Philips MP3 Docking Station AJ300D User Manual

Docking Entertainment System  
AJ300D  
User manual  
wnload from Www.Somanuals.com. All Manuals Search And Downlo  
2
3
4
wnload from Www.Somanuals.com. All Manuals Search And Downlo  
English  
SUPPLIED ACCESSORIES  
1 X AC/DC 18V adapter  
Docking kit  
• 1 X Apple iPod dock (pre-installed with AJ300D);1 X Philips GoGear jukebox  
dock;  
• dock adapters (8 adapters for different iPod types, and 4 adapters for  
different Philips GoGear types)  
1 X AUX-IN cable  
CONTROLS (See 1)  
1
POWER  
switches the system on or to standby mode  
stops active alarm for 24 hours  
deactivates the sleep function  
¡1 / 2™  
2
adjust clock/alarm time  
selects previous/next tracks in the dock mode  
fast searches forward/backward in the dock mode (only available to iPod)  
PRESET 1-5  
stores, recalls and shows radio station  
SLEEP  
3
4
activates the sleep function  
deactivates the sleep function  
DOCK  
5
6
selects dock mode for Apple iPod and Philips GoGear  
TUNER/ AUX  
selects FM radio mode  
selects AUX mode  
2;  
7
starts/pauses playback in the dock mode  
selects 12 hour or 24 hour mode  
VOL+/-  
8
wnload from Www.Somanuals.com. All Manuals Search And Downlo  
adjusts the sound level  
9
0
!
@
MUTE  
switches playback sound off and on.  
Display  
shows clock/alarm times and status of the set  
Dock connector (30 pins)  
connects iPod/Philips GoGear player  
ALM 2  
activates/confirm ALARM 2 time setting  
displays ALARM 2 time  
switches off ALARM 2 time  
REPEAT ALARM / BRIGHTNESS CONTROL  
switches off the alarm for a 9 minute period  
changes the brightness of the display illumination  
POWER jack  
#
$
socket for AC/DC 18V adapter  
Pigtail improves FM reception  
ALM  
%
^
1
activates/confirm ALARM 1 time setting  
displays ALARM 1 time  
switches off ALARM 1 time  
&
*
(
)
TIME SET  
activates/confirm clock time/date setting  
(Wake-up mode) DOCKBUZZER TUNER  
selects alarm mode: dock, buzzer or radio  
AUX IN jack (3.5 mm)  
connects to external audio source  
RESET  
clears clock time setting  
POWER SUPPLY  
Mains adapter  
1
Connect the mains adapter to the set's DC 18V socket and to the power socket.  
Helpful hints: To avoid damage to the set, use only the adapter supplied!  
wnload from Www.Somanuals.com. All Manuals Search And Downlo  
The type plate is located on the bottom of the set.  
Remote control  
Important!  
Before using the remote control, remove the insulation plastic tab as  
shown in the figure.  
If the remote control does not function correctly or the operating  
range is reduced, replace the battery with a new (CR2025) type  
battery.  
1. Pull the battery tray out as shown in the figure.  
2. Replace a new battery according to polarity indication, and fully insert the  
battery tray back to the original position.  
2
3
1
Battery contain chemical substances, so they should be disposed of  
properly.  
SELF-POWERED BACK-UP  
The self-powered back-up conveniently allows your preset stations, alarm and clock  
time settings to be stored for up to 10 minutes when there is a power interruption  
e.g. AC power failure. The complete clock radio and backlight illumination will be  
switched off.  
If power supply returns after 10 minutes and the display shows:  
clock time blinking - indicates you need to re-adjust the clock time.  
CAUTION  
Visible and invisible laser radiation. If the cover is open, do not look  
at the beam.  
High voltage! Do not open.You run the risk of getting an electric  
shock. The machine does not contain any user-serviceable parts.  
Modification of the product could result in hazardous radiation of  
EMC or other unsafe operation.  
This product complies with the radio interference requirements of  
wnload from Www.Somanuals.com. All Manuals Search And Downlo  
the European Community.  
BASIC OPERATION.  
Switching on the system  
Press POWER.  
The system will switch to the last selected source.  
Press TUNER/AUX or DOCK.  
The system will switch to the selected source.  
Switching the system to standby mode  
In any source mode, press POWER.  
Switching off the volume temporarily  
Press MUTE on the remote control to stop sound play-back instantly.  
Playback will continue without sound and the display shows MUTE .  
To start sound playback you can:  
– press MUTE again;  
– adjust the volume controls;  
– change source.  
Illumination brightness  
Press REPEAT ALARM / BRIGHTNESS CONTROL once or more.  
The brightness of the display can be adjusted:  
Bright Low Off Bright  
.
SETTING THE CLOCK AND DATE  
1. In any mode, press and hold TIME SET until clock digits flashes.  
2. Press 2; to select 12 Hours/ 24 Hours mode.  
3. Hold down or press ¡1 / 2™ repeatedly to set and adjust the hours.  
4. Press TIME SET to confirm.  
The clock digits for the minutes flash.  
5. Repeat the steps 3 - 4 until you complete all the other settings for minutes,  
year, month and days.  
wnload from Www.Somanuals.com. All Manuals Search And Downlo  
TUNER  
1
Press TUNER/AUX once to switch on the radio (FM only).  
Display shows the radio frequency of the last selected waveband. Your pre-  
set station is also shown if you are listening to a preset. See 2  
Adjust the sound using VOL+/-  
To select preset stations, press the respective PRESET button (1-5).  
(
)
2
3
.
TUNING TO RADIO STATIONS  
1
Press and hold ¡1 / 2™ until the frequency in the display starts changing.  
Display shows “Scrh” during automatic tuning.  
After the system tunes to a station of sufficient reception, display shows its frequency.  
To tune to a weak station, press ¡1 / 2briefly and repeatedly until an  
optimal reception is found.  
To improve reception (FM):  
Extend and position the pigtail fully to obtain optimum reception.  
STORING AND USING PRESET STATIONS  
You can store up to 5 FM radio stations in the memory.  
1
2
Tune to your desired station (see TUNING TO RADIO STATIONS).  
To store a preset, hold down briefly on a PRESET button 1-5 until you hear a dou-  
ble beep.  
Display shows the preset number of your station.  
Repeat steps 1 and 2 to store your other stations.  
You can overwrite a preset station by storing another frequency in its place.  
Press a PRESET button 1-5 (or PRESET 4 / 3 on the remote control) to listen to  
a preset station.  
3
4
To display clock time, press 2; on the set.  
USING THE ALARM  
GENERAL  
Two different alarm times can be set. This can be useful when you need to be  
woken up at a different time e.g. during the week and at the weekend, and you  
can set different wake-up modes:  
tuner mode.  
buzzer mode. The gentle wake buzzer alarm increases its beep tone frequency within seconds.  
wnload from Www.Somanuals.com. All Manuals Search And Downlo  
dock mode (only for Apple iPod and Philips GoGear SA9100 and SA9200)  
SETTING THE ALARM TIME (See 3)  
In any mode, press and hold ALM1 or ALM2 for two seconds.  
ALM1 ALM2 icon and the hour digits flash. And the icon for the current  
1
/
alarm mode also flashes.  
Hold down or press ¡1 / 2™ repeatedly to set and adjust the hours.  
Press ALM1 or ALM2 to confirm.  
2
3
ALM1 ALM2 icon and the minutes digits flash. And the icon for the cur-  
/
rent alarm mode also flashes.  
Hold down or press ¡1 / 2™ repeatedly to set and adjust the mintues.  
Press ALM1 or ALM2 to confirm.  
4
5
SETTING THE ALARM MODE  
1
2
Press POWER to switch to standby mode.  
Select your choice of alarm mode: either docked player (only for Apple iPod and  
Philips GoGear SA9100 and SA9200), buzzer, or radio by using the  
DOCKBUZZER TUNER slider.  
At the set alarm time, the docked player (only for Apple iPod and Philips GoGear  
SA9100 and SA9200) or radio or buzzer will switch on automatically.  
Helpful hints:  
If you have selected TUNER alarm mode, make sure you have properly tuned to a  
station before turning off the set.  
If you have selected DOCK alarm mode (only for Apple iPod and Philips GoGear  
SA9100 and SA9200), make sure you have docked the compatible player, or the  
buzzer mode will be selected automatically.  
To check the alarm time setting for ALM1 or ALM2, press ALM1 or ALM2.  
SWITCHING OFF THE ALARM  
There are three ways of switching off the alarm. Unless you cancel the alarm  
completely, the 24-hour ALARM RESET will be automatically selected after 59  
minutes from the time your alarm first goes off.  
24 HOUR ALARM RESET  
If you want the alarm mode to be stopped immediately but also wish to retain  
the same alarm setting for the following day:  
wnload from Www.Somanuals.com. All Manuals Search And Downlo  
Press POWER.  
REPEAT ALARM  
This repeats your alarm call at 9 minute intervals.  
During the alarm call, press REPEAT ALARM / BRIGHTNESS CONTROL..  
Display shows ALM1 or ALM2 flashing during a repeat alarm.  
Repeat if desired (up to a maximum of 6 times).  
CANCELING THE ALARM COMPLETELY  
Press ALM 1 or ALM 2 button once or more until ALM1 or ALM2 disappears.  
DOCK (See 4)  
By connecting the iPod/Philips GoGear to your AJ300D, you can listen to the  
sound of the docked player through the powerful speakers of the Hi-Fi system.  
Important!  
AJ300D comes with two dock types. Use the designated dock type, as  
indicated on the top panel of the dock supplied, to work with either  
Apple iPod or Philips GoGear.  
COMPATIBLE PORTABLE PLAYER  
Most Apple iPod models with 30-pin dock connector as follows:  
20GB, 40GB, 20/30GB photo, 40/60GB photo, 30GB video, 60GB video, mini  
and nano.  
Philips GoGear players with dock connectors as follows:  
- HDD1420, HDD1620, HDD1630, HDD1635;  
- HDD1820, HDD1830, HDD1835;  
- HDD1840, 1850;  
- HDD6320, HDD6330  
- SA9100, SA9200  
CHANGING THE DOCK  
The iPod connector is pre-installed with the AJ300D main unit. For Philips  
GoGear users, change to the supplied Philips GoGear connector before use.  
1
2
3
Slide the dock switch located near the dock connector to  
Take the dock out.  
Correctly place the suitable dock in. Then firmly hold down the dock, and  
simultaneously push the dock switch back to position.  
.
wnload from Www.Somanuals.com. All Manuals Search And Downlo  
DOCK ADAPTERS  
Before plugging your player in the dock, snap the suitable dock adaptor into the  
dock to provide a snug fit for the player to be docked.  
Selecting the correct dock adaptor  
• For the iPod dock, 8 dock adaptors of different type, as indicated at the back of  
the adaptor, are included to fit the following iPod:  
20GB, 40GB, 20/30GB photo, 40/60GB photo, 30GB video, 60GB video, miniand  
nano.  
• For the Philips GoGear dock, 4 dock adaptors of different type are included.  
Each adaptor is marked a number from “1” to “4” at its back. These numbers  
indicate the fit Philips GoGear players as follows:  
“1” = HDD6320/6330  
“2” = HDD1420/1620/1630/1635/1820/1830/1835  
“3” = HDD1840/1850  
“4” = SA9100/SA9200  
PLAYING APPLE iPod/PHILIPS GoGear USING AJ300D  
1
2
Snap the compatible iPod/GoGear into the dock connector.  
Press DOCK to switch on the dock mode.  
Make sure that you have powered on Philips GoGear before selecting DOCK  
source.  
On the AJ300D’s display, “HDD” is displayed when GoGear player is  
connected, or “iPod” is displayed when iPod is connected.  
3
For iPod, the connected player will play automatically.  
For Philips GoGear, press 2; to start playback if the playback doesn’t start.  
Notes:  
In dock mode, if no player is docked for 15 minutes, AJ300D will come to standby.  
By using the buttons ( 2;, ¡1, 2and VOLUME ) on the AJ300D and its  
remote control, the following disc playback features are available: Play/Pause,  
selecting next/previous track, fast forwarding/rewinding (only available to Apple  
iPod) and changing volume.  
The buttons ( 2;, ¡1, 2and VOLUME ) on the AJ300D and its remote control  
can work only with playback of the audio contents stored on the docked player.  
CHARGING iPod/PHILIPS GoGear BATTERY USING THE DOCK  
Docking your iPod/Philips GoGear and connecting the dock to AJ300D, you can  
wnload from Www.Somanuals.com. All Manuals Search And Downlo  
charge the iPod/GoGear in the standby mode and power-on mode of AJ300D.  
SLEEP  
This set has a built-in sleep timer, which enables the radio to be automatically  
switched off after a set period of time. There are five sleep time options.  
Setting and switching off SLEEP  
1
Set your timer by pressing SLEEP repeatedly until the desired timer option appears.  
Selections are follows (time in minute):  
120=90=60=30=15=OFF=120  
The set will turn off automatically at the selected time.  
To cancel sleep, press either:  
2
3
POWER  
SLEEP once or more until SLEEP disappears from the display.  
Reset  
Should your set receive external interference e.g. static electricity from carpets, thun-  
derstorms, etc. RESET allows you to clear all previous settings and start up again.  
Use a ballpoint pen to press the RESET hole found on the bottom of the set.  
CONNECTING AN EXTERNAL DEVICE  
You can listen to the sound of the connected external device through your  
AJ300D’s speakers.  
1
2
Press TUNER/AUX twice to select AUX mode.  
Use the supplied AUX-IN cable to connect AJ300D’s AUX IN jack to an AUDIO  
OUT or headphone jack on an external equipment (such as CD player, or VCR).  
Notes:  
In AUX mode, if the AUX-IN cable is not connected for 15 minutes, AJ300D will  
come to standby.  
wnload from Www.Somanuals.com. All Manuals Search And Downlo  
MAINTENANCE & SAFETY  
Install the unit near the AC outlet and where the AC power plug can be easily  
reached.  
The apparatus shall not be exposed to dripping or splashing.  
Do not expose the set to humidity, rain, sand or excessive heat caused by  
heating equipment or direct sunlight.  
To clean your set, use a soft damp cloth or chamois leather. Do not use cleaning  
products, which contain benzene, thinner, etc. as these may harm the housing.  
SPECIFICATIONS  
Frequency response ................................................................80 Hz – 20 KHz  
Sound pressure level ...................................................................90 dB @ 1m  
wnload from Www.Somanuals.com. All Manuals Search And Downlo  
TROUBLESHOOTING  
If a fault occurs, first check the points listed below before taking the set for repair.  
If you are unable to remedy a problem by following these hints, consult your dealer or  
service centre.  
WARNING: Under no circumstances should you try to repair the set yourself, as this  
will invalidate the guarantee. Do not open the set as there is a risk of  
electric shock!  
No sound  
Volume not adjusted  
Adjust the volume  
The set is muted.  
Press”MUTE” on the remote control to active playback sound.  
Display error / no reaction to any controls  
Electrical malfunction  
Unplug the power cord, then re-plug.  
Intermittent crackling sound during FM reception  
Weak signal  
Extend and position the pigtail aerial  
The alarm does not function  
Alarm time/ mode not set  
See SETTING THE ALARM (Dock mode is for Apple iPod and Philips GoGear  
SA9100 and SA9200.)  
Volume too low for radio  
Increase the volume  
Dock operation  
The menu navigation or photo playback of the docked player cannot be car-  
ried out through the buttons on AJ300D or its remote control.  
The buttons on AJ300D and its remote control can control playback of audio con-  
tents only. To navigate the menu, use the controls on the docked player.  
Some buttons on AJ300D and its remote control have no function.  
The buttons ( 2;, ¡1, 2and VOLUME ) function only. For Philips GoGear, fast  
wnload from Www.Somanuals.com. All Manuals Search And Downlo  
forwarding/rewinding is not available.  
ENVIROMENTAL INFORMATION  
All unnecessary packaging material has been omitted. The packaging can  
be easily separated into three materials: cardboard, polystyrene and plas-  
tic.  
Your set consists of materials which can be recycled if disas-  
sembled by a specialized company. Please observe the local  
regulations regarding the disposal of packaging, dead batteries  
and old equipment.  
Disposal of your old product  
Your product is designed and manufactured with high quality materials  
and components, which can be recycled and reused.  
When this crossed-out wheeled bin symbol is attached to a  
product it means the product is covered by the European  
Directive 2002/96/EC.  
Please inform yourself about the local separate collection sys-  
tem for electrical and electronic products.  
Please act according to your local rules and do not dispose of your old  
products with your normal household waste. The correct disposal of your  
old product will help prevent potential negative consequences for the  
environment and human health.  
wnload from Www.Somanuals.com. All Manuals Search And Downlo  
Clock radio  
Meet Philips at the Internet  
English  
wnload from Www.Somanuals.com. All Manuals Search And Downlo  
Printed in China PDCC-JH-AZ-0645  
Notes for iPod connection  
1. The docking entertainment system is compatible with all the existing Apple iPod models with 30-pin  
connector.  
2. Four adaptors are included to fit different iPod models including iPod touch (8GB, 16GB), iPod  
classic (80GB, 160GB), iPod nano 3rd generation (4GB, 8GB), iPod the 5th generation (30GB, 60GB,  
80GB), iPod nano 2nd generation (2GB, 4GB, 8GB) and iPod nano 1st generation (1GB, 2GB, 4GB ).  
 

Pelco DVR C1570M E 4 07 User Manual
Philips Baby Monitor SCD609 User Manual
Philips Computer Monitor MWE1160T User Manual
Philips DVD Player DVD737 User Manual
Philips Mobility Aid SRU 4010 10 User Manual
Philips Portable Radio AE6565 User Manual
Pioneer Network Router BR SIT01 User Manual
Pioneer Stereo Amplifier GM 3100T User Manual
Polaris Offroad Vehicle 340 Touring User Manual
PYLE Audio DVD Player PLRD92 User Manual