Philips Portable CD Player AX 1100 00 User Manual

Portable CD Player  
Audio  
AX  
AX  
1100  
1101  
Portable CD Player  
English  
Français  
Español  
Deutsch  
Meet Philips at the Internet  
CLASS 1  
LASER PRODUCT  
AX1100  
AX1101  
Printed in China  
 
English  
BATTERIES (supplied or optionally available)  
CONTROLS  
You can use the following batteries with this CD-player:  
1 MODE .................selects the different playing possibilities: SHUFFLE,  
normal batteries type LR6, UM3 or AA (preferably Philips), or  
alkaline batteries type LR6, UM3 or AA (preferably Philips).  
SHUFFLE REPEAT ALL, REPEAT and REPEAT ALL  
2 BASS...................switches the bass enhancement on and off. This button also  
switches acoustic feedback (the beep) on/off when it is  
pressed for more than 2 seconds  
Note: – Old and new or different types of batteries should not be used in com-  
bination. Remove batteries if they are empty or if the player is  
not going to be used for a long time.  
3 2; ......................switches the player on, starts or pauses CD play  
4 9.........................stops CD play, clears a program or switches the player off  
5 ............................display  
Inserting batteries  
Open the battery compartment and insert either  
2 normal or alkaline batteries.  
6 .......................skips and searches CD tracks backwards  
7 § .......................skips and searches CD tracks forwards  
8 OPEN 2 ..............opens the CD lid  
Battery indication  
The approximate power level of your batteries is shown  
in the display.  
If  
is shown or flashing (depending on the  
9 VOL E ............adjusts the volume  
version) and bAttis displayed, the batteries are  
empty.  
0 p/LINE OUT........3.5 mm headphone socket, socket to connect the player to  
another audio input of an additional appliance  
! OFF......................switches RESUME and HOLD off  
RESUME .............stores the last position of a CD track played  
HOLD...................locks all buttons  
Average playing time of batteries under normal conditions  
Battery type  
Playing time  
Normal  
7 hours  
Alkaline  
20 hours  
@ PROGRAM ..........programs tracks and reviews the program  
# 4.5V DC...............socket for external power supply  
$ ............................typeplate  
Batteries contain chemical substances, so they should be disposed  
of properly.  
% ............................battery compartment  
CD PLAYER AND CD HANDLING  
POWER ADAPTER (supplied or optionally available)  
Do not touch the lens A of the CD player.  
Use only the AY 3170 adapter (4.5 V/300 mA direct  
current, positive pole to the centre pin). Any other  
product may damage the player.  
Do not expose the unit, batteries or CDs to humidity,  
rain, sand or excessive heat (caused by heating  
equipment or direct sunlight).  
D
C
4
,5  
V
1
Make sure that the adapters voltage corresponds to  
the local voltage.  
You can clean the CD player with a soft, slightly  
dampened, lint-free cloth. Do not use any cleaning  
agents as they may have a corrosive effect.  
2
Connect the adapter to the 4.5V DC socket of the player and to the wall sock-  
et.  
To clean the CD, wipe it in a straight line from the center toward the edge  
using a soft, lint-free cloth. A cleaning agent may damage the disc! Never  
write on a CD or attach a sticker to it.  
Note: Always disconnect the adapter when you are not using it.  
The lens may cloud over when the unit is moved suddenly from cold to warm  
surroundings. Playing a CD is not possible then. Leave the CD player in a warm  
environment until the moisture has evaporated.  
HEADPHONES HE 035  
Connect the supplied headphones to the p/LINE OUT  
Active mobile phones in the vicinity of the CD player may cause malfunctions.  
Avoid dropping the unit as this may cause damage.  
socket of the player.  
Note: p/LINE OUT can also be used for connecting the  
player to your HiFi system (with a signal lead) or to  
your car radio (with a cassette adapter or signal  
lead). In both cases, the volume of the player must  
be set to position 8.  
ENVIRONMENTAL INFORMATION  
All redundant packing material has been omitted. We have done our best to  
make the packaging easily separable into two materials: cardboard and  
polyethylene.  
IMPORTANT!  
Your unit consists of materials which can be recycled if disassembled by a  
specialized company. Please observe the local regulations regarding the  
disposal of packing materials, exhausted batteries and old equipment.  
Hearing safety: Do not play your headphones at a high volume. Hearing experts  
advise that continuous use at high volume can permanently damage your hearing.  
Traffic safety: Do not use headphones while driving a vehicle. It may create a  
hazard and it is illegal in many countries. Even if your headphones are an open-air  
type designed to let you hear outside sounds, do not turn up the volume so high  
that you cannot hear what is going on around you.  
CAUTION  
Use of controls or adjustments or performance of procedures other than  
herein may result in hazardous radiation exposure.  
 
PLAYING A CD  
SELECTING A TRACK AND SEARCHING  
Selecting a track during playback  
Briefly press or § once or several times to skip  
to the beginning of the current, previous or next track.  
yPlayback continues with the selected track, and  
its number is displayed.  
This CD player can play all kinds of Audio Discs such as  
CD-Recordables and CD-Rewritables. Do not try to play a  
CD-ROM, CDi, VCD, DVD or computer CD.  
MODE  
PROGRAM  
1
2
Push OPEN 2 to open the CD compartment lid.  
Insert an audio CD, printed side up, by pressing the  
CD center onto the hub.  
Selecting a track when playback is stopped  
1
Briefly press or § once or several times.  
yThe selected track number is displayed.  
3
4
Close the player by pressing the lid down.  
MODE  
2
Press 2; to start CD play.  
yPlayback starts with the selected track.  
Press 2; to switch the player on and start  
CD playback.  
yThe current track number and the elapsed  
playing time are displayed.  
Searching for a passage during playback  
Keep or § pressed to find a particular passage in  
a backward or forward direction.  
ySearching is started and playback continues at  
low volume. After 2 seconds the search speed increases.  
1
5
You can pause playback by pressing 2;.  
yThe time where playback was paused will flash.  
You can continue playback by pressing 2; again.  
2
Release the button when you reach the desired passage.  
yNormal playback continues from this position.  
Press 9 to stop playback.  
yThe total number of tracks and the total playing  
time of the CD are displayed.  
Notes: – During SHUFFLE, SHUFFLE REPEAT ALL, REPEAT  
or while playing a program, searching is only  
possible within the particular track.  
6
Press 9 again to switch off the player.  
To remove the CD, hold it by its edge and press the  
hub gently while lifting the CD.  
Note: If there is no activity, the unit will automatically  
switch off after a while to save energy.  
PLAYBACK INFORMATION  
PROGRAMMING TRACK NUMBERS  
You can select up to 15 tracks to play in a program.  
A single track may be played more than once in  
the program.  
If a CD-Recordable (CD-R) or a CD-Rewritable (CD-RW) is not recorded  
properly, nF dISCis displayed. In that case, use FINALIZE on your CD-  
recorder to complete the recording.  
MODE  
PROGRAM  
If you want to play a CD-Rewritable (CD-RW), it takes 3–15 seconds for sound  
reproduction to start once you have pressed 2;.  
1
2
While playback is stopped, select a track with  
or §.  
Press PROGRAM to store the track.  
yPROGRAM lights; the track number  
programmed and P, with the total number of  
stored tracks, are displayed.  
Playback will stop if you open the CD lid.  
While the CD is being read, 1-:-flashes in the display.  
3
4
Select and store all desired tracks in this way.  
VOLUME AND BASS  
Press 2; to start playback of your selected tracks.  
yPROGRAM is shown and playback starts.  
Volume adjustment  
Adjust the volume by using VOL E.  
You can review the program by pressing PROGRAM  
for more than 2 seconds.  
yThe display shows all stored tracks in sequence.  
Bass adjustment  
Press BASS to switch the bass enhancement on or off  
Notes: – If you press PROGRAM and no track is selected, SELECtis displayed.  
MODE  
PROGRAM  
– If you try to store more than 15 tracks, FULLis displayed.  
y
is shown if the bass enhancement is  
activated.  
Clearing the program  
While playback is stopped, press 9 to clear program.  
yCLEAris displayed once, PROGRAM  
disappears, and the program is cleared.  
Notes: – The program also will be cleared if you  
– interrupt the power supply, or  
– open the CD compartment lid, or  
– if the unit switches off automatically.  
This product complies with the radio interference requirements of the  
European Union.  
Both the model number and production number are located on the  
bottom of the set.  
 
MODE  
TROUBLESHOOTING  
It is possible to play tracks in random order, to repeat a  
single track or the entire CD.  
If a fault occurs, first check the points listed below before taking the set for repair.  
If you are unable to remedy a problem by following these hints, consult your dealer or  
service centre.  
WARNING: Under no circumstances should you try to repair the set yourself, as this  
will invalidate the guarantee. Do not open the set as there is a risk of  
electric shock!  
MODE  
PROGRAM  
1
Press MODE during playback as often as required in  
order to activate one of the following ‘modes’. The  
active mode is shown in the display.  
ySHUFFLE: All tracks of the CD are played in random  
No power, playback does not start  
Batteries  
order until all of them have been played once.  
y
SHUFFLE REPEAT ALL: All tracks of the CD are played  
Batteries inserted incorrectly  
Insert the batteries correctly  
Batteries are empty  
repeatedly in random order.  
yREPEAT: The current track is played repeatedly.  
yREPEAT ALL: The entire CD is played repeatedly.  
Change the batteries  
Contact pins are dirty  
Clean them with a cloth  
Mains adapter  
2
Playback starts in the chosen mode after 2 seconds.  
To return to normal playback, press MODE repeatedly  
until the display shows no active modes.  
Loose connection  
Connect the adapter securely  
no diSCindication  
The CD is badly scratched or dirty  
Replace or clean the CD  
CD is not or incorrectly inserted  
Insert a CD, label upwards  
The laser lens is steamed up  
Wait until the lens has cleared  
nF diSCindication  
RESUME  
CD-RW (CD-R) is not recorded  
You can interrupt playback and continue (even after an  
extended period of time) from the position where  
playback stopped (RESUME) and you can lock all buttons  
of the set so that no action will be executed (HOLD). Use  
the RESUME–HOLD–OFF slider for these functions.  
Use FINALIZE on the properly. CD recorder to complete the recording  
L
HoLdindication and/or no reaction to controls  
L
HOLD is activated  
Deactivate HOLD  
1
Switch the slider to RESUME during playback to  
activate RESUME.  
yRESUME is shown.  
Electrostatic discharge  
Disconnect the set from power supply or take out the batteries for a few seconds  
The CD skips tracks  
2
3
Press 9 whenever you want to stop playback.  
The CD is damaged or dirty  
Replace or clean the CD  
RESUME, SHUFFLE or PROGRAM is active  
Switch RESUME, SHUFFLE or PROGRAM off  
Press 2; whenever you want to resume playback.  
yRESUME is shown and playback continues from  
where you have stopped last.  
To deactivate RESUME, switch the slider to OFF.  
yRESUME goes off.  
No sound or bad sound quality  
PAUSE is activated  
Press 2;  
Loose, wrong or dirty connections  
Check and clean connections  
Volume is not adjusted  
Adjust the volume  
Malfunctions due to nearness of active mobile phones  
Keep the player away from active mobile phones  
Strong magnetic fields near the player  
Change the players position or connections  
HOLD  
You can lock the buttons of the set by switching the  
slider to HOLD. Now, when a key is pressed, no action  
will be executed. This is of use, for example, when  
transporting the player in a bag. With HOLD activated,  
you can avoid accidental activation of other functions.  
L
L
1
Switch the slider to HOLD to activate HOLD.  
yAll buttons are locked. HoLdis shown when  
you press any button. If the set is switched off,  
HoLdwill be shown only when 2; is pressed.  
2
To deactivate HOLD, switch the slider to OFF.  
Note: If you deactivate HOLD by switching the slider to  
RESUME, you will be activating the RESUME  
function.  
 

Pelco Switch FR8304 User Manual
Pelco Water Dispenser C2237M User Manual
Philips Clock Radio AJ 3015 User Manual
Philips Home Theater System LX7500R 01 User Manual
Philips Indoor Furnishings SB3B1819 User Manual
Philips SONAR HR2200 User Manual
Planet Technology Switch WGSW 2402A User Manual
Planet Technology Telephone VIP 254T User Manual
Porter Cable Cordless Telephone KALA 300 User Manual
Printek Network Card Mt3 II Series User Manual