Key Finder
LEVEL INDICATOR
CD PLAYER
CD Loading Slot
RESET button
Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your
musical enjoyment. Now it’s time to consider how you can maximize the fun and excitement your
equipment offers. This manufacturer and the Electronic Industries Association’s Consumer
Electronics Group want you to get the most out of your equipment by playing it at a safe level. One
that lets the sound come through loud and clear without annoying blaring or distortion – and, most
importantly, without affecting your sensitive hearing.
Sound can be deceiving. Over time your hearing “comfort level” adapts to higher volumes of
sound. So what sounds “normal” can actually be loud and harmful to your hearing. Guard against
this by setting your equipment at a safe level BEFORE your hearing adapts.
DISPLAY buttons
To establish a safe level:
• Start your volume control at a low setting.
EJECT button
• Slowly increase the sound until you can hear it comfortably and clearly, and without distortion.
Once you have established a comfortable sound level:
• Set the dial and leave it there.
Taking a minute to do this now will help to prevent hearing damage or loss in the future. After all,
we want you listening for a lifetime.
Specifications
We Want You Listening For A Lifetime
Operation Manual
Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment. Since
hearing damage from loud noise is often undetectable until it is too late, this manufacturer and the
Electronic Industries Association’s Consumer Electronics Group recommend you avoid prolonged
exposure to excessive noise. This list of sound levels is included for your protection.
General
CD player
Power source .......... 14.4 V DC (10.8 – 15.1 V allowable)
Grounding system ........................................ Negative type
Max. current consumption ............................................ 1 A
Dimensions
System .................................... Compact disc audio system
Usable discs .................................................. Compact disc
Signal format .................... Sampling frequency: 44.1 kHz
Number of quantizatin bits: 16; linear
Decibel
Level Example
CDS-P4000
(DIN) (mounting size)
Frequency characteristics .............. 5 – 20,000 Hz (±1 dB)
Signal-to-noise ratio ...... 94 dB (1 kHz) (IHF-A network)
Dynamic range ............................................ 92 dB (1 kHz)
Number of channels ............................................ 2 (stereo)
........................ 178 (W) × 50 (H) × 153 (D) mm
[7 (W) × 2 (H) × 6 (D) in.]
30
40
50
60
70
80
Quiet library, soft whispers.
PIONEER CORPORATION
4-1, MEGURO 1-CHOME, MEGURO-KU, TOKYO 153-8654, JAPAN
Living room, refrigerator, bedroom away from traffic.
Light traffic, normal conversation, quiet office.
Air conditioner at 20 feet, sewing machine.
Vacuum cleaner, hair dryer, noisy restaurant.
Average city traffic, garbage disposals, alarm clock at two feet.
(nose) ................ 188 (W) × 58 (H) × 20 (D) mm
[7-3/8 (W) × 2-1/4 (H) × 3/4 (D) in.]
PIONEER ELECTRONICS (USA) INC.
P.O. Box 1760, Long Beach, California 90801, U.S.A.
TEL: (800) 421-1404
(D) (mounting size)
........................ 178 (W) × 50 (H) × 153 (D) mm
[7 (W) × 2 (H) × 6 (D) in.]
Note:
•
Specifications and the design are subject to possi-
ble modification without notice due to improve-
ments.
PIONEER EUROPE NV
(nose) ................ 170 (W) × 46 (H) × 15 (D) mm
[6-3/4 (W) × 1-3/4 (H) × 5/8 (D) in.]
Haven 1087. Keetberglaan 1, B-9120 Melsele, Belgium
TEL: (0) 3/570.05.11
THE FOLLOWING NOISES CAN BE DANGEROUS UNDER CONSTANT
EXPOSURE
Weight ...................................................... 1.2 kg (2.7 lbs.)
PIONEER ELECTRONICS AUSTRALIA PTY. LTD.
178-184 Boundary Road, Braeside, Victoria 3195, Australia
TEL: (03) 9586-6300
90
100
120
140
180
Subway, motorcycle, truck traffic, lawn mower.
Garbage truck, chain saw, pneumatic drill.
Rock band concert in front of speakers, thunderclap.
Gunshot blast, jet plane.
PIONEER ELECTRONICS OF CANADA, INC.
300 Allstate Parkway, Markham, Ontario L3R OP2, Canada
TEL: (905) 479-4411
Published by Pioneer Corporation.
Copyright © 2001 by Pioneer Corporation.
All rights reserved.
Rocket launching pad.
Information courtesy of the Deafness Research Foundation.
PIONEER ELECTRONICS DE MEXICO, S.A. de C.V.
San Lorenzo 1009 3er. Piso Desp. 302
Col. Del Valle Mexico, D.F. C.P. 03100
TEL: 5-688-52-90
Publication de Pioneer Corporation.
Copyright © 2001 Pioneer Corporation.
Tous droits de reproduction et de traduction
réservés.
Printed in Japan
Imprimé au Japon
<KSNZF/01A00000>
<CRB1631-A> UC
Using the CD Player
Operating with Different Head Units
Key Finder
Basic Operation of CD Player
Entering the Function Menu
This CD Player can be operated only with a separately sold Head Unit.
Instructions in this Operation Manual use a “KEH-P6010” Head Unit as an example.
Operate CD Player functions with the buttons shown below.
The Function Menu lets you operate simple functions for the CD player.
Selecting the CD Player Source
Note:
Head Unit (e.g. KEH-P6010)
•
After entering the Function Menu, if you do not perform an operation within about 30 seconds, the
Function Menu is automatically canceled.
• Press the SOURCE button repeatedly until
the CD Player is selected.
Head Unit-Group 1
This group of Head Units features a FUNCTION button you can use to call up a Function
Menu to operate functions.
Operation using this group of Head Units is the same as with the “KEH-P6010”,
operate following the instructions in this manual.
The CD Player starts playing.
1. Select the desired mode in the Function Menu. (Refer to “Function Menu
functions”.)
5/∞/2/3 buttons
PGM button
Track Search and Fast Forward/Reverse
7 Examples of Group 1 Head Units
• You can select between Track Search or Fast
Forward/Reverse by pressing the 2/3 button for a
different length of time.
KEH-P601
KEH-P690
KEH-P5900
Each press changes the Mode ...
Head Unit-Group 2
This group of Head Units does not feature a FUNCTION button. However, the units allow
different direct operation of functions with dedicated buttons such as a RPT button.
When using the CD Player with this group of Head Units, refer to the Function
Compatibility Chart for Head Unit Group 2.
Track Search
0.5 seconds or less
Continue pressing
2. Operate a mode. (e.g. Repeat Play)
DISPLAY button
Fast Forward/Reverse
FUNCTION button
BAND button
SOURCE button
7 Examples of Group 2 Head Units
Note:
•
If the CD player cannot operate properly, an error message such as
“ERROR-14” is displayed. Refer to “CD Player Troubleshooting”.
KEH-P4010
KEH-P490
KEH-P4900
KEH-P1010*
The button used and the operation it performs are
indicated by the key guidance indicator. Press the
5 button to switch the key guidance indicator ON,
and the ∞ button to switch it OFF.
* This Unit does not feature the “Random Play” and “Scan Play” functions.
Note:
Note:
Play Time Indicator
•
For details concerning operation using the Remote Controller, refer to the Operation Manual of the
•
The Operation Manual for an indivisual Head Unit may feature different instructions for operating a
Head Unit.
CD Player. In such case, refer to those instructions.
3. Cancel the Function Menu.
Function Compatibility Charts
Each function operation described can be executed by pressing the corresponding buttons on
the Head Unit or the remote controller.
7 Head Unit Group 2
Function name
Source Switching
Repeat Play
Button
Operation
SOURCE, SOURCE/OFF
:Select
Track Number Indicator
Displaying Disc Titles
RPT
LOCAL/BSM
LOCAL/BSM (Hold for 2 seconds)
:Select
:Select
:Select
• Press the DISPLAY button to change the Disc
Title display of the current disc.
Random Play
Scan Play
Pause
RPT (Hold for 2 seconds)
LOCAL/BSM (Hold for 2 seconds)
PAUSE/BSM (Hold for 2 seconds)
PAUSE/SCAN (Hold for 2 seconds)
Note:
•
•
•
This function is available only when the Head Unit is connected
to a Multi-CD player.
If you switch displays when no disc titles have been input, “NO
TITLE” is displayed.
Repeat the preceding operation to return to the normal display.
PAUSE/BSM
PAUSE/SCAN
LOCAL/BSM
:Select
:Select
:Select
Track Search
2 or 3 (Hold for 0.5 seconds or less)
2 or 3 (Continue pressing)
Fast Forward/Reverse
Using the CD Player
CD Player and Care
CD Player Troubleshooting
Scan Play (T-SCAN)
Function Menu Functions
Precaution
Error Message
Scan Play plays the first 10 seconds or so of each track on a CD in succession.
The following chart shows functions in the CD Player Function Menu.
This chart shows the function operation and button for each function.
When problems occur with CD playback, an error message appears on the head unit display.
Refer to the table below to identify the problem, then take the suggested corrective action. If
the error persists, contact your dealer or your nearest PIONEER Service Center.
COMPACT
1. Press the FUNCTION button and select the Scan mode (T-SCAN) in the
Function Menu.
• Play only CDs bearing the Compact Disc Digital
Audio mark.
7 CD Player
Function name (Display)
Button
Operation
DIGITAL AUDIO
2. Switch the Scan Play ON with
Repeat Play (REPEAT)
5
∞
5
∞
5
∞
5
∞
:ON
:OFF
the 5 button.
Message
Possible cause
Dirty disc.
Recommended action
Clean the disc.
• This product is designed for use with conventional,
fully circular CDs only. Use of shaped CDs are not
recommended for this product.
ERROR- 11, 12, 17, 30
ERROR- 11, 12, 17, 30
ERROR- 14
Random Play (RANDOM)
Scan Play (T-SCAN)
Pause (PAUSE)
:ON
:OFF
Scratched disc.
Unrecorded CD.
Replace the disc.
Check the disc.
3. When you find the desired
track, cancel the Scan Play by
pressing the ∞ button.
:ON
:OFF
ERROR- 10, 11, 12, 14,
17, 30, A0
Electrical or mechanical
problem.
Turn the ignition ON and OFF, or
switch to a different source, then back
to the CD player.
:ON
:OFF
• Check all CDs before playing and discard cracked, scratched or warped discs.
• Normal playback of CD-R discs other than those recorded with a music CD recorder may
not be possible.
• Playback of music CD-R discs, even those recorded with a music CD recorder, may not
be possible with this product due to disc characteristics or scratches or dirt on the disc.
Dirt or condensation on the lens inside this product may also prevent playback.
• This product conforms to the track skip function of the CD-R disc. The tracks containing
the track skip information are skipped over automatically.
If the Function Menu has been can-
celed automatically, select the Scan
mode in the Function Menu again.
ERROR- 44
HEAT
All tracks are setting track skip. Replace the disc.
CD player overheating. Discontinue play until the machine
temperature drops.
Note:
•
With some Head Units, the Function Menu may feature a CD Sound Quality Adjustment (COMP)
Note:
function. When you combine this CD player with such a Head Unit, if “NO COMP” is displayed, it
indicates that the CD Sound Quality Adjustment function is not available.
•
Scan Play is canceled automatically after all the tracks on a disc have been scanned.
Pause (PAUSE)
Repeat Play (REPEAT)
• Read the precautions with the CD-R discs before using.
Pause pauses the currently playing track.
Repeat Play plays the same track repeatedly.
• Wipe dirty or damp discs outward from the center with a soft cloth.
1. Press the FUNCTION button and select the Pause mode (PAUSE) in the
Function Menu.
1. Press the FUNCTION button and select the Repeat mode (REPEAT) in
the Function Menu.
2. Switch the Pause ON/OFF
2. Switch the Repeat Play
ON/OFF with the 5/∞
buttons.
with the 5/∞ buttons.
• Avoid touching the recorded (iridescent) surface when
handling discs.
• Store discs in their cases when not in use.
• Keep discs out of direct sunlight and high temperatures.
• Do not affix labels or apply chemicals to discs.
Note:
Note:
•
You can also switch the Pause function ON/OFF by pressing the PGM button.
•
If you perform Track Search or Fast Forward/Reverse, Repeat Play is automatically canceled.
• Condensation may collect inside the player when using the heater in cold weather, inter-
fering with playback. Turn it off for an hour or so and wipe damp discs with a soft cloth.
• Road shocks may interrupt CD playback.
Disc Title Input (TITLE IN)
Random Play (RANDOM)
The CD player’s Disc Title Input function is possible for up to 100 discs when a Multi-CD
player is installed.
Random Play plays the tracks on a CD in random order for variety.
The connected Head Unit’s Operation Manual features details concerning operation. Refer
to “Disc Title Input” in the manual’s “Using Multi-CD Players” section.
1. Press the FUNCTION button and select the Random mode (RANDOM) in the
Function Menu.
2. Switch the Random Play
ON/OFF with the 5/∞
buttons.
|