Senco Nail Gun SCN60XP User Guide

SCN60XP  
XtremePro2½" Rugged-Duty Coil Nailer  
The rugged-duty SENCO® SCN60XP Coil Nailer is light enough for  
one-handed operation, yet is up to 25% more powerful. It can hold up to  
275 nails (depending upon nail type) for maximum productivity in a  
wide variety of applications.  
Tool Specifications:  
Item #: 520101N - Contact actuation  
Tool Weight: (Unloaded) 7.5 lbs. (3.4 kg)  
3
8
Height: 12 ⁄ " (314mm)  
Length: 14" (356 mm)  
Collation: Flat, angled coil wire  
Operating Pressure: 70-120 p.s.i.g. (4.8-8.3 bar)  
Mode of Operation: Tool is avilable with either sequential or contact  
actuation trigger mechanism.  
3
8
Hose Fitting: ⁄ " NPT  
Fastener Specifications:  
Drives 11, 11.5 and 12.5 Gauge. Round-Head Nails, 2"– 2½" 6d to 9d  
Nail Range. Capacity 250-275  
R
2
21/4 21/2  
23/8  
BK (.099)  
BL (.099)  
GL (.113)  
GD (.113)  
Applications:  
For on-site, manufactured housing, including sheathing, decking,  
subflooring, and exterior decks. Also, industrial markets such as  
heavy-duty pallet construction, pallet repair, and crate and box  
assembly.  
Features and Benefits:  
• Highest power-to-weight ratio in its class  
• Light enough for one-handed operation for quality workmanship and  
greater productivity  
• Adjustable depth-of-drive allows for precise countersinking at a  
lower air pressure  
• High load capacity (up to 275 nails)  
• Fast cycle time increases productivity  
• E-Z load design saves time  
Choose the right trigger system for your specific needs!  
Sequential Actuation Trigger (also known as restrictive trigger or trigger fire)  
operates in the following a sequence - depress the safety element at the nose of tool  
against the work surface then pull the trigger. After each fastener is driven, release the  
trigger and lift the tool off the work surface before starting the sequence again. This  
trigger is recommended and acceptable for most applications.  
• Five year limited warranty  
Contact Actuation Trigger (also known as dual action, bounce or bottom fire)  
operates in the following sequence- pull the trigger first and keep the trigger pulled  
while moving the tool along the work surface with a bouncing motion, depressing  
the safety element at the nose of the tool against the work surface where the fastener is  
to be driven. This trigger is recommended for use by trained professionals only in  
high production or volume applications.  
Always read the Operators Manual and Safety Instructions with all tools to ensure proper  
use and safety precautions. For additional information on trigger systems and how SENCO  
will save you time, reduce costs, and increase quality, call our toll-free Action Line:  
800-543-4596 to find your nearest Authorized Senco Dealer, Distributor or visit our web  
®
©2007 Senco Products, Inc.  
 

Renesas Computer Hardware FP 100B User Guide
RF Link Technology Network Router XL 2000 H User Guide
Rover Lawn Mower 11024 User Guide
Ryobi Router R181DB1 User Guide
Samsung Blu ray Player BD E5300 ZA User Guide
Samsung Personal Computer DP700A3DA01US User Guide
Sanyo Digital Camera VPC S1070 User Guide
Sanyo Microwave Oven EM G5596V User Guide
Schumacher Battery Charger 00 99 000835 User Guide
Senco Nail Gun PC0960 User Guide