Contents
Preface.........................................................................................2
Installation ...................................................................................4
Unpacking........................................................................................................4
Connecting the LCD Monitor and Base.......................................................................5
Optional Mounting Alternatives...............................................................................5
Tilt, Swivel and Pivot Rotation ...............................................................................5
Detaching LCD Monitor from Its Stand.......................................................................5
Interface for Arm Applications ...............................................................................6
Connecting the Display ........................................................................................6
Connecting the AC Power .....................................................................................6
Connecting the Audio Cable...................................................................................6
Setting Up the LCD Monitor ...................................................................................6
Power Management System ...................................................................................6
Display Controls............................................................................7
User Controls ....................................................................................................7
Adjusting the Monitor's Display ...............................................................................8
Technical Information .................................................................12
Specifications.................................................................................................. 12
Standard Timing Table ................................................................14
Troubleshooting...........................................................................17
Product Registration and Technical Support.................................18
1
Preface
This manual is designed to assist users in setting up and using the LCD Monitor. Information in this document has
been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The
information in this document is subject to change without notice. This document contains proprietary information
protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical,
electronic or other means, in any form, without prior written permission of the manufacturer.
FCC Statement Warning
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not
installed and used in accordance with the instruction, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•
•
•
Reposition or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
•
Consult the dealer or an experienced monitor technician for help.
Warning
Use only shielded signal cables to connect I/O devices to this equipment. You are cautioned that
changes or modifications not expressly approved by the party responsible for comliance could void
your authority to operate the equipment.
This device complies with part 15 FCC Rules. Operation is subject to the following two conditions (1)
This device may not cause harmful interference. (2) This device must accept any interference
received, including interference that may cause undesired operation.
Canadian DOC Notice
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
2
Important Safety Instructions
Please read the following instructions carefully. This manual should be retained for future use.
1. To clean LCD Monitor screen;
-- Power off LCD Monitor and unplug the AC Cord.
-- Spray a non-solvent cleaning solution onto a rag.
-- Gently clean the screen with dampened rag.
2. Do not place the LCD Monitor near a window. Exposing the monitor to rain water,
moisture or sunlight can severely damage it.
3. Do not apply pressure to the LCD screen. Excess pressure may cause permanent damage to the
display.
4. Do not remove the cover or attempt to service this unit by yourself. Servicing of any nature should
be performed by an authorized technician.
5. Store LCD Monitor in a room with a room temperature of -20° ~ 60°C (or -4° ~ 140°F). Storing the
LCD Monitor outside this range could result in permanent damage.
6. If any of the following occurs, immediately unplug your monitor and call an authorized technician.
*
*
*
Monitor to PC signal cable is frayed or damaged.
Liquid spilled into LCD Monitor or the monitor has been exposed to rain.
LCD Monitor or the case is damaged.
7. Only use the supplied main lead to connect the monitor. For a nominal current up to 6A and a
device weight above 3 kg, a line not lighter than H05VV-F, 3G, 0.75 mm2 must be used.
Important Recycle Instruction:
LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE
RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL
LAWS. FOR MORE INFORMATION, CONTACT THE ELECTRONIC INDUSTRIES
ALLIANCE AT WWW.EIAE.ORG. FOR LAMP SPECIFIC DISPOSAL
INFORMATION CHECK WWW.LAMPRECYCLE.ORG.
Contains Mercury, Dispose of Properly
3
Installation
Unpacking
Before unpacking the LCD Monitor, prepare a suitable workspace for your Monitor and computer. You
need a stable and clean surface near a wall power outlet. Make sure that LCD Monitor has enough
space around it for sufficient airflow. Though the LCD Monitor uses very little power, some ventilation
is needed to ensure that the Monitor does not become too hot.
After you unpack the LCD Monitor, make sure that the following items were included in the box:
*
*
*
LCD Monitor
*
*
*
User's Manual
*
Base
Monitor-to-PC VGA Cable
Monitor-to-PC DVI-D Cable
Stereo Jack Audio Cable
Power Cord
If you find that any of these items is missing or appears damaged, contact your dealer immediately.
4
Connecting the LCD Monitor and
4
Base
hook up the cable clip
When you open the box, place the monitor and put
on the desk first. (See fig. 1-1)
nConnect the LCD monitor and base.
oUsing your hand, lock the base and neck by
screwing the thread clockwise.
p To unlock the height adjustment feature of the
stand, locate the pin on the back of the stand
column and turn the pin knob counterclockwise.
qMount the cable clip for cable management.
2
3
Remove PIN by turning
counterclockwise
Figure 1-1
Optional Mounting Alternatives
Warning: The monitor stand base may forcefully extend and cause injury. Raise the monitor to its
"Full Up" position before removing the monitor stand.
90
+20
Tilt, Swivel and Pivot Rotation
35
35
The LCD Monitor is designed to have a tilt
range of -5°to +20°, a swivel range of -35°to
+35°, and a 90° pivot rotation. (See fig. 1-2)
-5
UP
Figure 1-2
Warning
Do not force the LCD Monitor over its maximum viewing angle settings as stated above. Attempting
this will result in damaging the Monitor and Monitor stand.
Detaching LCD Monitor from Its Stand
1
Unscrew screws n the swivel base support column and
pull downo the hinge to release.
pCable management ring.
3
2
Figure 1-3
5
Interface for Arm Applications
The rear of this LCD display has four integrated 4 mm, 0.7
pitch threaded nuts, as well as four 5 mm access holes in the
plastic covering as illustrated in Figure 1-4. These
specifications meet the VESA Flat Panel Monitor Physical
Mounting Interface Standard (paragraphs 2.1 and 2.1.3,
version 1, dated 13 November 1997).
Note: Please using M 4mm x 16mm (L) screw for this
application.
Figure 1-4
Connecting the Display
1. Power off your computer.
2. Connect one end of the signal cable to the LCD Monitor’s
VGA port or DVI port. (See Fig 1-5)
3. Connect the other end of the signal cable to the VGA port
or DVI port on your PC .
4. Make sure connections are secure.
DVI
D-SUB
Figure1-5
Connecting the AC Power
5. Connect the power cord to the LCD Monitor.(See Fig. 1-6)
6.Connect the power cord to an AC power source.
Power Jack
Power Cord
Figure1-6
Connecting the Audio Cable
1. Connect the audio cable to the "LINE OUT" jack on your
PC's audio card or to the front panel's “AUDIO OUT” jack of
your CD ROM drive. (See Fig. 1-7)
Connect the other end of the audio cable to the LCD Monitor's
"LINE IN" jack.
Audio Jack
Figure1-7
Setting Up the LCD Monitor
1. Make sure the AC power cord is connected to the LCD Monitor.
2. Turn on the LCD Monitor's power switch, located on the bezel of the monitor.
Power Management System
This LCD Monitor complies with the VESA DPM Power Management guidelines. If you have VESA's DPM™
compliance display card or software installed in your PC, the monitor can automatically reduce its
power consumption when not in use. If input from keyboard, mouse or other input devices is detected
by the computer, the monitor will automatically "wake up". When the LCD Monitor is in power saving
mode, the monitor screen will be blank and the power LED indicator will light yellow.
6
Display Controls
User Controls
A brief description and the location of all LCD Monitor functions controls and indicators:
Figure 2-1
Power LED will be Green when monitor is on, be yellow when in power
saving mode, be dark when monitor in off mode.
1
Power ON/OFF switch. Push to power on or power off. (Toggle switch)
2
Shows main OSD menu/ Enter key (in OSD menu)/ Audio mute and unmute
( must activate Volume OSD first, push ▲ / ▶ then Menu/Enter)
Menu/Enter
3
Shows Volume OSD/ Moves right or up (in OSD menu)
4
Selects input source/ Moves left or down (in OSD menu)
5
Auto adjustment (in D-Sub input only)/ Exit OSD menu/ Exit (in OSD
menu)
Auto/Exit
6
7
Adjusting the Monitor's Display
Main OSD
Sub
Main Menu icon
Sub Menu item
Description
Menu item
STANDARD Default Setting. Reflects native display capability.
Displays scenes in clearest detail. Pictures and
MOVIE
GAME
TEXT
photographs appear in vibrant colors with sharp
detail.
Enhances color.
Preset Mode
Optimal balance of brightness and contrast
prevent eyestrain. The most comfortable way to
read onscreen text
PHOTO
Enhances colors and emphasize fine detail.
Adjusts the background brightness of the screen
image.
Brightness
Contrast
Adjusts the contrast between the foreground and
background of the screen image.
Adjusts the contrast of screen image
automatically.
Auto Contrast
Black Level
Sharpness
Adjusts the black level of screen image.
Adjusts the scaling effect. (smoother or sharper.)
8
FULL
Selects wide format for display.
Selects 4:3 format for display.
Expansion Mode
Auto Adjustment
ASPECT
Auto adjusts the H/V Position, Phase and Clock of
picture. (available in analog mode only)
Adjusts the horizontal position.
(available in analog mode only)
H. Position
V. Position
Clock
Adjusts the vertical position.
(available in analog mode only)
Adjusts picture Clock.
(available in analog mode only)
Adjusts picture Focus.
Phase
(available in analog mode only)
9300K
7500K
5000K
Sets the color temperature to 9300K.
Sets the color temperature to 7500K.
Sets the color temperature to 5000K.
sRGB
User
Sets the color temperature to sRGB.
Allows users to adjust red/green/blue intensity.
Multi-language selection.
R/G/B
Language
OSD
H. Position
Adjusts the horizontal position of the OSD.
Adjusts the vertical position of the OSD.
Adjusts the OSD timeout.
OSD
V. Position
OSD
Turn Off
Volume
Adjusts the volume of audio
D-SUB
Selects input signal to analog (D-Sub)
Input Select
DVI
Selects input signal to digital (DVI)
720/640x400
Resolution Select 1360/1280/1024x768 Selects the resolution of choice.
1680/1400x1050
DDC/CI
Recall
ON/OFF
Turns ON/OFF DDC/CI support
Clear each old status and return all adjusted
parameters to factory preset values.
9
Shows the resolution, H/V frequency and input port
of current input timing.
Information
Icon
Function
Description
CIE coordinated Color Temperature of
9300°K
Sets the CIE coordinate color temperature to
9300°K
9300
CIE coordinated Color Temperature of Sets the CIE coordinate color temperature to
7500
5000
User
7500°K
7500°K
CIE coordinated Color Temperature of
6500°K
Sets the CIE coordinate color temperature to
5000°K
Three colors (Red, Green, Blue) can be
adjusted from the OSD menu
Sets the settings to a by user defined CIE
Temperature.
OSD Lock Out Function
When monitor is in normal display, you can enable the “OSD Lock Out” function.
Option 1: OSD & Power button lock – all 5 buttons including the “POWER” button are locked.
Press and hold the “Auto/Exit” and ”
all 5 buttons.
” buttons at the same time for 3 seconds to lock
The monitor will show an “OSD LOCKED !” message for 5 seconds and the message will disappear
automatically.
Repeat this step to unlock.
Option 2: OSD lock – all 4 buttons are locked except the “POWER” button.
Press and hold the “
to lock the buttons.
” and “
” buttons at the same time for 3 seconds
The monitor will show an “OSD LOCKED !” message for 5 seconds and the message will disappear
automatically.
10
Repeat this step to unlock.
11
Technical Information
Specifications
LCD Panel
Size
19W"
Display Type
Resolution
Display Dot
Display Color
Active matrix color TFT LCD
1680 x 1050
1680 x (RGB) x 1050
16.7M with FRC or Dithering
Video
Input Signal
Input Impedance
Polarity
Analog RGB 0.7Vp-p
75 Ohm ± 2%
Digital TMDS
Positive, Negative
Amplitude
0 - 0.7 ± 0.05 Vp
Horizontal Frequency: 30 ~ 80 kHz
Vertical Frequency: 56 ~ 75 Hz
30~80kHz
56~75Hz
Multi-mode Supported
Control
Power switch (hard and soft types)
On/Off switch with LED indicator
Audio
Input
500mVrms
1W +1W
Output
OSD
Brightness
Contrast
Digital
Digital
Horizontal Position
Vertical Position
Phase
Digital
Digital
Digital
Clock
Digital
Display Mode Setup
Use EEPROM to save settings in memor.
12
Power Management
Mode
Power Consumption*
44 W maximum
2 W maximum
AC Input
240 VAC
240 VAC
240 VAC
240 VAC
LED Color
Green
DPM On
DPM Off
Orange
Dark
DC switch off Off
Disconnected
1 W maximum
1 W maximum
*Meeting VESA DPM requirements measured from AC Input end of AC power cord.
Sync Input
Signal
Analog
Digital
TMDS
Separate TTL compatible horizontal and
vertical synchronization.
--
Polarity
Positive and negative
Supports VESA DDC2B DDC/CI functions
AC socket
Plug & Play
External Connection
Power Input (AC input)
15-pin D-sub connector
DVI-D Cable
Video Cable
Audio Cable
Stereo Jack
AC socket
Power Input (AC input)
Environment
Temperature
5°C to 40°C/41°F to 104°F
20% to 80%
Operating Condition
Storage Condition
Relative Humidity
Temperature
-20°C to 60° C/-4°F to140°
5% to 85%
Relative Humidity
Power Supply (AC Input)
Input Voltage
Single phase, 100 ~ 240VAC, 50 / 60 Hz
1.5 A maximum
Input Current
Size and Weight
Dimensions
438.5 (W) x 348(H) x 198 (D) mm
6.34 ± 0.3 kg
Net Weight
Gross Weight
7.75 ± 0.3 kg
13
Standard Timing Table
If the selected timing is NOT included in table below, this LCD monitor will use the most suitable available
timing.
SYNC
FRONT
BACK
FH (KHz)
FV (Hz)
SYNC
POLARITY
TOTAL/ ACTIVE
(DOT / LINE)
PIXEL
FOREQ.(MHz)
TIMING NAME
640x350
WIDTH PORCH PORCH
(DOT / LINE)
31.469
70.087
31.469
70.087
31.469
59.94
35
+
–
800
449
800
449
800
525
864
525
832
520
840
500
900
449
900
449
1152
667
1024
625
1056
628
1040
666
1056
625
1088
517
1344
806
1328
816
1328
806
640
350
640
400
640
480
640
480
640
480
640
480
720
400
720
400
832
624
800
600
800
600
800
600
800
600
848
480
1024
768
1024
768
1024
768
96
2
16
37
16
12
16
10
64
3
48
60
25.175
25.175
25.175
30.24
31.5
VGA-350
640x400
–
96
2
48
VGA-GRAPH
640x480
+
–
35
96
2
48
VGA-480
–
33
640x480
–
64
3
96
APPLE MAC-480
640x480
66.67
37.861
72.809
37.5
–
39
–
40
3
16
1
120
20
VESA-480-72Hz
640x480
–
–
64
3
16
1
120
16
31.5
VESA-480-75Hz
720x350
75
–
31.47
70.087
31.469
70.087
49.725
74.55
35.156
56.25
37.879
60.317
48.077
72.188
46.875
75
+
–
108
2
18
37
18
12
32
1
54
28.322
28.322
57.2832
36
70Hz
60
720x400
–
108
2
54
VGA-400-TEXT
832x624
+
–
35
64
3
224
39
APPLE MAC-800
800x600
–
+
+
+
+
+
+
+
+
+
+
–
72
2
24
1
128
22
SVGA
800x600
128
4
40
1
88
40
VESA-600-60Hz
800x600
23
120
6
56
37
16
1
64
50
VESA-600-72Hz
800x600
23
80
3
160
21
49.5
VESA-600-75Hz
848x480
31.02
60
112
8
16
6
112
23
33.75
65
VESA
1024x768
XGA
48.363
60.004
53.964
66.132
56.476
70.069
136
6
24
3
160
29
–
1024x768
COMPAQ-XGA
1024x768
VESA-768-70Hz
+
+
–
176
4
16
8
112
36
71.664
75
136
6
24
3
144
29
–
14
SYNC
FRONT
BACK
FH (KHz)
FV (Hz)
SYNC
POLARITY
TOTAL/ ACTIVE
(DOT / LINE)
PIXEL
FOREQ.(MHz)
WIDTH PORCH PORCH
TIMING NAME
(DOT / LINE)
1024x768
VESA-768-75Hz
1024x768
1152x864
(60Hz)
60.023
75.029
60.24
54.054
59.27
63.851
70.012
67.5
+
+
–
1312
800
1024
768
96
3
16
1
176
28
78.75
80
1328
1480
912
1024
1152
864
96
96
3
32
40
13
32
1
176
192
32
+
+
+
+
+
+
–
80
1152x864
(70Hz)
1480
912
1152
864
96
3
200
44
94.499
108
1152x864
(75Hz)
1600
900
1152
864
128
2
64
2
256
32
75
1152x870
(75Hz)
68.68
75.06
44.772
59.855
60
1456
915
1152
870
128
3
32
3
144
39
100
–
1280x720
(60Hz)
–
1664
748
1280
720
128
5
64
3
192
20
74.5
108
+
+
+
+
+
+
+
+
+
+
+
+
+
+
–
1280x960
(60Hz)
1800
1000
1800
1000
1800
1000
1688
1066
1688
1066
1792
795
1280
960
112
3
96
1
312
36
60
1280x960
(70Hz)
70
1280
960
112
3
96
1
312
36
126
70
1280x960
(75Hz)
75
1280
960
112
3
96
1
312
36
135
75
1280x1024
VESA-1024-60Hz
1280x1024
VESA-1024-75Hz
1360x768
60Hz
64
1280
1024
1280
1024
1360
768
112
3
48
1
248
38
108
60
80
144
3
16
1
248
38
135
75
75
112
6
64
3
256
18
85.5
88.75
106.5
136.75
119
75
1440x900
Red. BLKing 60Hz
1440x900
60Hz
55.469
59.901
55.935
59.887
70.635
74.984
64.674
59.883
65.29
59.954
82.306
74.892
1600
926
1440
900
32
6
48
3
80
17
–
1904
934
1440
900
152
6
80
3
232
25
+
–
1440x900
75Hz
1936
942
1440
900
152
6
96
3
248
33
+
+
–
1680x1050
Red. BLKing 60Hz
1680x1050
60Hz
1840
1080
2240
1089
2272
1099
1680
1050
1680
1050
1680
1050
32
6
48
3
80
21
–
176
6
104
3
280
30
146.25
187
+
–
1680x1050
75Hz
176
6
120
3
296
40
+
Note :
DVI does not support 1680x1050@75Hz. Mode 640x350, 640x400 and 720x400 is centered in the middle of
15
the display and cannot be expanded to full screen.
16
Troubleshooting
This LCD Monitor has pre-adjusted using factory standard VGA timings. Due to the output timing differences
among various VGA cards in the market, users may initially experience an unstable or unclear display whenever
a new display mode or new VGA card is selected.
Attention
This LCD Monitor Supports Multiple VGA Modes.
Refer to the Standard Timing Table for a listing of modes supported by this LCD Monitor.
PROBLEM Picture is unclear and unstable
The picture is unclear and unstable, please perform the following steps:
1. Enter PC to “Shut Down Windows” status while you’re in MS-Windows environment.
2. Check the screen to see if there’s any black vertical stripes appear. If there are, take advantage of
the “Clock” function in OSD menu and adjust (by increment or decrement numbers) until those
bars disappear.
3. Move to “Phase” function in OSD menu again and adjust the monitor screen to its most clear
display.
4. Click “No” on “Shut Down Windows” and back to the normal PC operating environment.
PROBLEM There is no picture on LCD Monitor
If there’s no picture on the LCD Monitor, please perform the following steps:
1. Make sure the power indicator on the LCD Monitor is ON, all connections are secured, and the
system is running on the correct timing. Refer to Chapter 3 for information on timing.
2. Turn off the LCD Monitor and then turn it back on again. If there is still no picture, press the
Adjustment Control button several times.
3. If step 2 doesn’t work, connect your PC system to another external CRT. If your PC system
Functions properly with a CRT Monitor but it does not function with the LCD Monitor, the output
timing of the VGA card may be out of the LCD’s synchronous range. Please change to an alternative
mode listed in the Standard Timing Table or replace the VGA card, and then repeat steps 1 and 2.
PROBLEM There is no picture on LCD Monitor
If you have chosen an output timing that is outside of the LCD Monitor’s synchronous range
(Horizontal: 30 ~ 80 kHz and Vertical: 56 ~ 75 Hz), the OSD will display a “Out of Range” message.
Choose a mode that is supported by your LCD Monitor.
Also, if the signal cable is not connected to LCD monitor at all or properly, the monitor screen will
display a message “No Input Signal”.
17
Product Registration and Technical Support
Register Your Planar Products Today
Thank you choosing Planar. To assure you receive all the benefits of your Planar product
and services, register your Planar product today.
Visit our website to register your product at
Cables, Replacement Lamps, Accessories
To find cables, replacement lamps and accessories for your Planar projector, LCD monitor,
Technical Support
touch screen drivers, warranty information and access to Planar's Technical Library for online
troubleshooting.
To speak with Planar Customer Support please have you model and serial number available
and dial:
Planar Support
Tel: 1-866-PLANAR1 (866-752-6271) or +1 503-748-5799 outside the US.
Hours: 24 hours a day, 7 days a week.
Toll or long distance charges may apply.
18
|