Radio Shack Smoke Alarm 49 2010 User Guide

49-2020.fm Page 1 Wednesday, August 18, 1999 :57 PM  
Cat. No. 49-2020  
OWNER’S MANUAL  
Please read before using this equipment.  
Smoke Alarm  
Siren Detector  
for use with the SAFE HOUSE  
Wireless Alarm System  
(Cat. No. 49-2010/49-2011)  
 
49-2020.fm Page 3 Wednesday, August 18, 1999 :57 PM  
Notes:  
The siren detector does not  
detect smoke. It only detects the  
sound from a smoke alarm.  
We suggest you use a Radio  
Shack Cat. No. 49-466 Smoke  
Alarm with the siren detector.  
Other smoke alarms might not  
work properly.  
Be sure you test the siren detec-  
tor as described under “Testing”  
on Page 12.  
3
 
49-2020.fm Page 4 Wednesday, August 18, 1999 :57 PM  
This device complies with Part 15 of  
FCC Rules. Operation is subject to  
the following two conditions: (1) the  
device may not cause harmful inter-  
ference, and (2) the device must  
accept any interference received,  
including interference that may  
cause undesired operation.  
4
 
49-2020.fm Page 5 Wednesday, August 18, 1999 :57 PM  
INSTALLATION  
INSTALLING THE  
BATTERY  
1. Slide off the battery compartment  
cover.  
2. Connect a 9-volt alkaline battery  
(Cat. No. 23-553) to the battery  
connector. Then place the bat-  
tery in the compartment.  
illustration  
5
 
49-2020.fm Page 6 Wednesday, August 18, 1999 :57 PM  
3. Replace the battery compart-  
ment cover.  
Note: Changing the detector’s bat-  
tery sometimes triggers the fire  
alarm. If this happens, turn off the  
alarm system then turn it on again.  
6
 
49-2020.fm Page 7 Wednesday, August 18, 1999 :57 PM  
CONNECTING TO THE  
SYSTEM  
Follow these steps to add the siren  
detector to your alarm system.  
1. Press LEARN on the system’s  
base. The LEARN indicator  
flashes.  
illustration  
2. Enter your access code on the  
base’s keypad. The LEARN indi-  
cator lights and the next avail-  
able zone’s indicator flashes.  
7
 
49-2020.fm Page 8 Wednesday, August 18, 1999 :57 PM  
3. Press TEST on the siren detector.  
The system stores the detector’s  
settings in the next available  
zone, lights the zone’s indicator,  
and sounds a brief tone.  
Note: To assign the siren detec-  
tor to a zone other than the next  
available zone, enter the desired  
zone number. For example, to  
assign the detector to Zone 5,  
press 05. Then press TEST on  
the detector.  
8
 
49-2020.fm Page 9 Wednesday, August 18, 1999 :57 PM  
MOUNTING THE  
DETECTOR  
To ensure the siren detector de-  
tects the smoke alarm when it  
sounds, mount the detector 4–6  
inches from a UL-approved smoke  
alarm (Cat. No. 49-466).  
Follow these steps to mount the de-  
tector.  
1. At the desired mounting location,  
drill two holes 13/4 inches apart,  
one above the other.  
9
 
49-2020.fm Page 10 Wednesday, August 18, 1999 2:57 P
2. Thread the supplied screws into  
the holes until each screw’s head  
1
extends about /4 inch from the  
wall.  
3. Line up the keyhole slots on the  
detector with the screws on the  
mounting location, then slide the  
detector down onto the screws  
until it is secure.  
After you mount the siren detector,  
be sure you test it as described un-  
der “Testing” on Page 12.  
10  
 
49-2020.fm Page 11 Wednesday, August 18, 1999 2:57 P
Notes:  
The siren detector can also  
detect other loud sounds (ste-  
reos, musical instruments, and  
so on). Be sure you mount the  
detector in a location that mini-  
mizes false alarms.  
If the battery is not installed, the  
red safety tab inside the detector  
prevents you from mounting the  
detector.  
11  
 
49-2020.fm Page 12 Wednesday, August 18, 1999 2:57 P
TESTING  
To test the siren detector, hold  
down the smoke alarm’s test button  
until its siren sounds. The indicator  
on the siren detector flashes briefly  
and the base sounds an alarm.  
CANCEL  
Press  
on the base to si-  
lence the base’s alarm.  
Notes:  
You might have to hold down the  
smoke alarm’s test button for as  
long as 15 seconds. The siren  
detector has a delay function to  
help prevent false alarms.  
We suggest you perform this test  
once a week to be sure the siren  
detector operates properly.  
12  
 
49-2020.fm Page 13 Wednesday, August 18, 1999 2:57 P
UNINSTALLING  
Follow these steps to remove the  
siren detector.  
LEARN  
1. Press  
on the base. Then  
enter your access code.  
illustration  
2. Enter the zone number for the  
siren detector. The correspond-  
ing zone indicator flashes.  
CANCEL  
3. Press  
on the base while  
the indicator flashes. The indica-  
tor turns off.  
CANCEL  
4. Press  
again.  
13  
 
49-2020.fm Page 14 Wednesday, August 18, 1999 2:57 P
NOTES  
14  
 
49-2020.fm Page 15 Wednesday, August 18, 1999 2:57 P
15  
 
49-2020.fm Page 16 Wednesday, August 18, 1999 2:57 P
Radio Shack Limited Warranty  
This security product is warranted against manufacturing  
defects in material and workmanship for ninety (90) days from  
the date of purchase from Radio Shack company owned stores  
and authorized Radio Shack franchisees and dealers. Within  
this period Radio Shack will repair the security product without  
charge for parts and labor. Simply bring your Radio Shack  
sales slip as proof-of-purchase date to any Radio Shack store.  
This warranty does not cover damage or failure caused by or  
attributable to Acts of God, abuse, misuse, improper or abnor-  
mal usage, faulty installation, improper maintenance, lightning  
or other incidence of excess voltage, or any repairs other than  
those provided by a Radio Shack Authorized Service Facility, or  
transportation costs. Radio Shack is not responsible or lia-  
ble for indirect, special, or consequential damages arising  
out of or in connection with the use or performance of the  
product or other damages with respect to loss of property,  
loss of revenues or profit, or costs of removal, installation  
or reinstallation.  
EXCEPT AS PROVIDED HEREIN, RADIO SHACK MAKES  
NO EXPRESS WARRANTIES AND ANY IMPLIED WARRAN-  
TIES ARE LIMITED IN DURATION TO THE DURATION OF  
THE WRITTEN LIMITED WARRANTIES CONTAINED  
HEREIN. Some states do not allow the limitation or exclusion of  
incidental or consequential damages and some states do not  
allow limitation or exclusion of implied warranties; therefore, the  
aforesaid limitation(s) or exclusion(s) may not apply to the pur-  
chaser. There will be charges rendered for repairs to the prod-  
uct made after the expiration of the aforesaid ninety (90) day  
warranty period.  
This warranty gives you specific legal rights and you may have other  
rights which vary from state to state.  
10/95  
We Service What We Sell  
RADIO SHACK  
A Division of Tandy Corporation  
Fort Worth, Texas 76102  
2A7  
Printed in China  
 

RCA Flat Panel Television 1665105B User Guide
RCA Universal Remote RCR504BR User Guide
ResMed Video Gaming Accessories POWER STATION II User Guide
Rollei Digital Camera Dk4010 User Guide
Runco Projector DR 300c User Guide
Samsung Computer Hardware PCA 6189 User Guide
Samsung Network Hardware SBBAD7 User Guide
Samsung Washer SW51ASP User Guide
Sanyo Air Cleaner ABC VW24A User Guide
Screenlife Video Games Star Trek User Guide