Dome Ca me ra s
With Multi-Axis Gimbal Brackets*
Model
EV-1223C12
EV-122C-2
EV-122B-4
Lens Angle Type
4.3mm
78° Color
2.9mm
120° Color
4.3mm
78°
B/W
Viewing angles are approximate
SECO-LARM offers both Black & White and Color
Dome Cameras for use in those applications which
require an attractive, inconspicuous look.
SECO-LARM dome cameras offer high resolution
with low lux in a compact and durable enclosure.
Technical Specifications:
Type
Chip
Resolution
Pickup elements
Scanning system
Sync
Color Cameras
1/3” CCD, Sony
420 TV lines
512 x 492 pixels (NTSC / EIA)
2:1 interlace
B/W Camera
1/3” CCD, A1 PROs
*For ceiling or wall mounting
Wire
Lens
Harness
Internal
Video output
1V pp composite output, 75 ohms
EV-1223C12 / EV-122B-4 (4.3mm)
EV-122C-2 (2.9mm)
EV-1223C12 / EV-122B-4 (78°)
EV-122C-2 (120°)
Lens
Screw
Screw
Support
Bracket
Wire
Harness
Support
Bracket
Support
Bracket
Viewing Angle*
Minimum illumination
Gamma correction
S/N ratio
0.1 lux
0.45
>48dB (AGC off)
For wall mounting. Remove the 2 screws and turn the
lens 90o clockwise until the wire harness is adjacent to the
support bracket, then replace the 2 screws to secure it.
Auto Electronic Shutter (AES)
1/60~1/100,000 sec. (NTSC / EIA)
Auto & Manual
Shutter control
Backlight compensation
Gain control
Auto
AWB
N/A
White Balance
D/A Bits
10
Power source
12VDC
Power consumption
Operating temperature
Dimensions
110mA
14°~140° F (-10°~60° C)
31/2” x 21/4” (88 x 57 mm)
100mA
Copyright 2007 SECO-LARM U.S.A., Inc. All rights reserved.
The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the right to change prices and specifications without notice. SECO-LARM is not responsible for misprints.
®
1.949.261.2999 (CA & Int’l)
1.800.662.0800
Fax: 1.949.261.7326
Email: info@seco-larm.com Website: www.seco-larm.com
BasicDomeCamsb.cdr
16842 Millikan Avenue, Irvine, CA 92606
|