Roland Recording Equipment JV1010 User Guide

®ÂØÒňή  
JV-1010  
TurboStart  
64-Voice Synthesizer  
Module  
Playing the Demo Songs  
It’s a Fact…  
The JV-1010 64-Voice Synthesizer Module is a half  
rackspace sound module that features the full sound  
set of the JV-1080/2080 synth modules. It also  
includes the sounds from the Session wave  
expansion board, and a slot for installing an  
additional SR-JV80 Series expansion board of your  
choice. Features include:  
The JV-1010 contains four demo songs that  
demonstrate its internal sounds and effects. Use the  
following procedure to listen to the demo songs:  
1. Turn the CATEGORY/BANK knob to select  
DEMO.  
2. Turn the VALUE knob to select the desired song.  
3. Press the VALUE knob or the VOLUME knob  
start demo song playback. Press either knob  
again to stop playback.  
Compact half-rackspace, expandable synth  
module with 64-voice polyphony  
Includes the complete sound set of the  
JV-1080/2080 sound modules, plus the sounds  
from the Session expansion board (1023  
patches before expansion)  
Selecting Patches  
The JV-1010 contains over 1,000 built-in sounds.  
Use the following procedure to select a patch:  
1. Press the VALUE knob to select Patch mode  
Expansion slot for installing one of sixteen  
additional SR-JV80 Series Wave Expansion  
boards  
(PATCH).  
Intuitive knob-style control and straightforward  
interface  
Dedicated reverb and chorus effects, plus 40  
built-in effect algorithms such as distortion and  
rotary simulation  
2. Turn the CATEGORY/BANK knob to select the  
desired bank.  
3. Turn the VALUE knob to select the desired  
patch.  
Try these patches:  
Phrase Preview button and Category Bank Select  
knob make it easy to find the patches you want  
General MIDI compatible  
Includes Emagic SoundDiver software for  
patch editing  
User: No. 017 Adrenaline  
Preset-A: No. 023 PsychoRhodes  
Preset-B: No. 052 Blade Racer  
Preset-E: No. 095 Dimensional  
Session: No. 182 DCO Sweeper.  
Initialize  
Using the Category Function  
This function resets the settings of the patch,  
performance, and rhythm sets to the factory default  
settings. Use the following procedure to initialize the  
JV-1010:  
The Category function allows you to search for  
patches based on instrument type. Use the following  
procedure to select a patch by category:  
1. Press the VALUE knob to select Patch mode  
1. Press VALUE knob to switch to a mode other  
than the patch mode.  
(PATCH).  
2. Turn the CATEGORY/BANK knob to select a  
2. Hold down the VOLUME knob and press the VALUE  
knob.  
category.  
3. Turn the CATEGORY/BANK knob to select  
PIANO (Factory Reset).  
3. Turn the VALUE knob to select the desired  
patch.  
4. Press the VALUE knob to display “Sur.”  
5. Press the VALUE knob to initialize the JV-1010.  
TBS98  
© 1999 Roland Corporation U.S., 5100 S. Eastern Ave., Los Angeles CA 90040  
Faxback # 20094  
Page 1  
 

Python Automobile Alarm Model 902 User Guide
RCA Portable DVD Player DRC99370 User Guide
Remington Styling Iron S 2004 User Guide
Renesas Network Card REG10J0049 0200 User Guide
RGB Spectrum Cable Box LES290A User Guide
Ricoh Printer SP C440DN User Guide
Rockford Fosgate Stereo Amplifier PUNCH100 User Guide
Runco Home Theater Screen VX 8D User Guide
Samsung Tablet GT P7510MAVXAB User Guide
Sears Lawn Mower 917372301 User Guide