E1 Series Emergency Lighting E1
Page 1 of 2
6 Volt 12 to 25 Watts Thermoplastic Housing
The E1 Series is a decorative emergency lighting product with integral lamps. Ideal for wall or ceiling mount applications, the E1 Series’ unique design will allow
Complete Fixture consists of unit and two lamp reflector systems. Select options and accessories below.
How to Specify:
E1
SERIES
BATTERY/
WATTAGE
LAMP
TYPE
HOUSING
COLOR
1
E1 = 6V Thermoplastic
Emergency Lighting Unit
Lead Calcium
T6 = Tungsten 5.4W
T7 = Tungsten 7W
T9 = Tungsten 9W
H7 = Halogen 7W
H12 = Halogen 12W
W = White
B = Black
12L = 12W Unit
18L = 18W Unit
25L = 25W Unit
Nickel Cadmium
12N = 12W Unit
14N = 14W Unit
18N = 18W Unit
25N = 25W Unit
3
3
3
3
3
Accessories (ordered separately)
SCKTW = Ceiling Mount Canopy, White
SCKTB = Ceiling Mount Canopy, Black
WG5 = Wire Guard
Features
1. Illumination: Includes two high performance lamp reflector systems inte-
gral to the housing. Each lamp reflector system can be adjusted 180° verti-
cally and horizontally.
PCS1 = Polycarbonate Vandal Shield
2. Housing: Constructed of impact resistant, UL 94 V-0, 5VA white or black
thermoplastic. Easy to install with its snap-together backplate and housing.
3. Electronics: 120/277 VAC dual voltage input with surge-protected, solid-
state circuitry. Charging system is complete with low voltage disconnect, AC
lockout, brownout protection, AC indicator lamp and test switch.
4. Battery: Maintenance free, sealed lead calcium battery has an estimated
service life of 5 years, and an operating temperature range of 65°F (19°C) to
85°F (30°C). Maintenance free, sealed nickel cadmium battery has an esti-
mated service life of 10 years, and an operating temperature range of 20°F
(-7°C) to 95°F (35°C).
NOTES:
1) Selected lamp wattage cannot exceed unit output rating.
2) Not available for use with SD and SDTD options.
3) Selected models are available with damp location option.
4) Not available for use with DL option.
5. Input Power Requirements: 12w unit: 0.112 amps (120 VAC), 0.062 amps
(277 VAC); 14-25w unit: 0.077 amps (120 VAC), 0.034 amps (277 VAC)
Job Information
Type:
Job Name:
Cat. No.:
Code Compliance
UL 924 listed, UL damp location listing on selected units only.
Options (add to end of catalog number)
4
Lamp(s):
Notes:
SD = Self-Diagnostics
V = Voltmeter (not available with Ammeter (A) option) 2
A = Ammeter (not available with Voltmeter (V) option) 2
ST = Special Input Transformer (specify voltage and frequency)
SDTD = Self-Diagnostics with Time Delay
DL = UL Damp Location Listing (Consult factory) 3
LCK1 = Line Cord (6’, 120 VAC field installed)
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
Multiple option configurations may void UL listing. Consult factory for specifics.
Lightolier is a Philips group brand
|