DVD 765K/751 English IFU
1
2002.3.20, 1:32 PM
” «
Contents
Introduction
KARAOKE
Environmental Information .....................................4
Supplied accessories ..............................................4
Safety Information ...................................................4
Symbols Used in this booklet ...............................4
General operation ...............................................15
General setup .......................................................15
Karaoke learning and language learning function
........................................................................................15
Functional overview
Setup menu
Front panel .................................................................5
Rear panel ..................................................................5
Remote control .......................................................6
Basic operation ..................................................16
General setup menu .......................................16
Disc lock .................................................................16
VFD DIM...................................................................16
Program ..................................................................16
OSD language .........................................................17
Screen saver ............................................................17
Speaker setup page .........................................17
DOWNMIX mode ................................................17
D.R.C .......................................................................17
Center speaker .......................................................18
Surround speaker ..................................................18
Subwoofer speaker ...............................................18
Center delay ...........................................................18
Surround delay ......................................................18
Bass Redirection .....................................................18
Test tone ................................................................19
Pro Logic setup ..................................................19
SPDIF setup ........................................................19
SPDIF OUT setup ..................................................19
LPCM 96K mode ...................................................19
Video Output setup ......................................20
Video output ...........................................................20
TV display ................................................................20
TV type ...................................................................20
Picture Source..........................................................21
Progressive Scan......................................................21
Brightness...................................................................21
Preferences setup .............................................21
Audio language .......................................................21
Subtitle language .....................................................21
Disc menu language ...............................................22
Password ..................................................................22
Parental control ......................................................22
Default setup...........................................................23
Smart Navigator ....................................................23
Preparation
Basic Connection ..................................................7
Connecting to a TV .............................................7
Connecting to Optional Equipment .....................8
Conecting to a Audio System ..............................8
Inserting batteries into the Remote Control ..9
Using the Remote control ...................................9
NTSC/PAL Conversion .........................................9
Switching On ..........................................................10
Operation
Basic Playback ....................................................10
General Operation ...........................................10
Video control during playback ............................10
Audio control during playback ............................11
Repeat .......................................................................11
Repeat A-B .............................................................11
5 disc Resume .........................................................11
OSD (On-Screen Display) ...........................12
Title Selection .........................................................12
Chapter Selection .................................................12
Time Search ............................................................12
Zoom ......................................................................12
Special DVD Features .....................................12
Playing a title .........................................................12
Playing a chapter ....................................................12
Camera Angle .........................................................12
Changing the audio language ...........................12
Subtitles ....................................................................12
SpecialVCD & SVCD Features ..................13
Playback Control (PBC) ...................................13
Preview function ...................................................13
Picture CD & MP3 CD Playback
Function introduction.............................................14
Basic playback .........................................................14
Auto playback .........................................................14
Selection playback ................................................14
JPEG picture & MP3 playback together..............14
Preview playback ...................................................14
Playback with multi-angles ...................................14
Playback Speed Control ........................................14
Zoom picture ..........................................................14
Specifications
Specifications ...........................................................24
Maintenance
Maintenance ........................................................ 24
Troubleshooting
Troubleshooting ....................................................25
3
DVD616K IFU fo2r0/0725.31.20, 1:33 PM3141 016 18911
DVD 765K/751 English IFU
3
” «
Introduction
room, moisture may condense on the lens of the
disc unit inside the DVD player. Should this occur,
the DVD player would not operate normally.
Leave the power on for about one hour with no
disc in the DVD player until normal playback is
possible.
Thank you for purchasing this Philips DVD player.
This Owner’s Manual explains the basic operation
of this DVD player.
Environmental Information
All unnecessary packaging has been omitted.We
have tried to make the packaging easy to separate
into three materials: cardboard (box), polystyrene
foam (buffer) and polyethylene (bags, protective
foam sheet).
● The mechanical parts of the set contain self-
lubricating bearings and must not be oiled or
lubricated.
● When the DVD player is switched to Standby
mode, it is still consuming some power. To
disconnect the system from the power supply
completely, remove the AC power plug from the
wall socket.
Your DVD player consists of materials which can
be recycled and reused if disassembled by a
specialized company. Please observe the local
regulations regarding the disposal of packaging
materials, exhausted batteries and old equipment.
Symbols Used in this Booklet
The below symbols appear in some headings and
notes with the following meanings:
Supplied accessories
– DVD-Video player
– Remote control with Batteries
– Audio cable
– Video cable
– Owner’s Manual
Safety Information
Helpful Hints!
●
Before operating the DVD player, check that the
operating voltage indicated on the typeplate is
identical with the voltage of your local power
supply. If not, please consult your dealer.
Place the DVD player on a flat, hard and stable
surface.
●
Some DVD video discs require specific
or allow only limited functions during
playback.
●
●
●
There must be sufficient room in front of the
player for the drawer to be opened.
In cabinet, allow about 2.5cm (1 inch) of free
space all around the player for adequate
ventilation.
●
●
Do not expose your player to extreme of
temperature or humidity.
If the DVD player is brought directly from a cold
to a warm location, or is placed in a very damp
4
DVD616K IFU for /751 3141 016 18911
2002.3.20, 1:33 PM
DVD 765K/751 English IFU
4
” «
Functional Overview
Front and Rear Panels
B; PLAY/PAUSE
– starts/interrupts playback
POWER ON/OFF
– switches the player On or Off
9 STOP
– stops playback
PROGRESSIVE SCAN
– switches the interlaced scan or
progressive scan.
T NEXT
– goes to the next title/chapter/track
S PREV
– goes to the previous title/chapter/track
DISPLAY
– shows the current status of the player
/ OPEN/CLOSE
– opens/closes the disc tray
Disc Tray
LEVEL 1/2
– MIC volume control 1/2 for karaoke
MIC 1/2
– MIC socket 1/2 for karaoke
Mains Cord
– connect to power outlet
AUDIO OUT (Multi-Channel)
– connect to an amplifier or
receiver with multi-channel inputs
Video out (Y PB PR)
– connect to a TV with component video
inputs
AUDIO OUT (Left/Right)
– connect to AUDIO inputs of an
amplifier, receiver or stereo system
Video out (CVBS)
– connect to a TV with CVBS inputs
Video out (S-Video)
– connect to a TV with S-Video inputs
Optical & Coaxial output
– connect to a receiver with optical & coaxial inputs
Caution:Do not touch the inner pins of the jacks on the rear panel. Electrostatic
discharge may cause permanent damage to the unit.
5
DVD616K IFU fo2r0/0725.31.20, 1:33 PM3141 016 18911
DVD 765K/751 English IFU
5
” «
Functional Overview
Remote Control
RETURN / TITLE
– go back to previous menu /
show title menu
POWER B
– switches DVD ON or to
standby-on mode
DISC MENU
– access menu of a DVD disc
/switch PBC on/off for VCD disc
0-9 numerical key pad
– select numbered items in a
menu
1 2 3 4
– select an item in the menu/
fast forward/backward, slow
forward/backward
DISPLAY
– display information on TV
screen during playback
ꢀ
ꢀ
SYSTEM MENU
– access or remove player’s
system menu
OK
– acknowledge menu selection
S
– go to a previous chapter or
track
T
– go to next chapter or track
SUBTITLE
STOP ( 9 )
– subtitle language selector
/switch off subtitle
– stops playback
PLAY ( B )
ANGLE
– starts playback
– select DVD camera angle
PAUSE ( ; )
– pause playback temporarily /
frame-by-frame playback
ZOOM
– enlarge video image
AUDIO
REPEAT
– audio language selector
– repeat chapter, track, title, disc
KARAOKE
– display Karaoke menu to set
MIC on or off
REPEAT (A-B)
– repeat a specific segment
PREVIEW
– Preview the content of a track
or whole disc
KEY
– display Karaoke menu to set
key control
VOCAL
MUTE
– choose audio channels or
karaoke methods
MODE
– Disable or enable sound output
– display karaoke menu
Note:
Press digit “1” for about 2 seconds to
OPEN or CLOSE disc tray.
6
DVD616K IFU for /751 3141 016 18911
2002.3.20, 1:33 PM
DVD 765K/751 English IFU
6
” «
Preparation
● Make one of the following connections,
Basic Connections
depending on the capabilities of your existing
equipment.
●
Please refer to the instruction books of yourTV,
VCR, Stereo System or other devices as
necessary to make the best connections.
The following guidelines are options for the best
picture and sound quality available on your DVD
player.
Caution: Component video and S-video
can not work at the same time, so you
have to set one of them to be active by the
such way as shown on the chapter [Video
output].
Connecting to aTV
If yourTV has a CVBSVideo input
connector,
0
0
Connect the CVBS VIDEO OUT on the DVD
player to the CVBS VIDEO IN (cable supplied).
Warning!
If yourTV has a S-Video input connector,
Connect the S-Video OUT on the DVD player to
the S-Video IN (not supplied).
– Never make or change connections with
the power switched on.
– Connect the DVD player directly to your
TV, instead of eg.aVCR, to avoid
distortion because DVD video discs are
copy protected.
If yourTV has a Component video
(Y/PB/PR)input connector,
Connect theY/PB/PR VIDEO OUT on the DVD
player to the corresponding connector on theTV
using the component video cable (not supplied).
0
– Do not connect the DVD player AUDIO
OUT to PHONO IN of your player.
7
DVD616K IFU fo2r0/0725.31.20, 1:33 PM3141 016 18911
DVD 765K/751 English IFU
7
” «
Preparation
Sound
Connecting to a Audio System
1 Digital audio connections provide the clearest
sound. Connect one of the DVD player’s
DIGITAL AUDIO OUT (COAXIAL or
OPTICAL) to your amplifier or receiver.
2 If digital connections are not possible, connect
the DVD player’s red and white AUDIO OUT to
your amplifier, receiver, stereo orTV.
1 You can also listen to the sound of audio CDs
and DVD video discs by connecting to an
optional stereo systems.
2 Connect the Left and Right AUDIO OUT on the
DVD player to the Left and Right AUDIO IN on
the stereo systems.
Analog connection to a multi-channelA/V
receiver with 6 channels audio in
connectors
Connecting to Optional
Equipment
● A multi-channel decoder enables playback of
DVDs recorded in multi-channel surround
without the need of optional decoder. Connect
the audio out jacks to the corresponding jacks of
your A/V receiver with six cables. In the SPEAKER
SETUP menu, select DOWNMIX to OFF and
enable the 6CH decode function by the method
introduced on the chapter [ Setup Menu ].
Notes:
●
A digital component with a built-in MPEG 2,
Dolby Digital™ or DTS decoder allows you to
enjoy the surround sound while producing the
effect of being in a movie theater or a concert
hall.
If your receiver has a Dolby Digital™,
MPEG 2 or DTS decoder,
Connect to A/V receiver with digital
coaxial or optical cable
Connect the DIGITAL COAXIAL AUDIO OUT
of the DVD player to the corresponding input on
the receiver using the normal audio or video
cable supplied.
–
If the audio format of the digital output does
●
not match the capabilities of your receiver,the
receiver will produce a strong, distorted sound or no
sound at all.
8
DVD616K IFU for /751 3141 016 18911
2002.3.20, 1:33 PM
DVD 765K/751 English IFU
8
” «
Preparation
Notes:
AUTO can only be selected when using aTV
that has both the NTSC and PAL systems.
Slight picture distortions may occur due to this
conversion.This is normal.Thus, theAUTO format is
most suitable for the best picture quality.
Inserting batteries into the
Remote Control
–
–
1
2
Open the battery cover.
Insert batteries with the correct polarity as
indicated by the + and - symbols inside the
battery compartment.
3
Close the cover.
-
+
+
-
CAUTION!
–
Remove batteries if they are exhausted
or not to be used for a long time.
Do not use old and new or different
types of batteries in combination.
Batteries contain chemical substances,
–
–
so they should be disposed off properly and
kept away from children.
Using the Remote Control
●
Direct the remote control at the remote sensor
of the DVD player.
●
●
Do not drop or give the remote control a shock.
Do not leave the remote control near extremely
hot or humid place.
●
Do not spill water or put anything wet on the
remote control.
NTSC/PAL Conversion
This player is equipped with a NTSC/PAL
conversion feature to convert the video output
of the disc to match yourTV system.The
conversions supported are as below:
Disc
Output format
Selected mode
Type
Format
NTSC
PAL
AUTO
NTSC
PAL
NTSC
PAL
NTSC
DVD
VCD
PAL
PAL
PAL
PAL
NTSC
NTSC
NTSC
NTSC
PAL
NTSC
PAL
9
DVD616K IFU fo2r0/0725.31.20, 1:33 PM3141 016 18911
DVD 765K/751 English IFU
9
” «
Operation
Preparation
Basic Playback
Switching On
1 Press POWER ON/OFF on the front panel.
2 Press OPEN/CLOSE on the front panel to open
disc loading tray.
3 Place the chosen disc in the tray, with the label
facing up.
4 Press OPEN/CLOSE again to close the tray.
➜ After recognizing this disc the player begin to
playback automatically.
1
2
Switch on theTV and DVD player.
Set theTV to the correctVideo IN channel. (eg.
EXT1, EXT2,AV1, AV2, AUDIO/VIDEO, etc.
Please refer to to yourTV owner’s manual for
detail)
➜The player display lights and the default screen
appears on theTV.
If you are using an external equipment (eg. audio
system or receiver), turn them on and select the
appropriate input source that was used to
connect to the DVD player output. Refer to the
equipment owner’s manual for detail.
3
Note:
IfTV set has Progressive Scan video input, please
connect the component video cables between
DVD player andTV set. for best video
performance, then
Press PROGRESSIVE SCAN on the front panel
to select progressive scan mode.
Notes:
–
DVDs may have a region code.Your player will
not play discs that have a region code different
from the region code of your player.
0
–
If ‘Disc Lock’ is set to ON and the disc inserted
0 The DVD player will reboot, when you switch
between progressive scan and interlaced scan by
pressing PROGRESSIVE SCAN key on the front
panel.
is not authorized, the 4-digit code must be entered
and/or the disc must be authorized (see ‘Disc
Lock’).
General operation
Video control during playback
DVD VCD
CD
STOP
1 You can resume the play from the point at which
you stopped last time, if you just press the STOP
key once. It will start from the beginning if you
press the STOP key twice to stop playback.
DVD VCD
CD
PAUSE/STEP
1 To get a still picture, press PAUSE key during
playback.
2 To step forward to the next frame picture, press
PAUSE key again.
3 To resume normal playback, press PLAY.
DVD VCD
CD
SEARCH
1 To search the contents in fast speed, press the 2
or 1for fast forward/backward searching.
2 Press the 1or 2again to increase the speed for
searching.
3 Press PLAY to return to the normal playback.
10
DVD616K IFU for /751 3141 016 18911
2002.3.20, 1:33 PM
DVD 765K/751 English IFU
10
” «
Operation
Slow Motion
Repeat
DVD
DVD
1
To get slow motion effect during playback, press
3 or 4.
Repeat chapter/title/disc
● To repeat the current chapter, press REPEAT.
● To repeat the current title, press REPEAT a
second time.
2 Press 3 or 4again, you can get different playback
forward/backward speeds.
3 Press PLAY to return to the normal play back.
● To exit Repeat mode, press REPEAT again.
VCD
VCD
CD
Repeat track/disc
1
To get slow motion effect during playback, press
3.
● To repeat the current track, press REPEAT.
● To repeat the entire disc, press REPEAT a second
time.
2 Press 3again, you can get different playback
forward speeds.
3 Press the PLAY key to return to the normal play
● To exit Repeat mode, press REPEAT again.
back.
NOTE:
DVD
VCD
CD
Repeat A-B
-The SLOW BACKWARD function is not available
for the SuperVCD/VCD/CD disc.
DVD-Video Discs: repeat a sequence in a
title
Video and Audio CDs: repeat a sequence in a
track
1 Press REPEAT A-B at your chosen starting point.
2 Press REPEAT A-B again at your chosen end
point.
Audio control during playback
DVD VCD
CD
MUTE
1 Press the MUTE key to disable the sound output.
2 Press the MUTE key again to remove the mute.
➜The repeat sequence begins.
3 To exit the sequence, press REPEAT A-B.
SURROUND SOUND
DVD VCD
CD
5 Disc Resume
The DVD player can reproduce virtual surround
sound effect.
1 Press the Display key on the remote control.
2 Press 1 2 to highlight option 3D
3 Press 3 4 to switch it on or off.
DVD
VCD
CD
This player can resume the playback of last 5
discs, which should be unload at stop mode.
1 Load one disc, which is one of last 5 discs.
2 Press PLAY when DVD player is recognizing the
disc. if the information of this disc has been stored
in the memory of DVD player, it will be played
back from the point you stopped last time.
NOTE: Before select the surround sound effect,
you must set DOWNMIX at the mode of
STEREO, LT/RT or VSS( please refer to SPEAKER
SETUP PAGE in SETUP MENU).
Audio channel selection
VCD
CD
1 SVCD has two stereo audio channels which are
used for playing karaoke or the audio language
selection. ( for instance, you can choose one
channel for only the music background of the
song while you play the karaoke.)
2 Press the AUDIO key on the remote control to
select the audio channels you want.
3 VCD has only one stereo audio channel, you can
select mono left audio channel or mono right
audio channel by pressing the AUDIO key on the
remote control.
11
DVD616K IFU fo2r0/0725.31.20, 1:33 PM3141 016 18911
DVD 765K/751 English IFU
11
” «
Operation
OSD (On-Screen Display)
DVD VCD
Special DVD Features
DVD
Playing a title
This function will provide some information
about your playing disc on the screen.
Press DISPLAY key on the remote control.
A DVD disc may have one or more titles.This
depends on the content (a movie, video clips, a
drama series, etc) on the disc.
0
0 After you load a disc, information about the
content shows on the screen waiting for your
selection. Likewise, you can press the TITLE key
on the remote control to turn back to the title
menu during playback.
Title Selection
1 Press 1 2 to highlight optionTitle number.
2 Press 3 4 to change the title number.
➜ DVD player will playback selected title.
Chapter Selection
➜ Press the appropriate numerical key or 341
2 keys on the remote control to highlight your
selection.
1 Press 1 2 to highlight option chapter number.
2 Press 3 4 to change the chapter number.
➜ Press OK key, DVD player will playback
selected chapter.
➜ Press the OK key to confirm it.
DVD
Playing a chapter
Time Search
While you have selected a title, it may include
one or more chapters.
0
Press 1 2 to highlight time display area.
For DVD discs:
0 Any time you want to watch another chapter
during playback, press DISC MENU key to turn
back to the chapter menu(If disc has chapter
menu).
➜ CC means the time has been played back of
current chapter. CR means the time is remainder
of current chapter.TC means the time has been
played back of current titile.TR means the time is
remainder of current title.
➜ Press the appropriate numerical key or 341
2 keys on the remote control to highlight your
selection.
➜ Press the OK key to confirm it.
➜ After a chapter has been selected, you also can
press the ¡1 or 2™ key to make a change.
For SuperVCD orVCD disc
➜ DC means the time has been played back of
the disc. DR means the time is remainder of the
disc.TC means the time has been played back of
current track.TR means the time is remainder of
current track.
Press the 1 2 keys to highlight the itemTIME and
you can play from any point of the disc.
➜ Enter hours, minutes and seconds from left to
right in the time edit box using remote control
numerical key pad.( e.g. 0:34:27)
DVD
Camera Angle
0
Some discs contain scenes which have been shot
simultaneously from various angles.
This DVD player allows you to select the desired
camera angle.
➜ Press the OK key to confirm it.
➜To aVCD disc, the selected point must be
within the current track.
0
pressing the ANGLE key on your remote control.
NOTE: The function is available for the DVD discs
which have recorded several angles movie.
DVD
Zoom
VCD
DVD
Changing the audio language
0 Press AUDIO repeatedly to select the different
languages.
The Zoom function allows you to enlarge the
video image.
1 Press the ZOOM key to activate the function.
➜ Use the 341 2 key to view the rest part of
the zoomed picture.
➜ Playback will continue.
2 Press the ZOOM key again to return to the
original size.
NOTE: The function is activated, only if the DVD is
recorded with multi-languages audio tracks.
DVD
Subtitles
0 Press SUBTITLE repeatedly to select the
different subtitles.
0 Press SUBTITLE for about 2 seconds to switch
subtitle on or off.
NOTE: -This function is NOT available for PAL
DVD discs or some DVD discs.
-This function is invalid in the Progressive Scan
video output mode.
NOTE: The function is activated, only if the DVD or
SuperVCD is recorded with multi-subtitles.
12
DVD616K IFU for /751 3141 016 18911
2002.3.20, 1:33 PM
DVD 765K/751 English IFU
12
” «
Operation
VCD
SpecialVCD & SVCD Features
Preview function
Playback Control (PBC)
PBC function can make you enter the index
menu which is used to select a track after loading
the SVCD orVCD disc.
At STOP mode, press the PREVIEW key to enter
previewing menu.
+ shown as the left
If you want to activate the function,
1 press the DISC MENU key on the remote control
to set the PBC On.
➜ Pay attention to the hint on the screen.
2 Use the ¡1 or 2™ key to select the page you
like.
1
Disc introduction
Select this function, DVD player will play back
every track several seconds with full screen, that
makes you understand the content of disc.
- Press the numerical key 1.
➜ If the items of the index menus are numbered,
press the appropriate numerical key on the
remote control.
- Press OK key to confirm it.
- Press STOP key to quit previewing.
2
Disc preview
➜ press the OK key to confirm.
This function will minify the picture of one track
enough to display every nine of these tracks on
the full screen which will help you to preview a
disc.
3 Press the RETURN key to enter the index menu
during the play back.
NOTE:
ꢀThe content of the index menu depends on the
disc. Please refer to the disc’s instruction for detail.
ꢀIf the disc doesn't include the PBC information,
this function will have no effect.
If you want to skip the index menu and
playback directly from the beginning,
1 press the DSIC MENU key on the remote control
to switch off the function.
- Press the numerical key 2.
- Press OK key to confirm it.
- Select the other tracks beyond this page by
pressing the ¡1 or 2™ key.
- Press the numerical keys to choose the desired
track.
➜ For the karaoke discs, even if PBC function is
off, you still can use the ¡1 or 2™ key to select
the track you like.
- Press the OK key to confirm it.
3
Track preview
This function is used to divided a single track into
nine parts and display them on the full screen
which will help you to preview the selected track.
- Press the numerical key 3.
- Press the OK key to confirm it.
- Preview other tracks, press the ¡1 or 2™ key.
- Press numerical key to choose the start point.
- Press the OK key to playback the start point.
4
Quit preview function
- Press the numberical key 4.
- Press the OK key to exit.
13
DVD616K IFU fo2r0/0725.31.20, 1:33 PM3141 016 18911
DVD 765K/751 English IFU
13
” «
Picture CD & MP3 CD Playback
2
In the JPEG playback menu, press the 1 2 3 4
key to select the folder you want and press the
OK to open it.
Press the 1 2 3 4key to highlight your
favourite file and press the OK key to confirm.
Function introduction
This player can playback JPEG format pictures and
MP3 files and especially can be compatible with
Kodak Photo CD.
3
Picture CD is a disc with the collection of JPEG
format pictures, as customers prefer, and all
extension filename should be ended with 'JPG'.
The CD can be burned on every computer, and
pictures maybe from digital camera or scanner. If
the customers prefer, they may make this CD
become a DigitalAlbum.
JPEG picture & MP3 playback
together
Select the WITH MENU item at the SMART
NAV menu.
Select a MP3 music under the operation of [
Selection playback ].
Press the REPEAT A-B key.
➜ “MUSIC SLIDE SHOW MODE” displays on
TV screen.
Press the REPEAT A-B key again.
➜ “MP3 IS SELECTED”displays onTV screen.
Open a folder with JPEG pictures under the
instruction of [ Selection playback ].
Highlight a picture and press PLAY or OK key.
➜ MP3 and JPEG pictures will playback together.
➜ The JPEG pictures in the current folder will
playback in sequence, untill the last picture in the
folder is played back.
NOTE: If the MP3 music has been played back
over ahead of JPEG pictures,the music will be
played back repeatly till the pictures are playback
over. Otherwise, the MP3 music will be cutoff
automaticly along with the JPEG pictures over.
1
2
For playing this Digital Album (picture CD)
conveniently, our DVD player can
Playback pictures one by one automatically.
Display the picture customer preferred.
Zoom the picture.
Rotate the picture.
Flip the picture vertically or horizontally.
Control the playback speed.
0
0
0
0
0
0
3
4
0 Album and track selection.
0
0
0
0
Repeat (disc / album / track / picture).
Nested directory levels supported to 8 levels.
Maximum album numbers possible is 32.
Maximum MP3 Tracks Programmable is 96.
Basic playback
1
2
At the state of“NO DISC”, press the SYSTEM
MENU key to open the setup menu.
Press the 3 4key to highlight the PREFERENCE
item.
Preview function
1
Press the PREVIEW key at the STOP mode.You
will see nine pieces of minified pictures on the
screen.
3
4
Press OK to open the PREFERENCE menu.
Press the 3 4to highlight the SMART NAV
menu.
2
3
Press the 2™ or ¡1 key to display the next or
the previous nine-picture-preview.
Press the 1 2 3 4key to highlight one of them
and press the OK to display.
5
6
7
Press OK to open the menu.
Press the 2key to enter the menu.
Press the 3 4key to highlight the NO MENU
or WITH MENU item.
➜ NO MENU: playback all images in sequence
automatically, and MP3 musics will be played prior
to pictures.
➜WITH MENU:playback images in the selected
folder.
Playback with multi-angles
When displaying one picture onTV screen
Press the 3 4 1 key to get different effects.
3key: Flip the picture vertically.
4key: Flip the picture horizontally.
1key: rotate the picture anti-clockwise.
0
8
Press the OK key to confirm your selection.
The special function during playback:
Auto playback
After you open one picture, the player can
playback each file in sequence automatically.
Playback Speed Control
0
Press the 2key to adjust the playing back speed.
Zoom picture
0
0
Press the ZOOM key to display the picture with
different scales.
Press the 1 2 3 4 key to view the rest of the
zoomed picture.
Selection playback
Press the numerical key to select your favourite
file directly.
1
14
DVD616K IFU for /751 3141 016 18911
2002.3.20, 1:33 PM
DVD 765K/751 English IFU
14
” «
KARAOKE
Note:
General setup
If you want to switch MP3 musics or pictures
during automatical playback,please press the valid
number as showed on theTV screen after the DVD
player indexed the MP3 musics and pictures
included in the loaded disc.
Press MODE to display karaoke
menu (Karaoke menu will
disappear if you do not press any
key in a minute.
KEY CONTROL
1
2
Press 1 2 to highlight the option KEY.
Press 3 4to adjust the pitch to adopt your
voice.
General operation
SMART
DVD765K DVD VIDEO PLAYER
PICTURE
STANDBY-ON
MIC
1
MIC
2
LEVEL
1
LEVEL
2
Volume
1
2
Press 1 2 to highlight the optionVOLUME.
Press 3 4to adjust theVOLUME to adopt your
voice.
1 Connect microphone to MIC1 or MIC2 or to
both sockets. Be sure the player has been
properly connected to yourTV or audio system.
2 Press KARAOKE on the remote control to
display karaoke menu.
ECHO
1
2
Press 1 2 to highlight the option ECHO.
Press 3 4to adjust the echo level.
➜ karaoke menu appears onTV screen, and the
option ‘MIC’ is highlighted.
0
Press 3 4to switch on karaoke function.
Audio channels option
With this function, you can choose audio channels
during karaoke is available.
PressVOCAL on the remote control to choose
STEREO, LEFT VOCAL, RIGHT VOCAL, MONO
RIGHT or MONO LEFT .
3 Load a karaoke disc and press PLAY to playback.
4 Turn on the microphone which is connected with
the DVD player and you can enjoy the Karaoke
immediatly.
1
➜ LEFTVOCAL or RIGHTVOCAL options can
fade out the original vocal.
Karaoke learning and language
VCD
learning function
➜ To adjust the volume of microphone, turn the
knob LEVEL1 or LEVEL2 on the right of front
panel.
1
Press MODE to display karaoke menu.
➜ Make sure you have set MIC on.
Press 1 2to highlight RECORD OFF.
Press 3 to set RECORD on.
Press 3 again to start recording from the point
you perfer.
2
3
4
5 If you want to finish karaoke, press KARAOKE on
the remote control to display karaoke menu.
➜ karaoke menu appears onTV screen, and the
option ‘MIC’ is highlighted.
➜ DVD player will record your voice and
original karaoke music.
Press 3 again to end recording.
➜ DVD player will playback the recording three
times in total to let you make a comparasion.
Follow the instruction of step4 to step5 to
record other sequence.
0
Press 3 4to switch off karaoke function.
NOTE: Please set the option DOWNMIX to LT/RT,
VSS or STEREO before switching on Karaoke
function.
5
6
7 As soon as you finish recording, press 4 to quit
Karaoke learning and language learning function.
Note:Keeping highlight cursor on RECORD option
will allow you to record by pressing 3 , and 4 to
quit. Quit karaoke menu and 3 or 4 will get slow
motion effect.
15
DVD616K IFU fo2r0/0725.31.20, 1:33 PM3141 016 18911
DVD 765K/751 English IFU
15
” «
Setup Menu
Program (not available for DVD discs)
1 To choose the PROGRAM item, press the 34
keys.
Basic operations
1
Press SYSTEM MENU in the
STOP mode to enter the Setup
Menu.
2
Press OK to open its submenu.
3 Press the 2 key to move the cursor to the field of
the submenu to choose the item ON.
➜ ON:Enter the PROGRAM
item.
2
3
Press the OK key to open the
next level submenu or confirm your selection.
Press the 1 2 keys to enter the submenu or
return to the previous menu.
4
Press OK to enter the program page.
4 Press the 34 keys to highlight the desired
menu.
Input your favorite track
Input valid track number by pressing the
numerical keys.
Press the 1 234 keys to move the cursor to the
next selected position.
5
Press SYSTEM MENU to quit the setup menu.
➜ When you quit the setup menu, the settings
will be stored in the player’s memory even if the
player is switched to power off.
1
2
3 Repeat the steps above to input another track
General setup menu
number until the whole program is completed.
Some settings are needed in this menu. they are:
DISC LOCK, PROGRAM, OSD LANGUAGE
and SCREEN SAVER.
Exclude a track
1
2
Press the 1 234 keys to move
the cursor to track you want to
exclude.
Input an invalid track number to
cancel this track.
Follow the steps below:
1 Press the SYSTEM MENU key to enter the
setup menu.
2 Press the 34 keys to choose the GENERAL
SETUP menu.
Cancel all tracks
3 Press the OK key to confirm selection.
1
2
Press the 1 234 keys to move the cursor to the
CLEAR button.
Press OK, all tracks will be cancelled.
Disc lock
When the disc is locked, the player will store its
typical code into the memory for the future
identification. For the next playback, the DVD
player will prompt to enter the password.
1 Press the 34 keys to highlight the DISC LOCK
item in the GENERAL SETUP menu.
2 Press the OK key.
3 Now you can input your favorite tracks again.
Playback tracks
When programing is completed,
Press the 1 234 keys to move the cursor to the
PROG button.
Press OK.
1
2
➜ DVD player will playback the selected
program under the programed sequence.
3 Enter its submenu by pressing
the 2 key.
- LOCK: Lock the disc being played.
- UNLOCK: unlock the disc.
4 Press the 1 key to return to the GENERAL
SETUP menu.
Stop the program playback
At the PROGRAM page,When programing is
completed,
Press the 1 234 keys to move the cursor to the
QUIT button.
1
2
NOTE:
Press the OK key to quit this menu.
1. When playback a locked disc, the DVD player
will prompt to enter your password or 3308
(default) password.
2. To change the password , refer to the option
PASSWORD in the PREFERENCE menu .
VFD Dim
This function is used to adjust the brightness of
VFD on the front panel.
Press the 34 keys to highlight VFD DIM in the
GENERAL SETUP menu.
1
2
3
Press OK.
Enter its submenu by pressing the 2 key.
16
DVD616K IFU for /751 3141 016 18911
2002.3.20, 1:33 PM
DVD 765K/751 English IFU
16
” «
Setup Menu
REDIR, which gives the setup
system to reproduce
4
Move the cursor by pressing the 34 keys to
highlight the selected item.
high quality surround sound.
Press SYSTEM MENU.
Press the 34 keys to highlight the SPEAKER
SETUP item.
➜ 100: make theVFD brighter than normal.
➜ 70: standard brightness
➜ 40: make theVFD dimness.
1
2
3
Press OK to confirm.
5
6
Press OK to confirm.
Press the 1 key to return to the GENERAL
SETUP menu.
DOWNMIX mode
Press the 34 keys to highlight
the DOWNMIX item.
Press OK to open its submenu.
Enter its submenu by pressing the 2 key.
Move the cursor by pressing the 34 keys to
highlight the selected item.
1
OSD language
There are two languages available for information
displayed onTV screen.
Press the 34 keys to highlight OSD LANG in
the GENERAL SETUP menu.
Press the OK key.
Enter its submenu by pressing
the 2 key.
Move the cursor by pressing the 34 keys to
highlight the selected item.
➜ ENGLISH: OSD information will be displayed
in English.
➜ CHINESE: OSD information will be displayed
in Chinese.
Press the OK key to confirm.
Press the 1 key to return to the GENERAL
SETUP menu.
2
3
4
1
2
3
0
LT/RT
➜ This item will be used only if your DVD player
is connected with Dolby Prologic decoder.
Meanwhile, the DVD player can output Dolby
Prologic signals.
4
0
STEREO
➜ This item will help to downmix the signal of
Dolby Digital and DTS into stereo signals directly
outputing from L/R port.
5
6
0 VSS
➜ This function is to make DVD player
reproduce virtual surround sound effects.
OFF
0
Screen saver
This function is used to turn on or off the screen
saver.
Press the 34 keys to highlight SCR SAVER in the
GENERAL SETUP menu.
Press OK.
➜ Disable the DOWNMIX mode so that you
can setup your speaker system.
Press OK.
Press the 1 key and return to the SPEAKER
SETUP menu.
5
6
1
2
3
Enter its submenu by pressing
the 2 key.
Move the cursor by pressing the 34 keys to
highlight the selected item.
➜ ON: At STOP mode, if nothing is happened
within 5~6 minutes, screen saver will turn on .
➜ OFF: Screen saver is disable.
Press OK to confirm.
Press the 1 key to return to the GENERAL
SETUP menu.
D.R.C. (Dynamic Range
Compression)
DVD player will compress dynamic range of
sound effect output, when you do
not want to disturb your neighbours and your
famliy in midnight.
Press the 34 keys to highlight D.R.C.,
Press OK to open its submenu.
Enter its submenu by pressing the 2 key.
Move the cursor by pressing the 34 keys to
highlight the selected item.
4
1
2
3
4
5
6
Speaker setup page
This menu contains setup options of your speaker
system, such as DOWNMIX,
D.R.C.(Dynamic Range Compression), CENTER,
REAR, SUBWOOFER, CENTER
➜ ON: Enable D.R.C.
➜ OFF:Disable D.R.C.
Press OK.
Press the 1 key to return to the
SPEAKER SETUP menu.
5
6
DELAY, REAR DELAY ,TEST TONE and BASS
17
DVD616K IFU fo2r0/0725.31.20, 1:33 PM3141 016 18911
DVD 765K/751 English IFU
17
” «
Setup Menu
4
Move the cursor by pressing the 34 keys to
highlight the selected item.
➜ ON: Enable signal output for subwoofer
speaker.
Center speaker
This function is effective only when DOWNMIX
is OFF.When you are using a center speaker, set
to CENTER on in the menu.
➜ OFF: Disable signal output for subwoofer
speaker.
1
Press the 34 keys to highlight
the CENTER item.
5
6
Press OK.
2
3
4
Press OK to open its submenu.
Enter its submenu by pressing the 2 key.
Move the cursor by pressing the 34 keys to
highlight the selected item.
Press the 1 key to return to the SPEAKER
SETUP menu.
➜ ON:Enable signal output for center speaker.
➜ OFF: Disable signal output for center speaker.
Press OK.
Press the 1 key and return to the SPEAKER
SETUP menu.
Center delay
Set CENTER to on in the setup menu to delay
the sound reproduction from the
center speaker.
5
6
1
Press the 34 keys to highlight
the CNTR DELAY item.
2
3
Press OK to open its submenu.
Enter its submenu by pressing the
2 key.
Move the cursor by pressing the 34 keys to
highlight the selected item.
Press OK.
Surround speaker
This function is effective only when DOWNMIX
is OFF.When you are using rear surround speaker,
set REAR on in the menu.
4
1
Press the 34 keys to highlight
the REAR item.
Press OK to open its submenu.
Enter its submenu by pressing
the 2 key.
5
6
Press the 1 key and return to the SPEAKER
SETUP menu.
2
3
4
Move the cursor by pressing the 34 keys to
highlight the selected item.
➜ ON: Enable signal output for surround speaker.
➜ OFF: Disable signal output for surround
speaker.
Surround delay
Set REAR on then you can setup this option to
delay the sound reproduction from the
surround speakers.
1
Press the 34 keys to highlight
the REAR DELAY item.
Press OK to open its submenu.
Enter its submenu by pressing the
2 key.
5
6
Press OK.
Press the 1 key to return to the SPEAKER
SETUP menu.
2
3
4
Move the cursor by pressing the
34 keys to highlight the requisite item.
Press OK.
Press the 1 key and return to the SPEAKER
SETUP menu.
Subwoofer speaker
This function is effective only when DOWNMIX
is OFF.When you are using a
subwoofer speaker, set SUBWOOFER on in the
menu.
5
6
1
Press the 34 keys to highlight
the SUBWOOFER item.
Bass Redirection
2
3
Press OK to open its submenu.
Enter its submenu by pressing
the 2 key.
This option can reproduce bass effect from front
speakers and center speaker by transferring bass
signals to them instead of subwoofer.
Press the 34 keys to highlight the item BASS
REDIR.
1
2
3
4
Press OK to open its submenu.
Enter its submenu by pressing 2.
Pressing 34 to highlight the requisite item.
- ON: eable bass signal redirection.
- OFF: disable bass signal redirection.
Press OK.
5
18
DVD616K IFU for /751 3141 016 18911
2002.3.20, 1:33 PM
DVD 765K/751 English IFU
18
” «
Setup Menu
Test tone
SPDIF setup
This item is used to check the connection of the
audio system.WhenTESTTONE is ON, a fizzy
sound from every speakers will appear.
Press the 34 keys to highlight theTESTTONE
item.
In this menu, you can set up digital audio format
outputing from coaxial and optical terminals.
Press SYSTEM MENU to enter the SETUP menu.
Press the 34 keys to choose the SPDIF SETUP
menu.
1
2
1
2
3
Press OK to open its submenu.
Enter its submenu by pressing
the 2 key.
Move the cursor by pressing
the 34 keys to highlight the
selected item.
3
Press OK.
NOTE:
4
SPDIF is the abbreviation of Sony Philips Digital
Interface which is a protocol of digital data
transfering.
➜ ON: Enable test tone.
➜ OFF: Disable test tone.
Press OK.
Press the 1 key and return to the SPEAKER
SETUP menu.
SPDIF OUT setup
Press the 34 keys to highlight the SPDIF OUT
item.
Press OK to open its submenu.
Enter its submenu by pressing the 2 key.
Press the 34 keys to highlight the selected item.
➜ RAW: Original digital signals
output.
➜ PCM: Convert to PCM signals
to output.
Press OK.
Press the 1 key and return to the SPDIF SETUP
menu.
5
6
1
2
3
4
Pro Logic setup
This item is used for settings of Dolby Pro Logic
signals.
Press SYSTEM MENU to enter
the SETUP menu.
Press the 34 keys to choose the PRO LOGIC
SETUP menu.
Press OK to enter.
Press the 34 keys to highlight the PRO LOGIC
item.
Press OK to open its submenu.
Enter its submenu by pressing the 2 key.
Move the cursor by pressing the 34 keys to
highlight the selected item.
➜ ON: Output the Dolby Pro
Logic signals.
➜ OFF: Forbid the Dolby Pro
Logic signals to send output.
➜ AUTO: Whether PRO LOGIC is ON or OFF, it
depends on the audio format of the disc being
played back.
1
2
5
6
3
4
LPCM 96K mode
In this menu, you can set up sampling rate to
decode LPCM audio.
Press the 34 keys to highlight the LPCM 96K
item.
Press OK to open its submenu.
Enter its submenu by pressing
the 2 key.
Move the cursor by pressing the
34 keys to highlight the
selected item.
➜ ON: Detect the loading disc for appropriate
sampling rate.
➜ OFF:The decoding process is under the
sampling rate of 48KHz.
Press OK.
5
6
7
1
2
3
4
8
9
Press OK.
Press the 1 key and return to the SPEAKER
SETUP menu.
5
6
10 Press the 34 keys to highlight the MAIN PAGE
Press the 1 key to return to the SPDIF SETUP
menu.
and confirm by pressing OK.
19
DVD616K IFU fo2r0/0725.31.20, 1:33 PM3141 016 18911
DVD 765K/751 English IFU
19
” «
Setup Menu
Video Out Setup
There are items included in VIDEO OUT PAGE
menu asTV DISPLAY, VIDEO OUTPUT, TV
TYPE, PICTURE SOURCE, PROGRESSIVE SCAN,
BRIGHTNESS.
16:9
1
2
3
Press STOP twice.
4:3
Letter Box
Press SYSTEM MENU to enter its menu.
Highlight theVIDEO OUTPUT SETUP item by
pressing the 34 keys.
4
Press OK.
4:3
Pan Scan
Video output
In this menu, you can setup the video output for
high quality video performance.
Press the 34 keys to highlightVIDEO OUTPUT
in theVIDEO OUTPUT SETUP menu.
Press the OK key to open its submenu.
Press the 2 key to highlight the item of the
submenu.
1
Setup the item as follows,
Press the 34 keys to highlight the TV DISPLAY
item in the GENERAL SETUP menu.
Press the OK key.
1
2
2
3
3 Enter its submenu by pressing
the 2 key.
4 Move the cursor by pressing the 34 keys to
highlight the selected item.
4 Press the 34 keys to choose an item.
➜ S-VIDEO:Video signals will send an output
from the S-VIDEO on the rear panel of the DVD
player.
5
6
Press OK.
➜ YPBPR: If yourTV set is equiped withY/PB/PR
input, you can choose for high quality picture.
Press OK.
Press the 1 key to return to the GENERAL
SETUP menu.
NOTE: Any selection will not influence the signal
output of composite video.
Press the 1 key to return to the GENERAL
SETUP menu.
5
6
TV type
Before viewing the DVD orVCD, ensure that the
PAL or NTSC setting of the system matches your
TV set.
1
2
Press the 34 keys to highlight
TVTYPE in the GENERAL
SETUP menu.
TV display
Select the aspect ratio of the TV to be connected.
16:9 ➜ when you connect a wide-screenTV to
the DVD player.
4:3 LETTER BOX ➜ when you connect a
normalTV to the DVD player. Displays a wide
picture with bands displayed on the upper and
lower portions of theTV screen.
4:3 PAN SCAN ➜ when you connect a normal
TV to the DVD player. Displays the wide picture
on the wholeTV screen with a portion
automatically cut off.
Press OK.
3 Enter its submenu by pressing the 2 key.
4 Move the cursor by pressing the 34 keys to
highlight the requisite item.
5
6
Press OK.
Press the 1 key to return to the GENERAL
SETUP menu.
NOTE: Choosing NTSC item indicates that the
player will output by NTSC system, Similarly, you
can sacquire PAL system by choosing the PAL item.
And the item MULTI means video output is
depending on the format of DVD or VCD discs.
20
DVD616K IFU for /751 3141 016 18911
2002.3.20, 1:33 PM
DVD 765K/751 English IFU
20
” «
Setup Menu
Picture Source
Preferences setup
For some DVD discs, DVD player may not
recognize properly if the disc type is progressive
or not, you’d better to select the correct disc type
manually for best video performance.
Press the 34 keys to highlight the PIC SOURCE
item in theVIDEO OUTPUT SETUP menu.
Press OK.
There are items included in PREFERENCES menu
as AUDIO, SUBTITLE,
DISC MENU,PARENTAL CONTROL,
PASSWORD, DEFAULT and SMART NAV.
Press the STOP key twice.
Press SYSTEM MENU to enter its menu.
Highlight the PREFERENCES item by pressing the
34 keys.
1
2
1
2
3
3 Enter its submenu by pressing the 2 key.
4 Move the cursor by pressing the 34 keys to
highlight the selected item.
4
Press OK to confirm your selection.
➜ AUTO: playback the disc automatically.
➜ FILM: the DVD disc is progressive
➜ VIDEO: the DVD disc is interlaced
Audio language
DVD discs are available for multiple audio
languages. Use this item to
choose your preferred default
audio language.
5
6
Press OK.
Press the 1 key to return to theVIDEO
OUTPUT SETUP menu.
1
Press the 34 keys to highlight
the AUDIO item.
Progressive Scan
2
3
4
Press OK to open its submenu.
Enter its submenu by pressing the 2 key.
Move the cursor by pressing the 34 keys to
highlight the selected item.
Press OK.
This menu indicates the video output status
whether it is progressive scan or not.
Press the 34 keys to highlight the PROSCAN
item in theVIDEO OUTPUT SETUP menu.
Press OK.
1
2
5
6
Press the 1 key to return to the PREFERENCES
menu.
To select the progressive scan mode to output
video signals for best video performance, first, be
sure you have connected the component video
cables between DVD player and TV set.
Press PROGRESSIVE SCAN on the front panel
to select progressive scan mode or not.
NOTE:Your DVD disc may not include the audio
language which you set in the SETUP menu. If so,
the player will use other audio language instead.
0
Subtitle language
DVD discs are available for multi-subtitle language.
This item is used to choose
default subtitle language.
Press the 34 keys to highlight
the SUBTITLE item.
Press OK to open its submenu.
Enter its submenu by pressing the 2 key.
Move the cursor by pressing the 34 keys to
highlight the selected item.
Brightness
1
2
Press the 34 keys to highlight BRIGHTNESS in
theVIDEO OUT SETUP menu.
Press OK to open its submenu.
1
3 Press the 2 key to highlight the item of the
submenu.
2
3
4
4 Press the 34 keys to adjust the brightness level.
5
6
Press OK.
Press the 1 key to return to theVIDEO
OUTPUT SETUP menu.
5
6
Press OK.
Press the 1 key to return to the PREFERENCES
menu.
NOTE:Your DVD disc may not include the subtitle
which you set in the SETUP menu. If so, the player
will use other audio language and subtitle instead.
21
DVD616K IFU fo2r0/0725.31.20, 1:33 PM3141 016 18911
DVD 765K/751 English IFU
21
” «
Setup Menu
Disc menu language
DVD
Parental Control
DVD discs are available for multiple disc menu
languages.This item is used to choose default disc
menu language.
Movies on DVDs may contain scenes not suitable
for children.Therefore, discs may contain‘Parental
Control’ information which applies to the
complete disc or to certain scenes on the disc.
These scenes are rated from 1 to 8, and
1
Press the 34 keys to highlight
the DISC MENU item.
Press OK to open its submenu.
Enter its submenu by pressing the 2 key.
Move the cursor by pressing the 34 keys to
highlight the selected tem.
2
3
4
alternative, more suitable scenes are available on
the disc. Ratings are country dependent.The
‘Parental Control’feature allows you to prevent
discs from being played by your children or to
have certain discs played with alternative scenes.
0 VCD, SVCD, CD has no level defination, so
parental control function has no effect on those
kinds of discs as well as most of illegal DVD discs.
0 You can follow the steps below to setup the
parental control:
5
6
Press OK.
Press the 1 key to return to the PREFERENCES
menu.
NOTE: If your DVD disc doesn’t include disc menu
language you have set,the player will use other
recorded language instead.
1
Press the 34 keys to highlight
the PARENTAL item.
Password
This password is used for the parental control
and disc lock. Enter your password when you are
required by the DVD player.
2
3
Press OK to open its menu.
Move to its submenu by pressing
the 2 key.
1
2
Press the 34 keys to highlight the PASSWORD
item.
Press OK to open its submenu.
4 Then use the 3/4keys to highlight a rating from
1 to 8 for the disc inserted.
5
Press OK to confirm, then press the 1 key to
return to the PREFERENCES menu.
3
4
Enter its submenu by
pressing the 2 key.
No Parental Control
Parental Control is not activated.The Disc will be
played in full.
Select NO PARENTAL item.
Press OK.
Move the cursor by pressing the 34 keys to
highlight the selected item.
Enter the current 4 digit code.
If successful, the player will prompt for a new one.
After that, enter the new password again to
reconfirm.
Press the PLAY key to return to the
PREFERENCES menu.
➜The new 4 digit code will take effect.
1
2
5
6
7
Ratings 1 to 8:
The disc contains scenes not suitable for children.
If you set a rating for the player, all scenes with
the same rating or lower will be played. Higher
rated scenes will not be played unless an
alternative which has the same rating or lower is
available on the disc. If no suitable alternative is
found, playback will stop and the 4-digit code has
to be entered.
8
NOTE:
1.You can change the setup of parental control
and disc lock with a recognise password being
entered.
2. If you forget the password, you can enter the
default password 3308 and replace your password
after logging on.
DVD 765K/751 English IFU
22
2002.3.20, 1:33 PM
” «
Setup Menu
Default setup
If some problems occur during setting DVD, the
item DEFAULT is used to reset all items to
factory default and all your personal setting will
be erased.
1
Press the 34 keys to highlight the DEFAULT
item.
2
3
Press OK to open its menu.
Enter its menu by pressing the 2
key.
4
Press OK.
NOTE:When this function is executed, all setups
will be reset to factory defaults.
Smart Navigator
In this menu, it contains of the setting when you
playback picture CD and MP3 CD.
Press the 3 4key to highlight the PREFERENCE
item.
2
3
4
Press OK to open the PREFERENCE menu.
Press the 3 4to highlight the SMART NAV
menu.
5
6
7
Press OK to open the menu.
Press 2to enter the menu.
Press 3 4to highlight the NO MENU orWITH
MENU item.
➜ NO MENU: playback all images or MP3
musics in sequence automatically
➜WITH MENU:playback images or MP3 musics
in the selected folder.
8
Press the OK key to confirm your selection
DVD 765K/751 English IFU
23
2002.3.20, 1:33 PM
” «
Specifications
PLAYBACK SYSTEM
DVDVideo
AUDIO PERFORMANCE
DA Converter
24bit
Video CD & SVCD
CD
Signal-Noise (1KHz)
Dynamic range(1KHz)
>95dB
>80dB
MP3-CD
DVD
fs 96 kHz
4Hz- 44kHz
PICTURE CD
CD-R, CD-RW
DVD+RW
fs 48 kHz
fs 48 kHz
fs 44.1kHz
fs 44.1kHz
4Hz- 22kHz
4Hz- 22 KHz
4Hz- 20kHz
4Hz- 20kHz
SVCD
CD/VCD
VIDEO PERFORMANCE
* CVBS
1Vpp --- 75Ω
TV STANDARD (PAL/50Hz) (NTSC/60Hz)
* S-VIDEO
Y: 1.00Vpp --- 75Ω
C: 0.30Vpp --- 75Ω
Y: 1.00Vpp --- 75Ω
PR: 0.7Vpp --- 75Ω
PB: 0.7Vpp --- 75Ω
Number of lines
Playback
625
525
Multistandard
(PAL/NTSC)
* Component video
CONNECTIONS
Component Video Output
Cinch
S-Video Output
Mini DIN 4-pins
Video Output
Audio Output(5.1)
Audio Output(L+R) Cinch
Digital Output
Cinch
Cinch
AUDIO FORMAT
Digital
Mpeg/ AC-3/ DTS
compressed Digital
16, 20, 24 bits
PCM
1 coaxial / optical
fs, 44.1, 48, 96 kHz
24, 32, 56, 64, 96, 128,
256 kbps & variable
bit rate fs, 16, 22.05,
24, 32, 44.1, 48 kHz
IEC958 for CDDA / LPCM/ MPEG1
IEC1937 for MPEG 2, Dolby
Digital and DTS
MP3(ISO 9660)
Analog Sound Stereo
Full decoding of Dolby Digital and DTS multichannel surrond
sound
CABINET
Dimensions (w x d x h)
Weight
435 x 286 x 75 mm
Approximately 3.0 Kg
Specifications subject to change without prior notice
Maintenance
Cleaning the Cabinet
¶
Use a soft cloth slightly moistened with a mild
detergent solution. Do not use a solution
containing alcohol, spirits, ammonia or abrasives.
Cleaning Discs
¶
¶
When a disc becomes dirty, clean it with a
cleaning cloth.Wipe the disc from the center out.
Do not wipe in a circular motion.
Do not use solvents such as benzine, thinner,
commercially available cleaners, or antistatic spray
intended for analog records.
24
DVD616K IFU for /751 3141 016 18911
2002.3.20, 1:33 PM
DVD 765K/751 English IFU
24
” «
Troubleshooting
WARNING
Under no circumstances should you try to repair the system yourself, as this will invalidate the
warranty. Do not open the system as there is a risk of electric shock.
If a fault occurs, first check the points listed below before taking the system for repair.If you are
unable to remedy a problem by following these hints,consult your dealer or service center.
Problem
Solution
No power
No picture
–
Check if the AC power cord is properly connected.
–
–
Check if theTV is switched on.
Check the video connection.
Distorted picture
–
–
The disc is badly scratched or dirty.
Sometimes a small amount of picture distortion
may appear .This is not a malfunction.
Completely distorted picture or
black/white picture with DVD
orVideo CD
–
Make sure the NTSC/PAL setting at the DVD
player matches the video signal of your television.
(See NTSC/PAL Conversion)
No sound or distorted sound
–
–
Adjust the volume.
Check that the speakers are connected correctly.
No audio at digital output
–
–
Check the digital connections.
Check the settings menu to make sure the digital
output is set to ALL or PCM.
–
Check if the audio format of the selected audio
language matches your receiver capabilities.
Disc can’t be played
–
–
Ensure the disc label is facing up.
Check if the disc is defective by trying another disc.
No return to start-up screen when
disc is removed
–
Reset the unit by switching the player off, then on
again.
The player does not respond to
the remote control
–
Aim the remote control directly at the sensor on
the front of the player.
–
–
–
Reduce the distance to the player.
Replace the batteries in the remote control.
Insert the batteries with their polarities (+/– signs)
as indicated.
Buttons do not work
–
–
–
In order to completely reset the player, unplug the
AC cord from the AC outlet.
Player does not respond to some
operating commands during playback.
Operations may not be permitted by the disc.
Refer to the instructions of the disc.
DVDVideo player cannot read
CDs/DVDs
Use a commonly available cleaning CD/DVD to
clean the lens before sending the DVDVideo player
for repair.
25
DVD616K IFU fo2r0/0725.31.20, 1:33 PM3141 016 18911
DVD 765K/751 English IFU
25
” «
Meet Philips at the Internet
DVD765K
CLASS 1
LASER PRODUCT
The products and services described herein
are not necessarily available in all countries
Due to continuous product improvements this
document is subject to change without notice.
DVD 765K/751 English IFU
28
2002.3.20, 1:33 PM
” «
|