Philips Home Theater System MCD288 12 User Manual

MCD 288  
Quick Start Guide  
What’s in the Box?  
You should find these items upon opening the box.  
Component video cables (red/  
Remote control with two AAA  
batteries  
A/V cord (R/W/Y)  
blue/green)  
Quick Start Guide  
1
15-pin D-Sub cable (with one  
External video box  
FM wire antenna  
Quick start guide  
end fixed on the main set)  
2
User Manual  
AC power cord  
Stand  
User manual  
 
Setting the clock  
IMPORTANT!  
To set clock in the Eco Power mode, press and hold STANDBY-ON/ECO POWER 2 on the set for  
3 seconds or more to switch to normal standby mode first before proceeding with the procedures  
below.  
1
In standby mode, press and hold CLOCK/RDS on the remote.  
2
When the hour digits flash, press VOLUME-/+ (VOL+/- on the remote) to set the hours.  
3
Press CLOCK/RDS again and the minute digits flash.Then press VOLUME-/+ (VOL+/-  
on the remote) to set the minutes.  
4
Press CLOCK/RDS again to confirm the time setting.  
Setting DVD menu options  
IMPORTANT!  
If the progressive scan feature is activated but the connectedTV does not support progressive  
signals or the cables are not connected accordingly, see the user manual for proper progressive  
scan setup or deactivate the progressive scan feature as below:  
1)Turn off yourTV progressive scan mode or turn on to interlaced mode.  
2) Press SYSTEM MENU on the remote to exit the system menu and then DISC to exit  
progressive scan.  
DIVX(R) VOD  
Tip  
See chapters "Preparations" and "System  
Menu Options" in the User Manual for  
detailed descriptions.  
 
Playing a disc  
1
Insert a disc into the slot loader.  
e
i
Pr  
Make sure the label side is facing you.  
Make sure you have removed any other disc from the slot loader.  
S
i
n
d
t
e
2
Playback will start automatically. If not pressÉÅ.  
3
To stop playback, press 9.  
Programming and tuning to radio stations  
1
Press SOURCE (TUNER on the remote) to select tuner source.  
2
Press PROGRAM for more than two seconds to program all available stations in order of waveband.  
3
Press PRESET ¡ / until the desired preset station is displayed.  
Playing a USB mass storage device  
With the Hi-Fi system, you can use USB flash memory (USB 2.0 or USB1.1),  
USB flash players (USB 2.0 or USB1.1), memory cards (requires an additional card reader to  
work with this Hi-Fi system).  
1
Insert the USB device’s USB plug into the socket  
on the set.  
2
IMPORTANT!  
Slide down to  
expose some  
Press SOURCE once or more to select USB (or USB/CARD on the remote control).  
buttons and jacks on  
the front panel!  
3
Play the USB’s audio files as you do with the albums/tracks on a CD,  
Tip  
Detailed playback features and additional functions are  
described in the accompany owner's manual.  
GB  
PDCC-JS/JW-0611  
 

Peerless Industries TV Mount HP450 User Manual
Pelco Paint Sprayer EH2200 User Manual
Philips Flat Panel Television 19HFL3232D User Manual
Philips Stereo Amplifier 5534A User Manual
Philips Stereo System 22PP1101 User Manual
Philips Surge Protector SPP1188WA User Manual
Pioneer Satellite Radio GEX AIRWARE1 User Manual
Pioneer Stereo System HTS 570 User Manual
ProForm Home Gym HGBE89911 User Manual
ProForm Home Gym PFEX39911 User Manual