-
CD-quality sound.
What is MP3?
MP3 refers to MPEG1 LAYER3. MP3 is a music file made of
audio data compression technology with no degradation of
the original sound.
What is yepp’?
yepp’ is an advanced digital audio player which doesn't need a
cassette tape or CD. You can download MP3 files from the Internet
or PC Communications and enjoy great sound any time, any place.
2
Listening to music through yepp’
Searching the MP3 files at a faster speed
Insert batteries into the battery compartment, and then
connect the remote controller (earphone) correctly.
Press the
and
buttons too move to the next track.
Turn on the Power
To search within a song being played back
Press the
controller.
button on the yepp player or remote
Press and hold the FF button ( ) while a song is being
played back to fast forward. Release the button to
resume playback.
Playback
Note
Press and hold the REW (
) button while a song is
being played back to move quickly backward.
Press the
button on the yepp player or the remote
controller.
Note
To pause playback, press the
button the
mark
To skip to the next song while another song is being
played back
blinks on the remote controller display panel. Press the
button again to resume playback. Every buttons
enable the lamp on the panel to blink for 3 seconds.
Press the FF button to move one track forward.
Control Volume
To search a song in stop mode
Control volume with the volume control button (-/+) on
your yepp player or remote controller.
1 Press the FF button to move one track forward. To
play back the song that you chose, press the PLAY
Note
Volume can be controlled from 00 to 20. Press shortly to
move up or down by 1 step. Press and hold to move
continuously.
button (
).
2 Press the REW button to move one track backward.
Note
If the REW button is pressed before the first 5 seconds of
the track has played, the previous song will be repeated.
If the REW button is pressed after 5 seconds has played,
the current song will be repeated.
Stop Music
Press the STOP button ( ) of your yepp player or remote
controller to stop playing back sound.
Note
If the unit is in the Stop mode for more than 3 minutes it
will power off automatically.
4
Hold Function
Setting the Modes
While the Hold switch on your yepp player is on
Each time the EQ/REP button of your remote controller is
pressed and held, the modes will change in the order of
REP, ALL, SHU and INT.
Buttons on the yepp won't work. Each time a button is
pressed, “Hold” will appear for a short time on the display
only the buttons on your remote controller will work.
↔ REP mode : Repeats current track.
↔ ALL mode : Repeats all the tracks.
↔ SHU mode : Enables random playback.
↔ INT mode : Enables you to repeat the first 10
seconds of the tracks saved (for 10
seconds each).
While the Hold switch on your remote controller is on
The
mark will appear on the display panel. None of
the buttons on your remote control will work. The buttons
on your yepp will work.
Repeating Tracks/Section
Using the Equalizer
Press the “A ↔ B” button of your remote controller to
repeat the track or section that you selected. Setting 'Repeat
Track' needs a minimum of two seconds of play time.
Each time the EQ/REP button of your remote controller is
pressed, the equalizer modes will be changed in the
order of Classic, Jazz, Rock and Normal.
Normal mode is not indicated on the panel.
1 Press the A ↔ B button of your remote control at the
start point of the track or section that you want to
repeat. Then, 'B' blinks on the display panel.
Using the 3D Sound
2 Press this button again at the end point of the track or
Press the 3D buttonto add Surround 3D sound effect to
four different modes (Normal, Classic, Jazz, Rock).
The surround 3D sound is available only in the MP3
mode.
section that you want to repeat.
Note
The section from point A to point B that you selected will
automatically be repeated. To cancel this function, press
the A↔B button again. While tracks/sections are
repeated, only the Stop and A↔B buttons work.
5
Playing the recorded voice messages
Voice Recording
1 Use the FF ( ) and REW ( ) buttons to select the
track (V001, V002...) you prefer.
Recording the voice messages
2 Press the
button to playback the selected track.
1 Press the MODE button on the main unit to switch
into the voice mode.
You can pause the track by pressing the
once again.
button
-
Voice mode can only be activated in the stop mode.
-
Press the
button again to resume playback.
2 Press the REC button and the voice messages will be
recorded through the microphone.
Note
-
When you press the
V002... V00n, you can listen to the recorded track that applies
to the number currently shown on the LCD panel.
button without selecting V001,
-
Press the Stop button ( ) to stop recording. If you
repeat this operation over and over, the voice
messages will be recorded in the sequence of
V001, V002....V00N.
-
Press the FF or REW button during playback to move forward
or in reverse at a faster speed.
Note
-
This feature allows you to easily record lectures at school or
institute, interview and conference messages, etc. It therefore
enhances study effectiveness and lets you keep important
things for a long time.
Playing the recorded voice messages
1 Use the FF and REW buttons to select the track (V001,
V002...) you want to erase.
-
-
The player will automatically stop recording when the memory
becomes full.
2 Press the ERASE button for at least 1 second and the
message "Erase?" will appear on the LCD panel. Then
The voice messages are recorded on the built-in memory. If the
memory is short in capacity, however, they will be recorded on
the smart media card (in the sequence of V001, V002... V00N).
press the
button to erase the selected track.
-
-
Be careful not to press the Erase button long because the
erasing function may run.
Note
-
-
To cancel the erasing function press the
button.
Voice recording is made only on the main system.
After the selected track is erased, the player will show the next
track number.
6
Listening to FM Radio
To Search the Frequency Band
To Save Radio Station
1 Press the MODE button to switch to FM mode.
1 At the radio station frequency that you want to save,
press the EQ/REP button.
2 Press and hold either REW ( ) or FF ( ). Then, the
unit will automatically search from station to station
(Auto Search).
2 A saving location letter (a, b, c, d, e) blinks in front of
the radio station that the screen display shows, press
the A ↔ B button to choose one saving location.
Then, press the EQ/REP button once more to save.
3 To search manully in one step increments, press and
release either REW or FF.
-
The saving location letters (a, b, c, d, e) blink each
time the A↔B button is pressed.
Note
-
Once a radio station is saved, you can move
directly to the saved location by clicking on the
A↔B button.
-
-
In the FM mode, the LCD panel backlight is not turned on.
In the FM mode, the screen display does not appear in the
main system.
-
-
Once the power is turned off, initialization will be made at
MP3 mode. To set to FM mode, press the MODE button again.
Note
When in the FM mode, do not attempt Format, Delete or
Download.
-
-
Max. five stations (a, b, c, d, e) can be saved.
You can replace one station with another at each saving location.
But it is not possible to delete a saved station.
-
Press the Stop button for a moment to turn off the system.
7
Connecting yepp’ to PC or MAC
Minimum PC System Requirements
- Pentium 133 MHz
- Windows 98/2000
- 20 MB Free Disk Space
- CD-ROM Drive (Optimum:8 X and more)
- Built-in USB Port
1 Connect the USB cable to the USB port of the
computer.
2 Turn the player on and connect the other end of the
cable to the download connector.
Note
-
-
Be sure to install the yepp’ Explorer before connecting your
yepp’ to PC or MAC. When the message “Add new hardware
wizard” appears on the screen, click [Cancel] and then install
the yepp’ Explorer.
If the USB driver is not installed automatically, refer to page
10.
8
Installing Software on PC
RealJukebox
This software lets you listen to MP3 music on your
computer digitally and enables you to encode your
CDs into MP3 Files.
Insert the Installation CD into the CD-ROM drive.
The picture below appears when inserting the CD.
yepp’ Explorer
1 Click
Click
1 Click
Click
2 Click the next button on each successive window.
Note
-
If the Real Network home page is not connected
automatically when the Realjukebox program has been
installed, try to access “http://www.real.com”.
2 Click the next button on each successive window.
-
Install the other program or download the files depending
on your requirement.
Note
Install the other program or download the files
depending on your requirement.
9
Installing Software on PC (Windows 2000)
Formatting flash memory (continued...)
If USB port error occurs after installing the yepp’ explorer
in Windows 2000, do the following steps 1~3.
yepp’ Explorer
1 Execute the yepp’ Explorer.
-
Double-click the icon of the yepp’ Explorer on the
desktop.
1 Copy the secypusb. sys file from the installation CD.
2 Paste the secypusb. sys into 'Drivers' from the
system32 folder in Windows 2000 (System Root
Directory). (ex: / WinNT/ system/Drivers)
2 Click [File], [Format] and select [Flash Memory].
Note
Note
Even though the secypub. sys file is present in the
existing folder, by sure to run Change File.
-
-
-
-
Before formatting the flash memory or the SmartMedia Card,
connect your yepp’ to PC and click Refresh icon on the yepp’
Explorer.
If the optional SmartMedia Card is installed in the yepp’, file(s)
can also be saved to the card by clicking Copy to and selecting
Smart Media Card.
You can also format the flash memory or the SmartMedia Card
by pressing the right button on the mouse and selecting
Format.
Formatting Flash memory (or Smart Media Card) will delete all
existing files.
3 Re-boot the computer.
Installing Software on MAC
Insert the Installation CD into the CD-ROM drive.
The picture below appears when inserting the CD.
1 Execute the yepp’ Explorer.
-
Double-click the yepp’ Explorer icon.
RealJukebox
Connect your yepp’ to PC and execute the RealJukebox.
2 Click the button on each successive window.
-
1
After all installations are complete, the yepp’
Explorer folder is created.
2 Click/Double-Click through the following items.
Devices -->Samsung Ne....
3 Click Configure icon and Select Format_Flash_
Card/Format_Internal_Memory.
10
Formatting flash memory
Options (continued...)
Note
yepp’ Explorer
-
-
Before formatting the flash(SmartMedia) Card or the Internal
(flash) memory, press F5 Key to refresh. (Or click
View↔Refresh in the Main menu)
Formatting Flash memory(or Smart Media Card) will delete all
existing files.
MAC
Execute the yepp’ Explorer.
Double-click the yepp´ Explorer icon in the HDD.
1
-
-
Auto
-
Select when uploading
the SC4 file on the
form of the WAV file.
-
The device has been initially set
"Auto".
2 Click [File], [Format] and select [Flash Memory].
USB
When the communication is
not smooth in Auto, select an
USB cable.
Note
-
-
-
Before formatting the flash memory or the SmartMedia Card,
connect your yepp´ to PC and click Refresh icon on the yepp´
Explorer.
Note
If the optional SmartMedia Card is installed in the yepp´, file(s)
can also be saved to the card by clicking [Copy to] and
selecting SmartMedia Card.
Install the USB driver in the following sequence:
"Select USB (setting option)"-> "Turn on the yepp"-> "Connect a
cable to the PC". Then, the message of 'looking for a new device'
appears and simultaneously the USB driver is installed. If the
USB driver is not installed, even though you follow the above
instructions. (contact your PC vendor or service center.)
Formatting Flash memory (or Smart Media Card) will delete all
existing files.
11
Options
Sending files to yepp’ (continued...)
RealJukebox (Installation of the USB driver)
Before sending files to your yepp’, connect the yepp’ to
PC and execute the RealJukebox.
1 After installing RealJukebox, connect the yepp to the
PC.
2 Execute RealJukebox.
3 Click on Devices icon on RealJukebox screen.
4 Select Install Device.
yepp’ Explorer
1 Execute the yepp’ Explorer.
-
Double-click the icon of the yepp’ Explorer on the
desktop.
5 Follow the on-screen instructions for RealJukebox.
2 Turn on the yepp’ by pressing
.
MAC
3 Click the Refresh icon on the yepp’ Explorer.
4 Click [Copy to] and [Flash Memory] or [SmartMedia
Check the Explorer is accessed.
Access is allowed only when Explorer
is selected. If Explorer is not
selected, select Explorer and click
on the OK button.
Card].
5 Select the file you would like to send to your yepp’.
6 Click [Open].
-
The selected file has been saved. Now you can
listen to music with yepp’ after removing the
parallel cable.
Uploading Voice
Click [File], [Copy to] and select [PC].
Note
When a voice file is transmitted to another person by
E-mail, receiver should install the mi-sc4.acm file
atc://windows//system to execute the file.
The mi-sc4.acm file can be downloaded from
-
-
The yepp’ uses around 1MB of memory for each minute of
music.
Execute file transfer in the MP3 mode only. If it is executed in
FM mode, errors may take place.
Note
If yepp Explorer is installed in your PC, mi-sc4.acm will
automatically be installed in c://windows//system.
12
Sending files to yepp’ (continued...)
Sending files to yepp’ (continued...)
RealJukebox
MAC
1 Execute RealJukebox.
1 Execute the yepp’ Explorer.
-
Double-click the RealJukebox icon on the desktop.
-
Double-click the yepp´ TM Explorer icon in the
HDD.
2 Turn on the yepp’ by pressing
.
2 Turn on the yepp’ by pressing
.
3 Click/Double-Click through the following items.
Devices---> Samsung Ne....
3 Click the [File] [Refresh] on the yepp’ Explorer.
4 Press F5 Key to refresh.
4 Click [Copy to] and [Flash Memory] or [SmartMedia
Card].
5 Click Internal Yepp.../Smart Media...
5 Select the file you would like to send to your yepp’.
6 Drag your selected file from your folder and drop into
Yepp.../Smart Media... window.
6 Click [Open].
-
The selected file has been saved. Now you can
listen to music with yepp’ after removing the USB
cable.
7 Click the Begin Transfer icon, at the left side of the
RealJukebox window.
Note
Execute file transfer in the MP3 mode only. If it is
executed in FM mode, errors may take place.
Note
-
-
Music Match Jukebox is used for the Mac.
You can download this software (free version) from internet
sites. (http://www.musicmatch.com)
-
The yepp’ uses around 1MB of memory for each minute of
music.
13
Making MP3 files from an audio CD
You must install RealJukebox on your computer before
making MP3 files.
3 Insert an audio CD into the CD-ROM drive.
1 Execute RealJukebox.
-
The CD information and Auto-Record Message is
displayed. (If the CD already recorded, Auto-
Record Message is not displayed.)
-
Double-click the icon of the RealJukebox on the
desktop.
Note
RealJukebox is a music management system provided by
RealNetwork.
-
If you select "Yes....", the all tracks is recorded.
(If you want to select the track you would like to
convert into an MP3 file, Select "No.....", and
follow next step.)
2 Set up enviroment for making MP3 files from an audio
CD.
1) Click "Tools" and "Preferences" from the main
menu.
2) Click the tab "Audio Quality".
4 Select the track you would like to convert into an
MP3 file.
5 Click [Controls] and [Record Ctrl+R].
3) Select "MP3 Audio" and 'Quality level' you would
like to.
4) If the MPS files will be played on more than one
computer, make sure "Secure my..." is not checked.
6 Recording status is displayed.
-
Now you can listen to music on your yepp’ after
sending files to it.
5) Select “I accept...” in the POP-UP Window.
6) Click "OK".
14
Deleting files
File Replace (on PC)
Connect your yepp’ to your PC and execute the yepp’
Explorer before deleting.
1 Click the file that you want to replace.
2 Drag the file to destination.
yepp’ Explorer
Note
-
File replacement can be made with the Smart Media card in
the same manner.
1 Click the file you would like to delete.
2 Click [File] and select [Delete].
-
File replacement is not made between flash memory(built-in
memory) and the Smart Media card (armoured memory),
because they are not compatible with SDMI (Secure Digital
Music Initiative).
-
You can also delete the file by pressing the right
button on the mouse and selecting Delete.
-
File Replacement is not possible on the MAC.
RealJukebox
1 Click/Double-Click through the following items.
Devices Samsung Ne....-->Internal Yepp.../Smart
Media...
SmartMedia Card
Your yepp' player allows you to save and enjoy many
more MP3 files by adding a SmartMedia Card. 8MB,
16MB, 32MB or 64MB SmartMedia Cards can be used.
2 Click the file you would like to delete.
3 Click [Edit] and select [Delete].
-
You can also delete the file by pressing the right
button on the mouse and selecting Delete.
1 Press the PUSH OPEN button to open the SmartMedia
Card Slot.
2 Insert the SmartMedia Card into the card slot of your
player. Verify that the SmartMedia Card mark is
displayed on your panel.
MAC
1 Click the file you would like to delete.
-
To send files to the SmartMedia Card, you must
format the card before using it.
2 Click [File] and select [Delete].
3 Push down the EJECT button (
) in the direction of
the arrow to take out the SmartMedia Card from the
slot.
15
Required check items using a SmartMedia Card
Troubleshooting
According to the prevention of an illegal
copy and copyright protection only an ID
indicated SmartMedia Card may be used.
The SmartMedia Card that has no ID
indication cannot be used.
The player does not work or nothing is displayed on the
Remote control LCD.
-
Check the capacity of the batteries. Two 1.5V AAA size
batteries are required.
-
Check the polarity (+ and -) of the batteries.
Available SMC
The buttons are not working.
-
Check if the Hold Switch is down. While the Hold Switch is
down, the buttons do not work.
Note
Do not insert/eject the SmartMedia card during
playback of MP3 files. The player may not recognize the
card or work properly. Always turn the player off before
inserting or ejecting the SmartMedia Card.
There is no audio produced when the
pressed in MP3 mode.
button is
-
Check that MP3 files are stored in the built-in memory or the
SmartMedia Card.
MP3 files cannot be downloaded.
Safety Precautions
-
-
Check and/or replace the batteries.
Check the connection between the parallel port of your PC
and the parallel cable.
- Do not drop your player or leave it under heavy
objects.
SmartMedia Card cannot be inserted into the player.
-
Make sure you are using the correct SmartMedia Card. Only
3.3V version cards will work in your yepp’. 5V version Cards
will not function correctly.
- Do not allow any liquids to contact the player.
If this happens, wipe the player with a dry cloth and
call a Samsung Electronics service center.
The files on the SmartMediaCard cannot be recognized.
- Avoid areas of high humidity, strong magnetic fields, or
sources of heat when storing your player.
-
MP3 files downloaded to another media card from a different
MP3 manufacturer may not work in your yepp’.
Format the SmartMedia Card and copy files again with the
yepp’ Explorer.
-
- Do not use thinner, alcohol, or benzene when cleaning
the player. It may damage the player.
16
Security
Technical Specifications
You can get legal MP3 files from a growing number of
Internet sites. Here are some sites which provide MP3
files.
Processor...........................................12MHz, 16bit CISC
Memory Capacity....................Built-in Memory 32/64MB
Power ..........................................................................3V
What is SecuMax?
Battery........................................................Two AAA-size
8-hr or longer playing time
With the increasing amount of digital multimedia
content, the content providers became concerned with
the ease in which the content could be copied and
distributed in violation of their copyrights. This matter
required the a system called SecuMAX for protecting
copyrighted music and for using legal content
conveniently.
(with alkaline batteries)
Dimensions (WxHxD).................................70x88x21mm
(2.75”x3.46”x0.83”)
76g (2.68 Oz; without batteries)
Case......................................................Plastic/Aluminum
File Transmission Speed.....................1.5Mbps, minimum
Memory Slot...................................SmartMedia Card slot
Noise Ratio ..............................................................85dB
Signal to Noise Ratio ...............................................7mW
Output Frequency Range.............................20Hz-20KHz
FM frequency............................................87.5~108MHz
-
-
-
SecuMAX protects the copyrighted music against
infringement.
SecuMAX can be adapted to various types of digital
contents.
For further details on SecuMAX, please visit
-
RealJukeboxTM is either a registered trademark or
trademark of Real Networks Inc. in the United
States and/or other countries.
-
-
Music CD-related data is provided through the
Internet from the CDDBTM Music CD Database.
Copyright© 1998 CDDB Inc. All rights reserved.
17
|