USER‘S
GUIDE
RP-7983/RP-7984
PORTABLE STEREO SYSTEM
Two Products
One User’s Guide
Where to Start
RP-7983 – no remote
RP-7984 – with remote
Owning an RCA portable stereo system is like having a
component stereo that you can take with you just about
anywhere, giving you flexibility and convenience (not to
mention great sound).
This instruction book covers
two different models. Please
note the model number of your
unit; the RP-7984 has a remote
control and the RP-7983
doesn’t have one. If you have a
remote control, please read the
Remote Control section on
page 11.
Looking for a Good Read?
You won’t find this instruction book on the best seller list, but
it does contain a lot of information that you should know
before using your portable stereo.
I know that you want to use your stereo, not read about it, but
you really should read the section, “First Things First,” to make
sure you get it hooked up correctly; then, as you have time, you
can read about all of the great features of this stereo.
If you have any questions, be sure to check the Troubleshooting
Tips section, the Index, or the Table of Contents to help you find
the answer.
Table of Contents
First Things First ...................................................2
Powering Up ........................................................................... 2
Speaker Hookup.................................................................... 2
headphones ........................................................................... 3
antennas................................................................................. 3
General Controls ............................................................... 3
the display .............................................................................. 4
Using the Radio...................................................... 5
Using the CD Player ..............................................6
Loading and Playing Discs .............................................7
Shuffling Play Order .........................................................7
Repeating Play Order .........................................................7
Programming Play Order .............................................. 8
Using the Cassette Deck ......................................9
Playing Cassette Tapes ...................................................... 9
Recording on Cassette Tapes ...................................... 10
The Remote control (RP-7984 Only) ............. 11
Care and Maintenance .................................... 13
Troubleshooting Tips ....................................... 14
Index ......................................................................... 15
WARRANTY ............................................................... 16
First Things First
RECORD
PLAY
REWIND
F
FORWARD
STOP/EJECT
PAUSE
Before you start, you to need to know a couple of things.
MULTI FUNCTION DISPLA
Y
S
T
C
E
D
R
E
O
REPEAT
1
A
L
L
P
R
O
G
R
A
M
S
H
U
F
F
L
E
P
L
A
Y
P
A
U
S
E
F
M
k
H
z
TA
P
E
A
M
z
T
R
A
C
K
M
W
S
RADIO
P
E
E
E
K
M
U
T
E
V
O
L
U
M
S
C
A
N
R
O
C
K
J
A
Z
Z
V
O
C
A
L
F
L
AT
VOLUME
TUNING
PHONES
CD
BAND
SEEK/SCAN FM MONO
TUNER PRESETS
Digital EQ
RADIO
TAPE
1
3
5
2
4
M
PLAY/PAUSE
TRACK/
SEARCH
S
H
U
F
F
L
E
R
E
P
E
A
T
PROGRAM
STOP
Powering Up
OPEN
This portable stereo operates on battery or AC power.
Battery Power
VOL
MUTE
VOL
Insert 8 D-sized alkaline batteries into the battery
compartment as shown the back of the main unit,
and you can take your stereo just about anywhere.
POWER
FUNCTION
DIG EQ
CUST EQ
PRESET
BAND
AC Power
SEEK• SCAN
T
RACK• UNE
T
Plug the power supply cord into the AC power jack on the
back of the unit and into an AC power outlet that accepts the
polarized plug (one blade wider than the other).
SHUFFL
E
REPEAT
STOP
PLAY• PAUSE
AC power supply cord
Remote Control
RP-7984 ONLY
RIGHT SPEAKER
LEFT SPEAKER
Speaker Hookup
–
+
+
–
To speaker terminals on main cabinet back:
1. Press down on the tab to open the red terminal and insert
the red wire (+) into the terminal.
2. Press down on the tab to open the black terminal and
insert the black wire (–) into the terminal.
3. Ensure left speaker wires are connected to left speaker
terminal and right speaker wires are connected to right
speaker terminal.
Black
wires
Detaching the Speakers from main unit
1. Disconnect the speaker wires from the main cabinet
terminals.
WARNING:
Be sure to follow the speaker hookup
instructions carefully; the system can
be damaged if speakers are
2. Press on the tab securing the speaker to the base unit and
then slide the speaker up until it comes off of the unit.
3. Reattach the speaker wires to main cabinet speaker
terminal as described in “Speaker Hookup.”
improperly connected.
Attaching Speakers to the main cabinet
1. Slide the speaker down the side rail on cabinet side.
2. Speaker release tab locks in place.
2
Headphones
To listen to your stereo with headphones (not included), use
the 3.5 mm PHONES jack on the front of the unit. Make sure
that you turn down the volume before you put on the
headphones; then increase the volume to the desired level
after they are in place.
Antennas
Since the AM antenna is built in; adjusting the position of the
unit may help AM reception.
The FM whip antenna on the back of the unit can be
extended and rotated for better FM reception.
Power light
Volume
control
Power
button
General Controls
Function
Control
You’ve chosen a power source and hooked up the speakers.
Now you need to know about the buttons and controls that
are common to all components of the stereo: the radio, tape
deck and CD player.
Digital EQ
Display
MULTI FUNCTION DISPLAY
STEREO REPEAT
1
ALL PROGRAM SHUFFLE PLAY PAUSE
CD
FM
kHz
TAPE
AM
MHz
Power Button
TRACK
MW
SEEK
SCAN
RADIO
PRESET
MUTE VOLUME
ROCK JAZZ VOCAL FLAT
VOLUME
Press the POWER button to turn on the unit (the POWER light
on the front of the unit comes on). The display activates and
the system begins operating from the last sound source
used—the radio, the tape deck, or the CD player.
TUNING
PHONES
DISC
BAND
SEEK/SCAN FM MONO
Digital EQ
TUNER PRESETS
RADIO
TAPE
1
3
5
2
4
M
PLAY/PAUSE
TRACK/
SEARCH
SHUFFLE REPEAT PROGRAM
STOP
Function Control
OPEN
Press the Function Control to choose the function you want
to use: RADIO, DISC, or TAPE. Your selection is reflected in
the display.
Volume
Press VOLUME + (up) or – (down) to increase or decrease the
volume level.
preset Digital EQ
The Digital EQ button controls the preset equalizer settings.
The display always shows the current preset EQ setting.
Keep pressing and releasing the Digital EQ button until the
preset setting you want (ROCK, JAZZ, VOCAL, or FLAT)
appears in the display.
3
The Liquid crystal Display
MULTI FUNCTION DISPLAY
STEREO REPEAT
1
ALL PROGRAM SHUFFLE PLAY PAUSE
CD
FM
kHz
TAPE
AM
MHz
TRACK
MW
RADIO
PRESET
MUTE VOLUME
SEEK
SCAN
ROCK JAZZ VOCAL FLAT
VOLUME
TUNING
PHONES
DISC
BAND
SEEK/SCAN FM MONO
TUNER PRESETS
Digital EQ
Don’t Worry...It Won’t Bite
RADIO
TAPE
1
3
5
So you think the display looks
intimidating. Don’t worry, you
won’t see all of this stuff at the
same time—you’ll only see what
you need to see.
2
4
M
PLAY/PAUSE
TRACK/
SEARCH
SHUFFLE REPEAT PROGRAM
STOP
OPEN
Note: the display is back lit for model
RP-7984 only.
Function
indicator
CD Mode indicators
REPEAT 1 ALL PROGRAM SHUFFLE PLAY PAUSE
RADIO
CD
FM
kHz
AM
MHz
STEREO
TAPE
FM Stereo indicator
Digital EQ indicator
TRACK
PRESET
SEEK
SCAN
Mute
indicator
MUTE VOLUME
FLAT ROCK VOCAL JAZZ
Tuner indicator:
SEEK/SCAN
indicator
• Radio station
Radio Band
indicator
• CD playing time
• Display Messages
Number indicator for:
• Preset radio stations
• Track
• Custom EQ band (RP-7984). See page 12.
• Volume level
• Custom EQ level (RP-7984). See page 12.
The following list of display information is presented in alphabetical order and corresponds to the items
in the preceding graphic.
CD Mode Indicators: Show the current CD function mode.
Digital EQ Indicator: Shows which preset option you have chosen
(ROCK, JAZZ, VOCAL, or FLAT).
FM Stereo Indicator: Displayed when you are receiving stations in FM Stereo mode. (The station must be
broadcasting in stereo as well.)
Function Indicator: Shows the current function (RADIO, DISC, or TAPE).
Mute: Displayed when you press MUTE on remote control (RP-7984 only) or when you set volume control
on the unit to 00 position.
Number Indicator: Depending on the current mode, shows the preset number for radio stations, the
track number of a CD, or displays the volume setting when adjusting the volume or custom EQ levels (RP-
7984 only).
Radio Band Indicator: Shows the current radio band.
SEEK/SCAN Indicator: SEEK or SCAN is displayed depending on which method of radio tuning you are
using.
Tuner Indicator: Shows information such as radio station frequency, CD playing time, and display
messages.
4
Using the Radio
Not only does the digital tuner help you tune in radio
stations more easily, it also lets you preset as many as
five AM and five FM radio stations for easy access.
MULTI FUNCTION DISPLAY
RADIO
FM
MHz
STEREO
PRESET
Tuning In Radio Stations
Digital EQ
After you choose the radio feature by pressing RADIO on the
Function Control, you can do the following:
TUNING
•
Press the BAND button to change the radio band to AM
or FM.
•
•
Press the TUNING buttons to change the radio station.
DISC
BAND
SEEK/SCAN FM MONO
TUNER PRESETS
To turn on the Seek feature, which locates the next
RADIO
TAPE
station, press and quickly release the SEEK/SCAN button.
1
3
5
•
•
To turn on the Scan feature which searches for stations,
press and momentarily hold the SEEK/SCAN button
before releasing it. When a station is found, the Scan
feature allows you to listen for a few seconds and then
moves to the next station. When you find a station you
like, press the SEEK/SCAN button again to choose that
station.
2
4
M
Playing Hide and Seek
Press the FM/MONO button to listen to FM stations in
either mono or stereo (STEREO appears in the display
when listening to FM stereo).
Sometimes the Seek and Scan features
might not locate an available station
because the signal is not strong
enough. If you know the frequency of
the station you’re looking for, you
might want to use the TUNING
buttons instead.
Note that AM stations are broadcast in mono only and
that the FM radio station must be transmitting in stereo
for you to receive it in stereo.
Storing Radio Stations in
Memory
Weak Reception?
Preset up to five AM and five FM stations for easy access.
If the reception of an FM station
transmitting in stereo is weak, the
STEREO indicator might fade in and
out. Adjusting the FM whip antenna
can help. If not, changing from FM
Stereo to FM Mono might improve
reception (just remember that you’ll
no longer be listening in stereo).
1. Choose the radio band and station.
2. Press
(the Memory Preset button). The PRESET
M
indicator and the station frequency blink in the display.
3. Press one of the five TUNER PRESETS buttons to store the
radio station frequency in that preset location.
Recalling Preset Stations
1. Choose the radio band (AM or FM).
2. Press the appropriate TUNER PRESETS button (the
PRESET number appears in the display).
5
Using the CD Player
Combined with features such as Shuffle, Repeat, and
Programmed play, you have lots of options for playing CDs.
Look for this Logo
You can play 3" and 5"
compact discs that have
this logo.
Knowing Your Buttons
The following buttons are used for basic CD operation:
PLAY/PAUSE
— This button works as a toggle switch:
press to begin play, press again to pause play.
TRACK/SEARCH
and
DISC
•
In Stop mode— Press to move to the beginning of the
preceding or following track.
RADIO
TAPE
•
In Play or Pause mode — Press and release to move to
the beginning of the preceding or following track. Press
and hold to search within a track.
PLAY/PAUSE
TRACK/
SEARCH
SHUFFLE REPEAT PROGRAM
STOP
STOP
— Press to stop play.
OPEN
The Display
When the power is on, the display tells you what’s going on
with your system. (See “Display” section, page 4)
CD Display Messages
The following messages appear in the display to tell you what the CD
player is doing:
Message
Meaning
DISC (CD) function is active. (Note:
CD drawer is in (closed).
CD drawer is out (open).
is an icon)
No disc is in the tray or the disc is damaged or
unreadable.
REPEAT
1
ALL
SHUFFLE PLAY
No tracks are programmed (applies to Program
mode).
Program is full (applies to Program mode). This is
displayed for three seconds when the last track is
programmed.
Program has been cleared (erased) from memory
(applies to Program mode).
Reading CD’s table of contents (how many tracks
it has and the total time for the disc). This
information is displayed in Stop mode.
6
Play mode indicator
Loading and Playing CDs
1. Select the CD function by pressing DISC on the Function
Control.
REPEAT 1 ALL
SHUFFLE PLAY PAUSE
CD
2. Press the OPEN
button to open the CD drawer.
TRACK
VOCAL
3. Place a CD into the tray with the label facing up.
4. Press the OPEN
button again to close the CD drawer.
to begin play.
5. Press PLAY/PAUSE
6. Press STOP
to stop disc play.
The current track number and the elapsed time of the track
appear in the display while the track is playing.
Shuffle mode indicator
Shuffling Play Order
Turning on the Shuffle feature causes the tracks to play in a
random order.
SHUFFLE PLAY
CD
TRACK
VOCAL
•
Press the SHUFFLE button to start random track play.
(The Shuffle mode indicator appears in the display while
the feature is active.)
You Can’t Shuffle a Program
•
Press the SHUFFLE button a second time to turn off the
feature.
The Shuffle feature is not available
during Program mode. If you press
SHUFFLE while in Program mode, the
CD player will exit the program and
start “shuffling” (playing tracks in
random order).
Repeating Play Order
REPEAT 1 ALL
CD
Use the REPEAT button to repeat one track or an entire CD.
TRACK
•
•
•
Press the REPEAT button once to repeat the current track
(REPEAT 1 appears in the display).
VOCAL
Press REPEAT a second time to repeat all tracks (REPEAT
ALL appears in the display).
REPEAT 1 ALL
Press REPEAT a third time to turn off the feature.
CD
In Shuffle mode:
•
Press the REPEAT button once to repeat the current track
(REPEAT 1 appears in the display).
TRACK
VOCAL
•
Press REPEAT a second time to repeat all tracks in a
different shuffle order (REPEAT ALL appears in the
display).
•
Press REPEAT a third time to turn off the feature.
In Program mode:
•
•
•
Press the REPEAT button once to repeat the current track
(REPEAT 1 appears in the display).
Press REPEAT a second time to repeat the program
(REPEAT ALL appears in the display).
Press REPEAT a third time to turn off the feature.
7
Program mode indicator
Programming Play Order
1. Press the PROGRAM button to enter Program mode.
PROGRAM
REPEAT 1 ALL
SHUFFLE PLAY
CD
•
- - Pr:01 appears in the display indicating that this is
the first programmed track.
TRACK
2. Press TRACK/SEARCH
or
to choose a track.
(PROGRAM begins flashing in the display.)
Track number
Program number
3. Press PROGRAM to save the track in the program
memory. (PROGRAM stops flashing in the display.)
4. Repeat steps 2-4 above to program up to 20 tracks.
•
Pr FuLL appears in the display for three seconds
when the program is full; then the first program
is displayed.
What’s Program Mode?
Pressing the PROGRAM button
puts you into Program mode
(PROGRAM appears at the top of
the display). In this mode, you can
program tracks, edit the program,
or you can play tracks you’ve
already programmed.
5. Press PLAY/PAUSE
6. To stop playing the current programmed track, press
STOP once.
to begin programmed play.
7. To delete a program, press and hold the PROGRAM
button until Pr CLr appears in the display. This deletes
the program, but does not exit you from program mode.
8. To exit program mode, press STOP
twice.
Editing the Program
To edit a program, the unit must be stopped and in
Program mode.
PROGRAM
REPEAT 1 ALL
SHUFFLE PLAY
CD
TRACK
1. Press PROGRAM to move to the next program number
until you get to the programmed track you want to
change (Track 7, Program 01 in the example to the right).
Track 7 is the first programmed track
2. Press TRACK/SEARCH
or
to choose a track
PROGRAM
REPEAT 1 ALL
SHUFFLE PLAY
(Track 10 in the example to the right)
CD
3. Press PROGRAM to change the current programmed
track to the one you just selected. (Track 7 is changed to
track 10 in the example to the right.)
TRACK
Track 10 replaces Track 7 as the first programmed
track.
Clearing the Program
To clear the program from memory, press and hold the
PROGRAM button. Pr CLr appears in the display.
PROGRAM
REPEAT 1 ALL
SHUFFLE PLAY PAUSE
CD
TRACK
Note: The program will also be cleared from memory if
you turn off the unit or press OPEN
drawer.
to open the CD
You can clear a program from memory by
pressing and holding the PROGRAM button
until Pr CLr appears in the display.
8
Using the Cassette tape player
RECORD
PLAY
REWIND
F
FORWARD
STOP/EJECT
PAUSE
Understanding the Buttons
If you know what each button does, it’s easy to figure out how to operate the tape deck.
RECORD — Press to record from the radio or the CD player.
PLAY — Press to play a cassette.
REWIND — From stop mode, press to rewind the tape toward the beginning.
F. FORWARD — From stop mode, press to advance the tape toward the end.
STOP/EJECT — Press to stop current tape activity, or to open the cassette compartment door when no
buttons are active.
PAUSE — Press to interrupt tape play or record mode. Press a second time to resume tape play or tape
record mode.
Playing Cassette Tapes
1. Press TAPE on the Function Control.
2. Press STOP/EJECT to open the cassette compartment door.
3. Insert a cassette tape into the door with the top of the tape going in first.
4. Close the door securely.
5. Press REWIND or F. FORWARD to move tape to the desired starting point.
6. Press PLAY to begin playing the tape.
9
Recording on Cassette Tapes
Pause for a Moment
Using the PAUSE button on the
cassette deck instead of the STOP
button to momentarily interrupt
recording gives you a much cleaner
sounding recording when you play it
back later.
You can record programs from the radio or the CD player.
Just set up the system to use whichever option you choose,
and then record it. For best results, use normal bias cassette
tapes.
Recording from the Radio
1. Insert a cassette tape into the tape deck.
2. Choose the RADIO function and select a radio station.
3. Press the RECORD button to begin recording.
4. Press STOP/EJECT to end recording.
Quit Slacking
Recording from the Cd player
1. Insert a cassette tape into the tape deck.
2. Choose the DISC function.
A little bit of slack in your tapes
can cause scratches on the tape, or
worse yet, the tape could break. If
you notice some slack in the tape,
use a pencil to
tighten it up
before you
insert it.
3. Insert the CD you want to record. You can start with any
track on a disc (or you can create a program
to record).
A
4. Press PLAY/PAUSE
and pause disc play).
on the CD player twice (to begin
5. Press the RECORD button on the cassette deck to begin
recording.
6. Press PLAY/PAUSE
on the CD player.
A
Erase Protection
A
6 0
When you record new material, the cassette deck records
over whatever is on a tape. To protect a tape from accidental
erasure, break off one or both plastic tabs (one for each
tape side) on the top of the cassette tape. If you decide later
to record on the tape, seal the hole with a piece of
cellophane tape.
A
A
We’re on the Level
The built-in Automatic Level Control
automatically sets the input level for
optimum recording sound. You can
listen to, and even adjust the volume
setting without affecting the quality
of the recording.
10
Using the REMOTE CONTROL
(Model RP-7984 ONLY)
Installing Batteries
1. Slide the battery cover in the direction of the arrow and lift.
2X AAA 1.5V
MADE IN CHINA
OPEN
2. Install 2 “AAA” batteries (not included). Face batteries in
the direction indicated on the back.
3. Slide the cover firmly back into place.
2X AA 1.5V
MADE IN CHINA
The buttons
Your remote control operates many of your portable stereo’s
features. All of the buttons on the remote (except the volume
and stop buttons) are used to “toggle” through a list of
selections. For example, the POWER button toggles between on
and off. Press POWER once and the unit turns on, press it again
and the unit turns off. If you’re confused, check the display to
see what “toggle” you’re in!
POWER: Turns unit on and off.
VOL
MUTE
VOL
VOL (Volume up and down buttons): Control sound level.
MUTE: Suspends the output of sound (press MUTE again to
restore sound).
FUNCTION: Selects RADIO, DISC, or TAPE.
POWER
DIG EQ: (Digital Equalizer): Selects preset equalizer settings
(JAZZ, ROCK, VOCAL, or FLAT).
CUST EQ (Customized Equalizer): Press to create and use a
personalized equalizer setting. See “Custom EQ Setting” on the
next page to learn how to use this feature.
FUNCTION
DIG EQ
CUST EQ
BAND (RADIO function): Selects AM and FM.
PRESET
BAND
PRESET (RADIO function): Selects preset radio stations (five
SEEK• SCAN
stations for AM and five stations for FM).
TRACK• TUNE
SEEK•SCAN (RADIO function): Press and release to activate the
Seek feature. Press and momentarily hold to activate the Scan
feature which searches for stations continually. When using
Scan feature, press the button again to choose that station.
SHUFFLE
REPEAT
STOP
PLAY• PAUSE
TRACK•TUNE forward and reverse buttons (RADIO and DISC
function): Serve as Track/Search (forward and reverse) controls in CD
mode. Serve as Tuning up and down controls in RADIO mode.
SHUFFLE (DISC function): Activates Shuffle mode.
REPEAT (DISC function): Selects Repeat 1 when you press once or
Repeat All when you press it twice (press a third time to turn off
Repeat feature).
PLAY•PAUSE: Plays CD and pauses play of the CD.
STOP (DISC function): Stops play.
11
CUSTOM EQ Setting (RP-7984 ONLY)
The Custom EQ feature enables the listener to keep a personalized electronic equalizer setting in memory.
To create your Custom EQ setting you must use the remote control.
1. Press CUST EQ button on the remote. USEr appears in
CD
the display. All preset EQ icons turn off.
2. Press CUST EQ again. The first band 200 (bass) appears in
the display.
3. Press the VOL (volume) up and down buttons to adjust
the level.
4. Press CUST EQ when you’re satisfied with the setting for
first band and the second band 2.0 KHz (mid) appears in
the display.
CD
5. Press the VOL (volume) up and down buttons to adjust
the level.
6. Press CUST EQ when you’re satisfied with the setting for
second band and the third band 10.0 KHz (treble)
appears in the display.
kHz
CD
7. Press the VOL (volume) up and down buttons to adjust
the level.
8. When you’re finished creating your customized setting,
your portable stereo will automatically save the setting
and the display will return to its previous state after
several seconds.
kHz
CD
To select your Custom EQ setting, you must use the remote
control.
1. Press CUST EQ on the remote. USEr appears in the display.
NOTE: Once you are in Custom Equalizer mode, pressing CUST EQ scrolls through the three equalizer bands (USEr
does not appear in display). You can adjust any one of them with the volume buttons. To use one of the preset
equalizer selections, press DIG EQ on the remote or the Digital EQ button on the unit.
HEADPHONE SAFETY
For your comfort, health and safety, be sure to observe the following guidelines when using headphones:
Hearing Comfort & Well Being
•
•
•
•
Always turn volume down to the minimum setting before plugging in the headphones.
Don’t listen at a high volume.
Hearing experts advise against extended continuous listening through a headset.
If you experience a ringing in your ears, reduce volume or discontinue use.
Safety
•
Don’t use headphones while operating a motorized vehicle. This can create a traffic hazard and is illegal in
many areas.
•
•
Do not use headphones in potentially hazardous situations.
Even if your headset is an open-air type designed to let you hear outside sounds, don’t turn up the volume
so high that you can’t hear what’s around you.
12
Care and Maintenance
CLEANING THE EXTERIOR
•
Disconnect the system from AC power before cleaning the exterior of the unit with a soft dust cloth.
HANDLING COMPACT DISCS
•
•
•
Do not touch the signal surfaces. Hold by the edges, or by one edge and the hole.
Do not affix labels or adhesive tape to the label surfaces. Also, do not scratch or damage the label.
Discs rotate at high speeds inside the player. Do not use damaged (cracked or warped) discs.
CLEANING COMPACT DISCS
•
Dirty discs can cause poor sound quality. Always keep discs clean by wiping them gently with a soft
cloth from the inner edge toward the outer perimeter.
•
•
If a disc becomes dirty, wet a soft cloth in water, wring it out well, wipe the dirt away gently, and then
remove any water drops with a dry cloth.
Do not use record cleaning sprays or anti-static agents on discs. Also, never clean discs with benzene,
thinner, or other volatile solvents which may cause damage to the disc surface.
TAPE CARE
•
Don’t expose tapes to sunlight or store in hot places. High temperatures may warp the shell or
damage the tape itself.
•
•
Keep cassettes in their boxes when not in use.
Cassette tapes can be erased by magnetic fields produced by magnets, electric motors, electrical
transformers, and other devices. Keep tapes away from magnets and magnetic fields.
CLEANING THE TAPE HEADS
Iron oxide particles from the magnetic tape can build up on the parts that come in contact with the
tape. These deposits can cause incomplete erasure, muffled playback sound, and might prevent
automatic stop.
Always unplug the power cord before cleaning, and allow 30 minutes drying time when using a liquid
cleaner. Clean the heads after every 25 hours of use.
To clean the cassette tape player, open the compartment door,
push the PLAY button and gently clean the heads, capstan, and
pinch wheel with a head cleaner.
•
Demagnetize the head occasionally with a head
demagnetizing
Clean these parts
cassette (available from many audio equipment stores).
•
Never use any metal objects on or near the tape heads. Do not
allow any cleaning material to fall into the tape assembly.
13
Troubleshooting Tips
Problem
Solution
System doesn’t turn on
• Make sure power cord is securely plugged into the AC power outlet (or
that the batteries are fresh).
• When operating on batteries, make sure the AC power cord is unplugged
from the AC power jack on the back of the main unit.
• Unplug the unit for a moment, and then plug it back in.
• Check the outlet by plugging in another device.
No sound
• Adjust volume setting.
• Press MUTE on the remote (Model RP-7984 only).
• Check for proper connection of speaker wires.
• Make sure you’ve selected the correct function: CD, TAPE, or RADIO
Poor radio reception
CD doesn’t play
• Adjust the FM whip antenna for better FM reception .
• Rotate the unit to achieve better AM reception.
• Try turning off electrical appliances near the unit, such as hair dryers,
vacuum cleaners, or fluorescent lights.
• Make sure the tray contains a disc.
• Try another disc.
• Make sure that disc’s label is facing up.
• Make sure that Pause mode is not activated.
• Make sure DISC function is selected.
CD sound skips
• Clean the disc (as explained in “Care and Maintenance”).
• Check disc for warping, scratches, or other damage.
• Check for vibration or shock that may affect the unit; move system if
necessary.
Distorted or noisy recordings
Remote control won't work
• Inspect the recording head and clean it if necessary.
• Demagnetize recording head (as explained in “Care and Maintenance”).
• Be sure the unit is plugged into a working AC outlet.
• Press POWER button to assure that the system is on.
• Press the FUNCTION button on the remote until desired function is
selected: CD, TAPE, or RADIO.
• Replace batteries if they are weak. Assure that batteries are installed in
the directions indicated on the back of the remote.
• Point the remote control directly at the remote sensor while pressing
buttons.
• Move closer to system while using the remote control.
• Move any obstacles between the remote and the system.
14
Index
M-P
A
MEMORY button 5
POWER button 3
Numeric Indicator 4
AC Power 2
Antenna 3
B
PLAY/PAUSE
button 6
BAND button 5
Battery Power 2
POWER button 3
PRESET buttons 5
PRESET indicator 5
PROGRAM button 8
Program edit 8
C
Cassette deck 9
Cassette Deck Buttons
FAST FORWARD 9
PAUSE 9
Programming play order 8
PLAY 9
RECORD 9
R
Radio Band Indicator 4
Radio station presets 5
Recording on Cassette Tapes 10
Remote control 11
REPEAT button 7
REWIND 9
STOP/EJECT 9
CD Buttons
PLAY/PAUSE
SHUFFLE 7
6
STOP
TRACK/SEARCH
6
Repeating Play Order 7
and
6
S
Cleaning the Tape Heads 13
Compact discs 3" and 5" 6
Custom EQ Setting 12
Seek/Scan feature 5, 11
SEEK/SCAN button 5, 11
SEEK/SCAN Indicator 4
SHUFFLE button 7
Shuffling Play Order 7
Speakers
connecting 2
detaching 2
D
Digital EQ button 3
Digital EQ Indicator 4
Display 4, 6
E
STOP button 6
Storing Radio Stations in Memory 5
Editing a program 8
Erase Protection 10
T
F
TRACK/SEARCH button 6
Troubleshooting Guide 14
TUNING buttons 5
Tuning In Radio Stations 5
changing radio bands 5
tuning in stations 5
FM Stereo Indicator 4
FM/MONO button 5
Function Control 3
Function Indicator 4
H
Headphones 3
V
VOLUME control 3
L
Loading and playing CDs 7
15
LIMITED WARRANTY
What your warranty covers:
• Any defect in materials or workmanship.
For how long after your purchase:
• One year.
(The warranty for rental units begins with the first rental.)
What we will do:
•
Provide you with a new, or at our option, a refurbished unit.
•
The exchange unit is under warranty for the remainder of the original product’s warranty period.
How to make a warranty claim:
• Properly pack your unit. Include any cables, etc., which were originally provided with the product. We recommend
using the original carton and packing materials.
• Include in the package evidence of purchase date such as the bill of sale. Also print your name and address and a
description of the defect. Send standard UPS or its equivalent to:
Thomson Consumer Electronics, Inc.
Product Exchange Center
32 Spur Drive
El Paso, Texas 79906
• Pay any charges billed to you by the Exchange Center for service not covered by the warranty.
• A new or refurbished unit will be shipped to you prepaid freight.
What your warranty does not cover:
• Customer instruction. (Your Owner’s Manual provides information regarding operating instructions and user
controls. For additional information, ask your dealer.)
• Installation and set-up service adjustments.
• Batteries.
• Damage from misuse or neglect.
• Products which have been modified or incorporated into other products.
• Products purchased or serviced outside the USA.
• Acts of God, such as but not limited to lightning damage.
Product Registration:
• Please complete and mail the Product Registration Card packed with your unit. It will make it easier to contact you
should it ever be necessary. The return of the card is not required for warranty coverage.
How state law relates to this warranty:
• This warranty gives you specific legal rights, and you may have other rights which vary from state to state.
If you purchased your product outside the USA:
• This warranty does not apply. Contact your dealer for warranty information.
P.O. Box 1976, Indianapolis, IN 46206
Model RP-7983B/RP-7984A
© 1996 Thomson Consumer Electronics, Inc.
343A6965-0001 (E/S Rev. 0)
Trademark(s) ® Registered
96-06
Marca(s) ® Registrada(s)
Printed in Malaysia
|