SPECIFICATIONS
I/ O Connectors:
Input Sensitivity:
Input Impedance:
Output Impedance:
Max Output Level:
Equalization:
Rumble Filter:
THD
S/N Ratio:
PWR:
Size:
Weight:
RCA, 1/4" TRS Stereo
30 dB gain @ 1kHz, 47k ohms Input Z
50k ohms
8 ohms Headphone, 100 ohms RCA
>10dB @ 1kHz at at .1% dist.
RIAA +/- 1.5 dB, 20Hz to 20kHz
20Hz
.02% @ 1KHz
>80 dB unweighted
15 DC - 700mA
VP530
Tube Phono Preamp USB
6"w x 2.5"h x 5.4"d
2 lb
1 Power LED
Indicator:
VERY IMPORTANT NOTES:
Occasionally with certain configurations, you may experience
excessive hum or buzz. In this case, try connecting the Ground
connection from your turntable directly to your receiver/ampli-
fier, thus bypassing the VP530.
If you connect the output of the VP530, either the RCA or head-
phone outs, without connecting a turntable to the input - you
will experience noise. The combination of the VP530 and the
turntable (with its RIAA equalization curve) - complete a crucial
circuit for proper operation.
FOR WARRANTY INFORMATION SEE OUR WEBSITE WWW.ROLLS.COM
Bellari is a division of Rolls Corporation
Salt Lake City, UT
02/08
USER GUIDE
|