RCA Clock Radio RP5415 User Guide

v5.0 (EN/E)  
equipment off and on, the user is  
encouraged to try to correct the  
interference by one or more of  
the following measures:  
PLEASE READ AND SAVE THIS FOR FUTURE REFERENCE  
This Class B digital apparatus  
complies with Canadian ICES-003.  
Cet appareil numérique de la  
classe B est conforme à la norme  
NMB-003 du Canada.  
FCC information  
This equipment has been tested  
and found to comply with the  
limits for a Class B digital device,  
pursuant to Part 15 of FCC Rules.  
These limits are designed to  
provide reasonable protection  
against harmful interference in  
a residential installation. This  
equipment generates, uses, and  
can radiate radio frequency  
energy and, if not installed  
and used in accordance with  
the instructions, may cause  
harmful interference to radio  
communications.  
IMPORTANT SAFETY INSTRUCTIONS  
user manual  
manual de usuario  
Some of the following  
the provided plug does not  
fit into your outlet, consult an  
electrician for replacement of  
the obsolete outlet.  
Protect the power cord  
from being walked on or  
pinched particularly at plugs,  
convenience receptacles, and  
the point where they exit from  
the apparatus.  
plug is damaged, liquid has  
been spilled or objects have  
fallen into the apparatus, the  
apparatus has been exposed  
to rain or moisture, does not  
operate normally, or has been  
dropped.  
information may not apply to  
your particular product; however,  
as with any electronic product,  
precautions should be observed  
during handling and use.  
Reorient or relocate the  
receiving antenna.  
Increase the separation  
between the equipment and  
receiver.  
Manufacturer/Responsible  
Party  
Audiovox Electronics Corp.,  
150 Marcus Blvd., Hauppauge, NY  
11788  
RP5415  
RP5415PK  
Read these instructions.  
Keep these instructions.  
Heed all warnings.  
Connect the equipment into  
an outlet on a circuit different  
from that to which the  
receiver is connected.  
Consult the dealer or  
an experienced radio/TV  
technician for help.  
ADDITIONAL SAFETY  
INFORMATION  
Follow all instructions.  
Do not use this apparatus near  
water.  
Only use attachments/  
accessories specified by the  
manufacturer.  
Main plug is used as  
disconnect device and it  
Clean only with dry cloth.  
Do not block any ventilation  
openings. Install in accordance  
with the manufacturer’s  
instructions.  
Do not install near any heat  
sources such as radiators, heat  
registers, stoves, or other  
apparatus (including amplifiers)  
that produce heat.  
Do not defeat the safety  
purpose of the polarized  
or grounding-type plug. A  
polarized plug has two blades  
with one wider than the  
other. A grounding type plug  
has two blades and a third  
grounding prong. The wide  
blade or the third prong is  
provided for your safety. If  
should remain readily operable  
during intended use. In order  
to disconnect the apparatus  
from the mains completely,  
the mains plug should be  
disconnected form the mains  
socket outlet completely.  
Apparatus shall not be exposed  
to dripping or splashing and  
no objects filled with liquids,  
such as vases, shall be placed  
on the apparatus.  
Use only with the  
cart, stand, tripod,  
However, there is no guarantee  
that interference will not occur  
in a particular installation. If  
this equipment does cause  
harmful interference to radio or  
television reception, which can  
be determined by turning the  
]
Modifications not expressly  
approved by the party responsible  
for compliance could void the  
user’s authority to operate the  
equipment.  
bracket, or table  
specified by the  
manufacturer,  
or sold with the apparatus.  
When a cart is used, use  
caution when moving the cart/  
apparatus combination to  
avoid injury from tip-over.  
Unplug this apparatus during  
lightning storms or when  
unused for long periods of  
time.  
Refer all servicing to qualified  
service personnel. Servicing is  
required when the apparatus  
has been damaged in any way,  
such as power-supply cord or  
WARNING:  
TO PREVENT FIRE  
OR ELECTRICAL  
SHOCK HAZARD,  
DO NOT EXPOSE  
THIS PRODUCT TO  
RAIN OR MOISTURE.  
Always leave sufficient space  
around the product for  
ventilation. Do not place  
product in or on a bed, rug,  
in a bookcase or cabinet that  
may prevent air flow through  
vent openings.  
EN/E  
It is important to read this user manual prior to using your new product for the first time.  
Es importante leer este manual antes de usar por vez primera su equipo.  
SEE MARKING ON BOTTOM OF PRODUCT  
Do not place lighted candles,  
cigarettes, cigars, etc. on the  
product.  
Connect power cord only to  
AC power source as marked on  
the product.  
Care should be taken so that  
objects do not fall into the  
product.  
Do not attempt to disassemble  
the cabinet. This product  
does not contain customer  
serviceable components.  
The marking information  
is located at the bottom of  
apparatus.  
Important Battery Precautions  
The descriptions and  
For your records  
Any battery may present a risk  
of fire, explosion, or chemical  
burn if abused. Do not try to  
charge a battery that is not  
intended to be recharged, do  
not incinerate, and do not  
puncture.  
Non-rechargeable batteries,  
such as alkaline batteries, may  
leak if left in your product for  
a long period of time. Remove  
the batteries from the product  
if you are not going to use it  
for a month or more.  
If your product usaes more  
than one battery, do not mix  
types and make sure they are  
inserted correctly. Mixing types  
or inserting incorrectly may  
cause them to leak.  
characteristics in this owner’s  
manual are for the purpose of  
general reference only and not as  
a guarantee. In order to provide  
you with the highest quality  
product, we may make changes  
or modifications without prior  
notice.  
Before you begin  
In the event that service should  
be required, you may need the  
model number and the serial  
number. In the space below,  
record the date and place of  
purchase and the serial number:  
Model No.:  
Battery back-up operation  
The power failure protection  
circuit will not operate unless  
battery is installed.  
Plugging in for power  
AC OUTLET POWER SUPPLY:  
120V~60Hz  
Power failure indicator  
When AC power is interrupted  
(disconnected) for a short period  
of time, both time and alarm  
settings will change (unless  
battery is installed). After AC  
power is restored (reconnected),  
the Digital Display will blink  
to indicate that power was  
interrupted and you should  
readjust the time and alarm  
settings.  
Alkaline (NEDA 1604A/  
IEC 6LR61) battery is  
recommended. Carbon-  
zinc battery may be used but  
memory holding time will  
be substantially reduced.  
Memory holding time for  
a fresh alkaline battery is  
approximately 8 hours (if radio  
or alarm are not operated)  
which should take care of  
short, nuisance-type AC power  
failures. To preserve battery  
life, the unit should remain  
plugged into an AC outlet.  
As the battery gets older, its  
voltage drops and memory may  
be lost. Be sure to replace the  
battery periodically. Battery  
should be removed if the unit  
will be stored for more than  
one month. Leaky battery can  
badly damage the clock radio.  
The AC power plug is  
polarized (one blade is  
wider than the other)  
and only fits into AC  
Date of Purchase:  
Place of Purchase:  
Serial No.:  
When the battery backup  
functions, the digital display will  
not light, however, the wake  
function still occurs during the  
power interruption if remaining  
battery power is adequate.  
power outlets one way.  
Technical information  
Product: Clock Radio  
Brand: RCA  
Model: RP5415/RP5415PK  
Power Supply: 120V ~ 60Hz  
Power Consumption: 4 Watts  
If the plug will not go into the  
outlet completely, turn the plug  
over and try to insert it the other  
way. If it still does not fit, contact  
a qualified electrician to change  
the outlet, or use a different one.  
Do not attempt to bypass this  
safety feature.  
Normal operation will resume  
after AC power is restored so you  
will not have to reset the time or  
wake.  
Caution marking is located at  
bottom of apparatus.  
This is CLASS II apparatus  
with double insulation,  
and no protective earth  
provided.  
Install battery as follow:  
1. Remove battery compartment  
door (located at the bottom of  
the radio) by applying thumb  
pressure to the tab on battery  
door and then lift the door  
out and off the cabinet.  
2. Connect a 9-volt battery (not  
supplied) to the connector  
plug.  
Discard any leaky or deformed  
battery immediately. They  
may cause skin burns or other  
personal injury.  
Please help to protect the  
environment by recycling  
or disposing of batteries  
according to federal, state, and  
local regulations.  
Power is fed to the unit even  
when it is not functioning. To cut  
the power supply off, the power  
cable must be unplugged.  
Do not expose batteries to  
excessive heat (for example,  
by leaving them in sunlight or  
close to fire).  
3. Replace the compartment door.  
Radio  
General controls  
Clock  
Front view  
Right view  
Setting clock  
Left view  
Selecting between  
analogue and digital clock  
Press DISPLAY to select between  
analogue and digital clock display.  
Back view  
Changing position of the power  
cord may improve reception.  
Switching on/off  
Turn the clock setting knob  
the back of the unit to adjust  
on  
Press to turn on or off the radio.  
clock time. The time decrements  
or increments will follow by a  
faster rate when you turn and  
hold the knob. The digital clock  
shows and a clock icon flashes  
on the display while you are  
adjusting the time.  
Built-In AFC – The Built In  
Automatic Frequency Control  
(AFC) works only on FM. It helps  
reducing drift on FM reception  
and keeping the radio locked in  
on the FM station to which it is  
tuned.  
Switching band  
Slide the BAND AM/FM switch on  
the back of the unit to select FM  
or AM band.  
BAND AM/FM – selects radio  
band  
Tuning radio  
Turn the TUNING knob on the  
left of the unit to adjust radio  
frequency.  
– turns on or off the radio; turns  
off the wake function  
AUX ON/OFF – selects auxiliary  
input mode  
When tuning in FM stations, you  
may notice that the station you  
are tuning can be well-tuned on  
two or three nearby points on the  
dial. Always tune carefully at the  
loudest and clearest point.  
TUNING – selects radio frequency  
+ VOLUME – – adjusts volume  
Top view  
– adjusts Wake 2 time  
– adjusts clock time  
– adjusts Wake 1 time  
Antennas  
Display brightness  
– Slide to activate  
Wake 1 settings and change Wake  
1 mode:  
– Slide to activate  
Wake 2 settings and change Wake  
2 mode:  
AM Antenna – A built-in ferrite  
rod antenna eliminates the need  
for an outside antenna for AM  
reception. Rotating the unit  
slightly may improve reception of  
distant AM stations.  
Clock time and radio frequency  
are displayed on the display area  
at the front of the unit. You  
can adjust the brightness of the  
display by rotating BRIGHTNESS  
on the back of the unit.  
(wake to alarm) – selects  
alarm as the waking mode  
(wake to radio) – selects  
radio as the waking mode  
(wake to alarm) – selects  
alarm as the waking mode  
(wake to radio) – selects  
radio as the waking mode  
– BRIGHTNESS + – adjusts display  
brightness  
SLEEP – activates sleep function  
OFF – deactivates Wake 1  
waking mode  
OFF – deactivates Wake 2  
waking mode  
FM Antenna – The power cord  
acts as your FM antenna. The  
power cord picks up moderate  
to strong stations and eliminates  
the need for an external antenna  
in most strong signal areas. Be  
sure the power cord is stretched  
out to its full length. Do not  
coil or bunch the cord together.  
SNOOZE – turns off the wake  
function temporarily; cancels the  
sleep function  
WAKE 1 CHECK TIME – checks  
the waking time for Wake 1  
WAKE 2 CHECK TIME – checks  
the waking time for Wake 2  
DISPLAY – switches between  
analog and digital clock displays  
AUX IN – jack for external audio  
input  
Sleep function  
Auxiliary input  
Wake function  
Checking wake time  
SmartSnoozeTM operation  
This operation allows extra sleep  
time after the wake function  
is on. The alarm will be off by  
pressing SNOOZE, SLEEP or  
DISPLAY until the snooze period  
is over. Snooze period can be  
set between 1 and 30 minutes  
(default: 9 min).  
In sleep mode, you can set the  
duration (up to 2 hours) before  
the radio turn off automatically.  
Setting wake time  
This unit allows two wake times  
to be set.  
Connecting auxiliary  
device  
Connect your auxiliary audio  
player (e.g. mp3 player) with an  
audio cable (not included) to the  
AUX IN jack on the left side of  
the unit.  
Switching off wake  
function  
Adjust the auxiliary  
device to mid-range  
volume and adjust the  
If you set Sleep function  
with low volume level  
before going to bed, we  
advise using Wake to alarm  
mode.  
Press WAKE 1 CHECK TIME  
or WAKE 2 CHECK TIME on  
the sides of the unit to check  
respective wake time. Wake  
time shows briefly on the  
display.  
Slide the switches on the sides  
of the unit to OFF to switch off  
respective wake function. The set  
wake time will not be erased and  
can be used the next day when  
you switch on wake function  
again.  
Turn the wake time setting  
knob or on the back  
master volume by rotating  
VOLUME knob on the unit.  
Do not turn the volume of the  
auxiliary device too high as this  
may affect the sound quality.  
For other playback operations,  
control them on your auxiliary  
device.  
1. Press and hold SLEEP and turn  
the clock setting knob  
on  
of the unit to adjust wake  
time 1 and 2 respectively.  
The time decrements or  
increments will follow by a  
faster rate when you turn and  
hold the knob.  
“WAKE 1” or “WAKE 2” icon  
flashes on the display while  
you are adjusting respective  
wake time.  
the back of the unit to adjust  
the duration up to 2 hours.  
The time decrements or  
increments will follow by a  
faster rate when you turn and  
hold the knob.  
“OFF” shows on the display  
if no wake source is selected  
while you are checking the  
wake time.  
Selecting AUX IN mode  
Press AUX ON/OFF on the  
back of the unit to select AUX  
IN mode.  
Set the “quiet” period as follow:  
1. Press and hold SNOOZE.  
2. Turn the clock setting knob  
on the back of the unit to  
adjust the snooze “quiet”  
period (default: 9 min). The  
time decrements or increments  
will follow by a faster rate  
when you turn and hold the  
knob.  
Note: The radio will be  
switched on.  
Turning off the wake  
alarm or radio  
Press AUX ON/OFF again to  
exit from the AUX IN mode  
and resume to standby mode.  
To listen to the radio again,  
2. To check the remaining  
Press SNOOZE on the top of  
the unit. The wake alarm or  
radio will be switched off  
temporarily. The alarm or  
radio will be on again when  
the snooze period is over. (see  
“SmartSnoozeTM Operation”)  
To turn off the wake alarm  
duration before the radio turns  
off, press and hold SLEEP.  
3. To cancel the sleep function,  
Selecting wake source  
You may be woken up by radio  
or alarm.  
1. Select an AM or FM station  
(see directions on “Radio”).  
2. Set a wake time (see above  
direction).  
press  
.
press SNOOZE or  
.
or radio completely, press  
.
3. Slide the switches on the sides  
The wake alarm or radio will  
activate again the next day  
unless you switch off the wake  
function (see “Switching off  
wake function”).  
of the unit to  
by alarm) or  
/
(wake  
(wake  
/
by radio). Corresponding icon  
lights on the front of the unit.  
– Wake 1 by alarm  
– Wake 1 by radio  
– Wake 2 by alarm  
– Wake 2 by radio  
Warranty information  
12 Month Limited Warranty  
Applies to RCA Audio/Video  
Products  
interruptions of broadcast  
or internet service, to costs  
incurred for installation,  
THE PURCHASE PRICE PAID  
BY PURCHASER FOR THE  
PRODUCT.  
This Warranty is in lieu of  
all other express warranties  
or liabilities. ANY IMPLIED  
WARRANTIES, INCLUDING  
ANY IMPLIED WARRANTY  
OF MERCHANTABILITY,  
SHALL BE LIMITED TO THE  
DURATION OF THIS WRITTEN  
WARRANTY. ANY ACTION FOR  
BREACH OF ANY WARRANTY  
HEREUNDER INCLUDING ANY  
IMPLIED WARRANTY OF  
MERCHANTABILITY MUST BE  
BROUGHT WITHIN A PERIOD  
OF 24 MONTHS FROM DATE  
OF ORIGINAL PURCHASE.  
IN NO CASE SHALL THE  
COMPANY BE LIABLE FOR  
ANY CONSEQUENTIAL OR  
INCIDENTAL DAMAGES FOR  
BREACH OF THIS OR ANY  
OTHER WARRANTY. No person  
or representative is authorized  
to assume for the Company  
any liability other than  
expressed herein in connection  
with the sale of this product.  
Some states do not allow  
limitations on how long an  
implied warranty lasts or the  
exclusion or limitation of  
incidental or consequential  
damage so the above  
limitations or exclusions  
may not apply to you. This  
Warranty gives you specific  
legal rights and you may also  
have other rights which vary  
from state to state.  
LOST CONTENT OR DATA, OR  
FOR THE SECURITY OF ANY  
PERSONAL CONTENT OR DATA  
ON THE RETURNED DEVICE.  
Product will be returned  
with factory default settings,  
and without any pre-loaded  
content which may have been  
installed in the originally  
purchased products. Consumer  
will be responsible for  
reloading data and content.  
Consumer will be responsible  
to restore any personal  
preference settings.  
Properly pack your unit.  
Include any remotes, memory  
cards, cables, etc. which were  
originally provided with the  
product. However DO NOT  
return any removable batteries,  
even if batteries were included  
with the original purchase. We  
recommend using the original  
carton and packing materials.  
Include evidence of purchase  
date such as the bill of sale.  
Also print your name and  
Audiovox Electronics Corp.  
Attn: Service Department.  
150 Marcus Blvd.  
Hauppauge N.Y. 11788  
1-877-833-3491  
AUDIOVOX ELECTRONICS  
CORP. (the Company) warrants  
to the original retail purchaser  
of this product that should  
this product or any part  
removal or reinstallation of  
product, to corruptions caused  
by computer viruses, spyware  
or other malware, to loss of  
media, files, data or content,  
or to damage to tapes, discs,  
removable memory devices or  
cards, speakers, accessories,  
computers, computer  
peripherals, other media  
players, home networks or  
vehicle electrical systems.  
This Warranty does not  
apply to any product or  
part thereof which, in the  
opinion of the Company, has  
suffered or been damaged  
through alteration, improper  
installation, mishandling,  
misuse, neglect, accident, or by  
removal or defacement of the  
factory serial number/bar code  
label(s). THE EXTENT OF THE  
COMPANY’S LIABILITY UNDER  
THIS WARRANTY IS LIMITED TO  
THE REPAIR OR REPLACEMENT  
PROVIDED ABOVE AND,  
Insure your shipment for loss or  
damage. Audiovox accepts no  
liability in case of damage or  
loss en route to Audiovox.  
Pay any charges billed to you by  
the Exchange Center for service  
not covered by the warranty.  
A new or refurbished unit  
will be shipped to you freight  
prepaid.  
thereof, under normal use and  
conditions, be proven defective  
in material or workmanship  
within 12 months from the  
date of original purchase, such  
defect(s) will be repaired or  
replaced with reconditioned  
product (at the Company’s  
option) without charge for  
parts and repair labor.  
How to make a warranty  
claim:  
If your product is capable  
of storing content (such  
as an mp3 player, digital  
voice recorder, etc), it is  
recommended to make  
What we will do:  
To obtain repair or  
periodic backup copies of  
content stored on the product.  
If applicable, before shipping a  
product, make a back up copy  
of content or data stored on  
the device. Also, it is advisable  
to remove any personal  
content which you would not  
want exposed to others. IT IS  
LIKELY THAT CONTENTS AND  
DATA ON THE DEVICE WILL BE  
LOST DURING SERVICE AND  
REFORMATTING. AUDIOVOX  
ACCEPTS NO LIABILITY FOR  
Provide you with a new, or at our  
option, a refurbished unit. The  
exchange unit is under warranty  
for the remainder of the original  
product’s warranty period.  
replacement within the terms  
of this Warranty, the product  
is to be delivered with proof  
of warranty coverage (e.g.  
dated bill of sale), specification  
of defect(s), transportation  
prepaid, to the Company at  
the address shown below.  
This Warranty does not  
Audiovox Electronics Corp.  
150 Marcus Blvd,  
For Canada Customers, please  
ship to:  
Audiovox Return Centre  
c/o Genco  
6685 Kennedy Road,  
Unit#3, Door 16,  
Mississuaga, Ontario  
L5T 3A5  
Hauppauge, NY 11788  
©2009 Audiovox Electronics Corp.  
Trademark(s) ® Registered  
Marque(s) ® Deposée(s)  
Marca(s) ® Registrada(s)  
Printed in China  
extend to the elimination  
of externally generated  
static or noise, to correction  
of antenna problems, loss/  
address and a description of  
the defect. Send via standard  
UPS or its equivalent to:  
IN NO EVENT, SHALL THE  
COMPANY’S LIABILITY EXCEED  
 

QSC Audio Stereo System 914LZ User Guide
Quantum Portable Media Storage 6 00360 15 User Guide
RCA DVD Player DRC310N User Guide
Renesas Computer Hardware RSKM16C62P User Guide
Riccar Air Conditioner RSBH C User Guide
RocketFish Computer Hardware RF PHD35 User Guide
Ryobi Brush Cutter PBC3046B User Guide
Samsung Network Card SCH T300 User Guide
Saturn Automobile 2007 Vue Hybrid User Guide
SECO LARM USA Security Camera EV 2166 N3WQ User Guide