2013 Samsung TV
F/W Upgrade Guide
Samsung Electronics
Step2. How to upgrade the Firmware by USB
4. The message for searching for update
1. Insert the USB Memory Drive
containing the firmware into the USB
port of TV.
files is displayed. Press Yes.
2. Turn on the TV and wait around 1 or 2
minutes.
3. Press the MENU button, select
‘Support’, ‘Software Update’, and then
‘By USB’.
5. If the TV finds a valid firmware version,
it displays the message below.
Press Yes, then TV starts updating.
A new software version is available.
Update from version 1013 to version 1015?
Yes
No
6. Press Yes, then TV starts updating.
When the firmware upgrade is
complete, the TV turns off and then
back on by itself.
Updating TV software…
Your TV will turn off and on again
Automatically after completing update.
80%
Cautions
While upgrading,
Do not pull the USB Memory drive out.
Do not unplug the power cable.
Do not turn off the TV.
※ Warning
Pulling the USB Memory drive out or unplugging the power cable will cause a
firmware error or main board failure. Firmware errors and main board failures are
not covered by Samsung warranty policy.
How to Upgrade the Firmware by Online
1. Turn on the TV.
2. Confirm that your TV is connected to
the Network by using the Network
Status test.
4. The message “Connecting to the
network server…” is displayed.
Checking for updates…
5. If the TV finds a higher firmware
version from the server, TV asks
you to update new version. Press
Yes.
3. Press the MENU button, select
‘Support’, ‘Software Update’, and then
‘Update now’.
A new software version is available.
Update from version 1013 to version 1103?
Yes
No
6. It starts downloading. When the
firmware upgrade is completed, the
TV turns off and then back on by itself.
Updating TV Software…..
Your TV will turn itself off and on again
Automatically after completing update.
OK
|