L9 1883.1 GB 1/8 15/11/00 13:10 Page 1
Introduction
Thank you for purchasing this television set.
Please read the following instructions carefully to familiarise yourself with all
the features available on your set.
We hope our technology meets entirely with your satisfaction.
Table of Contents
Installation
Presentation of the television set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
The keys on the television set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
The remote control keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Installing your television set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Tuning in to channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Selecting the menu language and the country . . . . . . . . . . . . . . . . . . . . . . .5
Automatic store . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
To renumber the programmes found . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Manual tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Naming the external socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Tuning in to FM radio stations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Automatic tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
To renumber the radio stations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Manual tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Naming the radio stations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Use
Standard use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Choice ofTV or radio mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Selecting the programmes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Screen information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
TV light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Setting the clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Alarm function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Adjusting picture and sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Storing settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Demonstration mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Locking the set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Teletext . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Peripherals
Video recorder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Other equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Headphones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
1
L9 1883.1 GB 1/8 15/11/00 13:10 Page 3
The remote control keys
Incredible Surround
Sound mode
To switch from FM STEREO (and
NICAM STEREO) programmes to
MONO or, for bilingual transmissions,
Activates/de-activates the surround
sound effect. In stereo, this gives
the impression of the loudspeakers
being further apart. In mono, a
stereo spatial effect is simulated.
to choose between DUAL
DUAL (and NICAM-DUAL
NICAM-DUAL
f
and
g
f,
g
and mono).
Standby
To set theTV to standby mode.
To switch the set back on, press
Timer
To select an automatic standby
period (from 0 to 240 minutes).
P
,
or j.
Screen Information
To display the screen information
(p. 9).
Select EXT socket (p.15) or
to access the list of radio
stations (p. 9)
Numerical keys
For direct access to programmes
and teletext pages.
Smart sound controls
To access the preset sound modes:
(CINEMA, MUSIC, SPEECH and
return to PERSONAL
Smart picture controls
To access a series of settings:
RICH (when the room is very
light), NATURAL (optimum
conditions) SOFT (when the
room is very dark) and return to
PERSONAL.
Menu
To call up or exit the menus.
Note: the menus disappear
automatically after 20 seconds if no
further command is given.
Cursor
These 4 keys allow you to select
the different menus
Teletext (p. 14)
or confirmation key (p. 7)
Volume
To adjust the sound level.
Select programme
Selects previous or following
programme (p. 9).
Mute
To disable or enable the sound.
Teletext keys (p. 14)
Radio /TV Mode
To switch between the Radio
andTV mode (p. 9).
Alarm off
To turn off the alarm (p. 11).
It will be reactivated 24 hours later at
the programmed time.
TV Light
To activate / desactivate theTV
light (p.10).
Alarm menu
To call up or exit the alarm
menu (p. 11).
Alarm on/off
To switch the alarm
function on or off (p. 11).
The green ©light on the television
set comes on when the alarm is
activated.
3
L9 1883.1 GB 1/8 15/11/00 13:10 Page 4
Installing your television set
5 cm
æ Positioning your television set
Place yourTV on a solid, stable surface, leaving a space of at least 5
cm around the appliance.
5 cm
5 cm
To avoid accidents, do not put anything on the set such as a cloth
or cover, a container full of liquid (vase) or a heat source (lamp).
The set must not be exposed to water.
 Connecting the aerials
The television set is supplied with 2 internal aerials; one for
receivingTV channels, and the other for receiving FM radio
stations.
• Insert theTV aerial plug into theMsocket at the rear of the set.
• Insert the radio aerial plug into the FM ANT socket.
With portable aerials,the reception may be poor under certain
conditions.You can sometimes improve it by repositioning the aerial. If
the reception remains unsatisfactory, an external aerial should be used.
FM ANT
ê Connecting the power supply
Insert the mains plug into the wall socket
(220-240V / 50 Hz).
® Remote control
Insert the two R6-type batteries (supplied) making sure that they
are the right way round.
The batteries supplied with this appliance do not contain mercury or nickel
cadmium. Please do not discard your used batteries if you have access to
a recycling facility (if in doubt, consult your dealer). When the batteries are
replaced, use the same type.
† Switching on
To switch on the set, press the on/off key.
A red indicator comes on and the screen lights up.
If the television remains in standby mode, press P
remote control.
on the
The hands of the clock move through 360° when the set is
switched on for the first time.
The indicator flashes when you use the remote control.
4
L9 1883.1 GB 1/8 15/11/00 13:10 Page 5
Tuning in to channels
Selecting the menu language and the country
æ Press the
Remark: the set must be in tv mode (if not, press the j key).
 Press once to select INSTALLATION, then press
The INSTALLATION menu appears.The LANGUAGE option is activated.
menu key.The main menu is displayed.
q
q
q
TV LOCK
TIMER
.
INSTALLATION
lllll 31
'''''
BRIGHTNESS
CO
ê Use the
keys to select your language.The menus appear in the
language selected. If your language is not available, select ENGLISH.
LANGUAGE ENGLISH
COUNTRY
GB
® Press to select COUNTRY.
AUTOSTORE
q
† Select your country using the
keys (GB for Great Britain)
Automatic store
Carry out the above operations æ to †, then :
Ú Select AUTO STORE ( ) and press
.Tuning in starts automatically.
The operation takes a few minutes. A display shows the search status and
the number of programmes found. When it has finished, the menu
disappears and the last programme is displayed.
q
q
q
TV LOCK
TIMER
INSTALLATION
lllll 31
'''''
BRIGHTNESS
COL
LANGUAGE ENGLISH
If no programmes are found, refer to theTips chapter on p. 16.
COUNTRY
GB
q
AUTOSTORE
SORT
º If the transmitter or the cable network broadcasts the automatic sort
q
signal, the programmes will be correctly numbered.
MA
î If not, the programmes found will be numbered in descending order starting
at 59, 58, 57, etc. Use the SORT menu to renumber them.
AUTOSTORE lllll 31
'''''
Some transmitters or cable networks broadcast their own sort parameters (region,
language, etc.).Where this is the case, make your choice using the
confirm with
keys and
.
To renumber the programmes found
æ Press the
menu key.The main menu is displayed.
 Press once to select INSTALLATION, then press,
.
q
q
q
TV LOCK
The INSTALLATION menu appears.The LANGUAGE option is activated.
TIMER
INSTALLATION
ê Press three times to select SORT and then press
.
lllll 31
'''''
BRIGHTNESS
COL
The SORT menu appears.The FROM option is activated.
COUNTRY
GB
q
AUTOSTORE
SORT
® Select the programme you wish to renumber using keys
or
to
.
q
Example: to renumber the programme 58 as 2, press
.
MANUAL STORE
q
† Selection option A (key ) and enter the new number with keys
or
to
(for the example given, press ).
FROM
78
2
TO
Ú Select TO (key ) and press
.The message EXCHANGED appears, the
EXCHANGE
q
exchange takes place ( to cancel). In our example programme 58 is
numbered as 2 (and programme 2 as 58).
º Select the option FROM (key ) and repeat stages ®to Ú as many times
as there are programmes to renumber.
î To exit from the menus, press
.
5
L9 1883.1 GB 1/8 15/11/00 13:10 Page 6
Manual tuning
This menu allows you to store the programmes one by one.
æ InTV mode, press .This main menu comes up on the screen.
 Press once to select INSTALLATION then press
.
ê Select MANUAL STORE ( ) and press
.
The MANUAL STORE menu appears.
TV LOCK
q
q
q
TIMER
® Select SYSTEM (only available on certain models).
Use to select, depending on the versions : FRANCE (standard LL’),
WEST- EU (standard BG), EAST- EU (standard DK) or UK (standard I).
† Select SEARCH and press .The search begins.
INSTALLATION
BRIGHTNESS
CO
lllll 31
'''''
AUTOSTORE
SORT
q
q
q
MANUAL STORE
As a soon as a programme is found, the search will stop.
If you know the frequency of the programme required, simply enter its
SYSTEM
SEARCH
FINE TUNE
AUTO
168 MHz
number using keys
.
If no programme is found, refer to theTips chapter on p. 16.
l
0
2
''''' '''''
PROGRAM NO.
STORE
q
Ú If reception is unsatisfactory, select FINE TUNE and press
or
to fine
tune.
º Select PROGRAM NO. and enter the required programme number
using or
î Select STORE and press
The message STORED appears.The programme has been stored.
œ Repeat steps † to î as many times as there are programmes to store.
.
.
To exit the menus, press
.
Naming the external socket
æ InTV mode, press
.The main menu is displayed on-screen.
 Press once to select INSTALLATION and press
.The INSTALLATION
q
q
q
TV LOCK
TIMER
menu appears.
INSTALLATION
lllll 31
'''''
ê Use the key to select EXTERNAL and press
to bring up the menu.
BRIGHTNESS
COL
SORT
You have access to a series of names which allow you to customise the
names of the external socket. When you next select an external socket, its
chosen name will be displayed for a few seconds.
q
q
q
MANUAL STORE
EXTERNAL
® To exit from the menus, press
.
6
L9 1883.1 GB 1/8 15/11/00 13:10 Page 7
Tuning in to FM radio stations
Automatic tuning
æ Press j on the remote control to change to radio mode.The screen
goes blank.
 Press to bring up the main menu.
The menu appears with the INSTALLATION option highlighted.
ê Press .The INSTALLATION menu appears with the AUTOSTORE option
highlighted.
BASS
lllll 35
'''''
WAKEUP
INSTALLATION
VOLUME
q
q
lll
7
''''''''
BAL
® Press .The search begins.The operation takes a few minutes.The display
demonstrates the progession of the search and the number of FM stations
found. When it has finished, the INSTALLATION menu reappears
automatically.
AUTOSTORE
SORT
MA
q
q
AUTOSTORE lllll 12
'''''
If no stations are found, refer to theTips chapter on p. 16.
† You can now, if you wish, store and number your stations as required: see
the following chapter.
Ú To exit the menus, press
.
To renumber the radio stations
æ Ensure that the set is in radio mode (j key).
 Press .The list of radio stations appears with their frequencies.
You can also access this list via the SORT menu in the INSTALLATION menu.
ê Use or to select the radio station you wish to renumber.
Example: to renumber station 6 as 1: press
To access other radio stations, select <> (using ) and press
following pages or for the previous pages.
® Press to confirm.The line is displayed in white.
† Select the radio station you wish to change with.
In our example, press
BASS
lllll 35
'''''
WAKEUP
INSTALLATION
VOLUME
q
.
q
to display the
l
0
''''''''''
BAL
AUTOSTORE
SORT
MANUAL STORE
< >
q
q
q
1
2
3
4
5
103.50
103,90
96.00
.
Ú Press
to confirm.The line is displayed in white.
to confirm. Radio station No. 6 is renumbered as 1
101.90
102.30
º Press OK
(and No. 1 as 6).
î Repeat steps ê to º as many times as there are stations to renumber.
œ To exit the menus, press
.
7
L9 1883.1 GB 1/8 15/11/00 13:10 Page 8
Manual tuning of the radio stations
æ Ensure the television set is in radio mode (j).
 Press to bring up the main menu.
The menu appears with the INSTALLATION option activated.
BASS
lllll 35
'''''
WAKEUP
INSTALLATION
VOLUME
q
q
ê Press
.The INSTALLATION menu appears.
lll
7
''''''''
BAL
® Press twice to select MANUAL STORE and press
.
AUTOSTORE
q
q
q
SORT
THE MANUAL STORE menu appears.
MANUAL STORE
† Select SEARCH and press
.The search begins.As soon as an FM radio
station is found, the search will stop.
If you know the frequency of the station required, simply enter its number
SEARCH
100.50
q
using keys
Example: for 98 MHz press
.
PRESET NO
STORE
4
.
If no station is found, refer to theTips chapter on p.16.
Ú Select PRESET NO and enter the required station number using
or
.
º Select STORE and press
.
The message STORED appears.The programme has been stored.
î Repeat steps † to º as many times as there are programmes to be
stored.
œ To exit the menus, press
.
Naming the radio stations
If you wish, you can name the first 5 radio stations (1 to 5).
æ Ensure the television set is in radio mode (j).
 Select the programme you wish to name.
ê Press
to bring up the main menu.
The menu appears with the INSTALLATION option activated.
® In the INSTALLATION menu, then MANUAL STORE menu, select NAME
and press
.
† Use the
keys to move around in the area which displays the name (5
keys to select the characters.
once the name is entered.The name of the station is stored.
º Repeat the operation for each radio station you wish to name.
î To exit the menus, press the key.
characters). Use the
Ú Press
8
L9 1883.1 GB 1/8 15/11/00 13:10 Page 9
General use
Choice of TV or radio mode
Your set may receive bothTV programmes and FM radio stations.
The j key on the remote control is used to switch betweenTV mode
and radio mode.
RADIO
TV mode
TheTV programmes appear on-screen.
Radio mode
π
°
~
◊
¬
ON/OFF
SET
RESET
ALARM
The television screen is off.The sound from the radio comes out of the
speakers on the left and right of the set.
Note: in radio mode, the
key gives direct access to a limited number of
settings and the INSTALLATION menu is specific to the radio reception.
Selecting the programmes
TV mode
Use the P
or
keys to select the programmes (from 0 to 59).
The number and sound mode are displayed for a few moments on the
B
screen.To compose a two-figure number using the numerical keys
add the 2 figure before the hyphen disappears.
,
Z
e
I.S.
/
nd
1
4
7
2
5
8
0
3
6
9
The title of certain programmes appears for a few moments at the bottom of the
screen.To view a programme that has been locked, enter the confidential code
(see p. 13).
SMART
é
È
Radio mode
Use the P
MENU
OK
L
or
keys to select the FM radio stations (from 1
to 40).The number, frequency and sound mode are displayed for a few
seconds before the screen goes blank.
List of radio stations
c
P
a
In radio mode, the
can then use the or keys to change the station.
To change the page, select <> (using ) then press or
or following pages. You can also modify how the stations are stored (see p. 7).
key dislays or clears the list of radio stations.You
to display the previous
Screen information
TV or radio mode
Press to display for a few seconds or clear the programme number,
B
time and sound mode. In radio mode, the frequency of the station is also
displayed.
Z
e
I.S.
/
1
4
7
2
5
3
6
Permanent display of the programme number
Press
for five seconds to activate the permanent display of the
programme number. Press once to cancel.
9
L9 1883.1 GB 1/8 15/11/00 13:10 Page 10
TV light
The feet and clock of the television set are luminous and backlit.
B
æ Use the
key on the remote control to switch the lighting on and off .
Z
e
I.S.
/
 Use the
keys to increase or decrease the intensity of the 3 levels of
1
4
7
2
5
8
0
3
6
9
lighting.
Note: the lighting controls are independent of the television controls (it may be in
TV, radio or standby mode). However the lighting does not operate when the set is
switched off using the on-off key.
SMART
é
È
MENU
OK
L
c
π
P
a
RADIO
~
°
¬
◊
ON/OFF
SET
RESET
ALARM
Setting the clock
The television set is equipped with an analogue clock on the front of the
set. It is set using the menus.
Automatic reset:
The time is automatically reset, each time the set is switched on, using
teletext information taken fromTV programme 1.
• If it does not have teletext, the time will not be updated.
• If the appliance has been disconnected from the mains, the hands on the
clock will move through 360° when switched on.
The television set is equipped with a backup system which stores the time when
the appliance is disconnected from the mains.
To manually set the clock:
æ Press
SET ALARM on the remote control.
The CLOCK menu is displayed on the screen.
 Press once to select SET CLOCK.
SET CLOCK
START TIME
MODE
17:08
07:10
q
ê Enter the current time using
clock is updated a few seconds later.
® Press SET ALARM again to exit the menu.
Changing the time:
or
.The time on the analogue
For countries which change their clocks twice a year (summer time, winter
time), the clocks are reset automatically using the teletext information
taken from programme 1. However, the time is only updated when the
television set is switched on.
10
L9 1883.1 GB 1/8 15/11/00 13:10 Page 11
Alarm function
This function allows you to use yourTV as an alarm clock
.
You can programme your alarm to wake you up to theTV, radio or 3
different melodies.
Setting the alarm
æ Press
SET ALARM on the remote control.
The ALARM menu is displayed on the screen.
SET CLOCK
START TIME
MODE
17:20
07:10
q
You can also access this menu by pressing
, then selecting the ALARM option.
VOLUME
l
2
''''''''''
 If you want to set the time on the clock, select SET CLOCK and enter the
TV PROGRAM
RADIO PRESET
ALARM
1
2
current time using keys
or
.
Important: the time is reset automatically each time the set is switched on using
teletext information taken from programme 1. If programme 1 does not have
teletext, the update will not take place. If you modify the time, the analogue clock
on the set will be reset a few seconds later.
q
MORNING BIRD
RAINFOREST
FALLING STAR
ê Select START TIME and enter the time at which the set is to switch on using
the keys
.
® Select MODE and press
. Now choose the mode in which you want your
set to wake you up.
† Select TV PROGRAM, RADIO PRESET or ALARM then enter the number of
theTV or radio programme or choose between 3 different melodies
(
MORNING BIRD, RAINFOREST or FALLING STAR).
Note: it is the last setting selected that will be used for the alarm.
B
Ú Press
to return the first level of the ALARM menu.
Z
e
I.S.
/
º Select VOLUME and adjust the level required for the alarm.
1
4
7
2
5
8
0
3
î Press
to exit the menu.
6
Activating the alarm
9
SMART
È
SMART
æ Press
de-activate the alarm function.The green © indicator on the set comes
on when the alarm is on.
 Press to put the set into standby mode. It will switch on automatically at
ALARM ON/OFF on the remote control to activate or
é
MENU
OK
L
the programmed time and mode. The light also comes on when the alarm
comes on.
c
P
a
ê If you leave the set switched on, it will merely change mode and
programmes at the set time.
Caution: for the alarm to work, do not switch off the set using the on-off button
on the front of the set.
RADIO
~
π
°
The set switches to standby automatically after 4 hours if no further commands
are given.
◊
¬
ON/OFF
SET
RESET
ALARM
Switching off the alarm
æ When the alarm is on, press
RESET (or
) on the remote control to
switch off. It will start up automatically 24 hours later at the programmed
time.
In the ALARM mode, press any key to interupt the alarm, It will repeat 5 minutes
later, otherwise the alarm will run for 30 seconds before switching off for 5 minutes
and then run for 30 seconds before stopping completely.
 If you wish to turn off the alarm function completely, press
ALARM
ON/OFF.The © indicator is switched off.
11
L9 1883.1 GB 1/8 15/11/00 13:10 Page 12
Adjusting picture and sound
Adjusting the picture (the set must be inTV mode).
Press
. Use
and
to adjust: BRIGHTNESS, COLOUR, CONTRAST,
SHARPNESS,TINT, CONTRAST+ and NOISE RED
• SHARPNESS: alters the crispness of the image.
.
BRIGHTNESS
COLOUR
lllll 31
'''''
lllll 31
'''''
lllll 31
'''''
lllll 31
'''''
CONTRAST
SHARPNESS
TINT
•TINT: alters the colour balance.There are three options: COLD (blue tint), NORMAL
(balanced) or HOT (red tint).
NORMAL
• CONTRAST+: automatically adjusts the contrast of the image according to content
(the darkest part of the image is always black).
• NOISE RED: alleviates picture noise (snowy picture).This setting is useful when
reception is difficult.
Adjusting the sound
Press
and AVL.
.
Use
and
to adjust: DELTA VOL,BALANCE,TREBLE, BASS
DELTA VOL
BALANCE
TREBLE
BASS
l
0
0
''''' '''''
l
''''' '''''
lllll 31
• DELTA VOLUME (volume difference): allows you to compensate for the volume
differences between the different programmes or the EXT sockets.This adjustment is
available for programmes 1 to 40 and the EXT sockets.
'''''
lllll 35
'''''
AVL
lll
25
'''''''
• AVL (Automatic Volume Leveler): automatic volume control used to avoid sudden
increases in volume, particularly when changing programme or during
advertisements.
Storing settings
You can store your own sound and picture settings.
æ First carry out your menu settings.
BASS
lllll 35
'''''
AVL
lll
25
'''''''
 Next, select PERSONAL and press
.The message STORED appears.
PERSONAL
TV LOCK
DEMO
OFF
q
The settings are stored.
ON
Values are saved under PERSONAL in the Smart sound and picture controls
and ).
(
Note: volume and DELTA VOLUME are automatically stored after a change of
programme or when the set is put in standby.They do not need to be stored in the
PERSONAL menu.
Demonstration mode (the set must be inTV mode).
This function displays the main functions of the television set.
æ Press to bring up the main menu.
 Select DEMO and press to switch the mode to ON.
PERSONAL
TV LOCK
DEMO
q
q
ON
q
TIMER
ê Press
to put the set on standby.
INSTALLATION
q
® Press P
to switch on and activate the demonstration mode.The main
functions of the television set are displayed in a continuous sequence.
† To stop the demonstration, press any key on the remote control.
Be careful when switching on as the demonstration will start up automatically.
Ú To de-activate the demo mode, switch the DEMO menu to OFF.
12
L9 1883.1 GB 1/8 15/11/00 13:10 Page 13
Locking the set
This function allows you to lock the set in order to limit its use completely or
partially.This menu can only be accessed when the set is inTV mode.
Key lock
AVL
lll
25
'''''''
PERSONAL
TV LOCK
TIMER
OFF
æ
Press
,select TV LOCK ( ) and press
.
q
q
 Set the LOCK to ON.The keys are locked.
INS
ê Switch off the set and put the remote control out of site.The set cannot be
used (it can only be switched on using the remote control).
LOCK
OFF
PARENTAL CONT.
q
To cancel: switch LOCK to OFF
.
Programme lock
This menu allows you to partially or fully lockTV programmes. Radio stations
cannot be locked.
LOCK
PARENTAL CONT.
OFF
æ
Â
ê
Press
,select TV LOCK ( ) and press
.
q
Select PARENTAL CONT. and press
.
Enter your confidential access code.The first time, enter the code 0711 then
confirm by re-entering 0711.The menu appears.
ACCESS CODE
- - - -
®
Select PROGRAM NO. and use keys
to enter the number of the
programme. Use
if you wish to lock the EXT sockets.To lock all of them,
select ALL.
CHANGE CODE XXXX
PROGRAM NO.
LOCK
1
NO
q
†
Ú
Select LOCK then YES.
CLEAR ALL
Repeat steps
5 programmes separately.
Press to exit.To watch a programme which has been locked you will now
need to enter the confidential code;otherwise the screen will remain blank.
When a locked programme is displayed, use the keys to access other
programmes (the keys are used to enter the code).
®
and
†
for each programme to be locked.You can lock
º
P
Caution: in the case of encrypted programmes which use an external decoder, it is
necessary to lock the corresponding EXT socket (and not the programme number).
To unlock all programmes
Repeat stages
æ
to
ê
above, then:
. All programmes are unlocked.
®
Select CLEAR ALL and press
To change the confidential code
Repeat steps
æ
to
ê
above, then:
®
†
Select CHANGE CODE and enter your own 4-digit code.
Confirm by entering it again.Your new code will be stored.
If you have forgotten your confidential code, enter the universal code 0711 twice.
To exit:
Press
.
13
L9 1883.1 GB 1/8 15/11/00 13:10 Page 14
Teletext
Teletext is an information system, broadcast by certain channels, which can be read like a newspaper. It
also provides subtitles for people with hearing difficulties or those who are unfamiliar with the language
in which a particular programme is being broadcast (cable networks, satellite channels, etc.).
Caution :This set is not fitted to display the special characters of every languages. In certain countries, the
teletext pages will not be displayed properly.
Press:
To obtain:
Switch teletext
on/off
To call up or exit from teletext. At first, the main
index page appears with a list of the items available.
Each page has a corresponding 3-figure number.
If the selected channel does not broadcast teletext, 100 will
appear and the screen will remain blank (in this case, exit
from teletext and choose another channel).
L
B
Z
e
I.S.
/
1
4
7
2
5
8
0
3
6
9
Selecting a
teletext page
0
9
Use keys
to
or
to enter the page number
required. For example: for page 120, press
.
SMART
SMART
The number is displayed in the top-left corner, the page
counter starts searching and the page is displayed.
Repeat the procedure to consult another page.
If the counter continually searches, this means that the
selected page is not broadcast. Choose another number.
é
È
MENU
OK
L
Direct access to
subject headings
Coloured zones are displayed at the bottom of the
screen.The 4 coloured keys give access to the
corresponding subjects or pages.
c
P
a
The coloured zones flash when the subject or the page is
not yet available.
RADIO
~
π
°
~
π
°
Temporary
on/off
To switch teletext temporarily on/off.
◊
¬
ON/OFF
SET
RESET
Page
enlargement
Press this key to display the upper then lower part of
the screen, and then return to the normal page size.
ALARM
Stop the
sequence of
sub-pages
Some pages contain sub-pages which follow on
automatically from one another. This key allows sub-
page sequence to be interrupted.
The I appears in the top left hand corner.
¬
◊
Superimposition
Reveal
To activate or de-activate screen overlay.
Use this key to reveal/conceal hidden information
(answers to puzzles).
MENU
Favourite pages
For teletext programmes 1 to 41, you can store
4 favourite pages which you can then access via the
coloured keys
.
/
æ Press
.
 Enter the number of the page required.
Press then the coloured key of your choice.
The page is stored.
ê
® Repeat steps  and ê for the other coloured
keys.
† From now on, when you consult teletext, your
favourite pages appear in colour at the bottom of
the screen.To get back to the normal subject
headings, press
.
To remove these settings, hold
for 3 seconds.
14
L9 1883.1 GB 1/8 15/11/00 13:10 Page 15
Connecting other appliances
Video recorder
Video recorder (only)
Connect as shown using a good quality euroconnector
cable.
If your video recorder does not have a euroconnector socket, the
only connection possible is via the aerial cable. You will therefore
need to tune in your video recorder test signal and assign it to
programme number 0 (see manual store. p. 6).To reproduce the
EXT 1
video recorder picture, press
.
Video recorder with decoder
Connect the decoder to the second euroconnector on the
video recorder.You can then record scrambled
transmissions.
Other equipment
You can connect any other apparatus to the EXT socket
(satellite receiver, decoder, DVD, games, etc.).The socket
has audio and video input/outputs and RGB inputs.
EXT 1
Headphones
The headphones socket is on the right-hand side of the set. When
the headphones are plugged in, the sound on the set is cut off.
Adjust the volume using the
a
keys on the remote
control or the keys on the television.
a
The headphones must have an impedance of between 32 and
600 ohms.
n
B
To select connected equipment
e
I.S.
/
Z
Press
to select the EXT socket.
1
4
2
5
3
6
The switching is automatic on most appliances (decoder, etc.).
15
L9 1883.1 GB 1/8 15/11/00 13:10 Page 16
Tips
Poor reception or no picture
The proximity of mountains or high buildings can cause ghost pictures, echoing or
shadows. If this is the case, try re-positioning the aerial or use an external one.Try using
FINE TUNE (p. 6), ensure the right system is selected (p.6)?
Check that the aerial plug or euroconnector is properly connected Check also that the
.
aerial is capable of receiving broadcasts in this frequency range (UHF orVHF)?
Is the set inTV mode? Press j.
Adjusting the picture
If the picture is out of focus, or if you are having difficulties finding the right settings, select
one of the Smart picture controls
(p.12).
(p. 3) and store it using the PERSONAL setting
In case of bad reception (fuzzy picture), set the NOISE RED to ON (p. 12).
The picture is in black and white
To replay a video cassette, check that it is recorded in the same format as that of the
video recorder (PAL, SECAM or NTSC). Check the colour setting in the menu.
No sound
If certain programmes have a picture but no sound, it is most likely that the correctTV
system has not been selected (p. 6).
In radio mode, check that the aerial is properly connected. If reception is poor, use an
external aerial.
Standby
When you switch on the set, if it remains in standby mode and the LOCKED message is
displayed, this means that the LOCK function is activated (p. 13).
The set switches automatically to standby if it receives no signals for a period of 15 minutes
To save electricity, your set is equipped with low energy consumption components which limit
energy consumption when the set is on standby (less than 3W).
.
Still having problems?
If the set breaks down, never try to repair it yourself. Consult your after-sales service
department instead.
Recycling
The materials used in your set are either reusable or can be recycled.
To minimise environmental waste, specialist companies collect appliances and
dismantle them, retrieving any materials that can be used again
(ask your dealer for further details).
ß
16
|