P1L – P2L – P3L - LOADED ENCLOSURES
SVC - SINGLE VOICE COIL SUBWOOFERS
P1L 10" 12"
Single P1L-1X10 P1L-1X12
Dual P1L-2X10 P1L-2X12
DVC - DUAL VOICE COIL SUBWOOFERS
P2L 10" 12"
Single P2L-1X10 P2L-1X12
Dual
P2L-2X10 P2L-2X12
P3L
10" 12"
Single P3L-1X10 P3L-1X12
Dual
P3L-2X10 P3L-2X12
Installation & Operation
Serial Number:
Date of Purchase:
SPECIFICATIONS
FEATURES
P1L-1X10
Single 10" SVC
Speaker Features - P1L - SVC (Single Voice Coil)
• High modulus closed conical polypropylene cone.
Nominal Impedance (Ohms)
Replacement Model
4 Ω
P1S410
• Tear & fatigue resistant poly-cotton spider.
Power Handling (Watts)
Overall Dimensions (HxWxD)
150 RMS / 300 Max
13.125” x 17.0” x 15.75”
(33.3cm x 43.2cm x 40.0cm)
• High density compressed half-roll sealed poly-foam surround.
• High temp voice coil with spun-laced Nomex™ insulating
re-inforcment collar.
• Optimized motor magnetics with extended pole and bumped backplate.
• Sturdy 16 guage compound bend frame geometry.
P1L-2X10
Nominal Impedance (Ohms)
Replacement Model
Power Handling (Watts)
Overall Dimensions (HxWxD)
Dual 10" SVC
4 Ω
• Proprietary spider venting/cooling technique.
P1S810 (wired internally)
300 RMS / 600 Max
13.125” x 31.125” x 15.75”
(33.3cm x 79.1cm x 40.0cm)
Speaker Features - P2L & P3L - DVC (Dual Voice Coil)
• Venturi-effect center pole dispersion venting/cooling system.
• High modulus closed conical polypropylene cone andABS/Acrylic dustcap
assembly geometry.
P1L-1X12
Nominal Impedance (Ohms)
Replacement Model
Power Handling (Watts)
Overall Dimensions (HxWxD) 15.125” x 19.125” x 16.375”
(38.4cm x 48.6cm x 41.6cm)
Single 12" SVC
4 Ω
P1S412
150 RMS / 300 Max
• Tear & fatigue resistant poly-cotton spider.
• High density compressed half-roll sealed poly-foam surround.
• High temp voice coil with spun-laced Nomex™ insulating
re-inforcment collar.
• Optimized motor magnetics with extended pole and bumped backplate.
• Double stack ferrite magnet structure.
P1L-2X12
Dual 12" SVC
Nominal Impedance (Ohms)
Replacement Model
Power Handling (Watts)
Overall Dimensions (HxWxD) 15.125” x 33.875” x 16.375”
(38.4cm x 86.0cm x 41.6cm)
4 Ω
• P2 – Sturdy 16 guage compound bend frame geometry.
• P3 – Rigid die-cast aluminium frame.
P1S812 (wired internally)
300 RMS / 600 Max
• Proprietary spider venting/cooling technique.
• Diamond cut cast aluminum motor cover for improved heat dissipation.
P2L-1X10
Single 10" DVC
P3L-1X10
Single 10" DVC
Nominal Impedance (Ohms)
Replacement Woofer
Power Handling (Watts)
Overall Dimensions (HxWxD)
4 Ω
Nominal Impedance (Ohms)
Replacement Model
Power Handling (Watts)
Overall Dimensions (HxWxD)
4 Ω
P2D210 (wired internally)
250 RMS / 500 Max
13.125” x 17.0” x 15.75”
(33.3cm x 43.2cm x 40.0cm)
P3D210 (wired internally)
400 RMS / 800 Max
13.125” x 17.0” x 15.75”
(33.3cm x 43.2cm x 40.0cm)
P2L-2X10
Dual 10" DVC
P3L-2X10
Dual 10" DVC
Nominal Impedance (Ohms)
Replacement Woofer
Power Handling (Watts)
Overall Dimensions (HxWxD)
4 Ω
Nominal Impedance (Ohms)
Replacement Model
Power Handling (Watts)
Overall Dimensions (HxWxD)
4 Ω
P2D410 (wired internally)
500 RMS / 1000 Max
13.125” x 31.125” x 15.75”
(33.3cm x 79.1cm x 40.0cm)
P3D410 (wired internally)
800 RMS / 1600 Max
13.125” x 31.125” x 15.75”
(33.3cm x 79.1cm x 40.0cm)
P2L-1X12
Single 12" DVC
P3L-1X12
Single 12" DVC
Nominal Impedance (Ohms)
Replacement Model
Power Handling (Watts)
4 Ω
Nominal Impedance (Ohms)
Replacement Model
Power Handling (Watts)
4 Ω
P2D212 (wired internally)
250 RMS / 500 Max
P3D212 (wired internally)
500 RMS / 1000 Max
Overall Dimensions (HxWxD) 15.125” x 19.125” x 16.375”
(38.4cm x 48.6cm x 41.6cm)
Overall Dimensions (HxWxD) 15.125” x 19.125” x 16.375”
(38.4cm x 48.6cm x 41.6cm)
P2L-2X12
Dual 12" DVC
P3L-2X12
Dual 12" DVC
Nominal Impedance (Ohms)
Replacement Model
Power Handling (Watts)
4 Ω
Nominal Impedance (Ohms)
Replacement Model
Power Handling (Watts)
4 Ω
P2D412 (wired internally)
500 RMS / 1000 Max
P3D412 (wired internally)
1000 RMS / 2000 Max
Overall Dimensions (HxWxD) 15.125” x 33.875” x 16.375”
(38.4cm x 86.0cm x 41.6cm)
Overall Dimensions (HxWxD) 15.125” x 33.875” x 16.375”
(38.4cm x 86.0cm x 41.6cm)
Specifications subjct to change without notice
LIMITED WARRANTY INFORMATION
Rockford Corporation offers a limited warranty on Rockford Fosgate products on the following terms:
Length of Warranty
Speakers – 1Year. Any Factory Refurbished Product – 90 days (receipt required)
What is Covered
This warranty applies only to Rockford Fosgate products sold to consumers by Authorized Rockford Fosgate Dealers in the
United States of America or its possessions. Product purchased by consumers from an Authorized Rockford Fosgate Dealer in
another country are covered only by that country’s Distributor and not by Rockford Corporation.
Who is Covered
This warranty covers only the original purchaser of Rockford product purchased from an Authorized Rockford Fosgate Dealer
in the United States. In order to receive service, the purchaser must provide Rockford with a copy of the receipt stating the
customer name, dealer name, product purchased and date of purchase.
Products found to be defective during the warranty period will be repaired or replaced (with a product deemed to be
equivalent) at Rockford's discretion.
What is Not Covered
1. Damage caused by accident, abuse, improper operations, water, theft, shipping
2.Any cost or expense related to the removal or reinstallation of product
3. Service performed by anyone other than Rockford or an Authorized Rockford Fosgate Service Center
4.Any product which has had the serial number defaced, altered, or removed
5. Subsequent damage to other components
6.Any product purchased outside the U.S.
7.Any product not purchased from an Authorized Rockford Fosgate Dealer
Limit on Implied Warranties
Any implied warranties including warranties of fitness for use and merchantability are limited in duration to the period of the
express warranty set forth above. Some states do not allow limitations on the length of an implied warranty, so this limitation
may not apply. No person is authorized to assume for Rockford Fosgate any other liability in connection with the sale of the
product.
How to Obtain Service
Contact the Authorized Rockford Fosgate Dealer you purchased this product from.
If you need further assistance, call 1-800-669-9899 for Rockford Customer Service.You must obtain an RA# (Return
Authorization number) to return any product to Rockford Fosgate.You are responsible for shipment of product to Rockford.
EU Warranty
This product meets the current EU warranty requirements, see your Authorized dealer for details.
Rockford Fosgate
Rockford Corporation
600 South Rockford Drive
Tempe,Arizona 85281 U.S.A.
In U.S.A., (480) 967-3565 - Customer Service 1-800-669-9899
2009 Rockford Corporation.All rights reserved.
12/2008 B.M.
Rockford Fosgate, the Rockford Fosgate logo, and the PUNCH logo are either
12/2008 E.R.
1230-55461-01
registered trademarks or trademarks of Rockford Corporation.
Printed in China
|