Welcome
Quick start guide
Connect
1
2
3
Install
Enjoy
philips
Connect
1. Insert the plug of the power cord into the
socket under the base station.
1
Connect the base station
2
1
2. Insert the plug of the line cord into the
socket under the base station.
3. Connect the other end of the line cord
together with the line adaptor if
necessary, to the telephone line socket
and the other end of the power cable
to the electricity socket.
3
Install
2
Insert rechargeable batteries and charge
Charge handset for 24 hours
Insert batteries
Set the time
1. Press
2. Press
3. Press
4. Press
to access the main menu
to select Clock & Alarm
to select Set Date/Time
/
5. Enter the current time (HH:MM) in 12-hour format and the current date
(MM/DD/YY)
6. Press
to save the settings
Enjoy
3
Make a call
Press
and dial the number
OR
Dial the number and press
or
or
Answer a call
When the phone rings, press
.
End a call
Press
Set the alarm
1. Press
2. Press
3. Press
4. Press
5. Press
to access the main menu
/
to select Clock & Alarm
and
and
/
/
to select Alarm
to select Off, On Once, or On Daily
to save the settings
Rename your handset
1. Press
2. Press
3. Press
4. Press
5. Press
to access the main menu
to select Personal Set
to select Handset Name
to enter the handset name
to save the settings
/
and
/
Set the earpiece volume
During a call:
Press
/
to select the earpiece volume from level one to level five
Set a wallpaper to be displayed in standby mode
1. Press
2. Press
3. Press
4. Press
5. Press
to access the main menu
/
to select Personal Set
and
and
/
/
to select Wallpaper
to scroll to your desired wallpaper
to save the settings
Set the ring melody
1. Press
2. Press
3. Press
4. Press
5. Press
6. Press
to access the main menu
to select Personal Set
to select HandsetTones
/
and
and
/
/
to select Ring Melody
to scroll to your desired ring melody
to save the settings
Store a number in the phonebook
1. Press
2. Press
3. Press
to access the main menu
/
and
to select Phonebook
to select New Entry
4. Enter the name (maximum 12 characters)
5. Press
6. Press
to enter the number (maximum 24 digits)
to choose a group (<No Group>, <Group A>, <Group B>,
<Group C>)
7. Press
to save the entry
Access the phonebook
1. Press
2. Press
3. Press
to access the phonebook
to select your desired phonebook entry
to view the details of your selected phonebook entry
/
Listen to new messages recorded on answering machine (applicable to
CD645 only)
1. Press
2. Press
3. Press
4. Press
on the base station to turn on the answering machine
on the base station, playback of the oldest new message will begin.
to skip the current message and play the next message
to go back to previous message if it is pressed within one second of
current message playback
5. Press
to replay current message if it is pressed after one second of current
message playback
6. Press
7. Press
to increase or
to delete the current message
to decrease speaker volume during message playback
See CD645 user manual for details about the answering machine function.
Troubleshooting
For more information, see the user manual that came with your CD640 or
CD645.
Problem
Solution
●
●
●
Charge the batteries for at least 24 hours
Move closer to the base station
Use the line cable provided in the box
No dialing tone
●
●
Poor audio quality
Move closer to the base station
Move the base station at least one metre away
from any electrical appliances
●
●
The
is blinking
Register the handset to the base station
Move closer to the base station
●
The handset LCD
displays nothing
Try again by disconnecting and connecting the
base station power supply and follow the
procedure to register a handset
Make sure the two supplied rechargeable batteries
have been inserted into the battery compartment
Make sure the supplied batteries are
charged up
●
●
●
Check your subscription with your
network operator
Caller Line Identification
(CLI) service does not
work
Need help?
User Manual
See the User Manual that came with your CD640 or CD645.
Online help
|