DVD Recorder /VCR
DVDR3430V
3 Enjoy
Start playback
Start recording
Quick Start Guide
From a disc
Record to DVD or VCR
A
A
A
A
Press DVD on the remote control.
Press DVD to record to a recordable DVD.
Or, press VCR to record to a VHS tape.
B
Press OPEN/CLOSE
, load a disc and close
B
the disc tray.
Load in a blank recordable DVD to the disc tray or a
VHS tape to the tape deck.
C
D
Press PLAY/PAUSE
to start playback.
.
C
Press SOURCE repeatedly to select the source to
record from (eg, TUNER, CAM1, DV, EXT1 or EXT2).
To stop playback, press STOP
z To record a TV programme, use P+/- on the
remote control to select a programme channel.
From a VHS tape
B
A
D
E
Press REC MODE repeatedly to select a desired
recording mode (refer to the Record Mode table).
Press VCR on the remote control.
B
Insert a pre-record VHS tape into the tape deck.
Press REC
to start recording.
Press REW
to rewind the tape if necessary to the
beginning of the recording.
Note To set the recording time, press
repeatedly to extend the recording time in 30-minute
increments. The recording will stop automatically at
the designated end time.
Connect
C
D
1
2
3
Press PLAY/PAUSE
to start playback.
To stop playback, press STOP
.
Set up
Enjoy
z If record from an external device, press PLAY on
the device to start playback.
F
To stop the recording, press STOP
.
Dubbing (DVD î VCR)
B
A
B
C
Press DVD to dub from DVD to VCR.
Or, press VCR to dub from VCR to DVD.
What’s in the box?
Get ready the appropriate disc and VHS tape in the
recorder.
Press DIRECT DUBBING
.
DVD
VCR
Rec. Mode
SP
OK
Cancel
OK
SOURCE
Remote Control
and 2 batteries
DVD Recorder /VCR
D
E
Select the desired recording mode, then move to
OK
in the menu and press
on the remote
PLAY/PAUSE
control to start dubbing.
To stop the dubbing, press STOP
.
User
Manual
Need help?
REC MODE
User Manual
See the user manual that came with your
Philips recorder.
RF Coaxial Cable
Online
2006 © Koninklijke Philips N.V.
All rights reserved.
12 NC 3139 245 22171
|