Use this simple and quick way to watch your favorite
DVD movie and enjoy your Home Cinema experience!
Quick Use
Guide
Front Speaker (Right)
Center Speaker
Front Speaker (Left)
Rear of TV
AV IN
75 ⍀
AUDIO
OUT
o connect your LX3500 Home
TCinema Surround Receiver:
L
S-VIDEO
IN
R
SPEAKER CONNECTIONS
x5
1
AVIN
75
⍀
a. • Connect the Front Right (+,-) speaker wires to
AUDIO
OUT
L
R
the FR (Red +,-) speaker terminals on the Receiver.
• Connect the Front Left (+,-) speaker wires to the
FL (White +,-) speaker terminals.
1a
• Connect the Center speaker wires to the C (Green
+,-) speaker terminals.
HELPFUL HINTS
b. • Connect the Surround Right (rear speaker) wires to
the SR (Gray +,- ) speaker terminals.
Your TV capability determines which
type of video connection you can make
with the DVD Receiver.
• Connect the Surround Left (rear speaker) wires to
the SL (Blue +,- ) speaker terminals.
2
c. • Connect the Subwoofer speaker AUDIO INPUT
jack to the WOOFER LINE OUT jack on the receiv-
er. Use the supplied black cable with RCA connec-
tors on each end.
If your TV only has a single Antenna In
jack, you will need an accessory RF
75
COMPONENT
VIDEO OUT
PrCr
PbCb
Y
P-SCAN
FR
SR
AM
ANTENNA IN
Modulator
to view DVD playback on your
CENTER
LINE OUT
VIDEO
OUT
+
+
AUDIO OU
OFF ON
TV. The RF Modulator converts the video from
the Receiver so it can play through the TV’s
Antenna connector.
See your electronics retailer or contact Philips for
details on RF Modulator availability.
If you use an RF modulator, set the TV to channel
3 or 4. Set the RF modulator’s 3/4 switch to the
same channel.
S-VIDEO
OUT
AUDIO IN
DIGITAL OUT
-
-
x1
VIDEO CONNECTION
R
SPEAKER
4
AM/FM
ANTENNA
2
CLASS 1
LASER PRODUCT
WOOPER
LINE OUT
AUX
OPTICAL
COAXIAL
• Connect the yellow VIDEO OUT jack on the
Receiver to the matching VIDEO IN jack on the TV.
Rear Speaker
(Surround Right)
Rear Speaker
(Surround Left)
OPTIONAL TV Audio Connection
In order to listen to normal TV broadcast channels
through the Home Cinema Surround Receiver (if your
TV has AUDIO OUT jacks) you must make an audio
connection.
Back of RF Modulator
(example only)
1b
ANT IN
TO TV
AUDIO IN
VIDEO
IN
R
L
CH3 CH4
IMPORTANT! The Receiver will use all surround
sound speakers only if the TV broadcast is in a surround
sound format (Dolby Digital, DTS, Dolby Pro Logic). If
the broadcast is in stereo only, some of the surround
speakers will not be active.
1c
Antenna or Cable TV Signal
• Connect the red and white pair of audio cables from
the TV AUDIO IN (Left & Right) jacks on the
Receiver to the AUDIO OUT (Left & Right) jacks on
the TV.
To DVD Receiver
Connecting Speaker Cable
Note: You must turn on the
power switch on the front
of Subwoofer when in
operation.
S-VIDEO
IN
Pr/Cr
Pb/Cb
Y
If your TV has S-Video or
Component (PB PR Y) jacks
you can connect the receiver using
one of these for a higher quality connection. See
.0
4
7
(1
"
2
m
m
)
P
U
S
H
IN
NOTE: When listening to TV programs, the Receiver
must be set to the AUX mode for the sound to be heard.
Subwoofer
PUSH
DOWN
your instruction manual for details.
a
b
c
Flip the page to start DVD playback and arrange the surround speakers.
|