L01_15534 (GB) Front page 7/22/05 10:33 AM Page 1
L01_15534 (GB) Front page 7/22/05 10:33 AM Page 3
Remote control keys
GB For detail explanation of the remote control’s
!
#
1
function and safety page, please refer to page 3.
FR Pour les instructions détaillées sur la fonction
de télécommande et les pages d’informations
relatives à la sécurité, veuillez vous reporter à la
page 3.
NL Zie pagina 3 voor meer informatie over de
functies van de afstandsbediening en de
veiligheidsinformatie.
2
3
$
%
&
DE Eine detaillierte Beschreibung der Funktionen
der Fernbedienung sowie Sicherheitshinweise
finden Sie auf Seite 3.
IT Per istruzioni dettagliate sulle funzioni del
telecomando e la sicurezza andare a pagina 3.
DK Yderligere oplysninger om fjernbetjeningens
4
5
funktion og sikkerhed finder du på side 3.
(
)
NO For detaljert forklaring av fjernkontrollens
funksjoner og sikkerhetsside, se side 3.
SU Mer information om fjärrkontrollens funktion
och säkerhetssidan finns på sidan 3.
6
7
SF Lisätietoja kaukosäätimen toiminnasta ja
turvallisuusasioista saat sivulta 3.
ES Para explicaciones más detalladas de la función
de control remoto y la página de seguridad,
diríjase a la página 3.
~
+
PT Para obter explicações detalhadas sobre as
funções do controlo remoto e da página de
segurança, consulte a página 3.
8
9
GR °È· ÏÂÙÔÌÂÚ›˜ ÂÂÍËÁ‹ÛÂȘ Ù˘ ÏÂÈÙÔ˘ÚÁ›·˜
ÙÔ˘ ÙËϯÂÈÚÈÛÙËÚ›Ô˘ Î·È ÙË ÛÂÏ›‰· Ì ̤ÙÚ·
·ÛÊ·Ï›·˜ ·Ó·ÙÚ¤ÍÙ ÛÙË ÛÂÏ›‰· 3.
TR Uzaktan kumandanın ifllevi ve güvenlik sayfası ile
ilgili ayrıntılı açıklama için 3. sayfaya bakın.
HU A távkapcsoló funkcióival és a biztonsági oldallal
kapcsolatos részletes tudnivalókat a 3. oldalon
olvashatja.
RU èÓ‰Ó·ÌÓ ÓÔËÒ‡ÌË ̇Á̇˜ÂÌËfl ÔÛθڇ
‰ËÒڇ̈ËÓÌÌÓ„Ó ÛÔ‡‚ÎÂÌËfl Ë
ËÌÙÓχˆË˛ ÔÓ ÚÂıÌËÍ ·ÂÁÓÔ‡ÒÌÓÒÚË
ÒÏÓÚËÚ ̇ ÒÚ‡Ìˈ 3.
PL Szczegółowy opis funkcji pilota i informacje
o bezpieczeństwie znajdują się na stronie 3.
CZ Podrobné pokyny pro používání funkce
dálkového ovladače a bezpečnostní pokyny
najdete na straně 3.
SK Detailné vysvetlenie funkcií diaľkového
ovládača a o informácie bezpečnosti
nájdete na strane 3.
L01_15534 (GB) Front page 7/22/05 10:33 AM Page 4
L01_15534 (GB) 1-8_220705 7/22/05 10:23 AM Page 1
Introduction
Thank you for purchasing this television set.
This handbook has been designed to help you install and operate yourTV set.
We would strongly recommend that you read it thoroughly.
We hope our technology meets entirely with your satisfaction.
Note: Specification and information subject to change without notice.
Table of Contents
Installation
Installing your television set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
The keys on theTV set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Remote control keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Quick installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Program sort . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Program name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Manual store . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Other settings in the Install menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Operation
Using the radio (only available on certain versions) . . . . . . . . . . . . . . . . . . . . . . .5
Picture settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Sound adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Feature settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Timer function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
TV lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Teletext . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Peripherals
Video recorder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Other equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Amplifier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Side connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
To select connected equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Practical information
Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Safety Information: Electric, Magnetic and Electromagnetic Fields . . . . . . . . . . . .10
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Recycling
This packaging of this set can be recovered or recycled.Apply to the local authorities in order
to minimise environmental waste.
Disposal of your old product.
Your product is designed and manufactured with high quality materials and components, which
can be recycled and reused.
When this crossed-out wheeled bin symbol is attached to a product it means the product is
covered by the European Directive 2002/96/EC. Please inform yourself about the local
separate collection system for electrical and electronic products.
°
Please act according to your local rules and do not dispose of your old products with
your normal household waste.The correct disposal of your old product will help prevent
potential negative consequences for the environment and human health.
1
L01_15534 (GB) 1-8_220705 7/22/05 10:23 AM Page 2
Installing your television set
&
“
Positioning the television set
Remote control
5 cm
5 cm
5 cm
Place yourTV on a solid, stable surface, leaving
a space of at least 5 cm around the appliance.
To avoid accidents, do not put anything on the
set such as a cloth or cover, a container full of
liquid (vase) or a heat source (lamp).The set
must not be exposed to water.
Insert the two R6-type batteries (supplied)
making sure that they are the right way round.
Check that the mode selector is set toTV.
The batteries supplied with this appliance do
not contain mercury or nickel cadmium. If you
have access to a recycling facility, please do not
discard your used batteries (if in doubt,
consult your dealer).When the batteries are
replaced, use the same type.
é
Connections
‘
Switching on
FM.
ANT.
or
• Insert the aerial plug into the : socket at
the rear of the set.
• For the versions equipped with a radio:
insert the radio aerial socket into the FM
ANT socket using the adapter supplied.
If you are using an indoor aerial, reception may be
difficult in certain conditions.You can improve
reception by rotating the aerial. If the reception
remains poor, you will need to use an external aerial.
• Insert the mains plug into a wall socket (220-
240V / 50 Hz).
To switch on the set, press the on/off key.
A red indicator comes on and the screen
lights up. Go straight to the chapter Quick
installation on page 4.
If the television remains in standby mode,
press P # on the remote control.
The indicator will flash when you use the
remote control.
The keys on theTV set
The television set has 4 keys which are located
on the front or the top of the set depending
on the model.
TheVOLUME - + (- ” +) keys are used to
adjust sound levels.The PROGRAM - + (- P +
or - +) keys are used to select the required
programmes.To access the menus,
simultaneously hold down the ” - and ” +
keys.The PROGRAM - + keys may then be
used to select an adjustment and the - ” +
keys to make that adjustment.
To exit from the menus, hold down the 2 ” -
and ” + keys.
Note: when the Child Lock function is activated,
these keys are unavailable (refer to Features
menu on page 7).
2
L01_15534 (GB) 1-8_220705 7/22/05 10:23 AM Page 3
Remote control keys
#
Standby
&
Screen information / permanent no.
To display / clear the program number, name (if it
exists), time, audio mode and time remaining for the
sleep feature. Press the key for 5 seconds to activate
permanent display of the number.This key is also
used to exit from the menu.
Lets you place theTV set on standby.To turn on the
TV, press P @ @, b, 0 to 9 (or Â).
Teletext keys (p. 8), VCR keys (p.11) and list of
radio stations ı (p. 5)
$
%
Sleep
To select an automatic standby after a preset time
(from 0 to 240 minutes).
é
Surround Sound (only available on certain versions)
To activate / deactivate the surround sound effect.
In stereo, this gives the impression that the
speakers are further apart. For models equipped
withVirtual Dolby Surround*, you can experience
Dolby Surround Pro Logic sound effects. In mono, a
stereo spatial effect is simulated.
VCR key (p.11)
&
(
16:9 modes (p. 9)
Pre-set image
Used to access a series of stored settings: Rich,
Natural, Soft, Multimedia and return to Personal.
Teletext (p. 8)
)
~
Program selection
“
‘
To access the next or previous programme.The
number, (name) and sound mode are displayed for a
few moments.
Pre-set sound
Used to access a series of stored settings: Speech,
Music, Theatre and return to Personal.
Menu
For some programs, the title of the program will be
displayed at the bottom of the screen.
Teletext keys (p.8)
orVCR keys (p.11)
Sound mode
Used to force programmes in Stereo to Mono or,
for bilingual programs, to choose between Dual I or
Dual II. ForTV sets equipped for Nicam reception,
depending on the programmes, you can force the
Stereo Nicam sound to Mono or select between
Nicam Dual I, Nicam Dual II and Mono.
The Mono indication is red when in forced position.
(
§
To call up or exit the menus.
Cursor / Format
+
,
These 4 keys are used to navigate through the
menus.The îÏ keys are used to enlarge or
compress the picture vertically.
Volume
è
!
ç
To adjust the sound level
Mute
To mute or restore the sound.
Number keys
Direct access to the programmes. For a 2 digit
program, enter the 2nd digit before the dash
disappears.
* “Dolby” and the double-D symbols £ are trademarks of the
Dolby Laboratories Licensing Corporation.
Manufactured under license of Dolby Laboratories Licensing
Corporation.
à
Selection of EXT socket
Press several times to select EXT1, EXT2, S-VHS
and AV.
Radio /TV mode
To switch theTV set to radio orTV mode (for
versions equipped with radio).
* VCR key
The remote control lets you control the main functions of theVCR.
Press and hold down theVCR key located on the side of the remote control, then press one of the keys to access
theVCR functions: b % ∫ H îÏ È¬ P @# · ¢ Ê Æ 09
The remote control is compatible with all VCRs using the RC5 standard.
Safety Information
•
Plug theTV into a 220V – 240V AC, 50 Hz supply.
•
Disconnect mains plug when :
–
–
–
–
•
the red light below theTV screen is flashing continuously.
a bright white line is displayed across the screen.
there is a lightning storm.
the set is left unattended for a prolonged period of time.
Cleaning theTV screen. Never use abrasive cleaning agents. Use a slight damp chamois leather or soft cloth.
No naked flame sources, such as lighted candles, should be placed on top of theTV or in the vicinity.
Do not place yourTV set under direct sunlight or heat.
•
•
•
Do not cover or block theTV as it could lead to overheating.
Leave at least 5 cm around each side ofTV set to allow for proper ventilation.
Avoid placing your set (e.g. near the window) where it is likely to be exposed to rain or water.
Battery Usage CAUTION –To prevent battery leakage that may result in bodily injury, property damage, or damage to the
unit:
•
•
•
–
–
–
Install all batteries correctly, with + and – aligned as marked on the unit.
Do not mix batteries (old and new or carbon and alkaline, etc.).
Remove batteries when the unit is not used for a long time.
UsefulTips
•
Do not leave your set on standby mode for a prolonged period of time. Switch off set to allow it to be
demagnetised.A demagnetised set supports good picture quality.
•
•
Do not shift or move the set around when it is switched on. Uneveness in colour in some parts of the screen may occur.
Never attempt to repair a defectiveTV yourself.Always consult a skilled service personnel.
3
L01_15534 (GB) 1-8_220705 7/22/05 10:23 AM Page 4
Quick installation
When you turn on theTV set for the first
time, a menu is displayed on screen.This menu
prompts you to select the country and
language for the menus:
“ The search starts automatically.All the available
TV programmes and radio stations * will be
stored. This operation takes a few minutes.The
display shows the progress of the search and
the number of programs found. At the end of
the search, the menu disappears.
Select Country
Country
Language
To exit or interrupt the search, press H. If no
programme is found, consult the possible solutions p. 10.
‘ If the transmitter or cable network sends the
automatic sort signal, the programs will be
numbered correctly. In this case, the
DK
E
F
FI
GB
Español
Svenska
English
Dansk
Nederlands
Æ
installation is complete.
If the menu is not displayed, press and hold down
the ”- and ”+ keys on theTV set for 5
seconds to display the menu.
( If this is not the case, you need to use the
Sort menu to number the programs correctly.
Some transmitters or cable networks broadcast
their own sort parameters (region, language, etc.).
In this case, indicate your choice using the îÏ
keys and validate with ¬.
& Use the îÏ keys on the remote control to
select your country and validate with ¬.
If your country does not appear in the list, select
choice “. . .”
é Next select your language using the îÏ
keys and validate with ¬.
* Only on versions equipped with a radio.
Program sort
é With the cursor, select the Install menu
followed by the Sort menu.
“ Select the programme you want to move using
& Press key H.The Main menu is displayed on
the screen.
the îÏ keys and press ¬.
‘ Then use the îÏ keys to select the new
number and validate with È.
Mainge
• Picture
• Sound
• Features
Install
• Language
• Country
00
01 TF1
02 FR2
03 FR3
04 C +
$ Install
• Auto Store
• Manual Store
Æ
( Repeat steps “ and ‘ for each program you
$
Æ
Sort
wish to renumber.
05 ARTE
• Name
§ To quit the menus, press d.
Program name
If required, you can give a name to the
programmes and external connectors.
Note: on installation, the programs are named
automatically when an identification signal is sent.
& Press the H key.
‘ Use the Ȭ keys to move around the
name display area (5 characters) and the
îÏ keys to select the characters.
( When the name has been entered, use the
È key to exit.The name is stored.
§ Repeat steps “ to ( for each programme
you wish to name.
é With the cursor, select the Install menu, then
Name
“ Use the îÏ keys to select the programme
to name or rename.
è To quit the menus, press d.
4
L01_15534 (GB) 1-8_220705 7/22/05 10:23 AM Page 5
Manual store
This menu is used to store the programmes
* Except for France (LL’ standard), you must select
choice France.
one at a time.
‘ Search: press ¬.The search starts. Once a
programme is found, the scanning stops and its
name is displayed (when available). Go to the
next step. If you know the frequency of the
required programme, this can be entered
directly using the 0 to 9 keys.
If no picture is found, consult the possible solutions (p. 10).
( Program No.: enter the required number
with the Ȭ or 0 to 9 keys.
§ FineTune: if the reception is not satisfactory,
adjust using the Ȭ keys.
& Press the H key.
é With the cursor, select the Install menu then
Manual store:
Mainge
• Picture
Manual Store
• Sound
• Features
$ Install
$
System
Europe Æ
• Search
• Program No.
• Fine Tune
• Store
è Store: press ¬.The program is stored.
! Repeat steps ‘ to ! for each programme to
store.
“ System: select Europe (automatic detection*)
or Western Europe (BG standard), Eastern
Europe (DK standard), United Kingdom (I
standard) or France (LL’ standard).
ç To quit the menus, press d.
Other settings in the Install menu
automatic sort signal, the programmes will be
& Press the H key and select the Install menu:
é Language: to change the display language for
the menus.
“ Country: to select your country (GB for
Great Britain).
This setting is used for the search, automatic
programme sort and teletext display. If your
country does not appear in the list, select “. . .”
‘ Auto Store: to start automatic search for all
programmes available in your region. If the
transmitter or cable network sends the
numbered correctly. If this is not the case, you
need to use the Sort menu to renumber the
programmes (see p. 4).
Some transmitters or cable networks broadcast
their own sort parameters (region, language, etc.).
In this case, indicate your choice using the îÏ
keys and validate with ¬.To quit or interrupt the
search, press H. If no picture is found, consult the
possible solutions (p. 10).
( To quit the menus, press d.
(only available on certain versions)
Using the radio
Choice ofTV or radio mode
Using the radio menus
Press the  key on the remote control to
switch theTV set to eitherTV or radio mode.
In radio mode, the number, station name
(if available), frequency and sound mode are
displayed on the screen. To enter the station
names, use the Name menu (p. 4)
Use the H key to access the specific radio
setting.
Search for radio stations
If you used the quick installation, all available
FM stations have already been stored.To start
a new search, use the Install :Auto Store
menu (for a complete search) or Manual
Store (for a station by station search).The
Sort and Name menus let you sort or name
the radio stations. Operation of these menus is
the same as for theTV menus.
Program selection
Use the 0 9 or @ P # keys to select the
FM stations (from 1 to 40).
List of radio stations
Press the ı key to display the list of radio
stations radio. Use the îÏ keys to change
station and the d key to exit.
Screensaver
Use the c key to activate/deactivate the
radio screensaver.
5
L01_15534 (GB) 1-8_220705 7/22/05 10:23 AM Page 6
Picture settings
“ Once the adjustments have been made, select
& Press H then ¬.The Picture menu is
Store and press ¬ to store them. Press d
to exit.
displayed:
Description of the adjustments:
• Brightness: this changes picture brilliance.
• Colour: this changes the intensity of the colour.
• Contrast: this changes the difference
between the light and dark tones.
Mainge
Picture
Brightness
• Colour
• Contrast
• Sharpness
• Colour Temp.
• Store
$ Picture
$
--I------ 39
• Sound
• Features
• Install
•
Sharpness: this changes the picture definition.
• ColourTemp.: this changes the colour
rendering: Cold (bluer), Normal (balanced)
or Warm (redder).
• Store: to store the picture adjustments and
settings (as well as the settings for Contrast +
and NR in the Features menu).
é Use the îÏ keys to select a setting and
the Ȭ keys to adjust.
Note: during the picture adjustment, only the
selected line remains displayed. Press îÏ to
display the menu again.
Sound adjustments
Description of the settings:
& Press H, select Sound (Ï) and press ¬.
• Treble: this alters the high frequency sounds.
• Bass: this alters the low frequency sounds.
• Balance: this balances the sound on the left
and right speakers.
• DeltaVolume*: this is used to compensate
any volume discrepancies between the
different programs or EXT sockets.This
setting is available for programs 0 to 40 and
the EXT sockets.
The Sound menu is displayed:
Mainge
• Picture
$ Sound
• Features
• Install
Sound
• Treble
• Bass
-----I--- 56
• Balance
• Delta Volume
• AVL
• Store
• AVL* (AutomaticVolume Leveller): this is
used to limit increases in sound, especially on
program change or advertising slots.
• Store: this is used to store the sound settings.
* Only available on certain versions.
é Use the îÏ keys to select a setting and
the Ȭ keys to adjust.
“ Once the adjustments have been made, select
Store and press ¬ to store these changes.
‘ To quit the menus, press d.
Feature settings
‘ NR: attenuates picture noise (snow) in difficult
reception conditions.
& Press H, select Features (Ï) and press ¬.
You can adjust:
Caution: to store the Contrast + and NR
settings, use the Store choice in the Picture
menu.
é Timer, Child Lock and Parental Cont.: see
next page
“ Contrast +: automatic adjustment of the
picture contrast which permanently sets the
darkest part of the picture to black.
( To quit the menus, press d.
6
L01_15534 (GB) 1-8_220705 7/22/05 10:23 AM Page 7
(only available on certain versions)
Timer function
This menu lets you use theTV set as an alarm.
& Press the H key.
é With the cursor, select the Options menu then
( StartTime: enter the start time.
§ StopTime: enter the standby time.
è Program No.: enter the number of the
programme for the wake-up alarm. For models
equipped with a radio, you can select an FM
station by using the Ȭ keys (the 09
keys are only used to selectTV programs).
! Activate: the settings include:
Timer :
“ Sleep: to select an automatic standby period.
Mainge
Timer
• Picture
• Sound
$ Features
• Install
• Sleep
Time
$
10:56
• Once for a single alarm,
• Daily for each day,
• Stop to cancel.
• Start Time
• Stop Time
• Program No.
• Activate
ç Press b to put theTV set in standby. It will
automatically come on at the time programmed.
If you leave theTV set on, it will just change
programmes at the time entered (and will go to
standby mode at the StopTime).
This setting is also available via the ` key on the
remote control.
‘ Time: enter the current time.
By combining the TV lock and Timer functions,
you can restrict the period during which theTV set
is used, for example by your children.
Note: the time is updated automatically each time
theTV set is switched on via the teletext information
on programme 1. If this programme does not have
teletext, the update will not take place.
(only available on certain versions)
TV lock
You can block certain programs or inhibit use
of theTV set completely by locking the keys.
The first time you enter this, enter code 0711
twice and then enter your new code choice.
The menu is displayed.
Child lock
& Press H.
é With the cursor, select the Options menu and
“ Parental Cont.: Use the îÏ keys to
select theTV programme required and validate
with ¬.The + symbol will be displayed
opposite the programmes or sockets that are
locked. From now on, to view a locked
programme, you must enter your secret code,
otherwise the screen will stay blank.
The access to the Install menu is also locked.
Caution, for encrypted programs using an external
decoder, you must lock the corresponding EXT socket.
‘ Change code: this allows you to enter a new
4 digit code. Confirm your new code by
entering it a second time.
position Child Lock to On.
“ Turn off theTV set and hide the remote
control.TheTV set cannot be used (except via
the remote control).
‘ To cancel: position Child Lock to Off.
Mainge
Features
• Picture
• Sound
$ Features
• Install
• Timer
• Child Lock
• Parental Cont.
• Contrast +
• NR
Arrêt
If you have forgotten your secret code, enter the
universal code 0711 twice.
( Unlock all: this is used to unlock all locked
programmes.
§ Lock All: this is used to lock all theTV
programmes and EXT connectors.
Parental control
& Press the H key, select the Features menu
then Parental Cont.:
é You must enter your secret access code.
è Press the d key to quit.
7
L01_15534 (GB) 1-8_220705 7/22/05 10:23 AM Page 8
Teletext
Teletext is an information system broadcast by certain channels which can be consulted like a
newspaper. It also offers access to subtitles for viewers with hearing problems or who are not familiar
with the transmission language (cable networks, satellite channels, etc.).
Press :
You will obtain:
Teletext call
This is used to call teletext, change to transparent mode
and then exit.The summary appears with a list of items
that can be accessed. Each item has a corresponding 3
digit page number.
¤
POWER
.
∫
%
ı
If the channel selected does not broadcast teletext, the
indication 100 will be displayed and the screen will remain
blank (in this case, exit teletext and select another channel).
™
›
Ó
Ÿ
- TV
- VCR
I.S.
SMART
-
Ë
∏
SMART
ª
`
Selecting a
page
RADIO
Enter the number of the page required using the 0 to 9
or @ P # keys, îÏ. Example: page 120, enter 1 2
0.The number is displayed top left, the counter turns and
then the page is displayed. Repeat this operation to view
another page.
0
9
MENU
¤
If the counter continues to search, this means that the page is
not transmitted. Select another number.
+
+
-
[
”
P
-
Coloured areas are displayed at the bottom of the screen.
The 4 coloured keys are used to access the items or
corresponding pages.
The coloured areas flash when the item or the page is not yet
available.
Direct access
to the items
·
¢
Ê
Æ
3
1
2
5
8
0
4
6
7
9
Contents
This returns you to the contents page (usually page 100).
Ë
™
Y
ù
Temporary
stop
This is used to temporarily disable or activate the teletext
display.
Enlarge a page
This allows you to display the top or bottom part of the
page and then return to normal size.
›
Ó
Stop sub-page
acquisition
Certain pages contain sub-pages which are automatically
displayed successively.This key is used to stop or resume
sub-page acquisition.The indication _ appears top left.
Ÿ
To display or hide the concealed information (games
solutions).
Hidden
information
For teletext programs 0 to 40, you can store 4 favourite
pages which can then be accessed directly using the
coloured keys (red, green, yellow, blue).
MENU
Favourite
pages
Ë
& Press the H key to change to favourite pages mode.
é Display the teletext page that you want to store.
“ Press the coloured key of your choice for 3 seconds.
The page is now stored.
‘ Repeat the operation with the other coloured keys.
( You can now consult teletext and your favourite
pages will appear in colour at the bottom of the
screen.To retrieve the standard items, press H.
To clear everything, press d for 5 seconds.
8
L01_15534 (GB) 1-8_220705 7/22/05 10:23 AM Page 9
Connecting peripheral equipment
Depending on the versions, theTV set will be equipped with 1 or 2 SCART connectors EXT1 and
EXT2 located on the rear. The EXT1 socket has audio, CVBS/RGB inputs and audio, CVBS outputs.The EXT2
socket (if available) has audio, CVBS/S-VHS inputs and audio, CVBS outputs.
Video recorder
Carry out the connections shown opposite, using a good
quality euroconnector cable.
If your video recorder does not have a euroconnector socket, the
only connection possible is via the aerial cable.You will therefore
need to tune in your video recorder's test signal and assign it
EXT 2
EXT 1
programme number 0 (refer to manual store, p. 6).
To reproduce the video recorder picture, press 0.
Video recorder with decoder
Connect the decoder to the second euroconnector socket
VCR
of the video recorder.You will then be able to record
scrambled transmissions.
Other equipment
Satellite receiver, decoder, CDV, games, etc.
ForTV sets with 2 SCART connectors, preferably connect
the equipment delivering RGB signals (digital decoders, DVD
players, games consoles, etc.) to EXT1 and the equipment
delivering S-VHS signals (S-VHS and Hi-8VCRs) to EXT2.
EXT 2
EXT 1
(only available on certain versions)
Amplifier
To connect to a hi-fi system, use an audio connection cable
and connect the “L” and “R” outputs on theTV set to the
“AUDIO IN” “L” and “R” input on your hi-fi amplifier.
EXT 2
L
R
EXT 1
(only available on certain versions)
Front panel connectors
Depending on the versions, the connectors are located on
the front (sometimes under a flap) or on the right-hand
side of theTV set. Make the connections as shown
opposite.With the n key, select AV.
For a monophonic device, connect the audio signal to the
AUDIO L input. Use the e key to reproduce the sound on the
left and right speakers of theTV set.
Headphones
When headphones are connected, the sound on theTV set will
be cut.The @ P # keys are used to adjust the volume level.
The headphone impedance must be between 32 and 600 Ohms.
4
5
8
0
6
To select connected equipment
Press the n key to select EXT1 and on the versions with 2 scarts,
EXT2, S-VHS2 (S-VHS signals from the EXT2 socket) and AV for
the side connections (if available).
7
9
Y
ù
Most equipment (decoder, video recorder) carries out the switching itself.
9
L01_15534 (GB) 1-8_220705 7/22/05 10:23 AM Page 10
Tips
Poor reception
No sound
The proximity of mountains or high buildings
may be responsible for ghost pictures, echoing
or shadows. In this case, try manually adjusting
your picture: see FineTuning (p.5) or modify
the orientation of the outside aerial.
Does your antenna enable you to receive
broadcasts in this frequency range (UHF or
VHF band)?
If on certain channels you receive a picture
but no sound, this means that you do not have
the correctTV system. Modify the System
setting (p. 5).
Teletext
Are certain characters not displayed
correctly? Check that the Country setting
has been positioned correctly (p.5).
Remote control
In the event of difficult reception (snowy
picture) switch the NR on the Options
menu to ON. (p. 6).
TheTV set does not react to the remote
control; the indicator on the set no longer
flashes when you use the remote control?
Replace the batteries.
No picture
If the television does not switch on, please
press the standby key b (located on the
remote control) twice.
Standby
When you switch theTV set on it remains in
standby mode and the indication Locked is
displayed when you use the keys on theTV set?
The Child Lock function is switched On (p. 7).
If the set receives no signal for 15 mins, it
automatically goes into standby mode.
In standby mode, yourTV consumes less than
5W depending on model. In order to be more
environmentally friendly, please use the on/off
(power) switch to turn the set off completely.
Still no results?
Have you connected the aerial socket properly?
Have you chosen the right system? (p. 5).
Poorly connected euroconnector cables or
aerial sockets are often the cause of picture or
sound problems (sometimes the connectors
can become half disconnected if theTV set is
moved or turned). Check all connections.
Peripheral equipment gives a black and
white picture
You have not selected the right socket with the
If yourTV set breaks down, never attempt to
repair it yourself: contact your dealer's after-
sales service.
n key: S-VHS2 instead of EXT2.
To play a video cassette, check that it has
been recorded under the same standard (PAL,
SECAM, NTSC) which can be replayed by the
video recorder.
Cleaning the set
Only use a clean, soft and lint-free cloth to
clean the screen and the casing of your set.
Do not use alcohol-based or solvent-based
products.
The remote control no longer works.
Check that the mode selector on the side of
the remote control is set toTV.
Safety Information: Electric, Magnetic and Electromagnetic Fields (“EMF”)
1. Philips Royal Electronics manufactures and sells many products targeted at consumers, which, like
any electronic apparatus, in general have the ability to emit and receive electro magnetic signals.
2. One of Philips’ leading Business Principles is to take all necessary health and safety measures for
our products, to comply with all applicable legal requirements and to stay well within the EMF
standards applicable at the time of producing the products.
3. Philips is committed to develop, produce and market products that cause no adverse health effects.
4. Philips confirms that if its products are handled properly for their intended use, they are safe to use
according to scientific evidence available today.
5. Philips plays an active role in the development of international EMF and safety standards, enabling
Philips to anticipate further developments in standardization for early integration in its products.
10
L01_15534 (GB) 1-8_220705 7/22/05 10:23 AM Page 11
Glossary
RGB Signals:These are 3 Red, Green and Blue video signals which directly drive the red, green and
blue emitters in the cathode ray tube. Using these signals provides better picture quality.
S-VHS Signals:These are 2 separateY/C video signals from the S-VHS and Hi-8 recording standards.
The luminance signalsY (black and white) and chrominance signals C (colour) are recorded
separately on the tape.This provides better picture quality than with standard video (VHS and 8
mm) where theY/C signals are combined to provide only one video signal.
NICAM sound: Process by which digital sound can be transmitted.
System: Television pictures are not broadcast in the same way in all countries.There are different
standards: BG, DK, I, and L L’.The SYSTEM setting (p. 6) is used to select these different standards.
This is not to be confused with PAL or SECAM colour coding. Pal is used in most countries in
Europe, Secam in France, Russia and most African countries.The United States and Japan use a
different system called NTSC.The inputs EXT1 and EXT2 are used to read NTSC coded recordings.
16:9: Refers to the ration between the length and height of the screen.
Wide screen televisions have a ration of 16/9, conventional screenTV sets have a ration of 4/3.
11
L01_15534 (GB) Front page 7/22/05 10:33 AM Page 5
L01_15534 (GB) Front page 7/22/05 10:33 AM Page 6
L01 - 3111 256 1553.4
|