RSA Lighting Indoor Furnishings SP97 User Guide

DESCRIPTION  
Catalog #  
Project  
Type  
Date  
An adjustable Multi-lamp Recessed fixture for trimless installation suitable for  
downlighting and accent applications. Utilizes FOUR (4) PAR20 120V lamps.  
For new construction applications. Insulation must be kept 3” from all sides  
and at least 1” above the housing.  
Comments  
Prepared by  
SPECIFICATION FEATURES  
A... Housing  
branch wiring, 6 #12 90º C supply  
is secured with threadless, bayonet ac-  
tion. Optional retractable arm is available  
Housing, junction box & trimless  
meshplate assembly are all steel  
conductors or 60º C for end of run. The  
COMBOLIGHT®  
Next Generation  
Recessed  
fixture is also UL listed as ‘access above for lamp pulldown and extreme aiming.  
construction. Perforated meshplate allows ceiling not required’.  
for trimless installation in drywall/plaster  
Includes Med. base sockets.  
ceilings by allowing the ceiling’s mudding  
compound to be applied right up to the  
edge of the fixture opening. Includes  
a beveled “knife-edge” lips to ensure a  
clean edge. Can accommodate 0.50” to  
1.25” ceiling thickness. Optional Chicago  
Plenum configuration available.  
D... Electrical  
F ... Mounting  
Electrical accessible through ceiling  
opening. J-Box located on the side  
wall of the housing behind removable  
access doors. Electrical components on  
individually removable “trays” for easy  
maintenance.  
Butterfly Brackets accept 1/2” EMT,  
C Channel, Tbar fasteners, and bar  
hangers. Four tabs on housing for  
securing to structure. Perforated flaps  
along housing sides for securing trimless  
insert to fixture and drywall.  
Multi-Lamp Fixture  
Four (4) Light  
PAR20 120V  
G... Labels  
B... System Protection:  
E ... Lamps  
cULus listed for non-type IC  
applications, suitable for use in damp  
locations.  
Thermal protection provided to guard  
against overheating and misuse of  
insulation over and around fixture. Vent  
Four (4) PAR20 120V lamps mounted in  
adjustable double gimbals. Lamp holders  
are individually removable and may be re-  
New Construction  
Housing  
holes in housing provide cooler operation. gressed 1” for additional cut-off. Lamp can  
Ceiling Cut-Out: 5.44” x 19.38”  
accept up to three optical accessories (i.e.  
Trimless  
C... Junction Box  
Junction Box is UL listed for through  
lens + hex louver + snoot). 45º x 45º locking  
lamp adjustment. Beveled-edge lamp ring  
33.21”  
15.01”  
7.45”  
10.96”  
29.08”  
18.58”  
Double  
Gimbal  
4.64”  
45º x 45º  
Adjust  
4.65”  
Perforated  
Meshplate  
Thermal  
Protector  
Integral Electronic  
Metal Halide Ballasts  
For use with PAR20 120V lamps 50W max.  
ORDERING INFORMATION  
C4  
N
120  
N
N
Configuration  
Lamp Type / Wattage Label  
Primary Voltage  
1
= 120V  
Lamp Mechanism  
Trim Insert Finish  
C4 = COMBOLIGHT  
Recessed Four (4) Light  
050P20 = 50 Watt max. PAR20 120V  
G = Double Gimbal  
N = Trimless  
R
= Retractable Double Gimbal  
Housing  
Power Supply  
N = None - Line Voltage Lamp  
Trim Insert  
Housing Interior/Electrical Door/Sleeve  
N = New Construction  
N = Trimless  
Finish  
C = Chicago Plenum  
W = White  
B
S
= Black  
= Industrial Silver  
rev 022408  
Specifications and Dimensions subject to change without notice.  
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031  
 

RCA Fan DHT235AB User Guide
Renesas Computer Hardware M32173T PTC User Guide
Renesas Network Card PCA7426G02 User Guide
Roland Drums TR 66 User Guide
Rotel CD Player RCD 945AX User Guide
Salton Coffee Grinder FAC500G User Guide
Samsung Home Theater System HTH4500 User Guide
Samsung Projection Television HCM4215W User Guide
Schumacher Battery Charger 00 99 000835 User Guide
Sears Portable Generator 20071987 User Guide