Plantronics Bluetooth Headset Plantronics Explorer 210 Series User Manual |
Plantronics Explorer® 210 Series
User Guide
Contents
Welcome...............................................................................................ii
What is Bluetooth®? ............................................................................iv
Package Contents, Features and Accessories .....................................1
Charging Your Headset ........................................................................2
How to Charge Your Headset Using the AC Charger ..................2
Pairing Your Headset ...........................................................................3
Plantronics QuickPair™ Technology .............................................3
How to Pair Your Phone With Your Headset for the First Time .....4
How to Pair Your Headset if it Has Been Previously Paired With
Another Device ...........................................................................5
Adjusting the Fit ...................................................................................6
Headset Controls .................................................................................7
Range ..................................................................................................8
Indicator Lights ....................................................................................9
Hands-Free Features .........................................................................10
Troubleshooting .................................................................................11
Product Specifications .......................................................................12
iii
®
What is Bluetooth ?
Bluetooth wireless technology provides a way for devices to
communicate with each other using short-range radio frequency instead
of wires. Any two Bluetooth devices can communicate as long as they
both have Bluetooth turned on, they are within range and they have
been paired — a quick “handshake” process that connects the two
devices. Bluetooth range is up to 10 metres (33 feet). Obstructions such
as walls or other electronics devices can cause interference or shorten
the effective range.
NOTE For optimal performance, place your headset and phone on the
same side of your body.
iv
Package Contents and Features
Headset Front
Power on/off
Call control button
Indicator light
Volume control
Earloop
Headset Back
Microphone
Speaker/eartip
Charging jack
AC Charger
100–240V
Plantronics Explorer® 210 Series Accessories*
Vehicle Charging Adapter
#76777-01
USB Headset Charger
#76016-01
Vehicle Power Charger
#78583-01
* Not included. To order, please contact your Plantronics supplier or go
1
Charging Your Headset
1
2
How to Charge Your Headset Using the AC Charger
Before using your headset for the first time, charge it for at least
20 minutes. A full charge takes approximately two hours.
1 Connect the AC charger to a power outlet.
2 Plug the AC jack into the charging jack on the headset.
While your headset is charging, the indicator glows red. When your
headset is fully charged, the indicator turns off. Do not use your headset
while it is connected to the charger.
NOTE Never charge the battery where the temperature may fall below
0°C (32°F) or rise above 40°C (104°F) – for example, in an unattended
motor vehicle. Do not charge the battery while it is unattended.
CHARGING TIME
2 hours ...................
Full charge
20 minutes ..............
Minimum charge
before first use
2
Pairing Your Headset
Pairing is the process of introducing your headset to your phone.
Before using your headset for the first time, you must pair it with
your Bluetooth phone. Normally, you need to pair your headset with
your phone only once.
Plantronics QuickPair™ Technology
Your new headset includes Plantronics QuickPair technology to simplify
the Bluetooth setup process. The first time you turn your headset on,
your headset automatically enters pairing mode for 10 minutes (the
indicator light flashes red and blue). Once paired successfully, your
headset stays on for instant use.
If not successfully paired after 10 minutes, your headset automatically
goes to standby mode. When you turn the headset off then on again,
it automatically goes into pairing mode until successfully paired with a
Bluetooth phone.
3
Pairing Your Headset – First Time
1
2
3
SETTINGS
Time and Date
Phone Settings
BLUETOOTH
Bluetooth
Sound Settings
Network Services
Security
Discover/
Search
8BK;JEEJ>
Reset Settings
(NNFbWdjhed_Yi
PASSKEY
0000
4
How to Pair Your Phone With Your Headset for the First Time
1 Turn on the Bluetooth feature on your phone.
For most phones, select Settings/Tools > Connections >
Bluetooth > On. See your phone’s user guide for more information.
2 Turn the headset on.
Turn on your headset by sliding the power switch forward. Wait until
the indicator light flashes blue and red.
If you don’t see the red/blue flash,turn the headset off, wait, then
turn it on again. Wait until you see the red/blue flash.
3 Use the commands on your phone to locate your headset.
For most phones, select Settings/Tools > Connections > Bluetooth >
Search > 2XXPlantronics. See your phone’s user guide for
more information.
4 When prompted for the passkey, enter 0000.
Pairing is successful when the indicator on your headset flashes
blue. Your headset is now connected and ready to use.
4
Pairing Your Headset
3
1
BLUETOOTH
Discover/
Search
8BK;JEEJ>
(NNFbWdjhed_Yi
PASSKEY
4
2
0000
How to Pair Your Headset if it Has Been Previously Paired
With Another Device
1 Turn the headset off.
Slide the power switch off, then wait until the indicator turns red
and then turns off.
2 Turn the headset on.
Slide the power switch on. After the headset is powered on, press
and hold the call control button until the indicator light continues to
flash red and blue.
3 Use the commands on your phone to locate your headset.
For most phones, select Settings/Tools > Connections > Bluetooth
> Search > 2XXPlantronics. See your phone’s user guide for
more information.
4 When prompted for the passkey, enter 0000.
Pairing is successful when the indicator on your headset flashes
blue. Your headset is now connected and ready to use.
5
Adjusting the Fit
1
2
Right
Left
1 To remove the earloop, gently pull up on earloop near the
Plantronics name until you hear a snap.
2 Position earloop as shown above, then gently snap back
onto post.
3 Place the earloop behind your ear.
4 Rotate the headset so that the speaker/eartip rests
comfortably in your ear.
5 Align the microphone with the corner of your mouth.
Callers can hear you best when you point the microphone towards
the corner of your mouth.
4
3
5
6
Headset Controls
Turn on the headset Slide the power switch on, then wait until the
indicator glows blue. You will hear ascending tones.
Turn off the headset Slide the power switch off, then wait until the
indicator glows red. You will hear descending
tones. When power is off, indicator stays off.
Answer a call
Briefly press the call control button.
When you receive a call, your phone may ring
before your headset rings. Wait until you hear
the ring in your headset before you press the call
control button to answer the call.
Reject a call
Make a call
When phone rings, press and hold the call control
button until you hear a single low tone.
Enter number on your phone, press send, and
the call is automatically transferred to headset;
no need to press call control button.
Adjust the volume
Tap the volume + button to increase volume.
At the upper limit you will hear two tones. Tap -
button to decrease volume level. (There are eight
volume levels.)
WARNING Do not use headphones/headsets
at high volumes for an extended period of time.
Doing so can cause hearing loss. Always listen
healthandsafety for more information on headsets
and hearing.
7
Headset Controls
Transfer a call from While in a call, press and hold the call control
headset to phone
button until you hear a single low tone.
Transfer a call from While in a call, press and hold the call control
phone to headset
button until you hear a single low tone.
Range
To maintain a connection, keep your headset within 10 metres (33 feet)
of the Bluetooth device. If there are obstacles between your headset and
the device, you may experience interference. For optimal performance,
place your headset and phone on the same side of your body.
Audio quality degrades as you move out of range. When you are far
enough away to lose the connection, you hear a high tone in the headset.
NOTE The headset attempts to reconnect for 30 seconds. If you move
back in range after 30 seconds pass, you can manually reconnect by
pressing the call control button.
NOTE Audio quality is also dependent upon the device with which the
headset is paired.
8
Indicator Lights
Headset Status
Headset Indicator Light
Powering on
Steady blue, then intermittent flashes
(changes to standby mode)
Powering off
Standby
Red appears and goes off
Blue intermittent flashes
Charging battery
Red solid light. Light indicator turns off when
battery is fully charged and headset is off.
Low battery
Pairing mode
Missed call
Triple red flashes
Blue/red alternating flashes
Purple flashes. Press the call control button
to cancel flashing light.
Incoming call
Triple blue flashes when ringing.
9
Hands-Free Features
If your phone and your wireless service provider both support hands-free
operation, you can use the following features:
Redial the last number
To activate last number redial, double
press the call control button. You will
hear a double tone after each double-
button press.
Using Voice Dialling
With the headset on, press the call
control button for 2 seconds to activate
the voice dialling.
NOTE To use voice-activated dialling, the
voice-dialling feature must be enabled on
your phone. See your Bluetooth phone
manual for instructions.
Reject a call
When receiving an incoming call, press the
call control button for 2 seconds to reject
the call.
10
Troubleshooting
My headset
Headset was not in pairing mode when mobile
does not work
with my phone.
phone menu selections were made. See page 5
“Pairing Your Headset.”
Incorrect menu selections were made on
your mobile phone. See page 5 “Pairing Your
Headset.”
I did not enter
my passkey.
Your phone did not locate the headset.
Repeat the pairing process on page 5.
Incorrect menu selections were made on your
mobile phone. Repeat the pairing process on
page 5.
Callers cannot hear The headset is not turned on or the headset is
me, or I cannot
hear caller/dialling
tone.
not connected to mobile phone. Press the call
control button for 2 seconds until you hear a
beep or make sure the power switch is in the ON
position by sliding switch up and down again.
Your headset is out of range. Move the headset
closer to the phone or Bluetooth device.
Your headset battery is drained. Charge your
battery using the AC power adapter supplied.
The listening volume is too low. Tap the volume +
key to increase the sound heard in the headset.
11
Product Specifications
Talk Time*
Standby Time*
Charge Time
Range
Up to 7 hours
Approximately 8 days or 200 hours
2 hours
Up to Bluetooth standard 10 metres (33 feet)
Power Requirements 5V DC – 180 mA
Battery Type
Rechargeable, non-replaceable,
lithium ion polymer
Storage/Usage
Temperature
10 °C – 40 °C (50 °F – 104 °F)
Version
Bluetooth 2.0
Supports Bluetooth hands-free and headset profiles.
* Battery enabled. Performance may vary by device.
12
For safety information, see the separate “For Your Safety” booklet.
For warranty information, see the separate “2 Year Warranty” leaflet or visit
en
fi
nl
Plantronics Ltd
Wootton Bassett, UK
Tel: 0800 410014
Finland
Tel: 0800 117095
Plantronics B.V.
Hoofddorp, Nederland
Tel: (0)0800 Plantronics
0800 7526876 (NL)
fr
ar
Plantronics Sarl
Noisy-le-Grand
France
00800 75268766 (BE/LUX)
no
Norge
Tel: 80011336
cs
ga
pl
Czech Republic
Plantronics BV
Regus House
Harcourt Centre
Harcourt Road
Dublin 2
6Wnꢀjonh`VÈꢀl^åXZ_ꢀ
^c[dgbVX_^/ꢀꢀ
lll#eaVcigdc^Xh#Xdb
da
Danmark
Tel: 80 88 46 10
pt
Ireland
Portugal
Tel: 0800 84 45 17
de
Service ROI: 1800 551 896
Plantronics GmbH
Hürth, Deutschland
he
ro
:
באתר בקר ,נוסף למידע EZcigjꢀ^c[dgbVIJ^^ꢀꢀ
lll#eaVcigdc^Xh#Xdb
Kundenservice:
Deutschland 0800 9323 400
Österreich 0800 242 500
Schweiz 0800 932 340
hu
ru
További információk:
dÍÎÍÊÌÇÑÄÊÛÌ¿¾ꢀ
ÇÌÓÍÏË¿ÕǾꢁꢀ
XXXꢂQMBOUSPOJDTꢂDPN
el
it
Για περισσότερες
πληροφορίες:
sv
Plantronics Acoustics
Italia Srl
Milano, Italia
Sverige
Tel: 0200 21 46 81
es
Numero Verde: 800 950934
tr
Plantronics Iberia, S.L.
Madrid, España
Tel: 902 41 51 91
Daha fazla bilgi için:
13
МЛ05
Plantronics B.V.
Scorpius 140
2132 LR Hoofddorp
Netherlands
© 2009 Plantronics, Inc. All rights reserved. Plantronics, the logo design, Plantronics
Explorer, QuickPair and Sound Innovation are trademarks or registered trademarks of
Plantronics, Inc. The Bluetooth word mark and logo are owned by Bluetooth SIG, Inc. and
any use of such marks by Plantronics, Inc. is under license. All other trademarks are the
property of their respective owners.
U.S. Patents Pending
82216-03 Rev A
|