Subwoofer Manual
Manuel de subwoofer
Models: Ti210d4, Ti212d4
Features
Caractéristiques
• Pare-poussière monopièce plaqué aluminum
• Enceinte d’ambiance avec contour en caoutchouc de longue portée
• Anneau de centrage plat à excursion linéaire
• Bobines acoustiques en cuivre exempt d’oxygène à haute température
• Panier rigide en aluminum moulé
• One Piece Aluminum Plated Dustcap
• Long Throw Rubber Surround
• Flat Non-Linear Roll Spider
• High Temperature OFC Voice Coils
• Rigid Cast Aluminum Frame
• Bornes d’enceinte nickelées de calibre 12
• Modèle de moteur à grand battement
• Nickel Plated 12 Gauge Speaker Terminals
• High Excursion Motor Design
Subwoofer Owner’s Manual
system diagrams
Dual 4 ohm Subwoofer
Ti212d4 SINGLE
SUBWOOFER SYSTEM
+
+
-
R500.1 + (1) Ti212d4
All voice coils are wired in parallel for 2 ohm load.
R500.1 makes maximum power into 2 ohm load.
-
Toutes les bobines mobiles sont câblées en parallèle de 2
Ohms. R250.1 et R500.1 faire puissance maximale en 2 Ohms.
Dual 4 ohm Subwoofers
+ +
Ti212d4 DUAL
SUBWOOFER SYSTEM
Ti1500.1 + (2) Ti212d4
+
-
+
-
All voice coils are wired in parallel for 1 ohm load.
Ti1500.1 makes maximum power into 1 ohm load.
-
-
Toutes les bobines mobiles sont câblées en parallèle
pour 1 Ohms. Ti1500.1 rend la puissance maximale de
charge en 1 ohm.
Specifications
T/S Parameters:
Re (Dcr)
FS (Hz)
Ti212d4
1.23
Specifications:
Ti210d4
Ti212d4
600 watts
1200 watts
40mm
Ti210d4
1.65
36.7
.037
10.5
4.35
.69
RMS Power Handling
PEAK Power Handling
Xmax (Peak to Peak)
Mounting Diameter
Mounting Depth
600 watts
1200 watts
40mm
32.6
Sd (SqM)
BL TM
.053
8 7/8in - 226mm 10 7/8in - 276mm
6in -150mm 6 1/2in - 164mm
11.3
Qms
5.38
Qes
0.51
Qts
0.46
.59
Vas (liters)
Cms (uM/N)
Mms (gms)
SPL
36.3
16
93
90
257.91
91dB
Dual 4
190.81
91dB
Dual 4
Impedance
*Specifications subject to change
Phoenix Gold
A Division of AAMP of America™
13190 56th Court
Clearwater, Florida 33760
P: 866-788-4237
© 2011 AAMP of Florida, Inc
Designed and Engineered in the USA
LIMITED WARRANTY
Phoenix Gold warrants this product to be free of defects in materials and workmanship for a period of one (1) year from the original date of purchase. This
warranty is not transferable and applies only to the original purchaser from an authorized Phoenix Gold dealer in the United States of America only. Should
service be necessary under this warranty for any reason due to manufacturing defect or malfunction, Phoenix Gold will (at its discretion), repair or replace the
defective product with new or remanufactured product at no charge. Damage caused by the following is not covered under warranty: accident, misuse, abuse,
product modification or neglect, failure to follow installation instructions, unauthorized repair attempts, misrepresentations by the seller. This warranty does not
cover incidental or consequential damages and does not cover the cost of removing or reinstalling the unit(s). Cosmetic damage due to accident or normal wear
and tear is not covered under warranty.
INTERNATIONAL WARRANTIES:
Products purchased outside the United States of America are covered only by that country’s Authorized Phoenix Gold reseller and not by Phoenix Gold.
Consumers needing service or warranty information for these products must contact that country’s reseller for information.
|