Samsung Cell Phone GA68 60747A User Guide

SYSTEM ACCESS CODES  
The DCS telephone system has the following pre-set (default) feature  
access codes. These codes can be used if a key is not available for  
the feature you want to use. Standard telephone users must always  
dial these codes.  
9
Call attendant or system  
operator  
54+zone Meet Me Page  
55 + 0  
55 + 1  
55 + 2  
55 + 3  
55 + 4  
55 + 5  
55 + 6  
55 + 7  
55 + 8  
55 + 9  
55 + ✱  
56  
Page all internal zones  
10 + xxx  
11  
Retrieve parked calls  
Put calls on and take calls off  
hold  
Page internal zone 1  
Page internal zone 2  
Page internal zone 3  
Page internal zone 4  
Page external zone 1  
Page external zone 2  
Page external zone 3  
Page external zone 4  
Page all external zones  
All Page  
12 +xxx  
Retrieve calls on hold at another  
station  
13  
Door lock release  
16 + xxx  
17  
Make speed dial calls  
Save number and redial it  
Recall dial tone for new call  
Last number redial  
Extension numbers  
Extension numbers  
Cancel Do not Disturb  
Set Do Not Disturb  
Set Message No Ring  
Cancel message  
18  
19  
2xx  
3xx  
400  
401  
41  
Meet Me Answer  
57  
Alarm sensor clear  
DISA alarm clear  
58  
59  
Walking class of service  
Cancel all call forwarding  
600  
42 + xxx  
43  
601 + xxx Set Forward All Calls  
602 + xxx Set Forward Busy  
603 + xxx Set Forward No Ans  
604 + xxx Set Fwd Busy/No Ans  
605 + xxx Set Fwd Follow me  
Set/return messages  
Busy station/line callback  
Busy station camp-on  
Set up a conference  
Enter account code  
Set programmed station  
message  
44  
45  
46  
47  
65  
Directed call pickup  
Group call pickup  
Universal Answer  
Voice Dialler  
48  
66  
67  
49  
Send flash to outside line  
Station hunt group  
681  
682  
7xx  
8x  
500  
to  
Voice Dialler Record  
Individual line numbers  
Line groups  
529  
Station hunt group  
53+grp+0 Out of group  
53+grp+1 In group  
0
Line group 0 (Local)  
Where xxx is a line, extension or group number  
CODE: GA68-60747A  
ED: 01  
AUGUST 1998  
Printed In Korea  
 
QUICK REFERENCE GUIDE  
SAMSUNG  
DS-2100B  
AUGUST 1998  
 
DS-2100B Layout  
Volume Control Keys  
Used to set independent  
SPEAKER  
For handsfree operation  
and ringing  
levels for handset, speaker,  
ring and page volume  
Multi-Function Lamp  
Indicates call progresses  
1. Fast flickering indicates a  
new incoming call  
2. Slow flikering indicates  
any message left on you  
3. Any steady lamp indicates  
speakerphone mode  
SPEAKER KEY Used to switch  
call to speakerphone  
MICROPHONE  
For handsfree operation  
Redial Key  
For Last Number Redial  
Memory Key  
Used for Speed Dialling  
TRANSFER Key  
For transferring a call  
1
 
THINGS YOU SHOULD KNOW  
USER ORIENTATION  
The system automatically numbers the various system resources as  
follows:  
System Extensions  
Outside Lines  
Station Groups  
201, 202, 203,........etc  
701, 702, 703.........etc  
500 -529  
These are the normal setting however your Samsung Communication  
Specialist may have changed the system to meet your Company's  
specific requirements. Please see your System Administrator.  
SPEAKERPHONE  
Pressing the Speakerkey will answer or release a call on the speaker  
phone.  
Switching from the handset to the speaker phone is easy. Press the  
Speakerkey and hang up the handset.  
The Multi-Function Lamp will steady on when you are using speaker  
phone.  
OUTSIDE CALLS  
MAKING AN OUTSIDE CALL  
• Lift the handset or press the Speaker key and dial the outside  
line access code  
• Dial the telephone number  
• Finish the call by replacing the handset or pressing the Speaker key.  
ANSWERING AN OUTSIDE CALL  
• Lift handset and you are automatically connected to the ringing call  
OR  
• Press the Speaker key to answer on the speakerphone.  
2
 
SENDING A FLASH  
While on an outside call, press the TRSF and dial 49 to send a flash  
to the telephone company.  
BUSY LINE QUEUING WITH CALL-BACK  
If you receive busy signal when you are selecting outside line,  
• Dial 44 and you will hear confirmation tone.  
• When the line becomes free the system will call you back.  
• Lift the handset or press Speaker key to answer.  
INTERCOM CALL  
MAKING A CALL  
• Dial the extension number or group number.  
• Wait for the party to answer. If you hear a brief tone burst  
instead of ringback tone, the station you called is set for Voice  
announce or Auto answer. Begin speaking immediately after the tone.  
• Finish the call by replacing handset or press Speakerkey.  
ANSWERING INTERCOM CALLS  
• Lift the handset -OR- press the Speakerkey.  
• To finish the call, replace the handset or press the Speakerkey.  
BUSY STATION CALLBACK  
When you call another station and receive a busy signal:  
• Dial 44 and you will hear confirmation tone.  
• When the busy station becomes free, your keyset will ring.  
• Lift the handset or press Speakerkey to call the now idle station.  
BUSY STATION CAMP-ON  
When you call another station and receive a busy signal:  
• Dial 45  
• The called station will receive off-hook ring tone.  
• Wait for the called party to answer.  
CALLING YOUR SYSTEM OPERATOR  
• Dial 9 to call your system operator.  
3
 
CALL PROCESSING  
RETRIEVING CALLS HELD AT ANOTHER  
STATION  
When a line is on hold and it does not appear on your keyset,  
• Dial 12 plus the line number or the extension number of the  
station that placed the call on hold.  
TRANSFERRING CALLS  
• Press theTRSFkey and dial an extension number or group number.  
• Hang up when you hear ringing  
OR  
• Wait for the called party to answer, announce the call and then  
hang up.  
• To return to outside party, press TRSF.  
TRANSFER WITH CAMP-ON  
• Transfer the call as per the above  
• After hearing the busy signal just hang up  
• The call will recall to your station if not answered within the  
specified time.  
CONFERENCE CALLS  
While engaged in a conversation,  
• Dial TRSF 46 and receive conference tone.  
• Make another call, either intercom or outside, press TRSF key  
and receive conference tone.  
• Make another call or press the TRSF key to join all parties.  
• Repeat last step until all parties are added.  
STATION CALL PICKUP  
To pick up (answer) a call ringing at another station:  
• Lift your handset and dial 65 plus the extension number of the  
ringing phone.  
4
 
GROUP CALL PICKUP  
To pick up (answer) a call ringing in any pickup group,  
• Lift your handset and dial 66 plus the desired group number  
01-20  
DIALLING FEATURES  
SPEED DIALLING  
• Press the Memorykey or dial 16.  
• Dial the desired speed dial number location.  
• The telephone number is automatically dialled for you.  
PROGRAMMING PERSONAL SPEED  
DIAL NUMBERS  
To store telephone numbers in your personal speed dial list.  
• While on-hook, press TRSF and then dial 105 .  
• Dial a speed dial number (00-49).  
• Dial a line or line group access code .  
• Dial the telephone number to be stored (18 digits maximum).  
It can include #, .  
• PressTRSF to store number.  
LAST NUMBER REDIAL  
• Press the Redialkey or dial 19.  
PAGING AND MESSAGING  
MAKING A PAGE CALL  
To make an announcement through the keyset and/or external  
speakers:  
• Lift the handset and dial 55.  
• Dial the desired zone number 1, 2, 3 or 4, for internal zones  
5
 

Q See Camcorder QS926C User Guide
Radio Shack Cordless Telephone 43 3537 User Guide
Radio Shack Cordless Telephone ET 596 User Guide
Rangemaster Beverage Dispenser Refrigerated Wine Cooler User Guide
RCA Car Video System DRC6379T User Guide
Samsung Cell Phone 426 User Guide
Samsung Digital Camera u ca5 User Guide
Samsung Range FTQ387 User Guide
Sanyo Camera Accessories KR 600AAL User Guide
Sears Sewing Machine 1340 User Guide