Philips Car Speaker HTS3511E User Manual

Register your product and get support at  
HTS3510  
HTS3520  
HTS3511E  
EN User manual  
HI  
 
9
Troubleshooting  
18  
19  
Contents  
10 Index  
1
Notice  
4
4
4
4
Copyright  
About Progressive Scan  
Trademarks  
2
Important  
Safety  
Product care  
Disposal of your old product  
5
5
5
and batteries  
6
3
4
Your home theater  
Main unit  
Remote control  
6
6
7
Connect your home theater  
Connectors  
Connect to theTV  
8
8
8
Connect audio fromTV or other devices 9  
Connect a microphone  
9
5
Use your home theater  
Before you start  
Choose your sound  
10  
10  
10  
10  
12  
12  
13  
13  
13  
Play a disc  
Play from a USB storage device  
More play features for disc or USB  
Play from radio  
Play audio fromTV or other devices  
Create MP3 audio les  
6
Change settings  
14  
14  
14  
15  
15  
15  
Access the setup menu  
Change general settings  
Change audio settings  
Change video settings  
Change preference settings  
7
8
Update software  
Check software version  
Update software from a CD-R or USB 16  
16  
16  
Product specications 16  
EN  
3
 
ABOUT DIVX VIDEO-ON-DEMAND: This  
DivX Certied device must be registered in  
order to play DivX Video-on-Demand (VOD)  
content. To generate the registration code,  
locate the DivX VOD section in your device  
setup menu. Go to vod.divx.com with this code  
to complete the registration process and learn  
more about DivX VOD.  
1 Notice  
Copyright  
This item incorporates copy protection technology  
that is protected by U.S. patents and other  
intellectual property rights of Rovi Corporation.  
Reverse engineering and disassembly are  
prohibited.  
Windows Media and the Windows logo are  
trademarks, or registered trademarks of  
Microsoft Corporation in the United States and/  
or other countries.  
About Progressive Scan  
Consumers should note that not all high denition  
television sets are fully compatible with this  
HDMI, and HDMI logo, and High-Denition  
Multimedia Interface are trademarks or  
registered trademarks of HDMI licensing LLC in  
the United States and other countries.  
product and may cause artifacts to be displayed in  
the picture. In case of 525 or 625 progressive scan  
picture problems, it is recommended that the user  
switch the connection to the ‘standard denition’  
output. If there are questions regarding ourTV set  
compatibility with this model 525p and 625p DVD  
player, please contact our customer service center.  
The USB-IF Logos are trademarks of Universal  
Serial Bus Implementers Forum, inc.  
Trademarks  
CLASS 1  
LASER PRODUCT  
Manufactured under license from Dolby  
Laboratories. Dolby, Pro Logic, and the  
double-D symbol are trademarks of Dolby  
Laboratories.  
DivX , DivX Certied and associated logos are  
registered trademarks of DivX, Inc. and are used  
under license.  
ABOUT DIVX VIDEO: DivX is a digital video  
format created by DivX, Inc. This is an ofcial  
DivX Certied device that plays DivX video.  
software tools to convert your les into DivX  
video.  
4
EN  
 
Never place the product or any objects  
on power cords or on other electrical  
equipment.  
2 Important  
Read and understand all instructions before you  
use your home theater. If damage is caused by  
failure to follow instructions, the warranty does  
not apply.  
If the product is transported in  
temperatures below 5°C, unpack the  
product and wait until its temperature  
matches room temperature before  
connecting it to the power outlet.  
Visible and invisible laser radiation when  
open. Avoid exposure to beam.  
Do not touch the disc optical lens inside the  
disc compartment.  
Safety  
Risk of electric shock or re!  
Risk of overheating!  
Never expose the product and accessories  
to rain or water. Never place liquid  
containers, such as vases, near the product.  
If liquids are spilt on or into the product,  
disconnect it from the power outlet  
immediately. Contact Philips Consumer  
Care to have the product checked before  
use.  
Never place the product and accessories  
near naked ames or other heat sources,  
including direct sunlight.  
Never insert objects into the ventilation  
slots or other openings on the product.  
Where the mains plug or an appliance  
coupler is used as the disconnect device,  
the disconnect device shall remain readily  
operable.  
Never install this product in a conned  
space. Always leave a space of at least four  
inches around the product for ventilation.  
Ensure curtains or other objects never  
cover the ventilation slots on the product.  
Risk of contamination!  
Do not mix batteries (old and new or  
carbon and alkaline, etc.).  
Remove batteries if they are exhausted or  
if the remote control is not to be used for a  
long time.  
Batteries contain chemical substances, they  
should be disposed of properly.  
Product care  
Disconnect the product from the power  
outlet before lightning storms.  
When you disconnect the power cord,  
always pull the plug, never the cable.  
Do not insert any objects other than discs  
into the disc compartment.  
Do not insert warped or cracked discs into  
the disc compartment.  
Remove discs from the disc compartment  
if you are not using the product for an  
extended period of time.  
Risk of short circuit or re!  
Before you connect the product to the  
power outlet, ensure that the power  
voltage matches the value printed on the  
back or bottom of the product. Never  
connect the product to the power outlet if  
the voltage is different.  
Only use microber cloth to clean the  
product.  
Risk of injury or damage to the home theater!  
For wall-mountable products, use only the  
supplied wall mount bracket. Secure the  
wall mount to a wall that can support the  
combined weight of the product and the  
wall mount. Koninklijke Philips Electronics  
N.V. bears no responsibility for improper  
wall mounting that results in accident, injury  
or damage.  
For speakers with stands, use only the  
supplied stands. Secure the stands to the  
speakers tightly. Place the assembled stands  
on at, level surfaces that can support the  
combined weight of the speaker and stand.  
EN  
5
 
Disposal of your old product  
and batteries  
3 Your home theater  
Congratulations on your purchase, and welcome  
to Philips!To fully benet from the support that  
Philips offers, register your home theater at  
Your product is designed and manufactured with  
high quality materials and components, which can  
be recycled and reused.  
Main unit  
When this crossed-out wheeled bin symbol is  
attached to a product it means that the product  
is covered by the European Directive 2002/96/  
EC. Please inform yourself about the local separate  
collection system for electrical and electronic  
products.  
Please act according to your local rules and do not  
dispose of your old products with your normal  
household waste.  
a
Disc compartment  
b
(Open/Close)  
Opens or closes the disc compartment.  
c
(Play/Pause)  
Starts, pauses or resumes play.  
Correct disposal of your old product helps to  
prevent potential negative consequences for the  
environment and human health.  
d
(Stop)  
Stops play.  
In radio mode, erases the current  
preset radio station.  
e
f
(Standby-On)  
Switches the home theater on or to  
standby.  
Your product contains batteries covered by the  
European Directive 2006/66/EC, which cannot be  
disposed with normal household waste.  
Please inform yourself about the local rules on  
separate collection of batteries because correct  
disposal helps to prevent negative consequences  
for the environmental and human health.  
SOURCE  
Selects an audio/video source for the home  
theater.  
g
/
Skips to the previous or next track,  
chapter or le.  
In radio mode, selects a preset radio  
station.  
h
i
Display panel  
Volume control wheel  
6
EN  
 
e
(Navigation buttons)  
Navigate menus.  
In video mode, press left or right to  
fast backward or fast forward.  
Remote control  
In radio mode, press left or right to  
search a radio station; press up or  
down to ne tune a radio frequency.  
a
b
c
d
f
INFO  
Displays information about what is playing.  
u
t
g
h
Playback buttons  
Control playback.  
SURR (Surround Sound)  
Switches to surround sound or stereo  
sound.  
e
i
AUDIO SYNC  
Selects an audio language or channel.  
Press and hold to synchronize audio  
with video. Use with +/-.  
f
g
s
r
j
Numeric buttons  
Selects an item to play.  
k
l
SUBTITLE  
Selects subtitle language for video.  
h
i
q
p
VOCAL  
Turns off or on the vocal by changing the  
audio channel.  
m
n
MIC VOL +/-  
Increases or decreases microphone volume.  
j
KARAOKE  
Toggles through various karaoke options.  
o
n
k
l
m
o
CREATE MP3 / ZOOM  
Accesses the menu to create MP3.  
Zooms into a video scene or picture.  
p
q
r
SOUND  
Selects a sound mode.  
VOL +/-  
Increases or decreases volume.  
(Mute)  
Mutes or restores volume.  
a
(Standby-On)  
Switches the home theater on or to  
standby.  
s
t
BACK  
Returns to a previous menu screen.  
b
c
OPEN/CLOSE  
Opens or closes the disc compartment.  
OK  
Conrms an entry or selection.  
REPEAT / PROGRAM  
Selects or turns off repeat mode.  
In radio mode, program radio stations.  
u
Source buttons  
AUDIO SOURCE: Selects an audio  
input source.  
d
SETUP  
Accesses or exits the setup menu.  
RADIO: Switches to FM radio.  
USB: Switches to USB storage device.  
DISC: Switches to disc source.  
EN  
7
 
c
HDMI OUT  
Connects to the HDMI input on the TV.  
4 Connect your home  
theater  
This section helps you connect your home theater  
to aTV and other devices.The basic connections of  
the home theater with its accessories are provided  
in the Quick Start. For a comprehensive interactive  
d
VIDEO OUT-VIDEO  
Connects to the composite video input on  
the TV.  
e
f
AUDIO IN-AUX  
Connects to the analog audio output on the  
TV or an analog device.  
FM ANTENNA  
Connects the FM antenna for radio  
reception.  
Note  
g
COMPONENT VIDEO OUT-Y Pb Pr  
Connects to the component video input on  
the TV.  
Refer to the type plate at the back or bottom of  
the product for identication and supply ratings.  
Before you make or change any connections,  
ensure that all devices are disconnected from  
the power outlet.  
Connect to the TV  
Connect your home theater directly to a TV  
through one of the following connectors (from  
highest to basic quality video):  
Connectors  
Connect other devices to your home theater.  
a
b
c
HDMI  
Component video  
Composite video  
Side connectors  
Option 1: Connect to the TV through  
HDMI  
MIC  
Note  
a
(USB)  
Audio, video or picture input from a USB  
storage device.  
If the HDTV has a DVI connector, connect  
using an HDMI/DVI adapter.  
b
MIC  
(Cable not supplied)  
Audio input from a microphone.  
Back connectors  
TV  
a
AC MAINS~  
Connects to the power supply.  
b
SPEAKERS  
Connects to the supplied speakers and  
subwoofer.  
8
EN  
 
Option 2: Connect to the TV through  
YPbPr (component video)  
Connect audio from TV or  
other devices  
Note  
Use your home theater to play audio from the  
TV or other device such as a cable box.  
The component video cable or connector  
might be labeled Y Cb Cr or YUV.  
Tip  
(Cable not supplied)  
Press AUDIO SOURCE to select the audio  
output of your connection.  
Component Video Out  
TV  
TV  
Component Video In  
Connect a microphone  
(Microphone not supplied)  
Option 3: Connect to the TV through  
composite video (CVBS)  
Note  
The composite video cable or connector might  
be labeled AV IN, VIDEO IN, COMPOSITE or  
BASEBAND.  
TV  
EN  
9
 
Change surround sound mode  
5 Use your home  
theater  
Experience an immersive audio experience with  
surround sound modes.  
This section helps you use the home theater to  
play media from a wide range of sources.  
Before you start  
Press SURR repeatedly to cycle through the  
available surround modes.  
Check that you:  
Make the necessary connections and complete  
the setup as described in the Quick Start.  
Switch the TV to the correct source for the  
home theater.  
Option  
Description  
MULTI-  
Immersive multi-channel  
CHANNEL sound for an enhanced movie  
experience.  
STEREO  
Two-channel stereo sound. Ideal  
for listening to music.  
Choose your sound  
This section helps you choose the ideal sound for  
your video or music.  
Play a disc  
Change sound mode  
The home theater can play a wide variety of  
discs, including video, audio and mixed media (for  
example, a CD-R that contains JPEG pictures and  
MP3 music).  
Select predened sound modes to suit your  
video or music.  
1
2
Insert a disc into the home theater.  
Press DISC.  
»
The disc plays or the disc main menu  
appears.  
3
Press the following buttons to control play:  
Press SOUND repeatedly to cycle through the  
available sound modes.  
Button  
Navigation  
buttons  
Action  
Navigate menus.  
Sound mode Description  
ACTION /  
ROCK  
Enhanced low and high-range.  
Ideal for action movies and rock  
or pop music.  
OK  
Conrms an entry or selection.  
Starts, pauses or resumes play.  
Stops play.  
DRAMA /  
JAZZ  
Clear mid and high-range. Ideal  
for drama movies and jazz music.  
Skips to the previous or next  
track, chapter or le.  
/
/
CONCERT/ Neutral sound. Ideal for live  
CLASSIC  
concerts and classical music.  
Fast backwards or fast  
SPORTS  
Moderate mid-range and  
surround effects for clear vocals  
and the atmosphere of a live  
sport venue.  
forwards. Press repeatedly to  
change the search speed.  
ZOOM  
Zooms into a video scene or  
picture.  
NIGHT  
Dynamically controlled sound  
mode suitable for watching  
movies at night or for non-  
intrusive background music.  
10 EN  
 
Use video options  
Use karaoke options  
Access several useful features while viewing  
video.  
Access several useful features while playing  
karaoke disc.  
Note  
Note  
Available video options depend on the video  
source.  
Ensure that a microphone (not supplied) is  
connected to the MIC connector on this home  
theater before play.  
Set the microphone volume to the minimum  
level before connecting the microphone to  
prevent howling.  
Button  
Action  
Searches slow-backward or  
slow-forward. Press repeatedly to  
change the search speed.  
For VCD/SVCD, slow-backward  
search is not available.  
/
Button  
Action  
KARAOKE Toggles through various karaoke  
options.  
AUDIO  
SYNC  
Selects an audio language or  
channel.  
[Mic Off]/[Mic On] – Press  
to turn on or off the microphone  
output.  
SUBTITLE Selects subtitle language for video.  
[Vol 20] – Press  
default microphone volume level.  
[Echo +15] – Press  
echo level.  
to set the  
Displays information about what  
is playing.  
INFO  
to set the  
REPEAT  
Repeats a chapter or title.  
[Key] – Press  
to set the pitch  
level that match your voice.  
[Karaoke Scoring] – Press  
set karaoke scoring when playback  
a DVD or VCD.  
Use picture options  
to  
Access several useful features while viewing  
pictures.  
MIC VOL Increases or decreases  
+/-  
microphone volume.  
Button  
Action  
VOCAL  
Turns off or on the vocal by  
changing the audio channel.  
Flips the photo vertically or  
horizontally.  
/
Rotates the picture counter-  
clockwise or clockwise.  
/
Skips to the previous or next  
picture.  
/
REPEAT  
INFO  
Repeats a single le in the folder  
or repeats the entire folder.  
Displays photo albums in a  
thumbnail overview.  
Use audio options  
Access several useful features while audio is  
played.  
Button  
Action  
REPEAT  
Repeats a track or the  
entire disc.  
EN 11  
 
Synchronize audio with video  
Play from a USB storage device  
If the audio and video are not synchronized, you  
can delay the audio to match the video.  
The home theater is tted with a USB connector  
that allows you to view pictures, listen to music or  
watch movies stored on a USB storage device.  
1
Press and hold AUDIO SYNC until the  
audio sync message appears on the display  
panel.  
1
2
Connect the USB storage device to the  
home theater.  
2
Press +/- within ve seconds to sync the  
audio with your video.  
Press USB.  
»
A content browser appears.  
3
4
Select a le, then press OK.  
Quick skip play to a specic time  
Press the playback buttons to control play  
(see ‘Play a disc’ on page 10).  
Quick skip to a specic part of a video by  
entering the time of a scene.  
1
2
During video play, press INFO.  
Note  
Press the Navigation buttons and OK to  
select:  
If the USB storage device does not t into the  
connector, use a USB extension cable.  
The home theater does not support digital  
cameras that need a computer program to  
display photos.  
The USB storage device must be FAT or DOS-  
formatted, and Mass Storage Class compliant.  
[TT Time] : Title time.  
[Ch Time] : Chapter time.  
[Disc Time] : Disc time.  
[Track Time] : Track time.  
3
Enter the time of the scene, then press OK.  
Repeat play a specic section  
More play features for disc or  
USB  
Select sections of audio or video for repeat  
playback.  
1
2
3
4
During playback, press INFO.  
Select [Repeat AB] in the menu.  
Press OK to mark the start point.  
Press OK again to mark the end point.  
Several advanced features are available for video  
or picture playback from a disc or USB storage  
device.  
»
Repeat play starts.  
Play a musical slideshow  
To cancel repeat A-B, press INFO, select  
[Repeat AB] > [Off], then press OK.  
Play music and pictures simultaneously to create  
a musical slideshow. The les must be stored on  
the same disc or USB storage device.  
Note  
1
2
Select a music track, then press OK.  
Repeat play is only possible within a track/  
chapter.  
Press  
BACK and go to the picture  
folder.  
3
Select a picture, then press OK to start  
slideshow.  
4
5
Press to stop slideshow.  
Press again to stop music.  
12 EN  
 
Play from radio  
Create MP3 audio les  
The home theater can store up to 40 radio stations.  
Use the home theater to convert audio CDs into  
1
2
Check that the FM antenna is connected.  
MP3 audio les.  
Press RADIO.  
1
2
Insert an audio CD (CDDA/HDCD) into  
the home theater.  
»
AUTO INSTALL...PRESS PLAY’ appears  
on the display panel if you have not  
installed any radio stations. Press  
Connect a USB storage device to the home  
theater.  
.
3
Press the following buttons to control play:  
3
4
When audio is played, press CREATE MP3.  
Select [Yes] and press OK to conrm.  
Button  
Action  
Selects a preset radio station.  
Searches for a radio station.  
Fine tunes a radio frequency.  
/
CREATE MP3  
/
TRACK  
OPTIONS  
Track01  
04:14  
04:17  
03:58  
04:51  
03:53  
04:09  
04:38  
Speed  
Normal  
Track02  
Track03  
Track04  
Track05  
Track06  
Track07  
Press and hold to erase the  
preset radio station.  
Press to stop the installation of  
radio stations.  
Bitrate  
128kbps  
CRT ID3  
Device  
Yes  
USB1  
PROGRAM Manual: Press once to access  
program mode, and press again  
to store the radio station.  
SUMMARY  
Select Track  
0
Time  
00:00  
Automatic: Press and hold for ve  
seconds to reinstall radio stations.  
Select All  
Start  
Exit  
Deselect All  
Note  
5
Select the settings in the [OPTIONS] panel,  
then press OK.  
AM and digital radio are not supported.  
If no stereo signal is detected, you are  
prompted to install the radio stations again.  
For the best reception, place the antenna away  
from the TV or other sources of radiation.  
[Speed] : Selects the write-to-le speed.  
[Bitrate] : Selects the conversion quality.  
[CRT ID3] : Copies information on the  
tracks in the MP3 les.  
[Device] : Selects the USB device  
which you use to store the MP3 les.  
Change tuning grid  
6
7
Press to access the [TRACK] panel.  
Select an audio track, then press OK.  
In some countries, you can switch the FM tuning  
grid between 50 kHz and 100 kHz. Changing  
tuning grid erases all preset radio stations.  
[Select All] : Selects all tracks.  
[Deselect all] : De-selects all tracks.  
8
Select [Start] in the menu to convert, then  
press OK.  
1
2
3
Press RADIO.  
Press  
Press and hold  
or ‘GRID 10’ (100 kHz) is displayed.  
.
»
A new folder is created in the USB storage  
until ‘GRID 9’ (50 kHz)  
device to store all the new MP3 audio les.  
To exit the menu, select [Exit] and  
press OK.  
Play audio from TV or other  
devices  
Note  
During the conversion process, do not press  
any buttons.  
DTS CDs and copy-protected CDs cannot be  
converted.  
Write-protected or password-protected USB  
storage device cannot be used to store MP3 les.  
Press AUDIO SOURCE repeatedly to select the  
audio output of the connected device (see ‘Connect  
audio from TV or other devices’ on page 9).  
EN 13  
 
Change general settings  
6 Change settings  
1
2
3
Press SETUP.  
This section helps you to change the settings of  
your home theater.  
Select [General Setup], then press OK.  
Select and adjust the following settings:  
Caution  
[Disc Lock] : Restricts play to disc.  
Password (PIN code) is required to  
unlock the disc before play.  
Most of the settings are already congured  
with the best value for the home theater.  
Unless you have a specic reason to change a  
setting, it is best to leave it at the default value.  
[Display Dim] : Changes the brightness  
of the display panel.  
[OSD Language] : Selects the on-  
screen display menu language.  
[Screen Saver] : Enables or disables  
screen saver mode. If enabled, the  
screen enters idle mode after 10  
minutes of inactivity (for example, in  
pause or stop mode).  
Access the setup menu  
1
Press SETUP.  
The following menu appears.  
»
[Sleep Timer] : Sets a sleep timer to  
switch the home theater to standby  
after a specic time.  
[Auto Standby] : Enables or disables  
auto standby. If enabled, the home  
theater switches to standby after 30  
minutes of inactivity (for example, in  
pause or stop mode).  
Symbol  
Description  
[General Setup]  
[Audio Setup]  
[DivX(R) VOD Code] : Displays the  
DivX VOD registration code for the  
home theater.  
[Video Setup]  
[Preference Setup]  
4
Press OK to conrm your choice.  
Note  
2
3
Select a setup menu, then press OK.  
Before you purchase DivX videos and play  
them on the home theater, register the home  
VOD code.  
See the following sections for information  
about how to change the settings of your  
home theater.  
Press  
BACK to return to the previous  
menu, or press SETUP to exit.  
Note  
You cannot change a setting that is grayed out.  
14 EN  
 
Change audio settings  
Note  
The best setting is automatically selected for  
the TV. If you need to change the setting,  
ensure that the TV supports the new setting.  
Some video settings depend on the video  
source, ensure that the disc and the TV  
support the setting or feature.  
1
2
3
Press SETUP.  
Select [Audio Setup], then press OK.  
Select and adjust the following settings:  
[Speakers Volume] : Sets the volume  
of each speaker to obtain the ideal  
audio balance.  
[Speakers Delay] : Sets the delay time  
for center and rear speakers to obtain  
an equal audio transmission from all  
the speakers.  
For settings related to HDMI, the TV must be  
connected through HDMI.  
For settings related to progressive or  
component video, the TV must be connected  
through Component Video.  
[HDMI Audio] : Enables or disables  
HDMI audio output for the TV.  
[Audio Sync] : Sets a delay for audio  
output when you play a video disc.  
[Prologic II Mode] : Selects a 5.1  
surround sound mode to suit your  
video or music.  
Change preference settings  
1
2
3
Press SETUP.  
Select [Preference Setup], then press OK.  
Select and adjust the following settings:  
[Audio] : Selects audio language for video.  
[Subtitle] : Selects subtitle language for  
video.  
4
Press OK to conrm your choice.  
Note  
[Disc Menu] : Selects menu language  
for video disc.  
[Parental] : Restricts access to discs  
that are recorded with ratings. To  
play all discs irrespective of the rating,  
select level ‘8’.  
For settings related to HDMI, the TV must be  
connected through HDMI.  
[PBC] : Displays or skips the content  
menu for VCD and SVCD discs.  
[MP3/JPEG Display] : Displays the  
MP3/JPEG folders or all the les.  
[Password] : Sets or changes a PIN  
code to play a restricted disc. Enter  
0000’ if you do not have a PIN or if  
you have forgotten your PIN.  
[DivX Subtitle] : Selects a character  
set that supports the DivX subtitle.  
[Version Info.] : Displays the software  
version for the home theater.  
Change video settings  
1
2
3
Press SETUP.  
Select [Video Setup], then press OK.  
Select and adjust the following settings:  
[TV System] : Selects a TV system that  
is compatible with the TV.  
[TV Display] : Selects a picture display  
format to t the TV screen.  
[Picture Settings] : Selects a  
predened color setting.  
[HDMI Setup] : Selects HDMI video  
resolution and the wide screen display  
format for the TV. The Wide Screen  
Display option is only available for 16:9  
wide screen TV display setting.  
[Progressive] : Enables or disables  
progressive scan mode.  
[Default] : Resets the home theater to the  
default settings programmed at the factory.  
4
Press OK to conrm your choice.  
Note  
If your preferred disc language is not available,  
you can select [Others] from the list and enter  
the 4-digit language code which can be found  
at the back of this manual.  
If you select a language that is not available  
on a disc, the home theater uses the default  
language of the disc.  
[HD JPEG] : Enables or disables display  
of high denition JPEG images.  
4
Press OK to conrm your choice.  
You cannot reset disc lock, password (PIN code)  
and parental control settings to their default values.  
EN 15  
 
7 Update software  
8 Product specifications  
To check for new updates, compare the current  
software version of your home theater with the  
latest software version (if available) on the Philips  
web site.  
Note  
Specication and design are subject to change  
without notice.  
Region code  
The type plate on the back or bottom of the  
home theater shows which regions it supports  
Check software version  
1
2
Press SETUP.  
Select [Preference Setup] > [Version Info.],  
then press OK.  
Country  
Europe, United Kingdom  
DVD  
»
The software version is displayed.  
Asia Pacific, Taiwan, Korea  
Latin America  
Update software from a CD-R  
or USB  
1
Check for the latest software version on  
Search for your model and click on  
‘software&drivers’.  
Australia, New Zealand  
Russia, India  
2
3
4
Download the software onto a CD-R or  
USB storage device.  
Insert the CD-R or connect the USB  
storage device to the home theater.  
China  
Follow the instructions on the TV to  
conrm the update.  
»
When complete, the home theater  
automatically switches off and on again.  
Playback media  
If not, disconnect the power cord for a few  
seconds and then reconnect it.  
DVD-Video, DVD+R/+RW, DVD-R/-RW, DVD+R  
DL, CD-R/CD-RW,Audio CD,Video CD/SVCD,  
Picture CD, MP3-CD,WMA-CD, DivX-CD, USB  
storage device  
Caution  
File Format  
Do not turn off the power or remove the  
CD-R or USB storage device when the  
software update is in progress because you  
might damage the home theater.  
Audio: .mp3, .wma  
Video: .divx, .divx ultra, .mpeg, .mpg  
Picture: .jpeg, .jpg  
Amplier  
Total output power:  
HTS3510, HTS3511E: 300 W RMS  
(30% THD)  
HTS3520: 600 W RMS (30% THD)  
Frequency response: 20 Hz-20 kHz  
Signal-to-noise ratio: > 65 dB (CCIR) /  
(A-weighted)  
Input sensitivity:  
AUX: 2 V  
16 EN  
 
Video  
Weight:  
Signal system: PAL / NTSC  
HDMI output: 480i/576i, 480p/576p, 720p,  
1080i, 1080p  
Center: 0.77 kg  
HTS3510. HTS3511E - Front/Rear: 0.56  
kg/each  
HTS3520 - Front/Rear: 0.68 kg/each  
Cable length:  
Audio  
Sampling frequency:  
Center: 2 m  
Front: 3 m  
Rear: 10 m  
MP3: 32 kHz, 44.1 kHz, 48 kHz  
WMA: 44.1 kHz, 48 kHz  
Constant bit rate:  
Laser specication  
MP3: 32 kbps - 320 kbps  
WMA: 64 kbps - 192 kbps  
Type: Semiconductor laser GaAIAs (CD)  
Wave length: 645 - 665 nm (DVD), 770 -  
800 nm (CD)  
Output power: 6 mW (DVD), 7 mW  
(VCD/CD)  
Beam divergence: 60 degrees.  
Radio  
Tuning range: FM 87.5-108 MHz (50/100  
kHz)  
Signal-to-noise ratio: FM 50 dB  
Frequency response: FM 180 Hz-10 kHz  
USB  
Compatibility: Hi-Speed USB (2.0)  
Class support: UMS (USB Mass Storage  
Class)  
File system: FAT12, FAT16, FAT32  
Maximum memory support: < 160GB  
Main Unit  
Power supply:  
Latin America/Asia Pacic: 110-240V,  
~50-60Hz  
China/Russia/India: 220-240V, ~50Hz  
Power consumption:  
HTS3510, HTS3511E: 60 W  
HTS3520: 100 W  
Standby power consumption: 0.9 W  
Dimensions (WxHxD): 360 x 58 x 320  
(mm)  
Weight: 2.84 kg  
Subwoofer  
Impedance: 8 ohm  
Speaker drivers: 165 mm (6.5”) woofer  
Dimensions (WxHxD): 122.6 x 307 x 369  
(mm)  
Weight: 3.84 kg  
Cable length: 3 m  
Speakers  
System: full range satellite  
Speaker impedance: 8 ohm (center), 4 ohm  
(Front/Rear)  
Speaker drivers: 3” full range  
Frequency response: 150 Hz-20 kHz  
Dimensions (WxHxD):  
Center: 160.9 x 95 x 92 (mm)  
Front/Rear: 95 x 160.9 x 87 (mm)  
EN 17  
 
Sound  
9 Troubleshooting  
No sound.  
Ensure that the audio cables are connected  
Warning  
and select the correct input source  
(for example, AUDIO SOURCE) for the  
device you want to play.  
Risk of electric shock. Never remove the  
casing of the product.  
No sound on HDMI connection.  
You might not hear any sound if the  
connected device is not HDCP (High-  
bandwidth Digital Content Protection)  
compliant or only DVI compatible. Use an  
analog or digital audio connection.  
To keep the warranty valid, never try to repair the  
product yourself.  
If you have problems using this product, check the  
following points before you request service. If you  
still have a problem, register your product and get  
If you contact Philips, you will be asked for the  
model and serial number of your product.The  
model number and serial number are on the back  
or bottom of your product.Write the numbers  
here:  
Model No. __________________________  
Serial No. ___________________________  
Ensure that the [HDMI Audio] is enabled.  
No sound from TV program.  
Connect an audio cable from the audio  
input on the home theater to the audio  
output on the TV, then press AUDIO  
SOURCE repeatedly to select the correct  
audio source.  
Distorted sound or echo.  
Ensure that the TV volume is muted or set  
to minimum if you are playing audio through  
the home theater.  
Main unit  
Audio and video are not synchronized.  
The buttons on this home theater do not work.  
1) Press and hold AUDIO SYNC. 2) Press  
+/- within ve seconds.  
Disconnect the home theater from the  
power outlet for a few minutes, then  
reconnect.  
Play  
Disc cannot be played.  
Picture  
Clean the disc.  
No picture.  
Ensure that the home theater supports the  
disc (see ‘Product specications’ on page  
16).  
Ensure that the TV is switched to the  
correct source for this home theater.  
If this happens when you change the TV  
system, switch to its default mode: 1) Press  
to open the disc compartment. 2) Press  
the Numeric buttons3.  
Ensure that the home theater supports the  
region code of the DVD.  
For DVD±RW or DVD±R, ensure that the  
disc is nalized.  
DivX video les cannot be played.  
If this happens when you switch on the  
progressive scan mode, switch to its  
default mode: 1) Press to open the  
disc compartment. 2) Press the Numeric  
buttons1.  
Ensure that the DivX le is encoded  
according to the ‘Home Theater Prole’  
with the DivX encoder.  
Ensure that the DivX video le is complete.  
No picture on HDMI connection.  
DivX subtitles do not display correctly.  
Check if the HDMI cable is faulty. Replace  
Ensure that the subtitle le name is the  
with a new HDMI cable.  
same as the movie le name.  
If this happens when you change the HDMI  
video resolution, switch to its default mode:  
1) Press to open the disc compartment.  
2) Press the Numeric buttons 1.  
Select the correct character set: 1) Press  
SETUP. 2) Select [Preference Setup].  
3) Select [DivX Subtitle]. 4) Select a  
supported character set. 5) Press OK.  
18 EN  
 
The contents of a USB storage device cannot be  
read.  
10 Index  
Ensure that the format of the USB storage  
device is compatible with the home theater  
(see ‘Product specications’ on page 16).  
A
amplier  
16  
Ensure that the USB storage device  
is formatted with a le system that is  
supported by the home theater (note that  
NTFS is not supported).  
audio  
connection  
language  
synchronize with video  
9
11, 15  
12  
No entry or x’ sign appears on the TV.  
The operation is not possible.  
C
care  
5
change settings  
connect  
14  
audio from TV  
guide  
9, 13  
8
microphone  
other devices  
TV  
connectors  
contact us  
9
9
8
8
18  
D
disc  
play  
10  
16  
6
supported discs  
disposal of your product  
DivX  
subtitle  
15  
F
le formats  
16  
K
karaoke  
microphone  
9
L
language  
audio  
disc menu  
on-screen display  
subtitle  
15  
15  
14  
15  
M
MP3  
create MP3 les  
13  
EN 19  
 
O
T
overview  
connectors  
time search video  
troubleshooting  
TV  
12  
18  
8
6
7
main unit  
remote control  
audio from TV  
connect  
9, 13  
8
P
password  
picture  
15  
U
USB  
slide show  
troubleshooting  
play  
12  
18  
play  
12  
16  
software update  
disc  
options  
radio  
troubleshooting  
USB storage device  
product care  
product specications  
progressive scan  
10  
10  
13  
18  
12  
5
V
video  
options  
settings  
synchronize with audio  
11  
15  
12  
16  
4
R
radio  
play  
program  
tune  
13  
13  
13  
tuning grid  
recycle  
region code  
remote control  
repeat  
13  
6
16  
7
10, 12  
S
safety  
5
settings  
general  
14  
15  
15  
15  
15  
parental control  
preferences  
restore factory settings  
video  
slideshow  
play musical slideshow  
software  
12  
update  
version  
16  
16  
sound  
mode  
10  
10  
18  
surround  
troubleshooting  
subtitle  
language  
11  
20 EN  
 

Peavey Car Amplifier 60 120 User Manual
Peavey Microphone PVM 580TN User Manual
Peavey Musical Instrument Amplifier JSXTM Mini ColossalTM Class A Tube Guitar Amplifier User Manual
Pelco Landscape Lighting C2433SM A 8 02 User Manual
Philips Stereo System FW338C User Manual
Philips Work Light T17 E14 User Manual
Pioneer CD Player DEH P2600R User Manual
Polaroid Digital Camera User Manual User Manual
Pride Mobility Mobility Aid INFMANU3111 User Manual
PYLE Audio DJ Equipment PWMA 840 User Manual