe-commercesites.
PRODUCT NAME
FireWire 3-Port CardBus
FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS
B OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE
FCCCOMPLIANCESTATEMENT:
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE
SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
FireWire3-PortCardBusisatrademarkofSIIG,Inc. SIIGandtheSIIGlogoareregisteredtrademarks
ofSIIG,Inc. MicrosoftandWindowsareregisteredtrademarksofMicrosoftCorporation. Pentiumis
aregisteredtrademarkofIntelCorporation. Othernamesusedinthispublicationareforidentification
onlyandmaybetrademarksoftheirrespectivecompanies.
August, 2007
Copyright © 2007 by SIIG, Inc. All rights reserved.
|