v2.0 (EN)
Viewing videos on TV
Recording quality
Turn on/off
Play
Setting date and time
1. Press or to shift among month, date, hour and minute and press + or – to set the
date/time values.
2. Press or to select DONE and then press the red RECORD button to save settings. Or
press DELETE to exit without saving.
LCD screen
For self recordings, the lens can be
rotated 180o.
1. Plug in the AV cable (provided) – Insert the single connector
end into the camcorder (AV jack) and connect the double
connector ends to the corresponding video (yellow) and audio
(white) input jacks on the TV. (TV output standard: NTSC)
1. Press ON/OFF to turn on.
2. Press and hold ON/OFF to turn off.
1. Press PLAY/PAUSE to start playback of the most recent recording or the selected video.
To select another video, refer to Selecting videos.
2. Press and hold PLAY/PAUSE for three seconds to play all videos.
Settings
Quality
HD
Approx. recording duration*
60 minutes
QuickStartGuide
EZ300HD RCA Small Wonder Camcorder
•
Camcorder will automatically turn off after 2 minutes if not in use.
HD (High Definition mode)
HQ (High Quality mode)
webQ (Web Quality mode)
•
If no video is selected after playback has finished, recording mode will resume after 5 seconds.
DVD
120 minutes
Video quality selector
•
For best output quality, use the HDMI connector at the
bottom of the camcorder with an HDMI cable (not included).
•
Date and time setting can be accessed by pressing and holding PLAY/PAUSE and ON/OFF
together while the camcorder is turned off.
Refer to Recording Quality for more information.
Search forward/backward:
Good
360 minutes
Congratulations on purchasing your new RCA High Definition Small Wonder Camcorder.
Please read these instructions for quick tips on using the product.
•
•
Hold down to fast forward the selected video during playback.
Hold down to fast rewind the selected video during playback.
2. Turn on the TV and the camcorder.
3. Switch the TV to the selected video input (refer to your TV manual for instructions).
4. You may play and delete videos viewed on the TV by using the camcorder buttons.
•
•
The selected setting (HD, HQ or webQ) appears on the display screen during recording.
The HD setting is recommended when planning to view video on a TV directly from the
camcorder.
Record
Using your camcorder
Press and release the red RECORD button (after
“READY”appears on the screen) to begin recording.
Getting started
Pausing video playback:
Microphone
Charging the battery
* Recording duration is based on 2 GB internal memory. Actual recording capacity depends on type of video content being recorded.
•
Press PLAY/PAUSE to pause playback (a pause indicator II and the remaining playback
time flash at the top left corner of the screen).
Please charge the battery for at least 3 hours before first use. The battery can only be charged
with the supplied battery charger. Refer to Battery charger on the back of this guide for more
information.
Recording videos to VHS tape or DVD
While recording:
1. Plug in the AV cable (provided) – Insert the single connector end into the camcorder and
connect the double connector ends to corresponding video (yellow) and audio (white)
inputs of the recording device (VHS or DVD recorder).
•
A red and the elapsed time appears at the top
left corner of the screen.
•
Press PLAY/PAUSE again to resume playback.
USB Connector ARM
Recording
indicator
Extending the USB Connector ARM:
1. Press down on the USB Connector ARM
button.
•
The red recording light on the camcorder front
turns on.
Selecting videos:
Battery and memory card installation
1. Slide the cover down and then lift up to open.
2. Install the rechargeable lithium battery.
•
For best output quality, use the HDMI connector at the bottom of the camcorder with an
HDMI cable (not included).
Bottom view
•
•
Press and release to cue the next video.
Press and release to cue the previous video.
2. Slide out to extend the Connector ARM.
2. Turn on the camcorder and the recording device.
3. Switch recording device to the video input connected to the camcorder. (Refer to your
user manual of the recording device for instructions).
Pausing a recording:
•
•
Refer to “Connecting to a PC” for more information.
Use USB Extension Cable (provided) if USB Connector ARM is
obstructed or space does not permit connection to PC.
To retreat the ARM, press down on the USB Connector ARM
button and slide in.
Lens
2
•
•
Make sure you insert the battery correctly as indicated.
1
•
•
Press PLAY/PAUSE.
Delete
In the case of low battery, a low battery icon (
flashing.
) will flash on the screen. Please recharge the battery when battery icon is
A pause indicator II replaces the red at the top
left corner and “Recording Paused” flashes in the
middle of the screen.
1. Press DELETE and the last recording and “DELETE VIDEO ?” appear on the screen.
•
4. Start recording of your recording device and press and hold PLAY/PAUSE on the
•
To select another video, refer to Selecting videos.
3. Your camcorder has 2 GB internal memory. To boost the memory, install an SD memory
card. Align card with Card Symbol on camcorder and slide in until a click is heard. The card
icon ( ) appears on the screen with memory card inserted.
camcorder for 3 seconds to play all videos on the camcorder.
2. Press and hold DELETE until the selected video is deleted.
Macro mode
•
To resume recording, press and release PLAY/
PAUSE again.
3. To delete all videos, press & hold DELETE for 3 seconds and then repeat step 2.
Select the flower icon to
take close-up shots
AV output
•
•
When the internal memory is full, recording will stop. Press the record button again to begin recording to the SD card.
To remove card, push card in until a click is heard and the card will pop out slightly, then remove the card.
HDMI video output
Lift up the cover to show the
connector.
Tripod screw
mount
Audio/Video output for connecting to TV or
other AV equipment with the included AV cable.
Take photo
4. Push the cover down and slide up to close.
Stop
•
Press and release PHOTO to take photo (photo resolution: 5.0 mega pixels).
•
Refer to “Viewing videos on TV” and “Recording videos to VHS
tape or DVD” for more information.
While playing or recording, press and release the red
RECORD button to stop the playing or recording.
Right view
2
1
3
4
Back view
Zoom
Volume
During playback:
Battery and memory card cover
Before or during recording:
Front view
Audio speaker
Hand strap hole
•
•
Press + to zoom in.
Press – to zoom out.
•
•
Press + to increase volume.
Press – to decrease volume.
Back view of
the battery
|