OWNER'S MANUAL
Please Read the Manual First before Operation
PT590AU
5.1 Channel 350 Watts Built-In AM/FM Radio/
USB/SD Card HDMI Amplifier Receiver
Important Safety Information
For Customers
Thank you for purchasing the HDMI receiver. We strongly recommend that you carefully study the operating
instructions before attempting to operate the unit and that you note the listed safety information.
Caution
You are cautioned that changes or modifications not expressly approved in this manual could void your authority to
operate this equipment.
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
To prevent fire, do not cover the ventilation of the apparatus with newspapers, table-cloths, curtains and etc. Do
not place lighted candles on the apparatus.
To prevent fire or shock hazard, do not place objects filled with liquid, such as vases, on the apparatus.
Do not install the appliance in a confined space, such as a bookcase or built-in cabinet.
Install this system so that the power cord can be unplugged from the wall socket immediately in the event of
trouble.
Batteries or batteries installed apparatus shall not be exposed to excessive heat such as sunlight or fire.
System Features
5.1 Channel Amplifier.
4 HDMI Input Port and 1 HDMI Output Port for HDMI Receiver and HDMI Switcher.
One Key Switch Function Between HDMI Receiver and HDMI Switcher.
Built-In AM/FM Radio.
Built-In USB and SD Audio.
2 MIC Input, Treble and Bass of MIC Adjustable, Independent MIC Volume Control.
Over Current Protection, Short Circuit Protection And Over Voltage Protection.
12 Preset Radio Station.
Full Remote Control.
VFD Display.
Power Output: 300 Watts LR Channel (4 Ohm) 50W for Center, Surround L and Surround R(4 Ohm).
Inout Selector: 4 in 1 out HDMI Selector, 3 Stereo RCASelector, 1AM/FM Radio, 1 USB/SD, 2 Microphone Input.
Output: 5 Channel Speaker Output Terminal for L, R, Center, SL, SR, And 1 line Out for Subwoofer.
Total Power Consumption: 350W.
Front Panel Function
6
1
11
7
2
3
4
5
8
9
10
12
13
14
15
16
17
18
19
20
21
22
1.Tuner band adjustment knob.
8.HDMI3 input selector.
9.HDMI4 input selector.
10.Mute control selector.
11.Master volume adjustment knob.
12.Power on/off selector.
15.Mic bass adjustment knob.
16.Mic1 input socket.
17.Mic2 input socket.
18.Mic1 volume adjustment knob.
19.Mic2 volume adjustment knob.
20.Mic volume adjustment knob.
21.SD/MMC card input socket.
22.USB input socket.
2.AUX1/AUX2/AUX3 input selector.
3.FM/AM input selector.
4.USB/SD input selector.
5.HDMI1 input selector.
6.VFD display window.
13.Mic echo adjustment knob.
14.Mic treble adjustment knob.
7.HDMI2 input selector.
.1.
Front Panel Display Window
Name
1.STEREO
Function
AUX/TUNER/USB/SD INPUT
Light up when AUX1/2/3, FM/AM,USB/SD input.
2.AC-3 PROLOGIC
3.DSP
HDMI INPUT
DSP STATE ICON
Light up when 5.1 channel or HDMI1/2/3/4 input.
Light up when play DSP effect.
4.DIGITAL DISPLAY
5.KHz MHz
Light up to display value of current input mode.
KHz MHz ICON
Light up when tuner input is selected and indicates the
value on the display for KHz/MHz.
6.SPECTRUM DISPLAY
Light up to display the spectrum of different channel.
Real Panel Connectors
TV or video display
Power
DVD or HDMI source
Stereo input
PT590AU
DIGITAL HDMI RECEIVER
3
Speaker system
Subwoofer
Side left
Front left
Front right Side right
Center
.2.
Using the Remote Control
1
2
1.Power on/off control selector
2.HDMI audio switch selector
3.Tuner band control selector
4.Tuner memory selector
3
4
5.Channel source output selector
6.Treble volume increase selector
7.Left balance selector
13
14
8.Treble volume decrease selector
9.USB/SD play selector
10.USB/SD-skip selector
11.Side left volume adjustment selector
12.Center volume adjustment selector
13.Tuner number selector
15
16
5
6
17
14.Input mode selector
18
7
8
19
15.DSP control selector(live, hall, church)
16.Bass volume increase selector
17."Mute mode" control selector
18.Master volume control selector
19.Right balance selector
20
21
9
10
11
12
22
23
20.Bass volume decrease selector
21.USB/SD pause selector
22.Side right volume adjustment selector
23.Subwoofer volume adjustment selector
Battery Installation
1.On the back of the remote control, push the tab and lift off the battery cover.
2.Obtain two (2) fully-charged AAA batteries. Match the "+" and "-" marks on the batteries to the "+" and "-"
marks in the battery case, then insert the new batteries.
3.Align the cover keys with the case holes and press the cover back into place. The tab should click when the
cover is locked.
4.Test the unit by pressing POWER or any mode key. If the batteries are inserted correctly, the selected mode key
will blink once.
Note
Do not leave the remote control in an extremely hot or humid place.
Do not use a new battery with old ones.
Do not mix manganese batteries with other kinds of batteries.
Do not expose the remote sensor to direct sunlight or lighting apparatuses. Doing so may cause a malfunction.
If you do not intend to use the remote control for an extended period of time, remove the batteries to avoid
possible damage from battery leakage and corrosion.
.3.
Basic Operation
Turn on/off the Power
Press " " key to control the power on and off.
Master Volume Control
Press the "
" or "
" Key to adjust the main channel volume.
Side Left Channel Volume Control
Press "
" key, screen display the SL volume, press "-ADJUST+" key to adjust side left channel volume.
Side Right Channel Volume Control
Press "
" key, screen display the SR volume, press "-ADJUST+" key to adjust side right channel volume.
Center Channel Volume Control
Press "
" key, screen display the CEN volume, press "-ADJUST+" key to adjust center channel volume.
Subwoofer Volume Control
Press "
" key, screen display the SW volume, press "-ADJUST+" key to adjust subwoofer channel volume.
How to Adjust Treble
Press "
" key to adjust the treble output of the main channel.
How to Adjust Bass
Press "
" key to adjust the bass output of the main channel.
How to Play HDMI
Make sure HDMI1/2/3/4 connection lines are correct, Press the "
How to Play AUX
/
/
/
" key to play HDMI.
Make sure AUX1/2/3 connection lines are correct, Press the "
/
/
" key to play AUX.
How to Play USB/SD
1.Select USB/SD Input Mode
Make sure USB or SD card insert to the USB/SD socket, Press the "
" key to select USB/SD input mode.
2.USB/SD Control
"
": Control the USB/SD play.
"
"
": Control the USB/SD pause.
": Control the USB/SD skip.
How to Play Tuner
1.Select Program
Use " " key to select FM/AM band. Press the " "key to adjust the band of tuner. Press the " "key for 2
seconds, the FM will search automatically. You can press the " "key once to stop the function.
2.Listen to the Preset Program
Press the number keys "
-
" to select the radio program that you already saved. Once selected, screen will
display the radio program's frequency in the memory area.
3.Memory Program
When you receive a clear radio program, press the " " key first, and then the screen displays the "Memory"
icon. Press one of the 12 "
-
" number key on the remote control to select the memory station. If you want
to extract the channel you saved, just press the number key you selected.
How to Mute
Press " " key to turn sound off/on.Press again to restore the audio to the original level.
Introduction of DSPControl Key
Press the key " " repeatedly to switch to different operations: Live, Hall or Church.All the above functions can
give different sound effects.
Introduction of Source Output Selector Area
Press " " key to receive 5.1 channel(default mode); Press "
" key to receive 3.1 channel(SL, SR mute); Press
"
" key to receive 2.1 channel(SL, SR, CEN mute).
.4.
Trouble Shooting
Use this chart to help you solve operational problems. If there are any problems that can not be solved,
please contact Service Center.
.5.
|