Philips Cell Phone E GSM 900 User Manual

 
How to...  
Discover Your Phone  
65,000 colour  
main screen  
Switch the phone  
On/Off  
Long press ).  
Back of the  
phone:  
camera lens  
Navigation  
Enter your PIN  
code  
Enter your PIN code using  
the keypad and press OK or  
Lto confirm.  
and  
,keys  
Right softkey  
Left softkey  
Pick up key  
Make a call  
Enter the phone number on  
the keypad and press (  
to dial.  
Hang up, cancel  
and on/off key  
Alphanumeric  
keypad  
End a call  
Press ).  
Answer a call  
Press ( when your  
phone rings.  
Microphone  
Charger /headset  
connector  
Reject a call  
Press ) when your  
phone rings.  
Activate/deactivate  
the loudspeaker  
Long press (during a  
Philips continuously strives to improve its products.  
Therefore, Philips reserves the rights to revise this user  
guide or withdraw it at any time without prior notice.  
Philips provides this user guide "as is" and does not  
accept, except as required by applicable law, liability for  
any error, omission or discrepancy between this user  
guide and the product described. The device is meant to  
be connected to GSM/GPRS networks.  
call.  
Lock /Unlock  
the keypad  
Long press #.  
Long press 6.  
Long press 5.  
Activate the Silent  
mode  
Activate the flash  
 
Business  
Multimedia  
Entertainment  
Access QuickCall  
Press +in idle mode.  
Access the Names list Press -in idle mode.  
Access the Sound  
Press >in idle mode.  
page 10  
page 16  
page 20  
Album  
Operator  
Messages  
Settings  
Access the Picture  
album  
Press <in idle mode.  
Access the Call list  
Press (in idle mode.  
The Call list displays alls calls  
missed, dialled and received.  
page 38  
page 25  
page 22  
Camera  
Contacts  
Call Info  
Access the  
Main Menu  
Press OK or LMenu in  
idle mode.  
page 52  
page 47  
page 56  
Go to previous menu Press R Back when  
available.  
Main Menu  
Quickly return  
to idle  
Press ).  
The Main Menu gives you access to all the different  
features of your mobile phone presented in the form  
of  
a
grid. The table above summarises the  
Softkeys  
arrangement of the Main Menu, the meanings of the  
various icons found there, and the page in this manual  
where more detailed information concerning the  
subject can be found.  
Press ,to access the Main Menu when in idle  
mode, then use the central navigation key - which  
directions are represented in the present guide with  
The left and right soft keys - Land R- located  
at the top of the keypad allow you to select the  
corresponding options that appear on the screen  
immediately above them, including during calls. The  
functions associated with these keys will vary  
according to the current context.  
 
the +, -, <or >signs - to browse the  
icons and lists. When navigating in a list, a scroll bar  
located on the right hand side of the screen shows  
your current position in the list. Within lists, press  
,to access the options related to the selected  
item, press select RBack to go back one level.  
Chapter 2:  
Calling  
Information on how to make and  
receive calls.  
Chapter 3:  
Text entry  
Information on how to enter text  
using the numeric keypad.  
Chapters 4  
to 12  
These chapters treat each element of  
the Main Menu one at a time.  
How to use this manual  
The current manual is structured as follows:  
Other  
sections  
After Chapter 12 appear the sections  
for Icons & Symbols, Precautions,  
Philips authentic accessories, SAR  
Discover  
your phone  
The current section. Presents an  
overview of your mobile phone and  
information on the most commonly  
used features.  
information  
(if  
available  
at  
publication, otherwise included as a  
separate document), and finally the  
Declaration of Conformity.  
Chapter 1:  
Getting  
started  
Information on how to set up your  
mobile phone for the first time:  
installation of the SIM card, battery,  
etc.  
 
Table of contents  
Alarm clock ..................................................... 14  
1. Getting Started ............................................1  
Infrared ............................................................. 14  
Auto Switch On / Off ................................... 16  
Services + ........................................................ 16  
Inserting the SIM card ......................................1  
Switching on the phone ...................................2  
Charging the battery ........................................3  
Setting Hotkeys .................................................3  
5. Multimedia ................................................... 17  
Memory status ................................................ 17  
Links .................................................................. 17  
Sound album ................................................... 17  
Picture album .................................................. 18  
Demo mode .................................................... 19  
TV slideshow .................................................. 20  
2. Calling ................................................................4  
Make a call ..........................................................4  
Answer and end a call ......................................4  
Adjust the earpiece volume ............................4  
Call handsfree ....................................................5  
Options during a call ........................................5  
Quickcall .............................................................6  
Handling multiple calls .....................................6  
6. Entertainment ........................................... 21  
WAP ................................................................. 21  
Brick game ....................................................... 24  
In-Fusio ............................................................. 24  
Flash .................................................................. 24  
Java .................................................................... 24  
3. Text Entry ......................................................9  
T9® text input ...................................................9  
Basic text input ............................................... 10  
4. Business ......................................................... 11  
7. WAP ............................................................... 26  
8. Messages ....................................................... 27  
Calculator ........................................................ 11  
Money converter ........................................... 11  
Organiser ......................................................... 11  
World clock ....................................................12  
Sound recording .............................................13  
Settings ............................................................. 27  
Create message .............................................. 31  
Inbox ................................................................. 34  
i
 
QuickCall ......................................................... 52  
Names list ........................................................ 52  
Add a contact ................................................. 55  
Service numbers ............................................. 55  
Status ................................................................ 55  
9. Settings .......................................................... 39  
Time and date ................................................. 39  
Autonomy ........................................................ 39  
Security ............................................................. 39  
Profiles ..............................................................41  
Sounds ..............................................................41  
Display ..............................................................42  
Network .......................................................... 43  
Shortcuts .......................................................... 45  
Language ........................................................... 46  
12. Call Info ...................................................... 56  
Counters .......................................................... 56  
Settings ............................................................. 57  
Call list .............................................................. 58  
Icons & symbols ............................................ 59  
Troubleshooting ........................................... 60  
Philips Authentic Accessories .............. 62  
Precautions ....................................................... 64  
SAR Information - EU (RTTE) ............. 69  
SAR Information - International  
10. Camera .......................................................47  
How to... .......................................................... 47  
Camera menu ................................................. 49  
Help ................................................................... 51  
11. Address book ......................................... 52  
Copy to phone ............................................... 52  
Contacts select ............................................... 52  
Delete all .......................................................... 52  
(ICNIRP) ............................................................ 70  
 
Remove the battery  
1. Getting Started  
To remove the battery, press the inner clips outwards,  
then remove the battery by pulling it up from the  
bottom.  
Please read the safety instructions in the "Precautions"  
section before use.  
To use your phone, you must insert a valid SIM card  
supplied by a GSM operator or retailer. The SIM card  
contains your subscription information, your mobile  
telephone number, and a memory in which you can  
store phone numbers and messages (for more  
information, see “Address book” on page 52).  
You may lose all your personal settings if you remove  
the battery when the phone is switched on.  
Inserting the SIM card  
Remove the back cover  
Insert the SIM card  
To insert the SIM card, you must first remove the  
back cover. Press on the clips and then lift the cover as  
shown below.  
Slide the SIM card holder to unlock it. Remove the  
SIM card from its protective holder and place it in the  
space provided, making sure that the clipped corner of  
the card is in the correct corner and that the gold  
contacts are facing down. Slide the card holder into  
the locked position.  
Getting Started  
1
 
   
Replace the battery as shown below, connectors  
downwards.  
preconfigured and communicated to you by your  
operator or retailer. For more information on PIN  
codes, see “Display” on page 42.  
If you enter an incorrect PIN code three times, your  
SIM card will be blocked. To unblock it, you must  
request the PUK code from your operator.  
When you switch on your mobile phone with your  
new SIM for the first time, you will be asked for the  
following:  
Replace the back cover as shown below: hook the  
housing into the hindge on the top of the phone, then  
press the bottom down until the latch catches.  
Set date  
Set time  
To set the current date.  
To set the current time.  
See “Settings” on page 39 for details on these three  
items.  
Copy SIM  
names into  
the phone?  
If your phone detects any names and  
telephone numbers in the SIM card  
phonebook, you will be asked if you  
want to copy them into the onboard  
phone book. If you wish to copy the  
numbers, press Yes, otherwise press  
No.  
Remove the protective film covering the screen, the  
camera and the infrared lenses before using the phone.  
Switching on the phone  
To switch on the phone, long-press the )key.  
Enter the PIN code if required. A PIN code is a 4- to  
8-digit secret code for your SIM card. It is  
2
Getting Started  
 
 
The battery symbol indicates the state of charge.  
During charging, the charge indicators will scroll; it  
takes around 2.5 hours to fully recharge your mobile  
phone. When all the scroll bars are steady the battery  
is fully charged. You can then disconnect the charger.  
Depending on the network and condition of use, talk  
time goes up to 6 hours and stand-by time up to 400  
hours.  
Keeping the charger plugged to the mobile when the  
battery is fully charged will not damage the battery.  
The only way to turn off the charger is to unplug it,  
so use an easily accessible AC power socket. You can  
connect the charger to an IT supply (Belgium only).  
Charging the battery  
Your phone is powered by a rechargeable battery. A  
new battery is partially charged and a sound alert will  
warn you when the battery reaches low, if the battery  
alert in On (see “Sounds alerts” on page 42).  
Once the battery and battery cover are back in place  
you can charge the phone. Pull away the protective  
rubber cap covering the charger connector (it is  
attached to the phone so that you cannot lose it). Plug  
in the connector as shown below. Then plug the other  
end into a main AC power socket.  
Setting Hotkeys  
You can configure the numeric keys 2 to 9 (except 5,  
which is locked, used for the flash) to access your  
favourite features simply by long-pressing on the  
numeric key. A number of hotkey shortcuts are pre-  
configured. For more information, see “Shortcuts” on  
page 45.  
Getting Started  
3
 
   
Answer and end a call  
2. Calling  
When receiving a call, the number of the caller may be  
displayed, depending on whether or not the person  
calling has chosen to display his or her ID. If the  
number is stored in the selected phonebook, then the  
corresponding name is displayed instead of the  
number.  
Make a call  
From the idle screen  
1. In idle mode, enter the phone number using the  
keypad. To correct an error, press R<C.  
2. Press (to dial.  
Answer the call: press (.  
3. Press )or REnd call to hang up.  
For an international call, long press *to enter the  
"+" sign for the international prefix.  
Reject the call: press ). If you have activated Call  
forward (see page 57), the call is diverted to a  
number or voice mail.  
Mute the ringer: press R Mute (this only  
switches the sound and the vibra alert off without  
rejecting/accepting the call).  
Using the phonebook  
1. Press -in idle mode to access the menu, then  
,or LSelect to access the list.  
2. Select a contact in the list. If you are using the  
onboard phonebook and the selected contact  
features more than one number, the number  
identified as the default will automatically be  
Hang up: press ).  
The phone will not ring if in Silent mode (see page 42).  
If you have selected Any Key Answer, you can accept a  
call by pressing any key except )(see page 57).  
selected. To select  
a
different number,  
press<or >(see Address book” on page 52  
for more information).  
3. Press (: the selected number is dialled.  
4. Press )or REnd call to hang up.  
Adjust the earpiece volume  
During a call, press the +or -navigation key to  
increase or decrease the volume.  
4
Calling  
 
       
Record dialogue  
Call handsfree  
In most countries, recording telephone conversations is  
subject to legislation. We advise you to notify the caller  
if you intend to record your conversation and only do  
so if they agree.  
For your own comfort and safety, ensure you move the  
phone away from your ear when calling handsfree,  
especially when increasing the volume.  
1. In idle mode, enter the phone number using the  
keypad or select a contact in the phonebook.  
2. Press , or L Options then select Call  
handsfree and press,or LSelect.  
To record a conversation during a call, select Record  
dialogue and press OK. Press OK again or LSave to  
end the recording: an edit window allows you to  
assign a name to the recording, which is then available  
in Multimedia > Sound album > Recordings, and also in  
Business > Sound records.  
If you are already on the phone, long press (to  
switch to handsfree mode and back.  
Depending on memory capacity (see “Memory  
status” on page 17), the number and length of  
recordings will vary.  
Options during a call  
During a call, press ,or LOptions to access the  
If you select Mute and then Record dialogue, only the  
caller’s voice is recorded.  
following options.  
Activate h/free  
This option allows you to use your mobile phone’s  
hands-free option.  
Other options during a call  
Press LOptions to be able to perform the following  
tasks while a call is ongoing: you can access and  
consult the Names list or Call list, hang up by selecting  
End call, change the Equaliser settings, send or read  
SMS, or consult and manage events of the Organiser.  
Mute / Unmute  
Allows you to mute or unmute the microphone so  
that your caller cannot hear you.  
Calling  
5
 
   
The Notepad allows you to note down a number. You  
can then store it in the phonebook, call it, or send a  
message to this number.  
To reconfigure a thumbnail, select it and press ,to  
Replace the name and/or picture.  
If a picture is already associated with a contact, it is  
displayed in the Quickcall screen. Changing the  
picture in one of the menus will also update it in the  
other.  
Quickcall  
To access the Quickcall feature, press +when in idle  
mode. It allows you to set your four most frequently  
dialled numbers. You can then quickly call one of  
them by selecting the corresponding icon or picture  
on the screen.  
Handling multiple calls  
The ability to handle two or more calls at one time  
and to make conference calls is dependent on your  
operator and/or subscription.  
This feature is also available from the main menu, in  
Settings > Shortcuts > QuickCall.  
Making a second call  
You can make a second call during an active call or  
with a call on hold. While on the phone, dial a  
number (or select a contact in the phonebook) and  
press (. The first call is put on hold (the number is  
displayed on the bottom of the screen) and the second  
number is dialled. You can then press OK to access the  
options among which are:  
Setting a Quickcall contact  
1. In idle mode, press+to access the Quickcall  
screen. Select a thumbnail to configure and press  
,or LSet.  
2. Select a name in the contacts list, and press OK  
again to access the Picture album and select a  
picture. Proceed the same way for each  
thumbnail.  
Switch calls to toggle between calls (you can also  
press<or>to switch calls).  
Transfer to connect the two calls. You are dis-  
connected when the transfer is completed.  
Conference to introduce the caller into a confer-  
ence call.  
Calling a Quickcall contact  
To make a call, press+when in idle mode, then  
select the thumbnail of your choice and press (.  
6
Calling  
 
     
one of the calls or introduce the new caller to a  
conference.  
Answering a second call  
When you receive a second call while being already in  
communication, the phone emits a beep alert and the  
screen displays Call waiting. You can then:  
Press )  
To reject the call.  
Press,or  
LOptions  
To open the options list. You can  
select Accept to answer the  
incoming call, or End call to end the  
current call, then answer the  
incoming call.  
Press(  
To answer the call (the first one is  
put on hold).  
Press)  
To reject the call.  
Press,or  
LOptions  
To open the options list. You can  
select End call to end the current  
call, then answer the incoming call.  
This service is limited to two current communications  
(one active and one on hold).  
To receive a second call, you must have deactivated the  
Call forward for voice calls (see page 57) and activated  
the Call waiting (see page 57).  
Conference call  
Subscription dependent.  
A conference call is activated by making several  
outgoing calls or from a multiple call context. It  
allows you to speak with up to five people at the same  
time.  
Answering a third call  
If you are in a call and have one call on hold, you can  
also receive a third call. To do so, you must either end  
1. Make a first call with someone, then a second  
one (see above).  
2. Press , or Options and select Conference.  
Repeat the process until five members are  
connected.  
3. Select Remove party to disconnect a member of  
the conference, or select Private call to have a  
Calling  
7
 
private call with this member only (other  
members are put on hold).  
4. Press )to disconnect all calls at once.  
If there is an incoming call during the conference call  
and there are less than five members, you can accept  
this new call and add this member to the Conference  
call (if five members are already connected, you can  
answer the call, but not add it to the conference).  
8
Calling  
 
Press any of the three keys to insert the  
selected word followed by a space.  
>
1
,
3. Text Entry  
Text can be entered in editing screens in two different  
ways: by using T9® Predictive Text Input or basic text  
input. The techniques for using these two methods  
are discussed below.  
Short press to backspace, long press to  
clear all text.  
R
0
#
To shift letter case: Standard, lower or  
UPPERCASE letters.  
T9® text input  
To view the table of symbols and  
punctuation. Then press L>> or <  
and >to browse the 3 available tables.  
To shift mode from T9® to basic text  
input to numeric.  
T9® Predictive Text Input is an  
intelligent editing mode for entering text  
on a mobile phone. It allows you to enter  
text more quickly by anticipating the  
word you want to enter based on the  
*
Tegic Euro. Pat.  
App. 0842463  
Example: how to enter the word "home":  
1. Press 4663. The screen displays  
keys you have pushed. You press once on the key  
corresponding to each letter needed to spell a word  
and T9® suggests a word based on your keystrokes. If  
several words are available, the first word in the list is  
displayed and highlighted. Press +/-or Lto  
browse the list and press OK to insert the word.  
the first word of a list: Good  
2. Press+or Lto scroll and select Home  
3. Press ,or >to confirm selection of the  
.
.
word Home  
.
Dictionary  
How to use it?  
If the word you want to enter is not in the T9®  
dictionary, you can add it to the database. Press  
L1>2>3 to scroll to the bottom of the list until you  
reach the entry represented by a series of highlighted  
underscores (_ _ _ _ _).  
Letters and symbols represented by each key are as  
follows:  
To key in letters.  
2to 9  
To browse the list of candidate words.  
L 1>2>3  
or +/-  
Text Entry  
9
 
     
Press RSpell to open a basic text editing screen.  
Enter the new word without spaces using the methods  
described below and press LOK when done. You  
are then returned to the message you were composing  
and the new word is inserted.  
Short press  
Long press  
space 1. , @ / : ; " ’ ! ¡ ? ¿ # + - * =  
1
1
% < > ( ) & £ $ ¥  
a b c 2 à ä å æ ç  
d e f 3 é è ꢀ ꢁ  
g h i 4 ì  
2
3
4
5
6
7
8
9
2
3
4
5
6
7
8
9
Language  
You can switch input language while writing a  
message by long-pressing the #key. The available  
languages will depend on where you purchased your  
mobile phone.  
j k l 5 ꢃ  
m n o 6 ñ ò ö  
p q r s 7 ꢄ ꢅ ꢆ ꢇ  
t u v 8 ü ù  
Basic text input  
Press *to switch from T9® to basic text input.  
This method requires multiple key presses to reach the  
desired character: the letter "h" is the second letter on  
the 4 key, so you must press it twice to enter "h".  
Short press RCancel to clear one entry, long press  
to clear all text.  
w x y z 9 ø ꢈ ꢉ  
To shift letter case: Standard,  
lower or UPPERCASE letters.  
0
#
*
0
Example: how to enter the word "home":  
To  
open  
symbols  
and Changes the  
Press 4, 4(  
GHI) 6, 6, 6(MNO), 6  
punctuation mode. Then press language  
Lor <and >to browse used for text  
(MNO), 3, 3(  
DEF). Press , when the  
the 3 available tables.  
edition  
message is completed.  
Letters, numbers and symbols are located on each key  
as described opposite.  
To shift mode: T9®, basic or Also shifts  
numeric.  
mode  
10  
Text Entry  
 
 
Press and hold 0 to get the decimal point.  
Calculator accuracy is to 2 decimal places and is  
rounded up to the higher decimal figure.  
4. Business  
Money converter  
This menu contains features and options designed to  
help you keep you organised and informed while on  
the move.  
This menu allows you to convert a sum from  
one currency into another using the exchange  
rate of your choice. You can convert from  
Calculator  
Local to Foreign or vice versa. Enter a rate in the  
Exchange rate field and an amount in either the Local  
or Foreign fields: the sum is calculated automatically.  
Your phone has a built-in calculator that you  
can use to perform basic calculations.  
Numbers are entered with the keypad and  
operators with the navigation keys as indicated in the  
table below:  
Organiser  
This menu allows to create, store and manage  
events in your organiser. When the organiser  
alert is On (see “Sounds alerts” on page 42), a  
beep alerts you when an event is due.  
Addition  
Press>or the *key.  
Subtraction  
Multiplication  
Division  
Press<or the *key twice.  
Press+or the *key 3 times.  
Press-or the *key 4 times.  
Press ,or #.  
The organiser shares the mobile memory capacity with  
other features (phonebook, picture album, sound,  
etc.). To check the memory available in your phone,  
select Multimedia > Memory status.  
Equals  
An icon at the top of the screen indicates which  
navigation keys to use for entering operators.  
Creating a new event  
1. In Events, select <New>, then the type of event  
to create (Holiday, Meeting, To Do).  
Business  
11  
 
       
2. Enter the starting and ending date and time of  
the event and name it (e.g. "Meeting with  
Smith").  
3. Set a reminder and a frequency: alerts will be  
triggered at the chosen time.  
Change  
To change the selected event.  
Send by  
infrared  
To transmit the selected event to  
another infrared-compatible device.  
Change  
sound  
To change the sound associated with  
the alarm type of the selected event.  
The reminder only applies to Meeting and To Do  
events. It will be updated when changing time zones  
(see “World clock” below).  
Changing a repeating event modifies all instances of  
this event.  
Deleting old events  
Events views  
Events stored in your organiser can be displayed in  
Day view, Week view and Month view. Select a view  
format and press OK, then use  
This menu allows you to delete past events. Enter the  
starting date (past or future) from which all previous  
events will be deleted and press OK twice to delete all  
events preceding this date.  
<or>to display  
the previous or next day, week or month.  
To delete all events set in your organiser, enter a  
starting date several years ahead (e.g. 31st of  
December 2010) to make sure all events preceding this  
date are deleted at once.  
World clock  
This menu allows you to set and display both  
the local time and the time in the foreign time  
zone of your choice. Note that if you choose  
to display the local and foreign time on your home  
screen, the image you selected as your wallpaper will  
no longer be displayed there, but will be replaced with  
the standard World clock wallpaper.  
Managing events  
Select an event in the list and press OK or LOptions  
to access the options described below.  
Delete  
To delete the selected event.  
12  
Business  
 
   
Local settings  
Foreign settings  
Set time  
Allows you to set the time by  
pressing the appropriate keys.  
Foreign time Move+or-to select the time  
zone  
zone of your choice.  
Own time zone  
Daylight saving  
Move+or-to select the  
time zone corresponding to your  
area.  
Daylight  
saving  
Allows you to set the daylight saving  
option On or Off for a foreign time  
zone.  
Allows you to set the daylight  
saving option On or Off for the  
local time zone.  
Alarms, reminders, programmed events are time zone  
independent! If you set an alarm or an event at  
9:00 AM in time zone A, it will still ring or be due at  
9:00 AM if you change to time zone B.  
World clock  
Activate this option if you want to display both the  
local time and the time of another time zone on the  
idle screen. Press+or-to set the option On or  
Off. When On, you can display the zone of your choice  
via the menu Switch local / foreign.  
Sound recording  
This menu allows you to make recordings of  
up to 12 minutes in length, depending on the  
memory status (see “Memory status” on  
page 17).  
Select <New> to begin the recording. The window  
Sound recording appears along with a progress bar.  
When you are finished, press L Save to stop  
recording. You can then either enter a name for the  
new sound file or accept the default name proposed by  
pressing OK. You then return to the list of available  
options applying to the new recording.  
Switch local / foreign  
To display local to foreign zone and vice-versa.  
Business  
13  
 
 
Press RBack to access the list of all recordings.  
When you select sound file, it is played  
automatically in a loop. Press OK to access the  
options. You can Play recording, Rename or Delete it,  
Set as ringer, As SMS/MMS ringer or As reminder. You  
can also send it by Email, IrDA or MMS.  
The alarm clock will ring even if your mobile phone is  
switched off and/or the ringer volume is set to Silent.  
When the alarm rings, press any key to stop it (except  
if the snooze mode is on, see below).  
a
Snooze mode  
This menu allows you to set the snooze mode On or  
Off. When the alarm rings and the snooze mode is On:  
A flashing warning sign indicates that your recording  
will soon reach the maximum authorized length. If  
you do not stop recording, a red envelope icon informs  
you that your recording is too long to be sent via MMS.  
press any key (except RStop) to stop the ring-  
ing temporarily. The alarm will ring again  
around 7 minutes later.  
press RStop to stop the ringing and the alarm  
repetition.  
Alarm clock  
Your mobile phone has a built-in alarm clock  
with a snooze feature. You can set up to three  
separate alarms and choose whether or not  
the alarm should repeat. To set an alarm, follow the  
steps below:  
The snooze mode is automatically deactivated after 9  
alarm repetitions.  
The snooze mode setting applies to all the alarms you  
have set.  
1. Select an alarm and set it On.  
2. Then enter the time and press OK.  
3. Then select the frequency: Once, Every day, On  
weekdays.  
4. Finally, select the type of alarm: the Buzzer or a  
melody from the sounds album and press OK.  
Repeat above steps to set other alarms.  
Infrared  
Your mobile phone has an infrared port that  
allows you to send or receive data to or from  
other infrared-compliant devices (e.g.  
another mobile phone, a computer, a PDA, etc.)  
through a wireless link.  
14  
Business  
 
     
Receiving data  
Files that are copyright protected cannot be sent.  
When connecting with a PC, make sure you have  
activated its infrared option.  
When you select Receive your phone is ready to  
receive an item via infrared and waits for the another  
infrared device to send it. As with sending data,  
messages are displayed on the screen and allow you to  
follow the process.  
Position of devices  
Before transmitting data between two devices, they  
must be correctly positioned in relation to one  
another. Make sure that:  
Receiving is cancelled if your phone isn’t contacted by  
another device before the time out is reached, if the  
infrared link is broken, if the size of the file sent is too  
large or if you cancel the process.  
• the infrared ports are facing each other,  
• they are at a less than 50 cm away from each other.  
• nothing obstructs the infrared beam.  
Saving the data  
Sending data  
A message will appear to inform you that you have  
received a file. Press OK to access the options described  
below.  
To send data via infrared from your mobile phone,  
you must first select the item to be sent: when  
selecting a picture, a sound, a name or an event, a sub-  
menu then gives you access to the Send via infrared  
option.  
Save  
To save the data, eventually rename the  
file.  
As soon as your phone finds another infrared  
compliant device to communicate with, the sending  
automatically takes place. Messages are displayed on  
the screen for you to follow the process.  
Show  
Discard  
To display the details of the data you  
have received.  
To ignore the data received.  
Sending is cancelled if your phone cannot find another  
device before the time out is reached, if the infrared  
link is broken, or if you cancel the process.  
Business  
15  
 
OK. Select the desired frequency from Once, Every  
day, or On weekdays and press OK. A message appears  
to confirm activation.  
Auto Switch On / Off  
These two separate menus allow you to set your  
mobile phone to switch itself on or off at pre-set times.  
This lets you extend your phone’s battery life (e.g.  
during the night), not be disturbed at given times and  
have your phone switch back on automatically.  
To set Auto switch on, select the option and press OK.  
Select On and press OK. Enter the time at which you  
want your mobile phone to switch itself on and press  
Services +  
This menu option is reserved for operator-  
specific services. Please contact your operator  
for more information about these options.  
16  
Business  
 
   
Links  
5. Multimedia  
This menu gives you access to preconfigured WAP  
links. Select a link and press LSelect to launch the  
connection.  
Memory status  
Sound album  
This menu allows you to display the  
percentage of memory available in your  
phone. Various features share the memory  
capacity: pictures, sounds, recorded memos and voice  
tags for voice commands, stored messages, phonebook  
and organiser entries, games, etc.  
Press OK to check the memory status. The display  
shows you the percentage of memory free and the  
phone’s total memory in Kilobytes (Kb). Press OK  
again to check the detailed list of memory used by  
each feature.  
Your mobile phone is supplied with many sounds and  
pictures. You can only delete sounds or pictures in the  
Own melodies, My images or My photos folders, e.g. to  
free memory space for your own sounds and pictures.  
If the List full message appears when saving a new item  
you must delete an item to be able to create or add a  
new one.  
This menu allows you to manage the sound  
files stored in your mobile phone. The  
options are:  
<Get  
more...>  
To launch the WAP application and  
download new sound files.  
View all  
To access all your sound files in a  
single list.  
Own  
melodies  
To access your downloaded sound  
files.  
Protected  
melodies  
To access the list of copyright  
protected sample sounds.  
Protected melodies cannot be sent  
nor deleted.  
Recordings  
To access the list of sound  
recordings.  
Multimedia  
17  
         
Once in a list, you can then select a sound file and  
press OK to access the menu options listed below.  
Pictures must be of the correct size and in the format  
for your mobile phone to store and display them  
correctly. See “Settings” on page 51 for details.  
Send by...  
To send the selected sound file via  
E-mail (see page 31), via Infrared (see  
page 14) or MMS (see page 33).  
Note that sound files from  
Recordings folder cannot be sent via  
MMS.  
<Get  
more...>  
To launch the WAP application and  
download new image files. For more  
information, see page 26.  
View all  
To access all your image files in a  
single list.  
Set as ringer  
To set the selected sound as ringer.  
My photos  
My images  
To access the photos taken with the  
phone’s built-in camera.  
As SMS/  
MMS  
To set the selected sound as the  
Messages ringer. This option must  
be activated in the menu Settings >  
Sounds (see page 39).  
To access the images you have  
received on your phone.  
Rename  
To Rename the selected sound file.  
Protected  
images  
To access the list of protected sample  
images.  
Delete /  
To Delete the selected sound file or  
Delete all  
all files at once.  
Protected pictures cannot be sent nor  
deleted.  
Picture album  
Icons  
To access the list of icons you have  
downloaded.  
This menu allows you to display and modify  
the images stored in your mobile phone. The  
Inside the folders, images are displayed as a text list.  
Select an image and press >to view the image.  
Pressing OK gives you access to the menu options  
listed below.  
options are described below.  
18  
Multimedia  
   
Send by...  
To send the selected file via E-mail  
(see page 31), via Infrared (see  
page 14) or MMS (see page 33).  
Note that you cannot send pictures  
that are protected by copyright.  
To save the picture with all the  
changes you have applied.  
• Save  
To send the selected picture via  
infrared, E-mail or MMS.  
• Send  
Rotate  
Use this option to rotate the selected  
image of -90 degrees, -90 degrees or  
+180 degrees.  
Set as  
wallpaper  
To set the selected picture as  
wallpaper.  
Modify  
picture  
Use this menu to access the  
following options:  
View  
To display the selected file.  
Properties  
To display its properties (size,  
format, resolution, etc.).  
To add text to the selected picture.  
Enter your text in the editing screen  
and press OK. Use the navigation  
keys to move the text on the screen:  
short press to move the text 1 pixel  
at a time, long press for 5 pixels.  
Press RBack to go back to the  
text editor, or LOK to validate  
and go to the next option.  
• Add text  
Rename  
To Rename the selected image.  
Delete /  
Delete all  
To Delete the selected file or all files  
at once.  
Pictures in the Protected images  
folder cannot be sent nor deleted.  
Demo mode  
To add a frame or an icon to the  
selected picture.  
• Graphics  
• Eraser  
This menu displays a short video clip.  
This menu option is available even if you  
have not inserted a SIM card.  
To Undo the last action made on the  
picture, or All change, i.e. cancel all  
changes at once. Press RBack to  
cancel or LOK to validate.  
Multimedia  
19  
 
TV slideshow  
Automatic  
This menu allows you to display the pictures  
This menu allows you to display the pictures  
automatically in a slideshow.  
listed in the Picture album (automatically in a  
slideshow or manually one-by-one) on the  
main internal screen of your phone and/or on a TV  
screen via the TV Link accessory.  
1. Select the time value that will be applied  
between each picture of the slideshow (10, 15 or  
20 seconds) and press OK or LSelect.  
2. In the list that appears, select the pictures of your  
choice by pressing < or >. Choose  
<(Un)Check all> to select or deselect all pictures  
at once.  
3. Press OK to start the slideshow and RBack to  
stop it.  
In both modes, the last selection made is  
automatically saved and can be played several times in  
a row, even when you quit the TV Slideshow menu.  
TV Link may not supplied with your product. In this  
case, you must purchase it separately. See “Philips  
Authentic Accessories” on page 62 for details.  
Manual  
This menu allows you to display the pictures  
manually. Browse the list of pictures by pressing +  
or -. Press >to activate the graphical full-screen  
display and send it to the TV, press <to go back to  
the list. When a picture is selected, press OK or Select  
to open the rotation options (90° or 180°).  
20  
Multimedia  
 
6. Entertainment  
Press )or  
select Options >  
Exit  
To end the WAP session.  
Your mobile phone connects to the network  
according to the Access settings you have defined in  
the menu Settings > Network (see page 43). In case of  
a connection error, the screen displays "Go to menu":  
press (or LOptions to access the WAP options  
(see page 23).  
WAP  
This menu allows you to access services  
supplied with your network, such as news,  
sports, weather, etc.  
Your mobile phone may have been pre-configured. If  
not, settings can be configured "over the air", via the  
club Philips website. Connect to www.club.philips.com,  
select your country, then Mobile content > Other  
services > WAP. Note that this service isn’t available if  
your country and/or mobile doesn’t appear in the list.  
In this case, contact your operator for information.  
Homepage  
This is the link to the first WAP site you access when  
launching a WAP session. In most cases, this menu  
item is preconfigured and will connect to your  
operator’s WAP homepage. To change this default  
homepage see “Options” on page 23.  
Bookmarks  
To launch a WAP session, select Operator > WAP >  
This menu allows you to store your favourite WAP  
site addresses, rename them and access them quickly  
from the list.  
Press L Options while browsing, then select  
Bookmarks: the name and URL fields will be  
automatically filled in with the information of the  
page you are browsing.  
Homepage.  
Use +or -  
To browse the on-line pages.  
To select a highlighted item.  
Press ,or  
LSelect  
Press RBack  
To return to the previous page.  
Entertainment  
21  
 
       
Select Add bookmark and start entering the new name  
for the edit screen to appear. Press,, then proceed  
the same way to enter the URL address.  
Browser options  
To activate or deactivate the downloading of images  
attached to WAP pages.  
The Manage bookmarks menu allows you to Delete or  
Edit the selected bookmark.  
Selecting Off will speed up the global downloading  
time of the pages browsed.  
Go to URL  
Rename profile  
This menu allows you to enter a WAP site address and  
to connect directly when selecting it (a quick way to  
access WAP addresses without saving them as  
bookmarks).  
To rename the currently selected profile (start  
entering the new name for the edit screen to appear).  
Cache  
To empty an area of the phone’s memory where the  
All the addresses you enter in this menu and connect  
to at least once, will appear in a list. Select one of the  
items and press , to reconnect to the  
corresponding page, without having to re-enter its  
complete address.  
pages browsed during a WAP session are stored.  
Cookies  
To Enable the network to send you cookies or Clear  
the list of cookies you have received.  
Network  
Settings  
Homepage: to change the homepage name and  
In order to access WAP sites, you must first configure  
a WAP connection profile.  
address (start entering the new name for the edit  
screen to appear).  
Network access allows you to select one of the data  
profiles you have defined in Settings > Access  
settings (see page 43).  
Select profile  
To select one of the available profiles, then define the  
connection settings for each of them.  
Bearer allows you to select the type of network used  
All connection settings described below apply to the  
selected profile.  
by the selected profile when launching  
connection (see page 43).  
a
22  
Entertainment  
 
 
Proxy address and Proxy port allow you to define a  
gateway address and port number to be used when  
launching a WAP connection using the selected  
profile.  
Security: to display the list of installed security  
Certificates (then display its details or delete it), the  
Session info or the Current certificate.  
Options  
While browsing, press LOptions to access:  
Homepage  
Back  
To access the default homepage.  
To go back to the previously browsed  
page.  
Forward  
Refresh  
To go to the next browsed page.  
Push inbox  
To reload the currently browsed page  
from its original server.  
This menu allows you to read and manage messages  
automatically sent to you by the network and / or by  
your operator.  
Set as  
homepage  
To save the currently browsed WAP  
page as the default homepage.  
In some cases, a red "@" sign will be displayed on the  
screen to inform you that you have received a new push  
message. Press ,or LRead to read it or R  
Back to go back to idle.  
Save as...  
To save images embedded in the  
pages that are displayed in the Picture  
album.  
Exit  
To end a WAP session.  
Push messages include URL links for quick access to  
the corresponding WAP services: a single click on the  
link will connect to the WAP site for browsing or  
downloading multimedia files into your handset.  
Bookmarks  
Go to URL  
Settings  
See page 21 for description of these  
options.  
Push inbox  
If your push inbox is full, a message will advise you to  
delete some messages in WAP > Push Inbox.  
Entertainment  
23  
 
   
Brick game  
Flash  
The goal of this game is to destroy bricks by  
Allows you to set On 10 seconds or Off the camera  
hitting them with a ball. Destroying all bricks  
flash on the back of the phone.  
give you access to the next level.  
Keys used are the following:  
Java  
Your mobile phone features a Java run-time  
environment, which allows you to run Java  
applications, such as games downloaded on  
the network.  
4and 6  
To move the racket left or right.  
*and #  
To start the game by throwing the  
ball left or right.  
The first time you launch Java, a message appears to  
alert you that the installation and configuration of  
Java will take several moments. This is a one-time  
occurrence.  
0
To pause the game up to 2 min.  
(after which the screen returns to  
idle mode and the game is lost).  
In-Fusio  
Settings  
Once Java has been installed, you may then proceed  
with configuration.  
Your mobile phone comes equipped with the In-Fusio  
games engine, which allows you to download and play  
games. Access to this service depends on your  
subscription and the country in which you use your  
mobile phone.  
Auto launch  
Allows you to set the automatic launch of Java On or  
Off. When On, a Java application will be automatically  
launched immediately following installation.  
24  
Entertainment  
 
       
Network access  
Bearer To select the type of network used when  
Java applications  
1. The first time you select this menu, press L  
OK for initialization to start. This will take  
several minutes.  
launching a connection and to configure  
the corresponding settings.  
GSM or GPRS: your mobile will only  
use the GSM or the GPRS network  
for e-mail connections.  
GPRS first: your mobile will first try to  
connect to the GPRS network, then to  
the GSM network if the GPRS  
network isn’t available.  
2. Back to the JAVA window, you can either:  
- press ,to access the content of the Default  
folder, then press LMenu and Select to play  
the listed games,  
- or press LMenu, to access the options  
allowing you to create and manage new  
folders.  
3. Select Install to install on your mobile phone the  
JAVA games you have downloaded: you must  
always proceed with installation first, to be able to  
play a game.  
4. Press Exit to quit the Java application, or press  
LMenu to access the list of available options.  
Selecting the above option requires you to have both  
GSM and GPRS settings configured. See page 43 for  
details.  
Network Allows you to select one of the data  
account  
profiles you have defined in Settings >  
Network > Access settings (see page 43).  
Your mobile phone may display messages about  
"MIDlets". MIDlets are JAVA applications or games.  
DNS  
address  
Allows you to enter the DNS address of  
the external data network you want to  
connect to.  
Entertainment  
25  
 
7. WAP  
Press , or To select a highlighted item.  
LSelect  
Press RBack  
To return to the previous page.  
To end the WAP session.  
This menu allows you to access services supplied with  
your operator, such as news, sports, weather, etc.  
Press )  
or select Options  
> Exit  
Your mobile phone may have been pre-configured. If  
not, settings can be configured "over the air", via the  
club Philips website. Connect to www.club.philips.com,  
select your country, then Mobile content > Other  
services > WAP. Note that this service isn’t available if  
your country and/or mobile doesn’t appear in the list.  
In this case, contact youroperator for information.  
Your mobile phone connects to the network  
according to the Access settings you have defined in  
the menu Settings > Network (see page 22). In case of  
a connection error, the screen displays "Go to menu":  
press LOptions to access the WAP options (see  
page 23).  
Refer to “WAP” on page 21 for details on settings.  
To launch a WAP session, select this menu and press  
LSelect or OK to launch the connection.  
Use +or -  
To browse the on-line pages.  
26  
WAP  
 
   
8. Messages  
Delivery  
report  
When On, this option will inform  
you via SMS whether your own SMS  
was received or not. This feature is  
subscription dependent.  
Settings  
Auto save  
SMS  
When On, this option will  
automatically save messages sent in  
the Inbox menu.  
My dictionnary  
This feature allows you to enrich the T9 dictionary  
used for writing messages. For detailed information  
on entering with T9, please see “T9® text input” on  
page 9). Select <New> to create and store a new word,  
or <Delete all> to erase the content of the dictionnary  
at once.  
SMS centre  
Signature  
To select your default SMS centre. If  
not available on your SIM card, you  
must enter your SMS centre number  
.
When On, allows you to add a  
signature at the end of your message.  
You can Edit, Change or Save the  
signature.  
SMS  
Reply path  
When On, this option allows you to  
transmit the number of your SMS  
message centre together with the  
message. The recipient can then  
reply using your own SMS centre  
and not theirs. This speeds up the  
rate of transmission. This feature is  
subscription dependent.  
Validity  
period  
To select the length of time your  
messages are to be stored in the SMS  
centre. This is useful when the  
recipient is not connected to the  
network (and thus cannot receive  
your message immediately). This  
feature is subscription dependent.  
MMS  
This menu allows you to Activate, Modify or Rename  
one of the available MMS profiles. Your mobile  
Messages  
27  
 
   
phone may have been pre-configured. To change the  
settings, choose an MMS profile in the list and select  
Modify to access the settings described below.  
Read report  
This option can be set On or Off and  
informs you (via an SMS) when the  
status of the MMS you have sent  
has changed, i.e. if it was read or  
deleted.  
Application settings  
Retrieval  
mode  
Allows you to choose from:  
Manual: you connect manually to  
the server by selecting  
Delivery  
report  
This option can be set On or Off and  
informs you (via an SMS) of the  
status of delivery, e.g. if your MMS  
was received or rejected.  
a
notification in the Inbox, selecting  
Read to download, then Play.  
Automatic: new MMS are directly  
placed in the Inbox. Select the  
MMS and press >to play it.  
Auto save  
This option can be set On or Off and  
allows you to automatically save the  
messages sent in the Outbox menu.  
This mode is deactivated when  
roaming.  
Slide duration Allows you to select the duration  
between each slide of the MMS.  
Validity period To select how long your MMS will  
be stored on the server, from 1 hour  
to 1 week (maximum). This is  
useful when the recipient is not  
connected to the network (and thus  
cannot receive your message  
immediately).  
Hide identity  
To Always hide or Never hide your  
identity (i.e., your phone number)  
to the recipients of your MMS.  
Restrict  
To set the option On or Off. When  
advertisement On, you will receive less  
advertisement messages sent by the  
network.  
28  
Messages  
 
 
Network settings  
Network access  
Before you can consult your e-mails, you first need to  
configure your connection to the internet.  
Network  
access  
To choose a connection profile from  
the ones you have set (see “Access  
settings” on page 43).  
GSM Settings  
When you use a a GSM connection to connect to the  
Bearer  
To select the type of network used  
when launching a connection: GSM,  
GPRS or GPRS first.  
internet, your mobile phone dials a number provided  
by your operator and the data is sent and received over  
this connection, somewhat like a dial-up internet  
connection from  
parameters are described in the table below.  
a
PC. The GSM connection  
MMS center To enter the MMS address of the  
server you will connect to.  
Phone  
number  
This is the number your mobile phone  
dials to establish a connection. First  
choose ISDN (Integrated Service  
Digital Network) or Analogic and then  
enter the Phone number provided by  
your operator.  
Gateway  
address  
Gateway  
port  
To enter the IP and Port numbers of  
the server’s gateway.  
Email  
This menu allows you to Activate, Modify or Rename  
one of the available Email profiles. Your mobile  
phone may have been pre-configured. To change the  
settings, choose an Email profile in the list and select  
Modify to access the settings described below.  
Login &  
Password  
The login and password provided by  
your operator to access this service.  
Auto  
disconnect  
Enter an inactivity time-out value after  
which the phone will automatically  
end the call (if a connection was in  
progress). The value must be over 30  
seconds.  
If one of the accounts has been pre-configured, it may  
be locked, in which case it cannot be renamed.  
Messages  
29  
 
GPRS settings  
E-mail server  
If using GSM is like a dial-up internet connection, a  
GPRS connection would be the equivalent of  
broadband. GPRS (or Global Packet Radio Service) is  
a protocol for sending data rapidly using a radio  
signal.  
To configure the settings needed to connect to your e-  
mail service.  
Password The password to access your e-mail  
account.  
E-mail  
Your e-mail address.  
To configure a GPRS connection, you may need to  
provide a a user name and password, although some  
GPRS connections function without them. You will  
need to provide the APN (or Access Point Name).  
address  
SMTP  
address  
The Simple Mail Transport Protocol  
(SMTP) address. This is the server for  
your outgoing mail and is usually in a  
format like smtp.yourmail.com.  
Bearer  
This menu option allows you to choose which how to  
establish an internet connection.  
POP3  
address  
The Post Office Protocol (POP)  
address. This is the server for your  
incoming mail and is usually in a format  
like pop3.yourmail.com.  
GSM: your mobile will only use the GSM network  
for e-mail connections.  
GPRS: your mobile will only use the GPRS network  
for e-mail connections.  
GPRS first: your mobile will first try to connect to  
the GPRS network. If no GPRS network is  
available, then it will try with the GSM network.  
For these features to work, you must first have entered  
the corresponding settings.  
Login  
The login (or user name) to access your  
e-mail account.  
You must obtain the POP3 and SMTP addresses from  
your e-mail service provider.  
If you wish to use a GPRS connection to access your e-  
mail, you may need to use the SMTP server of your  
mobile service provider to send e-mails.  
30  
Messages  
 
Advanced  
Reception  
Topics  
To set the reception of cell broadcast  
messages On or Off.  
Port POP3  
The port number on the POP3  
server. This is usually port 110.  
To define the type of messages you  
want to receive. To configure a topic,  
select <New>, enter the code  
provided by your operator, and, if  
desired, associate a name. You can  
also select an existing topic in the list,  
which you can rename, change its  
code or delete.  
Port SMTP  
The port number on the SMTP  
server. This is usually port 25.  
DNS  
address  
The IP address of your Domain  
Name Server.  
SMTP  
SMTP authentication is usually set to  
authenticat. Off. Contact your provider for more  
information.  
You can enter up to 15 different  
topics in the list. To obtain the codes  
corresponding to the different topics,  
contact your operator.  
Broadcast SMS  
This menu allows you to manage the reception of  
SMS broadcasts regularly transmitted to all  
subscribers on the network. It gives you access to the  
following options:  
Create message  
District  
code  
To select the type of messages you  
want to be permanently displayed on  
the idle screen (in this case, enter the  
type in both District code and Topics  
menus).  
New Email  
If not included in your mobile phone contract, you  
will need to subscribe to an e-mail service in order to  
send and receive e-mails. In this case, all parameters  
are communicated to you by your operator.  
This menu allows you to send e-mails to one or several  
recipients at a time, including with an attachment  
Messages  
31  
 
   
such as a JPEG picture. Once received, your messages  
can be forwarded and the attachments visualised with  
the appropriate software.  
Add  
media  
Allows you to design your message.  
Enter the subject and text, then press  
,to access the next options:  
Add sound or Add graphic to attach a  
sound or a picture to your e-mail,  
Send now to send it to the selected  
recipient(s),  
If you exit the Send e-mail menu before sending your  
e-mail or if you cancel the sending while it takes place,  
the e-mail content is deleted without being stored.  
Add  
To select the recipient(s) of your e-mail,  
Modify to redesign your e-mail.  
contacts provided that you have entered e-mail  
addresses for contacts saved in your  
phone phonebook (see “Address book”  
on page 52).  
You can only attach one picture (JPEG, GIF or BMP)  
or one sound at a time. If you accept an incoming call  
while writing an e-mail, the menu is closed and the  
phone goes back to idle when you hang up.  
After you have added contacts, select one  
of them and press ,to Change the  
e-mail address, Remove it from the list.  
New SMS  
To compose and send an SMS, follow the steps  
detailed below:  
If you select a contact from the SIM  
phonebook, an edit window will allow  
you to enter an e-mail address.  
1. Select Create message > New SMS, then Enter  
phone no. or From contact list and press L  
Select or ,.  
2. Enter a number or select a contact and press ,,  
then one of the following options:  
Add  
recipient  
To add another recipient(s) from the  
contacts list, or to enter phone  
a
number. If you want to modify or  
remove a contact, select it press OK.  
32  
Messages  
 
enter a new mobile phone number or a new email  
address.  
Create  
SMS  
To design your message.  
Next you will be asked to Add media. In the MMS  
creation screen, five icons allow you to add a Picture,  
add Text, add Sound, Send the message or access the  
MMS options. Use+or-to move from one  
option to the next and press ,or Lto access the  
menu.  
1. Design your message: add a Picture, a Text and/  
or a Sound. Press>to create more slides.  
2. Access the MMS options (see below).  
3. Select Send now to send the MMS to the selected  
recipient(s).  
Pictures are chosen from the Picture album. Copyright  
protected pictures cannot be sent via MMS. Sounds  
can be chosen from the Sound Album melodies.  
The following options are available when creating  
new MMS messages:  
3. Enter your text and press OK to access the next  
options:  
Save  
To store the current message and its  
attachments in the Archive menu.  
Send now  
Add sound  
To send the current message.  
To attach a melody.  
Add graphic To attach an image or an animation.  
Input  
language  
To change the language for typing.  
You can send up to two attachments of two different  
types together with your SMS. Images and animations  
and pictures are exclusive: if you first select an  
animation and then an image, only the image will be  
taken into account and vice-versa.  
Next slide /  
Previous slide  
To move to the next/previous slide.  
Note that this option only appears  
if the MMS contains more than one  
slide.  
Copyright protected pictures and sounds cannot be  
sent by SMS.  
New MMS  
Edit subject  
To edit and change or enter the  
subject of your message.  
When you select New MMS, you are first asked to  
enter the contact to whom you wish to send the  
MMS. You can select one or more existing contacts,  
Messages  
33  
 
 
Inbox  
Delete slide  
To delete the selected page (if there  
is more than one in the message).  
Email  
Save  
as draft  
To save your message as a draft that  
you can edit, complete and send  
later on.  
This menu allows you to connect to your mailbox and  
download the e-mail headers (sender and subject  
lines) from the server. You may then choose to retrieve  
the corresponding e-mails.  
Save  
as template  
To save your message as a template,  
that you can use as a basis for other  
MMS (e.g. "Happy birthday" type  
of message.  
1. Select Open mailbox: your phone automatically  
connects to the e-mail server and downloads the  
list of e-mail headers if any (five at a time).  
2. If Next (or Previous) appears at the end (or  
beginning) of the list, other e-mail headers are  
pending: select one of the available options and  
press ,to retrieve them.  
3. Select a header, and press ,to display the  
Details. The following status icons may appear  
to each header:  
Preview MMS To preview the slide show you have  
created.  
Slide duration To change the value of slide  
duration set in Settings > Application  
settings (see page 28), and to set a  
delay between each slide.  
The e-mail size is too large (over 50 Kb), it  
cannot be downloaded.  
Once your message is completed, select Send now and  
press ,. A progress bar allows you to follow the  
sending of your message, press LCancel if you wish  
to cancel the sending. If you saved the MMS as a draft,  
it will be available in the Drafts menu. If you have sent  
the MMS, it is available in the Outbox when you have  
activated the Auto save options (see below).  
The e-mail is marked to be deleted (see  
page 35).  
4. If there is no icon next to the header, you can  
press ,and select Get mail to download the  
e-mail. Repeat this operation to download each  
e-mail corresponding to each selected header.  
34  
Messages  
 
 
If the e-mail you have received contains attachments  
(an image, a text file, or another e-mail), they are  
identified by a specific icon:  
memory to store the new picture, you must delete  
other items (images, sounds, messages, etc.) to free up  
memory to save the new picture.  
An image file may not be accepted by your mobile  
phone if it isn’t in the correct format. Images must be  
in JPEG, BMP or GIF format.  
Contains the details of the e-mail header  
(date and time, sender’s e-mail address,  
etc.), press ,to display these details.  
The optimal image size is 128 x 160 pixels (the  
dimensions of the screen). If you are transferring  
images from your home computer, you can use an  
image editing program to create images of the correct  
size.  
The text of the e-mail itself can be viewed as  
an attachment, press ,to read it (no  
advanced options in this case).  
A text file (text only, ".txt" format) is  
attached to the e-mail, press ,to read it  
(no advanced options in this case).  
5. Select an e-mail header and press ,to access  
the following options:  
The application needed to manage this  
attachment isn’t available in your phone, or  
the e-mail is too large to be uploaded.  
Add to  
names  
To add the sender’s e-mail address to your  
phonebook, even when you haven’t yet  
downloaded his e-mail.  
Another e-mail is attached to the one you  
received. Up to five e-mails can be attached,  
although there will be no advanced options.  
Select <New> to create a new contact, or  
a name in the list to add or change the  
e-mail address.  
A picture is attached to this e-mail. Select it  
in the list and press ,twice to store it in  
your phone (you can rename it if you wish).  
You must have selected the phone  
phonebook in this case; this menu item  
will NOT appear if you selected the SIM  
phonebook.  
You must download and save a picture before you can  
view it in the Picture album. If there isn’t enough  
Messages  
35  
 
Delete  
Reply  
To mark the e-mail to be deleted (select  
this option again to unmark it). When  
you exit the E-mail menu, you will be  
asked to confirm deletion of the selected  
item(s) from the e-mail server.  
Forward to  
To forward the selected message.  
Note that attachments cannot be  
forwarded.  
Call handsfree  
To call the sender of the message  
handsfree.  
To reply to the sender (whose address will  
be automatically added to the list).  
Call back  
To call the sender of the message.  
Store number  
To save the number of the sender  
if it is attached to the message.  
Forward To forward the downloaded e-mail to  
someone else. Proceed as described in.  
No. extracted  
To extract a number included in  
the message itself, if this number  
is included in double quotes  
(several numbers can be included  
and extracted). This menu is only  
visible if there is a number to  
extract.  
SMS  
Your MMS inbox lists all the Read and Unread  
SMS.To read a message, select it and press L R  
Read or ,. Press Options to access the following  
options:  
Delete  
To delete the selected message.  
Move to  
archive  
To store messages in the phone  
memory. You can then consult  
Store melody  
To save the melody that was sent  
with the SMS. This menu is only  
visible if there is a melody to  
extract.  
them in Messages  
>
SMS  
>
Archive. Moving a message to the  
archive deletes it from the Read  
SMS list.  
Reply  
To reply to the sender.  
36  
Messages  
 
 
Store graphic  
To save the graphic and/or  
animation that was sent together  
with the SMS. This menu is only  
visible if there is an image to  
extract.  
MMS details  
Delete  
To display the details of the  
selected message (size, date, etc.).  
To delete the selected MMS.  
Once you have opened an MMS, press LOptions  
to access the following:  
MMS  
Play message  
To switch back to automatic  
mode: the MMS is then played as  
a continuous slide show.  
If someone sends you an MMS, an icon and a sound  
alert will inform. If the sender of the message has  
asked for a Read report, a prompt will ask you to send  
it or not. Once the MMS is downloaded, it is available  
in the Inbox.  
Next / previous To move to the next or previous  
slide  
slide. You can also press<or  
>when viewing the MMS in  
manual mode. Note that this  
option only appears if the MMS  
contains more than one slide.  
If the size of the MMS to download is bigger than the  
memory available in your phone, you must free  
memory by deleting data (picture, sounds, etc.). See  
“Memory status” on page 17.  
Save picture  
Save sound  
To detach the picture of the  
current slide and save it in the  
Picture album.  
Your MMS inbox lists all the Read and Unread MMS,  
Notifications, Delivery and Read reports. To read a  
message, select it and press >. Press ,or L  
Options to access the following options:  
To detach the sound of the  
current slide (if  
attached) and save it in the Sound  
album.  
a
sound is  
Play message  
To switch back to automatic  
mode: the MMS is then played as  
a continuous slide show.  
Close  
To close the MMS and go back to  
the list of options.  
Forward  
To forward the selected MMS to  
someone else.  
Messages  
37  
 
them directly from this menu prevents you from  
typing them from scratch.  
Do NOT delete notifications before you have retrieved  
the MMS, or you will not be able to retrieve the MMS.  
Notifications are automatically deleted once you have  
received the full MMS.  
Outbox  
MMS outbox  
Drafts  
Lists the MMS you have Sent or created but Not sent  
yet. You can Play, Delete or view the Details of all these  
messages, Send or Forward them to someone.  
Lists all messages MMS and SMS saved as drafts, or  
automatically saved if you quit the MMS or SMS  
menu before saving or sending your message. You can  
Play, Edit, Send, view Details and Delete drafts.  
Messages you have saved can only be sent from the  
Draft or Outbox folders. You can NOT recover an item  
(whether message, notification or report) that you  
have deleted. Press RBack to cancel deletion.  
Templates  
MMS  
SMS outbox  
Lists all messages saved as templates. You can Play, Edit  
Lists the SMS that were saved, whether they were sent  
or not. You can Delete or Forward any of the messages  
listed in this folder, or Edit the selected message to  
send it to someone else. At the end of the list, the  
<Delete All> item allows you to delete all the messages  
at once. Deleting old messages is useful to free  
memory space in order to receive new messages.  
and Delete them.  
SMS  
Lists all messages that are pre-configured, such as "I’m  
waiting for you" or "Please call me back". Selecting  
38  
Messages  
 
Date format  
Allows you to select and activate one of the available  
date formats, whether Western or Thai.  
9. Settings  
Own time zone  
This menu allows you to change the settings related to  
each available option (sounds, time and date, security,  
etc.) and to customise your phone.  
Allows you to select your current time zone. When  
you enter the menu, you are presented with a map of  
the world that which you can navigate with the up and  
down navigation keys. Each time zone is identified  
according to its position relative to Greenwich Mean  
Time (GMT) and by the main cities within that time  
zone.  
Time and date  
Summer time  
Allows you to set the daylight saving to On (in  
summer time) or Off (in winter time). If daylight  
saving is On and you set the time to 12:00, it will  
automatically switch to 11:00 when turning the  
option to Off.  
Autonomy  
This menu gives you a direct access to the features that  
consume the most energy and allows you to improve  
your battery life by quickly changing each setting.  
Set time  
Allows you to set the time using the keypad or with  
the navigation keys.  
You should select your Time zone and activate  
Daylight savings (if appropriate) before setting the  
time.  
Deactivating most of the functions in the Autonomy  
menu increases battery life.  
Security  
This menu allows you access the features  
relating to the security of your mobile phone  
and the data you store there.  
Set date  
Allows you to set the date by pressing the appropriate  
numeric keys or the navigation keys.  
Settings  
39  
 
           
Change codes  
In all cases, the keypad is automatically unlocked  
when you receive a call.  
Allows you to change your PIN and PIN 2 codes, as  
well as the call Barring code. Depending on your SIM  
card, some features or options may require a PIN2  
secret code given to you by your operator.  
Public names  
Allows you to manage a specific names list called  
Public Names list, and restrict calls to this list via the  
Call restriction option.  
If you enter a wrong PIN2 code 3 times, your SIM  
card is blocked. To unblock it, request the PUK2 code  
from your operator or retailer. If you enter an  
incorrect PUK code 10 times in a row, the SIM card  
will be blocked and unusable. If this happens, contact  
your operator or retailer.  
This feature is subscription dependent and requires a  
PIN2 code (see page 42).  
Public names  
Allows you to consult, edit and  
modify your Public Names list via a  
PIN2 code.  
PIN protection  
This allows you to set the PIN protection On or Off.  
When On, you will be asked to enter your PIN code  
when switching your phone on.  
Call  
restriction  
Allows you to restrict the calls to the  
Public names list when Public only is  
selected.  
This feature is subscription  
dependent and requires a PIN2  
code (see page 42). This option  
might also apply to WAP and  
e-mail connections over GPRS.  
You cannot change your PIN code if this option is Off  
.
Keypad lock  
To set your keypad Off, or to select an immediate or  
delayed lock. When selecting one of the delayed  
options, and if you temporarily unlock your keypad  
Call barring  
by pressing the  
#
key, it will be automatically  
Allows you to limit the use of your phone to specific  
calls. This can be applied to Incoming calls (All calls or  
When roaming) and/or to Outgoing calls (All calls,  
locked again according to the delay you selected.  
40  
Settings  
 
International calls and Intl. Exc. Home). In both cases,  
the Cancel option applies to all calls at once. The  
Status option allows you to know whether a type of  
call is barred or not.  
pressing the same key deactivates it and returns you to  
your Personal settings. For more information, see  
“Hotkeys” on page 45.  
The information that appears in the Personal field  
will depend on how your mobile phone has been  
configured.  
This feature is network dependent and requires a  
specific call barring password supplied by your service  
provider.  
Sounds  
Information privacy  
Ringer volume  
Allows you to protect, with a code of your choice,  
your Messages, Contacts or Call info and prevent them  
from being read by someone else using your phone.  
This option allows you to adjust the volume  
of your ringer. Press  
volume of your ringer from Silent to  
Increasing.  
+or-to adjust the  
Profiles  
Ringtone  
A profile is a group of predefined settings that  
allow you to quickly adapt your phone to  
your environment. Selecting Meeting, for  
example, will set your ringer volume to silent, activate  
the vibrating alert and deactivate the key tones (the  
other items are set according to your Personal  
settings). When your meeting is over, selecting  
Personal will reactivate all your usual settings. The  
details of each profile are displayed when selecting a  
profile.  
Allows you to select a ringer tone. The list also  
includes recorded sounds and melodies you saved.  
Scroll through the list and wait to hear the selected  
melody being played.  
Messages ringer  
Allows you to set On or Off an alert for each time you  
receive a new message. When On, you can select the  
alert of your choice from the ringers list.  
Equaliser  
This option allows you to choose from different audio  
settings. It is only available while a call is in progress.  
You can also associate a hotkey with a profile (e.g.,  
long press key  
3
to activate Outdoors). Long  
Settings  
41  
 
   
Scroll through the list and wait a few seconds to hear  
the difference.  
Vibra alert  
Allows you to set the vibra alert On or Off when  
receiving a call, when an event set in the organiser is  
due, when you receive a message and when the alarm  
rings.  
Auto switch on & off sound  
Allows you to set On or Off the sounds of your mobile  
phone when you switch it on or off.  
The vibra alert is always Off when you connect the  
charger or the Cigarette Lighter Adapter.  
Key tones  
Allows you to switch the key tones On or Off.  
Silent  
Sounds alerts  
When this mode is On, all sounds and alerts are  
deactivated and the vibra alert is active.  
Allows you to set alert sounds for the following items:  
Organiser: when an event programmed in your  
organiser is due,  
The Silent mode also applies to key tones.  
Missed call, when you missed an incoming call,  
Battery alert: when the battery is running low and  
requires charging,  
Minute alert for a beep alert that sounds every  
minute during a call to help you manage the  
duration of your call (the beep cannot be heard by  
the caller).  
Display  
This menu allows you to configure how the  
menus are displayed on screen.  
Wallpaper  
Allows you to set the wallpaper of the main screen On  
or Off. The wallpaper is not displayed in idle when the  
World clock option is On (see on page 12).  
Select or deselect the item(s) of your choice by  
pressing  
<or >.  
This menu only allows you to set the alert sounds On  
or Off, NOT the alerts themselves. E.g. setting the  
Organiser alert Off will not prevent your phone from  
displaying the Reminder screen (if you programmed  
one), but the corresponding sound will not be played.  
Contrast  
Allows you to choose from different levels of contrast.  
42  
Settings  
 
       
4. Then select the Display period and press  
,. The  
Screen saver  
Allows you to set the Screen saver On or Off. When  
On, it will run a slide show in idle mode, by using the  
jpeg file(s) you have stored in your phone and  
selected.  
timing you have set will be applied between each  
picture of the slideshow.  
Backlight  
Backlight is activated when receiving incoming calls  
or messages, browsing menus, etc. Select one of the  
available values.  
Settings the Screen saver Off automatically activates  
the Economy mode, i.e., the current time displayed on  
a
white background. This mode increases the  
Backlight intensity  
Allows you to choose from different levels of backlight  
intensity.  
autonomy of your phone (increases your battery life).  
1. When setting the Screen saver On, select a  
picture in the list that appears by pressing  
(you deselect it also by pressing these keys),  
then press to move to the next picture.  
2. Once you selected the pictures of your choice,  
press to activate the screen saver.  
<or  
Network  
>
Contact your phone operator to have full  
information about GPRS availability over its  
network and for an appropriate subscription.  
-
,
You might also need to configure your phone with the  
GPRS settings supplied by your operator, by using the  
menus described in this section. Then select the bearer  
(GSM or GPRS) in the menus of each application to  
be used (e.g. WAP, MMS, e-mail, etc.).  
You must select several pictures (up to 10) in order to  
display a slide show. When selecting only one picture  
to be used as a screen saver, only this picture will be  
displayed.  
3. Select Start delay and press  
+
or  
-
to choose  
Access settings  
a value. When in idle mode, the screen saver will  
start according to the time limit you have set.  
This menu allows you to create different data profiles  
that can be used for connecting to various services: for  
example, when using WAP or when sending MMS,  
Settings  
43  
 
   
the selected profile will be used to connect to the  
GSM or GPRS network.  
GPRS settings  
To change the GPRS settings:  
Login, Password, Inactivity time  
• the APN menu allows you to  
enter the address of the external  
data network you want to  
connect to, a text string used to  
establish the connection.  
Options described below are operator and/or  
subscription dependent. Error messages during  
connections are mainly due to incorrect parameters:  
contact your operator before first use, in order to have  
the appropriate settings, which you may receive by  
SMS in some cases. Some pre-configured profiles  
might be locked, preventing re-programming and  
renaming.  
GPRS attach  
This menu allows you to define how your mobile  
phone connects to the GPRS service.  
Select an item in the list and press  
,to access the  
following options:  
Always on  
Your phone automatically connects  
to the GPRS service (if available).  
This option allows quicker access  
to GPRS features, but increases  
energy consumption.  
Change name  
Show  
To rename the selected profile.  
To display all parameters of the  
selected profile.  
GSM Settings  
To change the GSM settings:  
Login & Password,  
Phone number needed to  
establish the connection and  
provided by your operator  
(ISDN or Analogue),  
For data calls  
Your phone will connect to the  
GPRS service only when required.  
This option reduces energy  
consumption, but increases the  
connection delay.  
Register again  
Inactivity time, a value of over 30  
seconds after which the phone  
disconnects automatically (if a  
connection was in progress).  
Provides you with a list of the networks available in  
the area when the Manual mode is selected. Select the  
44  
Settings  
 
network you want to register with and press  
confirm.  
,
to  
Depending on your service provider, other hotkeys  
may be predefined and locked.  
Preferred list  
1. In the list, select a key from  
2
to  
9
and  
Allows you to build a network list in order of  
preference. Once defined, the phone will try to  
register on the network, according to your  
preferences.  
press OK. If the key was already programmed,  
select Change.  
2. Browse the list to select the function you wish to  
associate with this key and press  
Select. If you select Flash dial, you will be  
asked to select a contact in the contacts list.  
,
or  
L
Shortcuts  
This feature allows you to configure shortcuts  
to the features and options you access most  
frequently.  
3. To use a hotkey, press and hold the programmed  
key when in idle mode.  
Voice command  
Allows you to set up a direct access to a specific  
function by linking it to a voice tag.  
Hotkeys  
Allows you to set up direct access to a specific function  
or a contact by linking it to a key. A long press on the  
key in idle mode will then automatically activate the  
function or call the associated number (Flash dial).  
A number of Hotkeys have been preconfigured, e.g.  
You can associate a voice command to most functions  
supported by the hotkeys.  
1. Select <New>, then browse the list to select a  
6
from  
for Silence, but you can reprogram them (keys  
to only). The following keys are locked:  
function and press  
2. When Press OK and speak appears, record your  
voice tag. Make sure you are in quiet  
,or LSelect.  
2
9
a
1
*
#
Call voice mailbox.  
environment, choose a short and simple word  
and clearly pronounce it.  
Dial international call.  
Change language used.  
Settings  
45  
 
       
3. The next menu gives you access to Delete, Play,  
To use the voice dial, press and hold ,when in idle  
Change function and Change voice options. Press  
mode, then say the voice tag corresponding to the  
number you want to dial.  
R
Back to create another voice tag.  
To use the voice command, press and hold  
in idle mode, then say the recorded voice tag.  
To reprogram a voice command: select it, press  
OK and select Change function. This will bring you  
,
when  
Up to 15 voice tags can be defined and shared between  
voice dial and voice command. Recorded voice tags are  
available in their respective menu and can be deleted,  
played or changed.  
L
to the list of available functions.  
Quick Call  
Voice dial  
This feature allows you to set your four preferred or  
most frequently dialled numbers. You can then  
quickly call one of them by selecting the  
corresponding icon or picture on the screen, thereby  
removing the need to enter and browse the Contacts  
list. See “Quickcall” on page 6 for details.  
Allows you to set a voice tag that will dial the default  
number for the corresponding contact simply by  
saying the voice tag. To set up voice dial, proceed as  
follows:  
1. Select <New>, then a contact in the list, then  
press  
,or LOptions.  
When the phonebook in phone is selected, choose the  
number of your choice in the list that is displayed.  
Language  
This menu allows you to select a language for  
2. When Add voice tag? appears, follow the  
all menu texts. Use  
list and select a language by pressing  
Select.  
+or  
-
to browse the  
instructions displayed on the screen.  
,
or  
L
46  
Settings  
 
   
The table below details the operations of the various  
keys in camera mode.  
10. Camera  
+ -  
Zoom in / out.  
< >  
Increase/decrease exposure  
compensation.  
Your mobile phone features a built-in digital camera.  
You can take pictures, store them in your phone or  
transfer them to your PC via Infrared, use them as  
wallpaper or send them to your friends via MMS or  
Email.  
)or  
Exit Camera mode and return to  
home screen.  
,
Take a picture.  
0
*
5
#
Activate/deactivate the self-timer.  
Activate/deactivate the burst mode.  
Activate/deactivate the camera flash.  
How to...  
This section describes how to perform the most  
common operations with your camera.  
Toggle through the image  
resolutions.  
Activate the camera  
To activate the camera mode, simply press R  
Camera: the camera application is automatically  
launched.  
L
Access the Options menu.  
R
Return to previous screen.  
After a period of inactivity, the camera automatically  
exits.  
Take a picture  
1. Frame your picture and press ,to take the  
picture.  
When the camera is active, the preview screen is  
displayed. Note that the lens is preset and focus-free.  
2. Once the picture is taken, a view screen is  
displayed. Press  
to ignore the picture, ,  
to save it or press  
to access the following  
options (see “Camera menu” below for details).  
:
Camera  
47  
 
   
2. Adjust your picture, and press OK to start the  
countdown of 10 seconds (this value cannot be  
changed).  
Store  
To save the picture in your personal  
photos folder using the default numbering  
(you can then rename it from the folder  
itself).  
Press  
lto stop the timer and go back to preview  
mode.  
Send  
by...  
To send the picture by MMS, E-mail or  
Infrared.  
3. A sound is played three seconds before the  
picture is taken, then again when it’s actually  
shot.  
Modify To save the picture and modify it (see  
picture “Picture album” on page 18).  
MMS Foto talk  
Discard To ignore the picture and go back to  
This feature allows you to send a picture via MMS  
and to add a sound recording to it. The picture can be  
selected from the Picture album or can be a picture you  
have just taken with the camera.  
preview mode.  
If there is no action before the view screen time-out,  
the picture is automatically saved.  
1. Take a picture, then press Menu, or select a  
picture from the Picture Album, then press ,or  
LOptions. In both cases, select Send by... >  
MMS.  
2. When the Add sound? message appears, press  
LYes to start recording. Then press LSave  
to stop and save your recording, or RCancel.  
3. Select a contact in the list that appears and then  
Add media to go to the MMS creation screen.  
Press LSend to send your message, or modify  
it as you want before sending it (see “New  
MMS” on page 33 for more information).  
Pictures are named with the date of the shot, e.g.  
"0410_154157.jpg" for a picture taken on October 4,  
at 15: 41:57.  
The number of pictures you can save varies according  
to the settings: the higher the resolution, the bigger  
the file size. A message will warn you if there isn’t  
enough memory left. In this case, you must delete data  
before storing a new picture.  
Using the self-timer  
1. In Camera mode, press 0.  
48  
Camera  
 
Camera menu  
This section describes in detail the Camera menu  
options when pressing LMenu when in preview  
mode, before taking a picture.  
Properties Choosing this option displays the  
following properties of the selected  
image: Name, Size (in Kb), Resolution  
and Format.  
Rotate  
This option allows you to rotate an  
image; The options are: - 90 degrees,  
+ 90 degrees, + 180 degrees. Changes  
are automatically applied.  
My photos  
When you take a picture and save it, the file is stored  
in your My photos folder. When you open the menu,  
your photos are displayed as thumbnails. Use the up  
and down navigation keys to move through the list.  
To view the image full-screen, press OK. Use the up  
and down navigation keys to move through the list of  
images. Press LOptions to access the following:  
Rename  
Delete /  
Use this option to rename an image file.  
Use this option to delete some or all the  
Delete all files in your My photos folder.  
Slide show  
View  
To display the picture in full screen.  
Selecting this option will launch a slide show of the  
contents of the My photos folder. During the slide  
show, each photo will be displayed briefly on the  
screen. Press any key to end the slide show and return  
to the previous screen.  
Send by... Use this menu to transfer an image to  
another device. The options are: MMS,  
Email and Infrared.  
Set as  
To set the selected photo as the image  
wallpaper to be displayed in the background of  
Continuous shoot  
your screen.  
This option can be set On or Off. When On, it allows  
you to take a "burst" of 9 photos with one press of the  
button. Note that to use this mode, the resolution  
must be set to Screensize (for more information, see  
“Settings” on page 51).  
Modify  
picture  
This option launches the image editing  
program. See “Picture album” on  
page 18 for details.  
Camera  
49  
 
 
When the camera is finished processing the images,  
they are displayed on screen as thumbnails. You may  
then press LOptions to access the options described  
below.  
Frames  
This feature allows you to take photos with decorative  
frames. The Standard frames folder contains frames  
that were loaded on your mobile phone when you  
purchased it. Note that to use this option, the  
resolution must be set to Screensize (for more  
information, see “Settings” on page 51).  
Save  
To save the selected image.  
Save all  
To save all the images in the group.  
Colour mode  
Send by... To send the selected image by MMS,  
The Colour mode feature allows you to apply a  
number of different visual effects to your images. The  
Email, or Infrared.  
Delete  
To delete the selected image.  
options are: None, Embossed, Black  
&
White,  
Negative, Sepia, Digital, Edge and Edge 2.  
Delete all  
To delete all the images in the group.  
Night mode  
When activated, this feature allows you to take  
pictures in low-light situations.  
When you save or delete an image from the group, it  
is removed from the thumbnail view and stored in the  
My photos folder.  
Self-Timer  
Picture orientation  
This feature allows you to take a time-delayed picture  
so that you can get into the frame as well. To use the  
Self-Timer, select On in this menu, return to the view-  
finder mode, frame your picture, and then press OK.  
This feature allows you to choose how photos are  
displayed in your photo album so that they can be  
viewed correctly. The options are: Landscape &  
Portrait.  
Brightness  
Flash  
Use this menu option to adjust the exposure  
compensation of your mobile phone’s screen.  
This feature allows you to set the Flash On or Off. You  
can also long press the 5key.  
50  
Camera  
 
Settings  
Reset  
settings  
To reset all camera settings to their  
default values. warning message  
appears: Do you really want to reset all  
A
Resolution Use this menu option to choose the size  
of the photos you take. The options are:  
• VGA (640 x 480)  
parameters? Choose Yes or No.  
• Medium (320 x 240)  
• Screensize (128 x 160)  
Help  
This menu option provides you with on-screen help  
in taking pictures with your mobile phone.  
Please note that the higher the  
resolution, the larger the file size.  
Picture  
quality  
This menu allows you to adjust the  
quality of the pictures taken with your  
camera: Low, Medium, High.  
The lower the quality, the smaller will  
be the resulting image files, thereby  
allowing you to store more photos on  
your mobile phone.  
Camera  
51  
 
     
Contacts added to the selected phonebook can then  
be copied into the other, via the Copy to SIM or Copy  
to phone options.  
11. Address book  
Your mobile phone only manages one phonebook at a  
time and will ignore the information relative to the  
other one, e.g. if "Smith" is present in both  
phonebooks and if you delete it in the phone, it  
remains unchanged in the SIM.  
Contacts are stored in one of the two available  
phonebooks: in your SIM card (number of entries  
depending on capacity) or in your phone (up to 999  
names). When entering new names, they will only be  
added to the phonebook you have selected.  
Delete all  
Copy to phone  
To delete all contacts at once. This option only  
applies to the onboard phonebook, not to the SIM  
phonebook.  
This option will copy the content of your SIM card  
into your phone. If you cancelled or aborted the  
automatic copy of your SIM phonebook when you  
first switch on your phone, you can do it manually  
with this option.  
QuickCall  
To access the QuickCall feature, which allows you to  
set your four most frequently dialled numbers. See  
“Quickcall” on page 6 for details.  
Selecting this option twice will duplicate all the  
names.  
Contacts select  
Names list  
This menu allows you to select the phonebook to use,  
This menu allows you to search for a name, then edit  
and manage the related information (telephone  
numbers, e-mail addresses, etc.). It gives you access to  
the same fields as when selecting a name from the  
home screen.  
either In SIM or In phone. Press  
+
or  
-
to select  
a phonebook, then press LSelect or ,OK.  
52  
Download from Www.Somanuals.com. All Manuals Search And DownloaAd.ddress book  
             
The number of the selected contact will appear in a  
highlighted line, at the bottom of the screen. To  
search for a given name:  
field to another (the information of the selected field  
will appear, highlighted in the bottom of the screen).  
Press OK or Options to access the following options:  
Change name SSend SMS  
Send by  
infrared  
Delete  
1to 9 Press the key for the letter that you  
Show  
Call  
Send MMS  
Select picture  
and #  
want to go to in the list (e.g. press  
8twice to access the letter "U").  
The first record starting with this  
letter is selected in the list.  
Call handsfree Select melody  
Select Show to access the list of numbers or fields saved  
for this contact. Select <New> to create a new field or  
select one of the number and press ,to access a  
second set of options. Change, Call, Call handsfree  
Send SMS, Send MMS and Delete are the same options  
as the ones listed above. You will find in addition:  
#or  
<Search...>  
Press this key or select this option,  
then enter the first letters of the  
name you are searching, and press  
OK to go directly to that name.  
In the SIM phonebook  
Choose a contact in your SIM phonebook and press  
or Options to access the following options:  
Change  
To change the number of the selected  
field.  
Show  
To display the details of the selected  
field.  
Change  
Details  
Call  
Send MMS  
Send SMS  
Voice dial  
Flash dial  
Copy to phone  
Delete  
Copy to  
SIM card  
To copy a contact of your phone  
phonebook into the SIM phonebook  
(it is then always updated when  
switching phonebooks or when using  
another phone).  
Call handsfree  
In the onboard phonebook  
Choose a contact of your phone phonebook. When  
the selected name features several numbers or fields  
(see below), simply press <or >to go from a  
Address book  
53  
 
1. Select a contact and press OK or LOptions.  
2. In the list, choose Select picture to add a picture  
from the Picture album and choose Select  
melody to open the list of ringers and add a  
melody.  
Voice dial  
Flash dial  
To set a voice tag that will call the  
contact when pronounced (see  
page 46).  
To set a direct access to this contact by  
linking to a key (see page 45).  
The picture associated with a contact is also used for  
the Quickcall feature.When you change it, it is also  
updated in the Quickcall settings.  
Make  
default  
The first number you enter becomes  
the default number which is  
automatically dialled when pressing  
(. This option allows you to set  
another default number.  
Own numbers  
The Own numbers item that appears in the contacts  
list allows you to store your own phone number. We  
advise that you enter your mobile number as well as  
any other relevant information.  
Change  
type  
To change or to define the field type of  
the selected number.  
Alphanumeric fields (note and e-mail) can only be  
changed or deleted.  
Although all its fields can be empty, the Own numbers  
item cannot be deleted.  
Personalizing your contacts  
Emergency number  
Contacts stored in the phone phonebook can be  
personalised with a picture and/or a sound, so that  
when the person calls, the picture and/or sound  
associated with his name will be displayed/played.  
The emergency number will call the emergency  
services number in your country. In most cases, you  
can call this number even if you haven’t yet inserted a  
SIM card or entered your PIN.  
This function is only available when you select the  
onboard phonebook.  
In Europe the standard emergency number is 112, in  
the UK it is 999.  
54  
Download from Www.Somanuals.com. All Manuals Search And DownloaAd.ddress book  
 
"+" sign and alphanumeric fields (e-mail and  
note) feature up to 50 latin characters. Each  
contact can feature a maximum of 5 numeric  
fields (e.g. 2 mobile numbers, 3 work numbers,  
an e-mail address and a text note).  
Add a contact  
To the SIM phonebook  
1. Select Add a contact, then press LSelect or  
,OK.  
4. Enter the relevant number or text and press OK.  
5. To personalise this contact, see “Personalizing  
your contacts” on page 54.  
2. Enter the name and press LOK.  
3. Enter the relevant number, then select the type of  
number allocated to the name (Phone, Fax or  
Data) and press OK to store this name in your  
phonebook.  
Service numbers  
A number is limited to 40 digits, depending on your  
SIM card. Entering international prefix, country and  
area codes allows you to dial a number from any  
location.  
Subscription and operator-dependent.  
This menu allows you to call various voice servers  
including consumer services, get some information,  
subscribe to mailing lists, etc. The services available  
may vary according to your subscription.  
In the phone phonebook  
1. Select Add a contact, then press LSelect or  
,OK.  
2. Enter the last, then first name (up to 20 latin  
characters); one of the two fields can be empty,  
but not both.  
Status  
Select this menu to display the total number of  
contacts you have saved in each phonebook, out of the  
total number available.  
3. Then select the number type or field type.  
Numeric fields can hold up to 40 digits and one  
Address book  
55  
 
     
12. Call Info  
PC session  
This option will display the last  
connection session or transfer  
volume of your PC transmission.  
The call counters managed by your mobile phone  
might differ from the ones used by your operator. You  
should therefore consider the call counters displayed  
on the screen as informative items, but NOT as the  
actual charge rate basis.  
The menus described in this section are used for  
managing how your mobile phone handles calls and  
their related costs.  
Counters  
This menu allows you to track the cost and  
duration of your calls. Most options  
GSM counters  
This feature is used for keeping track of your  
incoming and outgoing GSM calls.  
mentioned  
below  
are  
subscription  
dependent.  
Last  
info  
call To display the duration and/or cost of  
GPRS counters  
your last call.  
The GPRS counter allows you to monitor the amount  
of data received via GPRS sessions. This feature is  
subscription and network dependent. It gives you  
access to the following options:  
Total  
duration  
To Show or Reset the time duration of  
Outgoing or Incoming calls.  
Total cost  
To display the accumulated cost and  
to set the counter to zero (may be  
protected by PIN/PIN2 codes).  
Show how much has been spent  
based on the Charge rate.  
Mobile  
session  
This option will display the last  
connection session or transfer  
volume of your mobile phone (e.g.  
after  
a
WAP connection over  
Reset the current total cost.  
GPRS).  
56  
Call Info  
 
   
Call waiting  
Show balance to check the  
remaining credit (based on the  
Cost limit).  
With GSM Applies to All calls, Voice calls, Fax calls  
call  
and Data calls. When this option is  
active, you hear a beep if someone tries  
to call you while already on a call.  
Select the Status option to find out  
whether the GSM call waiting is active  
or not.  
Cancel cost limit  
Cost limit to enter the cost limit  
used in the Show balance menu.  
Charge rate to set the rate per  
unit. First enter the currency used  
(3 characters maximum), then  
enter the cost per unit.  
WithGPRS Allows you to set On or Off the call  
call  
waiting for voice incoming calls while  
a GPRS connection is ongoing.  
Settings  
Caller ID  
This menu allows you to set all the options related to  
calling: call forwarding, call waiting, etc.  
To Show or Hide your identity (i.e., your phone  
number) to your correspondent. The Status will  
inform you on which option is activated.  
Info at call end  
To set On or Off the systematic display of the length  
and/or cost of each call when hanging up.  
Call forward  
To divert incoming calls to your mailbox or to a  
number (whether in your contacts or not) and applies  
to: Data calls, Voice calls and Fax calls.  
Any key answer  
When On, this options allows you to accept a call by  
pressing any key, except )(used to reject a call).  
Unconditional Will divert all the incoming calls. If  
you select this option, you will not  
receive any calls until you deactivate  
it.  
Call Info  
57  
 
       
successful connection is made or until the maximum  
number of attempts is reached (10). The phone beeps  
at the beginning of each attempt and emits a special  
beep if the connection is successful. The time between  
redials increases with each attempt.  
Conditional  
Status  
Allows you to choose when you  
want to divert incoming calls: If no  
reply, If not reachable or If busy.  
Each  
option  
can  
be  
set  
independently.  
Will display the status of all call  
forwarding.  
Call list  
This menu provides you with the list of All calls,  
Missed calls, Received calls and Outgoing calls. They  
are displayed in chronological order with the most  
recent on top. If the correspondent is listed stored in  
your contacts, the corresponding name is displayed.  
Select a number in the list, and press (to redial the  
number or press OK or LOptions to access the  
options: Details, Call or Call handsfree this  
correspondent, Send SMS, Send MMS, Delete the  
selected call or Store the associated number (if not  
already in your phonebook).  
Before activating this option, you must enter your  
voice mailbox number (see next section). This feature  
is subscription dependent, and different from the call  
transfer, which takes place when one/several calls are  
in progress.  
Mailboxes  
To enter your voice mailbox numbers (if not available  
on your SIM card).  
In some cases, you might have to enter two numbers:  
one to listen to your mailbox, the other one to forward  
calls. Contact your operator for more information.  
Reset  
To reset the whole list at once and delete all listed  
calls.  
Auto redial  
When On, if the person you are calling is busy, your  
phone will automatically redial the number until a  
58  
Call Info  
 
 
SMS full - Memory for messages is full. Delete  
Icons & symbols  
old messages to receive new ones.  
In idle mode, several symbols can be displayed  
simultaneously on the main screen.  
Call Forward Unconditional to number - All  
your incoming voice calls are being forwarded  
to a number other than voice mail.  
If the network symbol isn’t displayed, the network is  
not currently available. You may be in a bad reception  
area, moving to a different location may help.  
Call Forward to voice mailbox - All your calls  
are being forwarded to voice mail.  
Home zone - A zone designated by your net-  
work operator. Subscription dependent, con-  
tact your service provider for details.  
Silent  
-
Your phone will not ring when  
receiving a call.  
Vibra - Your phone will vibrate when receiving  
a call.  
GSM Network: your phone is connected to a  
GSM network.  
Reception quality: the more bars are shown  
the better the reception is.  
GPRS attach - Your phone is connected to the  
GPRS network.  
SMS message - You have received a new  
SMS Chat - option is set to On  
.
message.  
Memory full - The phone’s memory is full. De-  
lete items to store new ones.  
Voice mail - You have received a new voice  
mail.  
MMS message - You have received a new mul-  
timedia message.  
Battery - The bars indicate the battery level  
(4 bars = full, 1 bar = low).  
Wap message - You have received a message  
in the wap push inbox.  
Alarm clock activated.  
Auto witch on/off - option is set to On.  
Roaming - Displayed when your phone is reg-  
istered to a network other than your own (espe-  
cially when you’re abroad).  
60  
Download from Www.Somanuals.com. All Manuals Search And DownIlocoadn.s & symbols  
 
place if your mobile has an external antenna, or  
contact your network operator for assistance/  
information.  
Troubleshooting  
The phone does not switch on  
Remove/reinstall the battery. Then charge the phone  
until the battery icon stops scrolling. Unplug from  
charger and try to switch the mobile on.  
The display doesn’t respond (or the display  
responds slowly) to key presses  
The display responds more slowly at very low  
temperatures. This is normal and does not affect the  
operation of the phone. Take the phone to a warmer  
place and try again. In other cases please contact your  
phone supplier.  
The display shows BLOCKED when you  
switch on  
Somebody tried to use your phone but didn’t know  
the PIN code nor the unblocking code (PUK).  
Contact your service provider.  
Your battery seems to over heat  
You might be using a charger that was not intended  
for your phone. Make sure you always use the Philips  
authentic accessory shipped with your phone.  
The display shows IMSI failure  
This problem is related to your subscription. Contact  
your operator.  
Your phone doesn’t return to the idle  
screen  
Your phone doesn’t display the phone  
numbers of incoming calls  
Long press the hangup key or switch off the phone,  
check that the SIM card and the battery are installed  
correctly and switch it on again.  
This feature is network and subscription dependent.  
If the network doesn’t send the caller’s number, the  
phone will display Call 1 or Withheld instead. Contact  
your operator for detailed information on this subject.  
The network symbol is not displayed  
The network connection is lost. Either you are in a  
radio shadow (in a tunnel or between tall buildings) or  
you are outside the network coverage area. Try from  
another place, try to reconnect to the network  
(especially when abroad), check that the antenna is in  
You can’t send text messages  
Some networks don’t allow message exchanges with  
other networks. First check that you entered the  
number of your SMS centre, or contact your operator  
for detailed information on this subject.  
67  
 
 
You can’t receive and/or store pictures  
A picture may not be accepted by your mobile phone  
if it is too large, if its name is too long, or if it doesn’t  
have the correct file format.  
The display shows INSERT YOUR SIM CARD  
Check that the SIM card has been inserted in the right  
position. If the problem remains, your SIM card  
might be damaged. Contact your operator.  
You have the feeling that you miss some calls  
Check your call divert options.  
The autonomy of your phone seems lower that  
indicated in the user guide  
The autonomy is linked to your settings (e.g., ringer  
volume, backlight duration) and the features you use.  
To increase the autonomy, and whenever possible,  
you must deactivate features you do not use.  
During battery charge, the battery icon shows  
no bar and the outline is flashing  
Only charge the battery in an environment where the  
temperature does not go below 0°C (32°F) or above  
50°C (113°F).  
Your phone doesn’t work well in your car  
A car contains many metallic parts that absorb  
electromagnetic waves which can affect the phone’s  
performances. A car kit is available to provide you  
with an external antenna and enables you to make and  
receive phone calls without handling the handset.  
In other cases please contact your phone supplier.  
The display shows SIM failure  
Check that the SIM card has been inserted in the right  
position. If the problem remains, your SIM card may  
be damaged. Contact your operator.  
Check with local authorities if you are allowed to use  
the phone whilst driving.  
When attempting to use a feature in the  
menu, the mobile displays NOT ALLOWED  
Some features are network dependent. They are only  
available, therefore, if the network or your  
subscription supports them. Contact your operator  
for detailed information on this subject.  
Your phone is not charging  
If your battery is completely flat, it might take several  
minutes of pre-charge (up to 5 minutes in some cases)  
before the charging icon is displayed on the screen.  
68  
 
communication between your phone and your  
computer. The provided software allows you to  
download pictures and melodies and to synchronise  
your contacts and appointments.  
Philips Authentic  
Accessories  
Some accessories, such as a battery and a charger, are  
included as standard in the package of your mobile  
phone. Additional accessories may also be provided or  
sold separately. Package contents may therefore vary.  
Using the phone as a modem  
You can use your mobile phone together with a PC or  
a PDA, e.g. to connect to the internet or to send faxes,  
via the Business > Infrared > Data menus.  
To fully benefit from the services available via infrared  
(sending and receiving SMS, e-mails and faxes,  
uploading pictures and sound files to your phone,  
phonebook synchronisation, GPRS Wizard, etc.), you  
must install the Philips Mobile Phone Tools Light  
software on your PC. This software is available on  
register your mobile to access the available content,  
including Mobile Phone Tools.  
To maximise the performance of your Philips mobile  
phone and not to void the warranty, always purchase  
Philips Authentic Accessories that are specially  
designed for use with your phone. Philips Consumer  
Electronics cannot be held liable for any damage due  
to use with non authorised accessories.  
Charger  
Charges your battery in any AC outlet. Small enough  
to carry in a briefcase/handbag.  
The software is not compatible with Apple Macintosh  
computers. It only supports Windows 98 SE, ME, XP  
and 2000 (Service Pack 3 and up mandatory in this  
case).  
Carry case  
Protects your phone from nicks and scratches.  
Data connect kit  
Provides easy data connection to your Philips mobile  
phone. The USB cable enables high speed  
Specific software modules for Lotus Notes, Lotus  
Organizer and Microsoft Outlook are designed to  
allow synchronisation of your Philips mobile phone  
61  
 
   
with these applications (refer to their respective user  
guides for detailed information).  
the headset connector, then connect the video end to  
the video IN connector of your TV or VCR. See  
“Demo mode” on page 19 for detailed information on  
how to select pictures and display them in a slideshow.  
TV Link  
This data cable allows you to display a slide show on  
your TV. Simply connect the data end of the cable to  
62  
 
Keep your phone in a safe place and keep it  
out of small children's reach.  
Avoid writing down your PIN code. Try to  
Precautions  
Radio Waves  
remember it instead.  
Your cellular mobile phone is a low power  
radio transmitter and receiver. When it is  
operating, it sends and receives radio waves.  
The radio waves carry your voice or data  
signal to a base station that is connected to the  
telephone network. The network controls the power  
at which the phone transmits.  
• Your phone transmits/receives radio waves in the  
GSM frequency (900 / 1800 MHz).  
• The GSM network controls transmission power  
(0.01 to 2 watts).  
• Your phone complies with all relevant safety  
Switch off the phone and remove the battery if you are  
going to leave it unused for a long time.  
Change your PIN code after purchasing the phone  
and to activate call restriction options.  
The design of your phone complies with all  
applicable laws and regulations. However  
your phone may cause interference with  
other electronic devices. Consequently you  
should follow all local recommendations and  
regulations when using your cellular phone both at  
home and when away. Regulations on the use of  
cellular phones in vehicles and aircraft are  
particularly stringent.  
Public concern has been focused for some time on the  
possible health risks for users of cellular phones. The  
current research on radio wave technology, including  
the GSM technology, has been reviewed and safety  
standards have been drawn up to ensure protection  
from exposure to radio wave energy. Your cellular  
telephone complies with all applicable safety  
standards and the Radio Equipment and  
standards.  
• The CE mark on your phone shows compliancy  
with European electromagnetic compatibility (Ref.  
89/336/EEC) and low voltage directives (Ref. 73/  
23/EEC).  
Your cellular mobile phone is your responsibility. To  
avoid damage to yourself, to others or to the phone  
itself, read and follow all the safety instructions and  
make them known to anyone borrowing your phone.  
Furthermore to prevent unauthorised use of your  
phone:  
63  
 
 
Telecommunications Terminal Equipment Directive  
1999/5/EC.  
In areas where you are requested to turn off radio  
transmitting devices, such as quarries or other areas  
where blasting operations are in progress.  
Check with the vehicle manufacturer that  
electronic equipment used in your vehicle  
will not be affected by radio energy.  
Always switch off your phone...  
Inadequately protected or sensitive electronic  
equipment may be affected by radio energy. This  
interference can lead to accidents.  
Before boarding an aircraft and/or when  
packing the phone in your luggage: the use  
of mobile phones in an aircraft may be  
dangerous for the operation of the aircraft, disrupt the  
mobile phones network and may be illegal.  
In hospitals, clinics, other health care  
centres and anywhere else where you may be  
in the close vicinity of medical equipment.  
Pacemakers  
If you have a pacemaker:  
• Always keep the phone more than 15 cm from your  
pacemaker when the phone is switched on, in order  
to avoid potential interference.  
• Do not carry the phone in a breastpocket.  
• Use the ear opposite to the pacemaker to minimise  
the potential interference.  
• Switch off your phone if you suspect that  
In areas with  
a
potentially explosive  
interference is taking place.  
atmosphere (e.g. petrol stations and also  
areas where the air contains dust particles,  
such as metal powders).  
Hearing aids  
If you are a user of a hearing aid, consult your  
physician and hearing aid manufacturer to learn  
whether your particular device is susceptible to  
cellular phone interference.  
In a vehicle transporting flammable products (even if  
the vehicle is parked) or a vehicle powered by liquefied  
petroleum gas (LPG), check first that the vehicle  
complies with the applicable safety rules.  
64  
 
network. Setting the backlight for a shorter period  
of time as well as avoiding unnecessary navigating  
in the menus will also help to save the battery’s  
energy for longer phoning and stand-by  
performances.  
Improved performance  
In order to improve the performance of your phone,  
reduce radio energy emission, reduce battery  
consumption and ensure safe operation adhere to the  
following guidelines:  
For the optimal and satisfactory operation of  
the phone you are recommended to use the  
phone in the normal operating position  
(when not using in hands-free mode or with  
a hands-free accessory).  
• Do not expose your phone to extreme  
temperatures.  
Battery information  
• Your phone is powered by a rechargeable battery.  
• Use specified charger only.  
• Do not incinerate.  
• Do not deform or open the battery.  
• Do not allow metal objects (such as keys in your  
pocket) to short circuit the battery contacts.  
• Avoid exposure to excessive heat (>60° C or  
140° F), moisture or caustic environments.  
You should only use Philips Authentic  
Accessories, as the use of any other  
accessories may damage your phone and will  
make all guarantees for your Philips phone  
null and void.  
Treat the phone with care. Any misuse will void the  
International Guarantee.  
• Do not immerse the phone in any liquid; if your  
phone is damp, switch it off, remove the battery  
and let them dry for 24hrs before using them again.  
To clean the phone, wipe it with a soft cloth.  
• Placing and receiving calls consumes the same  
amount of battery energy. However, the mobile  
consumes less energy in idle screen when kept in  
the same place. When in idle screen and while you  
are moving, your phone consumes energy to  
transmit updated location information to the  
Make sure damaged parts are replaced immediately by  
a qualified technician and that they are replaced with  
genuine Philips replacement parts.  
65  
 
especially when featuring a metallic finish. Be very  
careful in this case when picking up your phone and  
also avoid using it with an ambient temperature over  
40° C.  
Your mobile phone and your car  
Studies have shown that speaking on the  
telephone while driving lowers your  
concentration, which can be dangerous.  
Adhere to the following guidelines:  
Environmental care  
• Give your full attention to driving. Pull off the road  
and park before using the phone.  
• Respect the local regulations in countries where you  
drive and use your GSM phone.  
• If you want to use your phone in a vehicle, install  
the hands-free car kit which is designed for that  
purpose.  
• Ensure that your phone and car kit do not block  
any air bags or other security devices fitted in your  
car.  
Remember to observe the local regulations  
regarding the disposal of the packaging  
materials, exhausted batteries and old phone  
and please promote their recycling.  
Philips has marked the battery and packaging with  
standard symbols designed to promote the recycling  
and appropriate disposal of your eventual waste.  
The battery should not be disposed of  
with general household waste.  
The use of an alarm system to operate a vehicle's light  
or horn to indicate incoming phone calls is prohibited  
on public roads in some countries. Check local  
regulations.  
The labelled packaging material is  
recyclable.  
A financial contribution has been made  
to the associated national packaging  
recovery and recycling system.  
EN 60950 Norm  
In hot weather or after prolonged exposure to the sun  
The plastic material is recyclable (also  
identifies the type of plastic).  
(e.g., behind  
a
window or  
a
windscreen), the  
temperature of your phone's casing might increase,  
66  
 
In-Fusio and the games  
engine Exen are  
trademarks of In-Fusio  
France.  
JAVA is a trademark of Sun  
Microsystems, Inc.  
T9® is a trademark of Tegic  
Communications Inc.  
Tegic Euro. Pat.  
App. 0842463  
69  
 
SAR Information - EU (RTTE)  
THIS MODEL PHONE MEETS THE EU REQUIREMENTS  
FOR EXPOSURE TO RADIO WAVES  
Your mobile phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the limits for  
exposure to radio frequency (RF) energy recommended by the Council of the European Union. These limits are  
part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The  
guidelines were developed by independent scientific organisations through periodic and thorough evaluation of  
scientific studies. The limits include a substantial safety margin designed to assure the safety of all persons,  
regardless of age and health.  
The exposure standard for mobile phones employs a unit of measurement known as the Specific Absorption Rate,  
or SAR. The SAR limit recommended by the Council of the European Union is 2.0 W/kg. Tests for SAR have  
been conducted using standard operating positions with the phone transmitting at its highest certified power level  
in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR  
level of the phone while operating can be well below the maximum value. This is because the phone is designed to  
operate at multiple power levels so as to use only the power required to reach the network. In general, the closer  
you are to a base station antenna, the lower the power output.  
Before a phone model is available for sale to the public, compliance with the European RTTE directive must be  
shown. This directive includes as one essential requirement the protection of the health and the safety for the user  
and any other person.  
The highest SAR value for this Philips 362 / CT 3622 model phone when tested for compliance against the  
standard was 0.124 W/kg. While there may be differences between the SAR levels of various phones and at various  
positions, they all meet the EU requirements for RF exposure.  
69  
SAR Information - EU (RTTE)  
 
 
SAR Information - International (ICNIRP)  
THIS MOBILE PHONE MEETS INTERNATIONAL REQUIREMENTS  
FOR EXPOSURE TO RADIO WAVES  
Your mobile phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the limits for  
exposure to radio frequency (RF) recommended by international guidelines (ICNIRP). These limits are part of  
comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines  
were developed by independent scientific organisations through periodic and thorough evaluation of scientific  
studies. The guidelines include a substantial safety margin designed to assure the safety of all persons, regardless of  
age and health.  
The exposure standard for mobile phones employs a unit of measurement known as the Specific Absorption Rate,  
or SAR. The SAR limit stated in the international guidelines is 2.0 W/kg. Tests for SAR are conducted using  
standard operating positions with the phone transmitting at its highest certified power level in all tested frequency  
bands. Although the SAR is determined at the highest certified power level, the actual SAR of the phone while  
operating can be well below the maximum value. This is because the phone is designed to operate at multiple power  
levels so as to use only the power required to reach the network. In general, the closer you are to a base station, the  
lower the power output of the phone.  
The highest SAR value for this Philips 362 / CT 3622 model phone when tested for use at the ear is 0.124 W/kg.  
While there may be differences between the SAR levels of various phones and at various positions, they all meet  
the relevant international guidelines for RF exposure.  
SAR InformDatoiownnlo-aIndtferornmaWtiownwa.lS(oImCNanIuRaPls).com. All Manuals Search And Download.  
70  
 
We hereby declare that all essential radio test suites  
have been carried out and that the above named  
product is in conformity to all the essential  
requirements of Directive 1999/5/EC.  
Declaration of  
conformity  
We,  
The conformity assessment procedure referred to in  
Article 10 and detailed in Annex V of Directive 1999/  
5/EC has been followed related to articles 3.1 and 3.2  
with the involvement of the following Notified Body:  
BABT, Claremont House, 34 Molesey Road, Walton-  
on-Thames, KT12 4RQ, UK  
Philips France - Mobile Telephony  
4 rue du Port aux Vins - Les patios  
92156 Suresnes Cedex  
FRANCE  
declare under our sole responsibility that the product  
Philips 362  
Identification mark: 0168  
CT 3622  
Cellular Mobile Radio GSM 900/GSM 1800  
TAC: 355314 00  
Le Mans, 22nd June, 2005  
Jean-Omer Kifouani  
Quality Manager  
to which this declaration relates, is in conformity with  
the following Standards:  
In case your Philips product is not working correctly or  
is defective, please return your phone to the place of  
purchase or to the Philips National Service Center.  
Refer to the International Guarantee shipped in the  
box for information on Service centers and technical  
documentation relevant to your equipment.  
EN 60950, EN 50360 and EN 301 489-07  
EN 301 511 v7.0.1  
 

Peavey Speaker 12P User Manual
Pella Window 80ED0101 User Manual
Pentax Digital Camera ZX 30 User Manual
Philips Air Cleaner AC4004 00 User Manual
Philips Air Conditioner CS E15DB4EW User Manual
Philips Cassette Player AQ 6681 14 User Manual
Philips Telephone SWL6120 User Manual
Pioneer Musical Table DJM 250 K User Manual
PLUS Vision Projector V 1080 User Manual
PYLE Audio Flat Panel Television PSW112 User Manual