Package contents
System requirements
•
•
•
•
Rocketfish USB 2.0 4-port hub
A-to-mini-B USB cable
Suction cup
•
•
One available USB port
Operating system: Windows 7,
Windows Vista, Windows XP, or
Mac OS X v10.2.8 or above
Quick Setup Guide
Features
•
•
•
•
•
•
•
•
•
•
Attach up to four USB devices to your computer
One port for connecting to your computer
Four enhanced, high-speed, USB 2.0 480 Mbps ports
Compatible with USB 1.1 and USB 2.0 devices
Data transfer rates of 1.5 Mbps, 12 Mbps, and 480 Mbps
Plug-and-Play installation
USB 2.0 4-Port Hub
Installation Instructions
Three power status LED indicators
Convenient attachment to any smooth surface with provided suction cup
USB Implementers Forum (USB-IF) certification
Can purchase (not included) AC power adapter 5V 2.1A
Power connector
Upstream port
Downstream port
Downstream port
Downstream port
Downstream port
LED indicator lights
Using the USB hub
1
Plug the mini-B USB end of the cable into the upstream port, then plug the
USB-A end into an available USB port on your computer.
Note: If you use a USB 1.1 port on your computer, all devices connected to
your USB hub will run at the slower USB 1.1 speed.
Plug USB devices into any of the four downstream ports.
2
3
Plug the AC adapter (optional) into a power outlet, then plug the DC
connector into the DC power jack on the USB hub. When your USB hub is
receiving power, the blue LED lights on the hub base turn on.
Note: The hub can be used without the power supply when connected
devices draw a total of 100mA of current or less. If you are unsure of the total
RF-NBSKHBP/RF-NBSKHBG/
RF-NBSKHBGR/RF-NBSKHBB
QUICK SETUP GUIDE
connected current, use the power supply.
|